How to Jailbreak Nintendo Switch 18.1.0 // Atmosphere 1.7.1 Hekate 6.2.0 Tinfoil 18 // BEST GUIDE

#switch #nintendoswitch #atmosphere #hekate #switchjailbreak
/ @idx3tutorials
🔥 Thank you for watching! Subscribe and hit the notification bell!
Attention! This tutorial is for Unpatched Nintendo Switch V1.
For other Switch consoles, you must have a modchip installed.
Before the process, check the status of your switch on this site: ismyswitchpatc...
Hi everyone. I will not confuse you in this tutorial, we will do it quickly in just a few steps.
At the end of the video your switch will be successfully modded and after that you
can watch the videos below how to protect yourself from Nintendo Ban,
install .nsp/.nsz files and much more...
If you have any questions, feel free to leave a comment below or message me on IG!
Files:
mega.nz/file/v...
90dns alternative:
• How to Avoid Getting B...
Complete list of switch tutorials: • Nintendo Switch Tutorials
🌐 Connect with me on social media:
/ gameroomdnd

[@IDX3Tutorials]

If you have a cheap (fake) sd card, expect that it won't work. Those sd cards have strange names (SanDian), "large capacity" and they are cheap. Instead, buy a quality sd card from brands such as SanDisk, Kingston, Samsung, etc. *Update: Tinfoil 18 just came out and has been added to the pack. At the time of recording the tutorial I was using hekate 6.1.1 but I included the latest version 6.2.0 in the package (don't be confused by that).

[@Rayoski321]

thanks for adding tinfoil

[@IDX3Tutorials]

@Rayoski321 You're welcome!

[@westbankdanny]

How do I get hbc

[@veligole5204]

Let's assume that the Nintendo Switch is broken. Are these the steps we need to do from scratch to SD card?

[@adrialthegoat2446]

wait so after i do all this i will see tinfoil in my albums?

[@lonniebrown1468]

i followed many guides. yours was the first to yield me good results. should have came here first. subbing

[@IDX3Tutorials]

Thank you for the sub 🙂

[@NEVERKNOWSBE5T]

I spent all day trying to update my CFW on my Switch I haven't used in like a year and everything went wrong. Literally followed this guide and less than an hour (mostly waiting for installs) it's all setup perfectly. Thanks so much

[@IDX3Tutorials]

I'm glad to hear that! 🙂🙏

[@doman6257]

Watched like 10 videos and none of them worked except for this one. Thanks a lot!

[@IDX3Tutorials]

You're welcome 🙂

[@MihaiFuaa]

The only guide to actually work. Subbed, keep up the good work!

[@IDX3Tutorials]

Thank you for the sub 🙏

[@alberthespinoza551]

gaaah leee boiii been looking for a quick video like thisone forever lol.... subscribed!

[@IDX3Tutorials]

Thanks for the sub!

[@TBoneSan]

Bro Cheers! what a no-nonsense guide. After hours of time waster guides, you just make it so simply. Was done in 10 mins as it should be

[@IDX3Tutorials]

Glad to hear that bro! Greeting to you!

[@jamieturner3639]

Super easy guide process was completed in less than 25mins ❤

[@IDX3Tutorials]

Thanks for the feedback.

[@jarredbrown8888]

Thank you for including the all in one. No dead links 😁

[@IDX3Tutorials]

You're welcome!

[@sikemosa]

Awesome video and love your responsiveness, mate. getting a new switch soon so i can try this on my first gen switch. checking everything now.

[@IDX3Tutorials]

Thank you mate! Welcome to the club! 💪

[@V3locity200]

thank you so much after 6h i finally came to the right guide!!!!!

[@IDX3Tutorials]

You're welcome 🙂

[@A_Puzzle]

Only tutorial that actually worked. Earned my sub and like.

[@IDX3Tutorials]

Thank you for the sub!

[@xvipafirex]

Best guide so far! worked perfectly!

[@IDX3Tutorials]

Thank you 🙂

[@stefanomonni9392]

One of the best tutorial I ever found, simple, quick, complete, thank you , you made my day. Subscribed.

[@IDX3Tutorials]

You're welcome 🙂

[@sikemosa]

This was a solid entry point for me, super easy to follow and worked immediately. This guide follows an emuMMC(emulated operating system, basically) that runs off the SD card. The emuMMC in the video is being created as a file on the SD card (4:40). From what I read online, the partition method is more fast/more safe in terms of performance and brick protection, respectively. Was there a reason to use the SD file over the partition? I could be totally wrong! i just started haha. was reading about this on reentry thanks for posting this and getting me into the rabbithole lol. cheers!

[@IDX3Tutorials]

There are several reasons why I practice SD File based emuMMC. One of them is that I like to keep it simple. And the second is that I have never been able to run Partition based emuMMC on one console. There's nothing I haven't tried to solve that problem and I haven't succeeded. Regarding speed and other things, I didn't notice any difference or have any problems with SD File based emuMMC. It's just a theory for me. So I suggest that you don't bother with unimportant things and do what suits you better. Greetings to you my friend!

[@sikemosa]

@@IDX3Tutorials Thank you for your input man! I completely agree the SD card file is way easy by comparison, this seems a bit more involved. I'll let you know how it goes, I'm definitely going to at least give it a try, reading a shit ton about everything x) I really appreciate your response my guy, hope youre having a good day so far:D I'll send the rentry post if you'd like, it is an interesting read

[@oscarbatres2079]

bro you are a god i cant thank you enough!! everything works perfect now i subscribe to the channel. keep up the good work!!

[@IDX3Tutorials]

Thanks for the sub!

[@mugenmike911]

Nice tutorial, Subbed!!

[@IDX3Tutorials]

Thanks 🙂

[@KuroiMeansBlack]

Thankyou so much I subscribed :3

[@IDX3Tutorials]

You're welcome! Thank you for the sub!

[@jeriel_ts]

Thx dude i really appreiate that u saving me rn , je te souhaite du courage pour la suite je t'envoie de la force depuis la France !

[@IDX3Tutorials]

You'rewelcome, greetings to you my friend!

[@TrevBauer]

Hands down best guide, thanks!

[@IDX3Tutorials]

Thank you 🙂

[@saleemrustom5827]

Nice guide! I wonder of a back-up step is needed before proceeding with the guide? I have nothing on my Switch, it's a pretty fresh V1. Another question as I'm very new to own a Switch. Injecting payload is necessary in case of a total power-off, to be able to boot again into Emunand. Is there anyway to make (Emunand) the default booting by change the boot order somehow😅? I read about AutoRcm as a method to skip the rcm jig, do you think it's something preferable or not? Any Android app recommendations for injecting payload? Thanks in advance

[@IDX3Tutorials]

Yes, every time it shuts down completely you have to inject payload and launch cfw. It's not hard, don't be lazy 😀 And don't play with auto rcm! Leave it off.

[@saleemrustom5827]

@@IDX3Tutorials haha thanks for the answer! About the back-up step is it something necessary? And do you have any guide for it? Would you recommend the Rekado injection app for Android?

[@IDX3Tutorials]

@saleemrustom5827 You can make a cloud back-up if you have save data on it before you format the sd card. As for the injector, use what suits you.

[@aungpyaesone4609]

Woah Great job man

[@IDX3Tutorials]

Thank you!

[@Nik.305]

Hey man. I'm currently following your guide, but this is completely unrelated.... but I NEED that screensaver 😍 Where did you get that from?!?!?!?

[@IDX3Tutorials]

Wallpaper engine on steam

[@konebakary7843]

Thank man for you tutorial

[@IDX3Tutorials]

You're welcome 🙂

[@valerioboccaccini4390]

Good tutorial thanks! Just a question: if the Switch is restarted... I should run again TegraRCM with usb connected right?Thanks

[@IDX3Tutorials]

Exactly!

[@valerioboccaccini4390]

@@IDX3Tutorials use internet connection without launching the Homebrew should be not a problem... that's right? My Switch is primary used but my daughter (6 years old) and I would like to BLOCK Tinfoil (to avoid unusual activity). Do you know how I can do? I would also like to block the "album icon" with all the modded utility. Any idea?

[@xokawaiiliciousxo]

I just want to double check, is the file package from the mega link you provided also include the sigpatches in the package too or do I need to download that separately? I want to make sure before I download the file and get started on updating my switch.

[@IDX3Tutorials]

Yes, sigpatches are included.

[@HalcyonXVIII]

After following this guide, I turned the Switch off for the night and now when i turn it back on, its reverted back to normal

[@IDX3Tutorials]

Every time you shut it down completely, you have to inject the payload again and launch cfw.

[@pinhal222]

Hey Dude I cant find one of your videos that I was watching in june this year..... I was addicted to the song, it was more or less eletronic and a girld voice in the background echoing like" I just want to live a new day...." I dont know for use if this what she says, since thevoice sounds echoey and in the background.

[@IDX3Tutorials]

A New Day by Ethan Sturock (FTUM release)

[@fahadbinobaid7342]

you are a legend

[@IDX3Tutorials]

Thank you!

[@h3ryfx]

*QUESTION* I already have a 32Gb sd card with games on my switch (unmodded yet). Would you recommend having 2 sd cards like the 32gb for the ofw and new sd card for the cfw??

[@IDX3Tutorials]

Yes, you can. But keep in mind that you need at least 64gb for cfw.

[@h3ryfx]

@@IDX3Tutorials yeah I will buy a 512Gb soon🤩🙏🏻

[@rankomf]

do you know to get homebrew appstore on it ? , btw great vid

[@IDX3Tutorials]

kzbin.info/www/bejne/sHfCpJZtbrOBgLs

[@fakewolf3434]

Hello from Greece. May I have a question. After this jailbreak method, if the console close, normal closing not a sleep mode, we will need to perform a jailbreak again, or it will be active after the opening of switch? Thanks. 🙏

[@IDX3Tutorials]

Hello, I will visit your sea soon! Unfortunately after every shutdown you have to re-inject the payload to be able to launch cfw. But everything remains, you just need help to launch cfw.

[@sgdsabobo]

@@IDX3Tutorials so I'm new to switch jailbreaking. This guide don't need a mod chip right? Is the advantage of a mod chip is you don't need to re-inject the payload, am I correct?

[@RetroGamer-cn9or]

@sdgsabobo If you have a v1 Switch that's unpatched (see website in video) then you don't need a modchip. With v2, OLED, and Lite Switches, the only way to jailbreak is with modchip. And yes it injects the payload for you so you don't have to do it manually like a v1 Switch.

[@interne_deleted_videos]

bro allways forgot to put airplane mode thats funny bro continue😁

[@IDX3Tutorials]

I get it when I launch cfw, because that's when the magic happens 😅

[@user-ik5zl7gq4h]

Thnx for Tuto...its work fine.. i want ask u about the FW update manualy (offline)... i need to use sysnand or emmunand to install ?it?

[@IDX3Tutorials]

Emunand. You can also find a tutorial for the update on my channel.

[@user-ik5zl7gq4h]

@@IDX3Tutorials i have black secreen after update and still is on FW 17.0.1... i used daybreak to install it... i will tray again with ur files

[@IDX3Tutorials]

@user-ik5zl7gq4h kzbin.info/www/bejne/fGKne3yZbaisqcU follow this guide.

[@Iby00]

Nice worked, had to install NUT too off tinfoil, but was super easy then, once you locate where to download the game. Although launched the game, doesnt seem to be up to date, but you can cancel the update, launch the game, but then the game seems to want to update in the background which is worrying? DNS wasnt blocked, so done that again. ah so tries to update in the background now, but not working i think. But before I re-blocked the DNS it was "updating" in the background I think, so have I messed up? Will the switch be banned? Need to find a more up to date to get the games.

[@IDX3Tutorials]

DNS blocking is the first thing you should do after jailbreaking. I hope you were lucky and didn't get banned.

[@SethEvans-y8z]

Wait, so if the website says my switch is most likely patched does that unfortunately mean I have no way of installing this onto my Nintendo Switch or is it still possible? I guess that's what I didn't quite understand

[@IDX3Tutorials]

There is no way without hardware modification.

[@philmonet8650]

Hi, for someone that is completly new to modding, what else should I watch beside the "how to not get banned" video? If I dont know how about any of the stuff like Awoo, Tinfoil, , exosphere, etc

[@IDX3Tutorials]

HI,You can write to me on IG and I will explain

[@user-qv5do7vz5l]

My little sister updated my switch now I have to do it again (before it was on update 16) Any issues I should know about

[@IDX3Tutorials]

If you follow each step there should be no problem. Happy modding!

[@talehvlizad5915]

hello brother i wanna thank to u for your wonderfull video but i have one question for your. i have v2 switch and i did not do anything on it. i mean its original can i jailbreak mine or not?

[@IDX3Tutorials]

You can't bro. You need a mod-chip.

[@YarnYoshi_offical]

when i run cfw emu mmc it says "panic occurred while running atmosphere" pls help

[@IDX3Tutorials]

kzbin.info/www/bejne/mn_Zcn-Ppc6XlaM

[@YarnYoshi_offical]

@@IDX3Tutorials THANK UUUU SOO MUCHHH AAAAA

[@IDX3Tutorials]

You're welcome!!! 🙂

[@hoki1985]

Hello on the page where you can check. I have XKJ written on the switch and this is not mentioned on the page!

[@IDX3Tutorials]

That means you need a mod-chip.

[@Edi8RI]

can i just ask question,is that just installing on sd card ? so when i will take that sd card he will not go in any sort of mode he will go directly to normal official version of switch ?

[@IDX3Tutorials]

Exactly

[@Edi8RI]

@@IDX3Tutorials thats great ,thanks mate! also quick question when u are in mod after installing a game are you able to perfrom update of game if needed ofc while have 90dns on? thanks for you help!

[@IDX3Tutorials]

@Edi8RI When you are in cfw, you cannot use nintendo services. You can install game updates using tinfoil. You can contact me on ig, I will help you with that.

[@xdsmastermia]

​@@IDX3Tutorialscan you go online with cfw on emmunand? I mean to use the homebrew app store etc? Not to play.

[@IDX3Tutorials]

@@xdsmastermia If you used my jailbreak method then you can.

[@skyglidestudios3443]

hey there! Quick question. So the switch that just got a chip installed. Whats the process? Just plug in, drop files on switch and inject? Thanks in advance :)

[@IDX3Tutorials]

everything is the same as in the video, only you don't have to use tegra rcm because you have a mod chip.

[@skyglidestudios3443]

@@IDX3Tutorials So I just flash it via cable. And then ad files to sd card to booth from?

[@IDX3Tutorials]

@skyglidestudios3443 Once you put the files on the sd card just turn it on and continue the process.

[@skyglidestudios3443]

@@IDX3Tutorials Ok. So I dont need to flash anything. Just put the files on the sd card.

[@IDX3Tutorials]

just follow the steps

[@vvembuttu9189]

you helped a lot

[@judie2313]

5:28 , mine popped up saying "panic occurred while running Atmosphere" Title ID : 010041544D530000 Error : std : : abort (0xFFE)

[@IDX3Tutorials]

kzbin.info/www/bejne/mn_Zcn-Ppc6XlaM

[@judie2313]

@@IDX3Tutorials thank you, now i got a new issue when i try to block the servers on 90DNS testing , it says "unblocked" instead of blocked and 2 said unresolved

[@IDX3Tutorials]

@judie2313 make sure you are connected to the internet before running the tester. restart the home internet if necessary

[@judie2313]

@@IDX3Tutorials great I managed it, i cant seem to open tinfoil, when i open it it says "could not start software"

[@critiquetest2594]

Would this work if I updated a previously modded v1 switch to 18.1.0? Basically tinfoil etc was working but pressed update and everything broke. so do I have to re do this process or it’s bricked?

[@IDX3Tutorials]

kzbin.info/www/bejne/fGKne3yZbaisqcU follow this tutorial.

[@JesusLopez-bk9kg]

this tutorial is great but when I tried injecting the payload it says "Couldn't open payload file 'C:\Users\dani_\OneDrive\Desktop\SD Files\hekate_ctcaer_6.1.1.bin' for reading Error while injecting payload (RC=-2)"

[@IDX3Tutorials]

You have to select the payload from your computer.

[@JesusLopez-bk9kg]

@@IDX3Tutorials thank you. My switch was patched the whole time

[@IDX3Tutorials]

You have to check that first

[@diddye]

Is this the latest tutorial im getting my v1 switch this week

[@IDX3Tutorials]

Yes, this is the latest one. Welcome to the club!

[@MissChiiru]

Hello! Will this work on a Switch OLED 18.1.0 with a mod chip installed? Thanks! ❤

[@IDX3Tutorials]

Yes, just follow the steps.

[@Honeymaus2186]

Hello. :) I download the file from the infobox, but there is "hekate_ctcaer_5.0.0.bin" inside, not 6.2.0. Is this right so?

[@IDX3Tutorials]

No, it's 6.2.0 in the package. If you are trying to update an already jailbroken switch, you have a tutorial for that on my channel.

[@ZeraoDz29936]

Thank you bro

[@IDX3Tutorials]

You're welcome!

[@ZeraoDz29936]

I was stuck really thank you I Subscriber

[@andrewthompson6799]

Does it include new sigpatches as well?

[@IDX3Tutorials]

Sigpatches included

[@HYTFallen]

does XKW work with this? i have a XKW

[@IDX3Tutorials]

You can check at the link below

[@justmime7956]

what do i do when it keeps saying no rcm device detected? I've done all the steps but I'm just stuck on this one part.

[@IDX3Tutorials]

Have you checked if your switch is unpatched? If so, then the problem may be caused by the USB cable or the driver.

[@IDX3Tutorials]

Have you checked if your switch is unpatched? If so, then the problem may be caused by the USB cable or the driver.

[@hipes4929]

will this work on any switch even patched ones ?

[@IDX3Tutorials]

Yes if you have a mod-chip installed

[@abrahamajibade4572]

Hi Thanks for the great guide, i've completed most of the steps but when i get to the 90 dns setter, one of the last lines before it reboots says "something went wrong" when it restarts, the dns checker says unresolved, how do i fix it please?

[@IDX3Tutorials]

kzbin.info/www/bejne/naW5q6Kcraxsh5I do this.

[@abrahamajibade4572]

@@IDX3Tutorials Thank You, i tried it and it worked, the logs show successful rerouting! You're the best! Keep up the good work!

[@IDX3Tutorials]

@abrahamajibade4572 Thanks for the kind words!

[@vnz4911]

Hi how to erase all of these if I want to go back to un-jailbroken switch? Thanks

[@IDX3Tutorials]

Just format the sd card.

[@jermainesanlenesbarcelon6983]

why my nintendo switch lose the jailbreak after shoutdown? and how to back again

[@IDX3Tutorials]

That's normal, just inject the payload and launch emummc.

[@kritbenyasmith8452]

hi how long does it take for inject payload done? it's seem forever to me. (stuck on hour glass with yellow background)

[@IDX3Tutorials]

Have you checked on the website below if your switch can be jailbroken?

[@kritbenyasmith8452]

@@IDX3Tutorials thanks for your reply, sadly, it's patched.

[@user-dw8oz1cu4r]

Which cable should I use to connect the switch to the computer?

[@IDX3Tutorials]

It depends on your computer. On the side of the switch, you need usb c.

[@tgred9721]

What happens when the console eventually powers off? Do I need to reinstall everything? I’m confused

[@IDX3Tutorials]

No, just inject the payload and launch CFW - emuMMC

[@tgred9721]

@@IDX3Tutorials thanks 🙏🏼

[@aresfall]

When I try to launch cfw -emmuMMC it says a panic occurred how do I fix that?

[@IDX3Tutorials]

kzbin.info/www/bejne/mn_Zcn-Ppc6XlaM

[@christiaansmith107]

My switch didnt boot up hekate when I injected the payload even though it says the payload was successfully injected, did I do something wrong?

[@IDX3Tutorials]

Probably your switch is patched. Did you check the website? You have the link below.

[@christiaansmith107]

@@IDX3Tutorials it said it was possibly patched, so I'm guessing it is

[@IDX3Tutorials]

That's right

[@alenmulahusic4653]

doesnt work for me, when i try to setup says NO RCM, but RCM is physically in... and when i try to turn on Switch with power button+power up, nothing happens, and when i plug it into PC via cable, automatically turns on

[@IDX3Tutorials]

Hold + and press the power button. If it won't detect, maybe you need to install the driver from the settings tab. But first of all, check on the website whether your switch is unpatched. Link in video description.

[@theDmiller22005]

@@IDX3TutorialsI can’t press inject payload

[@jorgecanossa]

can you solve your problem !! i have the same issue

[@dasmettbrot9028]

why does my switch turn on while getting into rcm mode

[@IDX3Tutorials]

You did something wrong or your switch is patched.

[@dontruecorleone7505]

Hi, i have just bought my very first unpatched v1 Nintendo Switch current system version 13.0.0 as well as ( RCM JIG , 256gb SD Card and a SD card adapter). The only thing i have done is format my 256gb SD card to FAT32. I have not connected my switch to the internet or signed into my Nintendo account. Could you please help me on what to do next!?

[@IDX3Tutorials]

Just follow the guide

[@dontruecorleone7505]

@@IDX3Tutorials Thanks to you i have successfully installed the jailbreak following your video without any errors. it was one of the simplest and easiest guide ever.

[@IDX3Tutorials]

​@@dontruecorleone7505 I'm glad to hear that! 🙂

[@MailAcaso-ou2xk]

when do you do the tutorial to update an existing custom firmware?

[@IDX3Tutorials]

Tomorrow will be on the channel.

[@macho-zq1im]

bro thank you~! How do I install android 14 on nintendo? please make a tutorial !!

[@IDX3Tutorials]

You're welcome!

[@milosvasovic4566]

Hello, just one question : tinfoil 18 doesn't have newest games, while in their site they have almost all of them, is there any way to refresh library of games?

[@IDX3Tutorials]

Milose,pisi mi na ig

[@meltingx]

Hey so when I try to reinstall one of my games it says "A server communication error has occurrred." I looked it up online and people are saying that it means you are banned. Is this true?

[@IDX3Tutorials]

If you try to install the game in cfw, it won't work. You can only use Nintendo services in stock firmware.

[@meltingx]

@@IDX3Tutorials ohhhh you’re right. Thank you!

[@IDX3Tutorials]

You're welcome

[@meltingx]

@@IDX3Tutorials Do I need to use 90 DNS every time I add a new wifi network? Also I saw on a thread online that said it is not good to have only 90 DNS as the main protection. They were saying to also install atmosphere redirect tool and exosphere. Should I install those?

[@IDX3Tutorials]

Yes, every time you add a new network, you have to repeat the 90dns process. I think that 90dns is quite enough, but if you want additional protection, why not...

[@jugodenaranja3338]

thanks bro

[@IDX3Tutorials]

You're welcome 🙂

[@vvegasa]

@IDX3Tutorials hey, No matter what I try, I cannot launch CFW - emuMMC. It gives an error and in "emuMMC info & selection," it shows that its disabled. Can you help me? I tried both your old and new videos, but none of them work

[@IDX3Tutorials]

If it says Disabled after creating emuMMC, the sd card is probably bad or of poor quality. Try another one.

[@vvegasa]

@@IDX3Tutorials Its a Xiaomi 1T SD card. I saw other people use it as storage for Nintendo. Could something else be the problem? Because with my old 64GB SD card, your old video worked a month ago

[@vvegasa]

@@IDX3Tutorials Is there a way to enable it manually? I saw another KZbinr create an SD partition instead of an SD file, but that didnt work for me either

[@IDX3Tutorials]

@vvegasa You can try. Press "select emuMMC" and then select it.

[@vvegasa]

@@IDX3Tutorials Did that but it does not work (( thanks anyway for the response

[@NEEDForspeed-ny6xl]

Hi can u upload also update offline switch 18.1.0 update with Atmosphere and Hekate Just like you did before Or this is much easier method update the switch first then jailbreak?

[@IDX3Tutorials]

In a few hours, there will be an update tutorial on the channel with all the necessary files.

[@fuck_fiat_money]

@@IDX3Tutorials Does a cwf also run on the latest fw?

[@ShinyHunterTriForce]

dont know but i updated my switch by mistake and my tinfoil dont work now and i deleted it to reset now it just say unable to start software retun to home menu and try again and i did and says the same thing??

[@IDX3Tutorials]

New version of Tinfoil is out. Version 17 no longer works.

[@ValeZ-sk9cr]

I have a question. I bought switch that has hekate, but guy didnt used it long time. Do i need first to update software, and then transfer games? And how to access browser for youtube and stuff like that? One big thing that i wana ask is, can i change that i play on another account online games free from switch, and other account for modded?

[@IDX3Tutorials]

It would be best for you to start from the beginning like in the video in order to understand the jailbreak. At the end of the process, you will have emummc, which is a completely separate system and you use it for mods, etc. You also have the stock firmware that you use for online and Nintendo stuff.

[@Nik.305]

Hi. When I inject the payload, I get the following error: Missing lp0 seel lib! Missing minerva lib! Update bootloader When I press any key as it says to do, it says there's no payload found and no ini file. It also says warning: nyx is missing. You help would be much appreciated!

[@IDX3Tutorials]

You put the files in the wrong place

[@Nik.305]

@@IDX3Tutorials but how is that possible if I follow your exact tutorial?

[@IDX3Tutorials]

You missed something. Just try to copy the bootloader folder from the aio package.

[@Nik.305]

I just realised what I did. I copied the SD File folder into the root of the SD card, instead of copying what's in that folder and putting it in to root 🤦🏽‍♂️ I spent hours trying to troubleshoot last night and just fixed this in seconds lol. Thanks!

[@IDX3Tutorials]

@Nik.305 Glad you made it

[@FraB-bo3di]

i got a problem, when i go into cfw- emuMMC the screen stays black

[@IDX3Tutorials]

Is emummc enabled? What sd card are you using?

[@FraB-bo3di]

@@IDX3Tutorialsthe problem is not about the sd card since it worked before but it’s not with emummc either

[@IDX3Tutorials]

Try to put the old hekate_ipl.ini file in the new files. It is located in the bootloader folder.

[@Webecruising]

Works great! Any way to make it boot to homebrew after a power lost? It just reboots to standard firmware and Only way to get it back is to run Tegra. Thanks.

[@IDX3Tutorials]

That's the only way, my friend

[@Webecruising]

@@IDX3Tutorials appreciated. I thought i was missing something.

[@Fl8she]

hey man, i can not install games anymore using the tinfoil store. Is there any other way?

[@IDX3Tutorials]

There is a tutorial on my channel for installing .nsp files.

[@ZayWizard]

Hey man im having a problem. I recently got a new sd card and its a 2TB FAT32. I did all the steps but I'm it would show "emuMMC is disabled and eMMC will be used for boot". When i try launching atmosphere it wouldnt work and would show an error.

[@IDX3Tutorials]

I'm guessing it's some cheap noname sd card and it won't work

[@ZayWizard]

@@IDX3Tutorials I mean I _did_ get it for 3 bucks.

[@impxcker]

Everytime I try to launch emuMMC after completing every step it says a panic has occurred while running atmosphere and an error screen appears. Any suggestion on how to fix this?

[@IDX3Tutorials]

kzbin.info/www/bejne/mn_Zcn-Ppc6XlaM

[@crissanchez413]

the music n the picture of your help not one bit bro calm on

[@IDX3Tutorials]

Bro, why are you nervous? It's just music...

[@KoSnody]

Hi great tutorial, when i try create the emuMMC it finishes & says disabled emuMMC disabled and eMMC will be used for boot. any advice? thanks

[@IDX3Tutorials]

The answer is in the pinned comment.

[@KoSnody]

@@IDX3Tutorials i have resolved this issue now thankyou. I have another problem however, i run the 90dns setter, reboot and then run the 90dns tester & every region says 'unresolved' any advice? Thanks

[@IDX3Tutorials]

@KoSnody Did you turn off airplane mode before testing? You must be connected to the Internet for this check to pass.

[@KoSnody]

@@IDX3Tutorials yes I did, I managed to sort it by copying a file with the ips blocked onto the sd card from another tutorial & then the test was successful. Thankyou

[@imanuelsetyo2348]

Hello, I have a V1 hardmodded with chips. Would I still need to do the entire process with the RCM jig?

[@IDX3Tutorials]

No,just put files on the sd card.

[@joseluisrenteriaaragon4618]

bro thanks for the tutorial, but can you help me with one issue, when i was trying to boot atmosphere emummc the screen turned black and nothing happenned

[@IDX3Tutorials]

Try with sd partition based emummc but first delete the emummc folder from the sd card. With some consoles, sd file based will not work.

[@joseluisrenteriaaragon4618]

@@IDX3Tutorials thank you for your response, but i have one more question if it isn't much problem, how do i do that, where can i find the sd partition based emummc

[@IDX3Tutorials]

When you get to the step to create emummc, you have to choose partition or file based emummc.

[@joseluisrenteriaaragon4618]

@@IDX3Tutorials ok yeah i did everything step by step on this video, and when i launched the CFW emuMMC i got Error While loading fss0: atmosphere/package3 wrong ini cfg or missing/corrupt files! Failed to launch HOS

[@TrayGaming_Reactions]

Should I wait before updating my modded switch? I'm still on the last version before this update

[@IDX3Tutorials]

If you are already jailbroken, there will be a tutorial on the channel in a few hours.

[@juesebelmont7324]

@@IDX3Tutorials I guess I'll wait for that one!

[@Jxst_Otann]

when i run tegrarcm it doesn't let me clic on inject payload even if rcm is ok

[@IDX3Tutorials]

Have you checked if your switch is unpatched on the site below?

[@Jxst_Otann]

@@IDX3Tutorials yeah i did and it said that it wasn't ,the cable is good and the rcm is in what should i do?

[@IDX3Tutorials]

atlas44.s3-us-west-2.amazonaws.com/web-fusee-launcher/index.html try this site instead of TegraRCM

[@Jxst_Otann]

@@IDX3Tutorials i went to the site, connected my switch, but i didn't know which files to upload, can you help me? btw do you have discord so i can send you screenshots?

[@IDX3Tutorials]

@Jxst_Otann kzbin.info/www/bejne/jJrRdWVnd8xooLcsi=UXep-4SZruDBH6Zu skip to 07:47

[@rekyutotsu5744]

After i created the emuMMC it still was disabled. And when i tried to create it again i got an error

[@IDX3Tutorials]

What error? Did you read the pinned comment?

[@cgmtcgmt]

Thank you

[@IDX3Tutorials]

You're welcome!

[@Juk3n]

Bro i was running atmosphere and someone accidentally updated to 18.1 now atmosphere wont load. Will the steps in your vid solve my issue?

[@IDX3Tutorials]

kzbin.info/www/bejne/fGKne3yZbaisqcU follow this guide

[@sgunter7287]

Hi. Thanks for your video. I followed everything step by step, and everything seemed to work fine. I stepped away for a moment, turned on the switch, and everything seems to be gone. All I see in my album section are only screenshots. Please help.

[@IDX3Tutorials]

You need to inject the payload every time it shuts down completely.

[@sgunter7287]

@IDX3Tutorials, thanks for your quick responses.

[@kamahele_]

Will this work for a switch that is already banned from online service?

[@IDX3Tutorials]

Yes. In that case, you don't have to waste space on emummc. Just put the files and launch cfw-sysmmc.

[@jamesthenostalgiagamer1637]

The injector tool crashes when I go to inject it by the way my switch is able to be hacked

[@IDX3Tutorials]

Try some web payload injector.

[@itstheadhdforme1449]

i tried the 90dns setter and did everything, and then tried the 90dns testing utility but everything says unresolved, can you help me?

[@IDX3Tutorials]

Make sure you are connected to the Internet before running the tester. Also try restarting your home internet.

[@Reaktron88]

Can you open the normal album when this is installed?

[@IDX3Tutorials]

Yes, but you have to hold the R or L button. I don't remember exactly.

[@heyya7723]

Hi, i have a Switch with a Modchip does this affect how the setup will be?

[@IDX3Tutorials]

It's the same, the only difference is that you don't have to use tegra rcm because your payload.bin is automatically injected when you turn it on. But if your switch is already modded, then follow this tutorial kzbin.info/www/bejne/fGKne3yZbaisqcU

[@carlostejeda4341]

If I had games on the sd card already, after all the setup is done, can I just move the nintendo folder back to the sd to get my games back or what? Because I'm not in the mood to redownload 215gb of games Also, if I have the card in Fat 32 already with my games in, can I just put the hack files in the card without formatting or I need the card clean?

[@IDX3Tutorials]

If your switch is already jailbroken, on my channel you have a tutorial on how to update a jailbroken switch. That's the only way you won't lose data.

[@carlostejeda4341]

@@IDX3Tutorials no that's not what I meant, I mean if I'm going to do the jailbreaking process in my unpatched switch with my already formated FAT32 512gb SD card with the "Nintendo" folder with all my games, saves and screenshots, do I still need to format the card or I can keep the Nintendo folder with all my legit games in there while doing the thing?

[@IDX3Tutorials]

If it's fat32, you don't have to format it again. You can just skip the guiformat.

[@carlostejeda4341]

@@IDX3Tutorials thx for the info, I thought I have to do it with an empty card only, but I saw in other video that as long as the card is FAT 32, have enough free space and the jailbreak files are placed in the correct place, there should be no problem having the normal switch SD contents.

[@iris2121]

I have a 64gb SD card in my switch, do i have to delete everything on it before modding? Im very new to this so I might need a little more help so i dont break my switch.

[@IDX3Tutorials]

Yes, you have to format sd card before the process.

[@atomicatom2284]

Hello, I currently own a switch that is unknown whether it is or not patched. Would you happen to know a definite way of knowing if it is or not?

[@IDX3Tutorials]

Try it. If you see the hekate screen after injecting the payload, then you are lucky. On the website it says possibly patched?

[@atomicatom2284]

@@IDX3Tutorialsyea so I wouldn’t really know

[@Gius3ppez]

what's the name of the game that you are playing in the intro?

[@IDX3Tutorials]

kzbin.info/www/bejne/eXKooGeMnK6Hp6M