Is there a new link to the hitch? the one in the description isn’t working for me
@theyotaduo2 жыл бұрын
Try this link! www.trailerjacks.com/75236-118496-23-63845-Trailer-Tow-Hitch-For-05-15-Toyota-Tacoma-Except-X-Runner-Complete-Package-w-Wiring-and-2in-Ball?language=en¤cy=USD&gclid=Cj0KCQjwvqeUBhCBARIsAOdt45b3J7FtgvIKqd4if595OD6Xfa7KEzDEhCOOeLAshLa6ZWbOo3i0DCoaAuq2EALw_wcB If it still doesn’t work then go onto trailerjacks.com and it should still be available.
@jesuschavez67222 жыл бұрын
@@theyotaduo it worked!! Thanks 🙏🏼
@meganfnley3 жыл бұрын
Finally found a clear and in-depth video on how to install a tow hitch + WIRING on my tacoma, thank you!!
@theyotaduo3 жыл бұрын
That is awesome, thanks for watching!
@alvin24553 жыл бұрын
Lol funny how I was planning on adding a tow hitch to my truck and you made a video about it haha perfect timing.
@theyotaduo3 жыл бұрын
That's what I am here for man lol!
@kevinroberts89636 ай бұрын
Excellent informative video I followed it closely when I installed hitch and my lights. Good job
@stevicerated2 жыл бұрын
Man I want to personally thank you for making this video and providing the link for this tow package. I revisited the website that I ordered it from and I saw that they are no longer available. I feel lucky for buying one just in time. The instructions it came with kinda suck but they way you did step by step and especially for the ground made it much faster for me to finish, and yes I did this by myself 😅 was a struggle
@theyotaduo2 жыл бұрын
Man I’m glad to hear you found it helpful! And I believe you man I struggled myself lol. Luckily I had some help but this addition was well worth it! Thanks man for the support!
@stettan17542 жыл бұрын
Just installed the hitch tonight. Thanks to your video! I'll be installing the 4-pin another day.
@theyotaduo2 жыл бұрын
Im glad I could help man! 😎
@johnt96404 ай бұрын
Super informative and detailed video my friend, beat all others.. keep up the great work 👍
@jdtravels51402 жыл бұрын
Installed a Reese hitch on my 2009 Tacoma today. For me it was definitely a two person job…even with a floor jack. The most difficult part was installing the spacers. Highly recommend the Reese. It’s incredibly sturdy and well built.
@theyotaduo2 жыл бұрын
Yeah man. It was a challenge for me too but I’m glad you were able to install it. I think it’s weird how some of these trucks don’t come with one!
@leahcaswell66222 жыл бұрын
Great tutorial! Keep up the good work!
@theyotaduo2 жыл бұрын
Thank you!!
@nathanteegardin20769 ай бұрын
Great video- helped me out a lot👍 Only thing I would suggest is wiring first while you have more space
@theyotaduo9 ай бұрын
Good tip!
@Jack-ky4dy11 ай бұрын
Nice camera work.
@theyotaduo9 ай бұрын
Thanks!
@hbgomez46132 жыл бұрын
Amazing video brother, thank you. It's very helpful.
@theyotaduo2 жыл бұрын
Thank you bro!
@edunc952 Жыл бұрын
thank you so much for this video.
@theyotaduo Жыл бұрын
you are very welcome!
@jj-jk5ld10 ай бұрын
Great video, muchas gracias!
@davidmpower864 ай бұрын
Hello! Great video!! Will this work on a 4cyl toyota tacoma? Access cab!
@theyotaduo2 ай бұрын
Yes it will be the same steps as long as it’s 2nd gen 4cyl!
@MichaelMortensen-p7k Жыл бұрын
Perfect video brotha. Just picked up a 2010 regular cab and I’m thinking about adding a tow hitch. You explained it perfectly
@theyotaduo Жыл бұрын
Awesome man glad I could help!
@v052628 Жыл бұрын
Great video
@theyotaduo Жыл бұрын
Thank you!
@tomthatcher34442 жыл бұрын
Thanks for the great info..
@thadfoote86532 жыл бұрын
Thanks, great video might be able to do my own now,they wanted over 600 dollars to install one for me don't know if that's reasonable but think I can save few hundred doing myself,WISH me luck🤞
@theyotaduo2 жыл бұрын
Oh man $600 for a tow hitch install is a lot, I am glad this video came in handy for you. Good LUCK on the install man. Feel free to ask me any questions 😎
@henryvalenzuela39469 ай бұрын
Does the Reese hitch you installed fit as good as an OEM hitch ? Thanks.
@theyotaduo8 ай бұрын
I would say so
@juanjosemedina82723 жыл бұрын
Awesome video men like always!! Were you buy the accessory for the hitch "THE YOTA DUO"?
@theyotaduo3 жыл бұрын
Thanks man! I custom made it. I will be selling them on Instagram @theyotaduo. If you want one dm me for details.
@nadinealonso9432 Жыл бұрын
Any updates on the lift kit install? Do you have a lift in both the rear and the front?
@theyotaduo Жыл бұрын
Lift kit is going smooth. Spacer in the front & add a leaf in the back!
@lakei8884 ай бұрын
good! thanks.
@acihawaii3 жыл бұрын
Great on instructions and camera Extra hands under the truck with you, hummm.
@theyotaduo3 жыл бұрын
Thanks man, glad it was clear!
@jamesbroughton99002 жыл бұрын
Bruh i had to stop and rewind cuz I have the same color Tacoma and at 2:40 it shows that you also have the exact same dent in the bumper 😂
@theyotaduo2 жыл бұрын
Ayeee man! but you weren’t supposed to see MY dent 🤣
@gunbordom1007 Жыл бұрын
What about just using the factory hitch ? I see you have it on and was wondering how you would do it.
@theyotaduo Жыл бұрын
It doesn’t pull enough weight.
@AtelierDBurgoyne2 жыл бұрын
it's all clear but if you want to pull anything heavier than 1500 lbs, you will need a 7 pin connector to feed power for electric brakes on the trailer. Do you have instructions for a 7-pin connector and wiring for towing a trailer with electric brakes?
@theyotaduo2 жыл бұрын
Unfortunately I don’t have a setup for the 7-pin connector. I don’t pull anything greater than 1500 lbs as of yet but I’ll be sure to look into it and perhaps give you a reply when I figure it out.
@warrenlucier57967 ай бұрын
This is why this hitch doesn't work on the X - Runner: The ground effects package is also on the rear bumper and will be in conflict with the receiver on the hitch. How do I know this ? I know because I've installed the X - Runner bracing on my 2013 Regular Cab, and the rear brace will need to come off, so that the rearward lower frame rail mounting point can be used by both the hitch and the back of X - Brace. So if you've done this like I have it will work. I auto X my truck and have a lot of changes done to it.
@AndyTalksStocks3 жыл бұрын
what is the liftgate strut - the blue one on the left for?
@theyotaduo3 жыл бұрын
It’s actually a tailgate assist! Check out my channel, I have a specific video for the very convenient tailgate assist for the Tacoma’s.
@enderking69712 жыл бұрын
Do you have a lift kit on or bigger tires if so what kind are you using or what size wheels you are running with
@theyotaduo2 жыл бұрын
Yes I do actually. I have the 2.75” lift from Fat Bob’s Garage and 255/65r17 tires (30.05”)
@enderking69712 жыл бұрын
Can you make a video on them????
@theyotaduo2 жыл бұрын
@@enderking6971 We are working on it! We hope to upload the video out by this summer.
@outidenine76112 жыл бұрын
Do you have to run wire to the battery? also the link doesn’t work anymore
@theyotaduo Жыл бұрын
No , just connect the harness to the tail lights. Also, I updated the link!
@nickjcal28192 жыл бұрын
Would taking the bumper off make it easier to install hitch.
@theyotaduo2 жыл бұрын
Probably not since the hitch needs to be between the bumper brackets and the frame. It would be an inconvenience since the bumper itself holds the hitch in place.
@TheMainSilverSultan2 жыл бұрын
Did you need to put a lot of force to screw in their bolts into under frame? It's ridiculous hard.
@theyotaduo2 жыл бұрын
Yes it was quite hard for me as well. Patience and strength is the key!
@TheMainSilverSultan2 жыл бұрын
@@theyotaduo Chasing the holes with a tap made it much easier. I couldn't get the bolts in all the way. Got the proper chaser tool and I was able to put the bolts in by hand.
@richardzaring6249 Жыл бұрын
@@TheMainSilverSultan what is the tap thread size for the welded frame nuts?
@TheMainSilverSultan Жыл бұрын
@@richardzaring6249 M12 Thread 1.25 Pitch
@richardzaring6249 Жыл бұрын
@@TheMainSilverSultan thank you
@juparker212 жыл бұрын
Why is your bolts so easy to remove? On my 2011 it has welded on nuts and when trying to remove the bolts I need an impact wrench it seems.
@theyotaduo2 жыл бұрын
Not sure, I didn’t need any special tools to remove mines nor did they have any welds. Could have been rust maybe?
@juparker212 жыл бұрын
@@theyotaduo I can see tack welds holding the not to the frame and could not release with my hands. Strange. Thanks.
@stettan17542 жыл бұрын
What are the wires called?
@theyotaduo Жыл бұрын
T connector or tow hitch wiring harness, check link for more details!
@mr.pancakes19762 жыл бұрын
I'm not a egg anymore
@theyotaduo2 жыл бұрын
Your not? Haha. Miss ya lil bro 💙
@mr.pancakes19762 жыл бұрын
:)
@mr.pancakes19762 жыл бұрын
Dad misses you too hes gonna call you at night
@agnesbriley16372 жыл бұрын
I tried to use the code yotaduo5 and it says it's not valid on the website
@theyotaduo2 жыл бұрын
Hi there! The code has expired it was good for only 3 months. Sorry about that.