Finnally someone who can actually produce a step by step tutorial for how to install. People always skip certain parts and that's irritating
@ianfann2 жыл бұрын
Thanks 🙏
@AngelRivera-lr2yx2 жыл бұрын
Most useful lip install I’ve seen. Thank you
@ianfann2 жыл бұрын
Thanks 🙏
@wonkamywilly24562 жыл бұрын
Had this on my forte until I broke 2 of them. Upgraded to the Aerotekk front and side splitters.
@deporcali236 ай бұрын
How did yours break if you dont mind sharing ? I installed mine yesturday and broke same day driving 80mph on highway 🤦🏻♂️😂 smh
@wonkamywilly24566 ай бұрын
@@deporcali23 same and the other time was snow.
@mohamedshafiq1754 жыл бұрын
Hi bro, did you screw it in the body frame or there's already a grove for you to screw underneath the car?
@BNizam4 ай бұрын
bruh. It is screwed in the bumper;
@iaj75173 жыл бұрын
Great instructional video! You didn't need the music during your explanation! It is annoying! Otherwise great job!
@deporcali236 ай бұрын
Have you had issues with highway driving ? Any cracking ? I installed mine yesturday and now its gone from the middle ( cracked ) im guessing its bc its 4 pcs its not fully solid to be secured enough …. I mean ik its hard plastic but was expecting it to last more than 1 day 😂🤷🏻♂️
@Teramydog Жыл бұрын
why are you wearing a mask along in the garage?
@ezequielgarcia4591 Жыл бұрын
Hey they didn’t send me the screws could you help me out with the measurements??
@AlexEpikGamer Жыл бұрын
Do you have to drill to the car or is there holes in your car already? I really don’t know if I wanna drill holes in my car yet
@masonthegreat-1 Жыл бұрын
You will have to drill into the car. The plus side is it’s on the bottom so if you ever take it off no one will know unless they look underneath it
@konarider14696 ай бұрын
You don’t have this lined up correctly at all. Especially the ends. They should line up with the edge of your wheel well not stick out a mile.
@gasperblight9314 жыл бұрын
bro whats your car paint , and tyre rimm spec?, they look great
@ianfann4 жыл бұрын
Bro, my car is vinyl wrapped with satin gun metal grey, tyre is 17" 225/45 and my rims are stock 17"
@Ttunez834 жыл бұрын
Love the car and love your vids! Did you wrap the headlights? And also will you be adding side skirts to the car?
@ianfann4 жыл бұрын
Thank you so much for your compliment. Yes in fact I did wrap part of the headlights but avoided wrapping the lens in order to comply with the law. And yes I did install side skirts, in future I'll do a short montage of my car and I'll post it on my channel, stay tuned.
@Ttunez834 жыл бұрын
ian fann awesome can’t wait! I was wondering if the 2017 Elantra side skirts will fit on the 2017 forte. It’s so hard finding a kit in the U.S.
@jamilali36952 жыл бұрын
Nice video tutorial man :) and by the way i think its called a front splitter, not a front lip, front lip is different to this hahahah
@ianfann2 жыл бұрын
Thanks for the info
@far-red4 жыл бұрын
Nice SLX, mine is SLT im not a fan of doing such mod (cos im cheap) but i enjoying seeing other do it to their cars
@damonjohnson66713 жыл бұрын
60-100$ on amazon cdn
@tumelokhesa3012 Жыл бұрын
Installed mine with not enough screws and it flew off while driving....
@dreyusalexander7183 жыл бұрын
I’m mind blown I’ve been using the hook on the Jack piece the wrong way lmao wtfff
@samanthaallie19487 күн бұрын
Will this fit my 2013 ford fiesta sport
@imfat82073 жыл бұрын
anyone got link to these type on amazon or somewhere?
@claytonbugeja67912 жыл бұрын
did you make holes on the car bumper to attach the lid? or you had holes already? thanks
@ianfann2 жыл бұрын
No need to make holes, just use tapping screws and screw to the bottom of the bumper
@chickenoncheese4 жыл бұрын
Hey great video! Where can I get this lip? Thanks
@isaiac1653 жыл бұрын
It's definitely way too wide for your car. Maybe need to cut/modify to bring the sides in. Looks like your car has front mini wings.
@ianfann3 жыл бұрын
Hmm thanks, I might look into changing a new lip
@sitirazak81233 жыл бұрын
Hi ,can help to fix on my car.bought but not confident to fix on my own.will pay for it..thanks
@mikeymike3910 Жыл бұрын
there's a big Gap though at the sides 😩
@JackRR152 жыл бұрын
Idk how fast you guys drive but tape and self taps have never worked for me. Always had to use nuts and bolts.
@ianfann2 жыл бұрын
nuts and bolts would be more secure
@setdetnet50012 жыл бұрын
It's not right, looks silly, way too wide. That's because it's universal. Better off spending a few more quid to get a custom fit which looks way much superior
@ClassicAnt2 жыл бұрын
Can anyone tell me where you get the tag he has hanging from the front? Not that specific one but just those in general…
@kaedensmith8500 Жыл бұрын
they are just fake tow straps
@indosinfamilyreview2 жыл бұрын
Hi sir, did you pass your inspection for installing this ? TIA
@ianfann2 жыл бұрын
Yes inspection pass.
@Southsidefulldetail2 жыл бұрын
Looks so easy im gonna. Uy it to my wife's car
@fabiancarrillo11342 жыл бұрын
Hey brother how’s it been holding up since?
@ianfann2 жыл бұрын
I’ve since taken it down as I got into a small accident and it cracked
@JustMyFish3 жыл бұрын
It seems to me you’re winning it 🤣
@zeeunveil1324 Жыл бұрын
the bottom has to go in first... you have it reversed
@nolimitspodcastt Жыл бұрын
What do I do if I made one side of the lip a little bit higher then the other side
@zepp3lin2 жыл бұрын
Shoppe selling it cheaper than amazon.
@2K1Breezy3 жыл бұрын
Looks very nice👍 , going to get one for my car. Great video👏🏻
@ianfann3 жыл бұрын
Thanks! 👍
@terrelldean94813 жыл бұрын
sorry to be offtopic but does anyone know a tool to get back into an Instagram account?? I was dumb forgot the account password. I would love any tricks you can offer me
@jackbowen87063 жыл бұрын
@Terrell Dean instablaster :)
@KeylorSwift11 ай бұрын
How much should I pay for installation of all this assuming I have the parts. 2016 Chevy spark Fender flares, front lip splitter, rear spoiler, mud flaps, window tint visors, full window tint, wheel cover, bumper fasteners, and paint correction on the hood which has some scratched areas and needs 2 stickers removed with a heat gun. Asked one shop so far and guy said somewhere around 8500. That seems kinda high.
@MMGDres8 ай бұрын
Bro he overcharged you to the moon, find a small shop or honestly you can do it all yourself with some tools except for the window tint
@MMGDres8 ай бұрын
If you need help doing it I’d be willing to help through the phone I’m 20 been a car painter for 3 years and know how to buff/ bodywork etc pretty good
@MrFamilyMoments4 жыл бұрын
You should of took off your bottom stock lip on bumper first. Blocking your lip
@jaychez56103 жыл бұрын
Any eBay or Amazon links to buy one similar to this? I bought one a while back but it’s way different from yours. It came with two center pieces that stack on top of one another but it doesn’t align with my car well...
@ianfann3 жыл бұрын
Hmm I don't usually shop on Amazon so not sure if they sell it there but having said that, this is a universal lip and there are a few designs in the market for you to choose from and you will need to look at the dimensions, design and fit before you make your purchase.
@jaychez56103 жыл бұрын
Thanks for the reply... btw What’s this design called? And around how much does it cost?
@ianfann3 жыл бұрын
Hmm, there wasn't particular name to the design I bought. It was just called universal front lip.
@jaychez56103 жыл бұрын
Alright well I appreciate it. Nice car btw!
@danieldenev7 ай бұрын
will this fly away at 250kmh?
@zbyneksurovec3 жыл бұрын
why are you barefoot tho..
@RiBA__3 жыл бұрын
Is it illegal? did your feelings get hurt? are you losing sleep over this? wtf do you care if a person is barefoot or not, ur saying it as if it’s forbidden to be barefoot in a video. this man just provided you a tutorial in which you can learn to install a splitter to your car and all you care about is this guys feet.
@noahjohnson9323 жыл бұрын
@@RiBA__ damn bro calm down lmao
@brianwasmund75683 жыл бұрын
I'd love to have a shop that clean enough that I could go barefoot
@itz_tsmooth11054 жыл бұрын
Can you send the link
@ianfann4 жыл бұрын
Link to buy if you are in Singapore : facebook.com/superdbealsg/
@jms75852 жыл бұрын
Step 1: use a better jack!
@metals994 жыл бұрын
I installed mine thanks bro for the guide! I am just concern if I should take the lip out during LTA inspection. Would you think this will be a concern? Thanks!
@ianfann4 жыл бұрын
Hmm I don't think it would be an issue during the inspection
@robfirestone84422 жыл бұрын
Sis you still directly into the bumper frame on the sides? I am attempting to install one on my Kia K5, but want to ask first
@ianfann2 жыл бұрын
Direct screw to the bottom of the bumper bro
@LenzShankz3 жыл бұрын
installed on my bmw last week. completely ripped off and shattered to pieces when reaches 160km. this thing is not for speeding. btw nice vids.
@ianfann3 жыл бұрын
Hmm, did u install lots of screws?
@xbrojasx27493 жыл бұрын
Bruhh 😂😂😂
@casuallycycling933911 ай бұрын
Lmao. That’s what always comes in my mind when i see these things. Like it’s a plastic with little screws on another plastic, any real downforce on the car and it will rip off immediately. Aftermarket lips are only for looks/ aesthetics.
@UziSal3 жыл бұрын
Can it fit my 2015 mazda 3 sedan?
@ianfann3 жыл бұрын
This is a universal front lip, but you will need to consult with your seller on this.
@UziSal3 жыл бұрын
@@ianfann does universal mean fit all car?
@ianfann3 жыл бұрын
Yup it should fit most saloon cars but please check with your local seller before buying.
@lalhruaipuia64253 жыл бұрын
Can i use this on getz car
@xbrojasx27493 жыл бұрын
Where the link to get it
@ianfann3 жыл бұрын
Link to buy : bit.ly/3egJFVt
@aaronamix54623 жыл бұрын
@@ianfann Link inactive.
@ianfann3 жыл бұрын
Hmm looks like the seller has stopped selling.
@aaronamix54623 жыл бұрын
@@ianfann Watching your video. Good job. Kindly do a follow up so we can know how it performed after some months.
@ianfann3 жыл бұрын
Ok sure 😊
@adreyan5123 жыл бұрын
Does affect the humps
@RaoWarriorGaming11943 жыл бұрын
Thank you 😊
@MahaloFitteds8083 жыл бұрын
Does that lip come with pre drilled holes?
@ianfann3 жыл бұрын
Nope it doesn't
@wopee13 жыл бұрын
🤣🤣🤣🤣👌
@bryan65513 жыл бұрын
May I know how the lip is holding? Will it drop out when driving at high speed? And will kenna scrap when driving over hump?
@ianfann3 жыл бұрын
So far the lip is holding up no issues and doesn't scrap the humps.
@bryan65513 жыл бұрын
What about LTA inspection? Got any issue?
@ianfann3 жыл бұрын
No issues, I passed LTA inspection with the front lip on
@blackpanda76122 жыл бұрын
@@ianfann Thanks for confirming the lip is still holding up. For extra safety I'll use extremely strong double sided tape and probably screw in a few more self tapping screws. But have to say this is one of the most straight forward videos to follow. I'm really looking forward to fitting these parts myself. Thank you for sharing
@iamsyrox72183 жыл бұрын
Can u send the link on where u bought it
@ianfann3 жыл бұрын
Link to buy : bit.ly/3sXNBOJ
@angelicatenoso2 жыл бұрын
What is the name of the equipment did you use like a gun? Thanks
@ianfann2 жыл бұрын
You mean the heat gun?
@rubinthebear Жыл бұрын
Turn the bloody music off. WTF
@rubinthebear Жыл бұрын
Would have been good if I could hear your instructions instead of listening to that annoying background music.