How to Launch a Motorcycle Well? Explained.

[@NoName-xx3yh]

Great job. You teach better than my college lecturers.😁

[@adarshms3591]

Hehe malayalii

[@narayananprabhakaran116]

Malayali

[@Shoukath_Ali]

FanS ZonE Malayali Daa😂

[@albincraju3913]

FanS ZonE hehe awesome profile dude. 😂

[@NoName-xx3yh]

ഇതൊക്കെ എന്ത്!...😀

[@janedhiraj]

One more thing Vikas, lean forward while launching. This will minimise popping of front wheel. And you can give a bit extra throttle.

[@motockrista8274]

Very nice explanation. You can tell he is a good speaker as the whole explanation didn't take cuts. He just kept speaking and speaking which is nice. Thanks for the tips!

[@nealaddams8235]

Mikes on Bikes explains proper launch control. How do you launch yourself on a bike??? MotoJitsu also does a great job. Vikas’s showing should be the first before watching Mike or motojitsu

[@levkranchevko1432]

Agree man

[@jahedahmed6516]

I really understood the touché. I have a r125 and I realised my maximum is 8k rpm not 9. Thanks a lot for explaining it very clearly.

[@mohaktyagi2353]

everytime a worthy knowledge comes from you..... great job !

[@khullaasaand]

I learned so much from watching your videos that I wouldn't have otherwise in real life as people around me are just too rowdy to go into details of motorcycling. Dhanyavaad Vikas ji!!!

[@realsteelgarage3050]

RIP CLUTCH PLATES

[@billyjohns2113]

A & A GARAGE Lol smartass

[@priyesh2688]

True but this is for people who race on track

[@realsteelgarage3050]

Priyesh Kumar yes broo

[@nobodysangel5568]

Clutch plates are cheap, let's say ₹4000 for a pair after 20k kms if ridden hard.

[@realsteelgarage3050]

Nobody Angel 4000rs will be cheap for you not for everyone

[@abadnongrum6716]

Vikas bhai can you please tell me if the masseters are a good option for a yamaha r15

[@mervinjoseph1631]

Vikas brother can you make a video on rev matching ..... that is it good to rev match while down shifting .. And is it safe on small cc bike like 150 cc bikes .

[@rahulsonar1998]

kzbin.info/www/bejne/jGWTZHyhip5mhdU WATCH THIS!

[@souravraychaudhuri6600]

For revv matching, you need to know how your motorcycle behaves at different rpm's and different gears. So, just practice. Blip the throttle while downshifting, and you'll soon get a hang of it. Ride Safe!

[@protech1]

Won't that burn the clutch ? If kept at friction point and increasing rpm

[@prantikdas9887]

I cannot match the throttle and clutch together so I keep it in 5000 rpm and slowly remove the clutch for normal rides is that ok

[@Indersingh-bt7ty]

Bt wont this damage the clutch???

[@sarcasticbazaar9639]

Won't it harm the clutch plates? BTW I have ns200 and doesn't get a slipper clutch

[@MrUbercool007]

very well explained...i dint know there would be so much behind launching a motorcycle.....looks like it will take some practice to do it properly

[@uzebahmed1059]

Kya aisa karne se clutch plates burn nahi hoge? Does it burns the clutch plates or not if we do so?

[@altafali9965]

Hello sir My KTM rc 390 2015 K engine oil burn ho rai hai Kya kharab ho gaya hai

[@asharrfz4549]

@vikas after sometimes can we skip the front brake thing

[@gggeorge]

does it burn clutch??

[@subhasissantra6154]

This is the real world tips, thanks Vikas vai

[@ameervlogs1672]

Got a very good direction on how to launch a motorcycle I was wondering on how could I launch a motorcycle without being a stupid infront of others. Shukriya bhai seekhane ke liye. 😊

[@njnzidhu9249]

can i use the rear break instead of the front break?

[@nikhilreddypindi3597]

Very useful video. Thank you @vikasrachamalla

[@vivianquadras8760]

But that will burn up the clutch plate much right?

[@vijayakumarb9530]

Hi, I'm an bike enthusiast and I'm residing at Bangalore.I Hope you have noticed in metro cities that the bikes are parked mostly on streets which is not so safe. May be due to space constraints and more other factors people are forced park bikes outside their premises. May be this could be the reason people are not ready to buy premium bikes even if they could afford one. It would be good if you do a video on "how to protect our bike from theft" or "Better ways to park in metro" Even if people are aware about this, you vlog may give confident to people to buy a bike and sleep peacefully. Please do the needful !! Regards Vj.b

[@Abhay0970]

THNXX BHAI FOR TELLING US ... CAN U MAKE A VIDEO ON controlling throttle .. *how to twist throttle* .. when we have to increase speed , some off my frnd , they just twist the full throttle immediately .. to gain the speed ... but bike doesn't response fast

[@trashtechtv4915]

Duker Boy slowly roll the troddle. Vikas already made a video on how to have smooth and fast troddle control

[@tanmayp1692]

Well even if u pull the full thing u waste fuel to my knowledge do it gradually the bike will speed up according to it's capacity of it's bhp and torque just full throttle dosent burn the fuel completely and causes problem in the engine if not on appropiate speeds

[@Abhay0970]

Tech Prady okkk thnxx u bhai

[@Abhay0970]

Tanmay P bro i have duke 250 😂😂😂 average doesn't mattr 😂😂 well thnxx u

[@tanmayp1692]

Duker Boy not for avg man it just waste as the fuel does nothing just burns without use that's all it's just like u using clutch on the stop light instead of turning off the bike u are going no where faster but burning fuel instead of enjoying another couple of miles

[@Antichrist6_6_6]

does it work with a 125cc

[@Lolyou.]

whats maximum rpm limit for dominar ?

[@anamitradey2625]

Very informative, you have got a new fan bro... 🤟🏻😁

[@Swanand97]

If I follow this process.. Will I burn my clutch plate? Because you told to keep the rpm at or under 3000 rpm, in your previous video!

[@himanshuthakur4481]

If our bike has quick shifter then also we have to push the clutch

[@lost_voyager]

Very userul and detailed video. Thanks Vikas Sir

[@noufaltariq]

Anyways the clutch will take a huge hit in life right ?? Even if you don't dump it

[@krishnaprasath]

ur a real motorcycling professional.....

[@sukhrajhundal9415]

Sir plz tell me that is changing the sprockets in rc is safe for engine?

[@jianliu9420]

How to improve this is to use your rear brake instead. The front will not rise during launch giving you a much more stable start. Also because you are not using front brake now it is also easier to control your throttle hand.

[@Villagefoodiesfriends]

Sir I'm little confused I'm willing to buy a sport bike Yamaha r15v3 or pulsar rs200 which should I buy my hight is 5.10 I'm waiting for your suggestion sir...

[@yusuf441000]

Is higher cc bikes have launch control system ?

[@ilungriame618]

Your explanation is really good!! You explain very clearly it's really good to watch your video

[@ashutoshsingh400]

Sir what about super bike like ktm super dukes they just do wheelies as the acceleration is given because they are hard to control

[@vivekkhandelwal7917]

Sir need your help I want to buy a bike and i have two options Duke 390 And Apache RR310 which one should I buy? Plz Reply........

[@sailendraandra]

I’m going to practice this until i master it thankyou bro😍😍

[@abhipramanik9143]

Thank u Sir....for give us such good leassons.....and Sir ur leasoons always helps me...

[@levkranchevko1432]

Hello beginner here! So if its okay to make the clutch slips? I mean.. this trick is for race right? Or there's a way to launch without have to worry the clutch slips so much?

[@nadeemqureshi9779]

Superb! Thanks for sharing.

[@amartya2727]

Bro , suggest me for Gixxer launch

[@akashb.maheswaran689]

Please make a video for how to ride a newly bought motorcycle, at how much rpm to ride and speed limit. I have bought a new 2018 modle suke 390 i want to know about how much rpm and speed limit to rude my duke 390 befor 1st service. I want ur valuable advise and suggestions

[@udaysantosh2218]

Anna what haopens if acceleration is given more ir less than 7000rpm

[@billyjohns2113]

santosh ktm It will pop wheelies

[@ashaneliyanage8304]

Good work Vikas, I'm from Srilanka and I'm watching your every video, qnd I gotta say you're nailing the work man absolutely awesome. Upload more and more points about riding a motorcycle, specially about taking corners, counter steering, sitting position (butt out turning). Keep up the good work.

[@rvkvikas]

Thanks very much my friend.

[@trippanmichael649]

Tanks bai... i am from kerala.. and i am your youtube student

[@ADITHYA388]

Bro doesn't tht burn clutch

[@ranjankumarnayak263]

Lovely video!!! Waiting for more videos like this.....

[@prakashk4232]

Sir why benelli 300 sounds like in line 4....but r3 and ninja 300 not sounds like that

[@shivbrown9413]

prakash k cause it sucks

[@khullaasaand]

Lol italian🤣🤣🤣

[@prakashk4232]

Lalith Kiran is there any different concept in engine design bro

[@zhack3d]

prakash k Ninja and R3 have parallel twin engines whereas benelli 300 have an inline 2 which is very similar to an inline 4!

[@prakashk4232]

Kailash Rava I asked why they sounds like that

[@mohnishanjaria9384]

awesome video sir

[@mechanicalnationjaipal5999]

Great video 👌👌👌👌👌💥💥💥💥

[@souravmazumdar1688]

such a great info. :) thumbs up

[@MarwanNizamuddin]

Isn't it good to pop up the front wheel slightly and gradually after 4k RPM so that you have less friction with the road giving a faster launch?

[@billyjohns2113]

Marwan Nizamuddin NOPE

[@uttamreddy7640]

Bro tell us how to reduce speed while riding when we see a sped breaker...all I meant is how to shift the clutch when there is a speed bump ahead

[@AoSFreaKz]

google downshifting with rev match

[@sherrysharad]

Question : Most modern superbikes come with Wheelie Control. Does that help in better launch? Also does it require lesser skills to launch a bike with wheelie control on?

[@devanand6753]

Great work sir,, thank you for giving this valuable knowledge...

[@maheshnagaraj9262]

Hello Vikas I own the 2017 Duke 390 and whenever I shift the gear up in low rpm the gear feels hard and when I shift down in high rpm it feels hard again. In city I cannot always change the gears at higher rpms so it feels quiet hard. At first I didn't mind it but now it's getting irritating. Do u know any solution to my problem. Thank you in advance

[@MrSksingh02]

A great video again... One more request Vikash... Since we see that TVS is about to launch a belt driven motorcycle "Zappelin", why don't you make a comparison video of chain, belt and shaft driven motorcycles...

[@sanketdabade]

Superb explanation and technique! Kudos!

[@Sreelinkinboy]

Your video about torque and bhp helps us alot.But still im confused then what does the CC do?Can u make a video explaining and relating all three?(Torque,bhp and CC)

[@peternduati9989]

Wao good video this is what I wanted to know

[@anshkhanuja3693]

I really love your videos bro Plz plz plz keep uploading 🤩🤩🤩

[@anandushaji1502]

Awesome bro..

[@kavinsp]

I can't thank you enough for this really informative video.... Please let me know one more thing... On motorcycles in which we don't know about the peak torque rpm how to find it out?

[@prabhat7713]

Nicely explained👍

[@abelbabel8484]

You can also hold back the bike with your foot to feel where the spot on the clutch is instead of using the front brake.

[@thatgeminiankid]

Very informative sir !

[@yuvan99]

Bro.. what is the maximum torque or rpm to launch 200cc bikes? @Vikas Rachamalla

[@adhigyasubba8744]

Awesome bro 👍 love from Darjeeling

[@chandrakanthotti7804]

Thank you for this useful info..

[@kishores9850]

When i am riding downhill(down wards) and want to go in min speed at that position holding CLUTCH is good or should i leave my clutch.(At this position i dont want to use acceleration and my bike wants to flow by itself) PLZ SUGGEST ME THE CLUTCH POSITION MUST BE AT THIS POINT.

[@khullaasaand]

No... You should pull the clutch only when shifting gear to lower speed. If you use keep pulling the clutch, it will disengage the bike from braking mechanism

[@khullaasaand]

Use front brake... lower the speed.... use clutch and downshift while slightly letting go of brake.... let go of clutch and use front brake.... do so till you reach the speed at which you want to ride in... keep throttle steading while applying front brake occasionally when the bike starts to gain speed

[@realsteelgarage3050]

No bro holding the clutch will disengage the engine from the wheels so the engine braking will not effect to slow down the motorcycle in downhill

[@realsteelgarage3050]

kishore s bro if want really smooth rides then shift to neutral and use brakes to slow down the motorcycle and u will save your clutch also

[@realsteelgarage3050]

Sushanth PS what do you mean broo

[@jaf_007]

very informative buddy...

[@asher7657]

But 390 is also powerful man...🔥

[@vikkyy472]

Was waiting for Lauch video..I knew someone would make it some day! At that is you😋

[@aimarmar4438]

Damnn that was a fast launch for 400cc bike, but it does damage to the clutch plate right??

[@rvkvikas]

Yes, to some level the clutch plates take a beating. Thanks for watching. Hope you enjoy my other videos too and hope you subscribe.

[@manaspatil5442]

Make a video on ecu remapping and power commanders

[@prasulpradeep]

When to change subsequent gears, at which RPM

[@netfun3853]

Vikas you are the best 👌

[@ratuldas8230]

Thank you so much sir....... All confusion gone.......

[@tanmaysharma1364]

No one : Absolutely No one in the universe : Vikas in his videos : *Buddies!!*

[@vishalknair2925]

Sir, i have a doubt! Is it comfortable to pull front brake and accelerate at the same time? Can this trick be applied to all normal purpose bikes too?

[@vinod_karumuri]

how to find clutch plate has worn out please make a video and please do comment on this as to know you have read this

[@justa5885]

Sir ji tussi great ho 😍😍

[@yogeshyogi1162]

Nice information

[@amalgp6543]

Bro!!! Half clutch or full clutch ? Which one is better?

[@bmohammedasif6575]

Bro how to do a wheeli in a sport bike and please add some videos on street race with ur KTM RC 3000

[@ashutoshsingh400]

Back with a new look💗😍

[@Mk0440]

Bro is ns 200 good for buying as an 1st bike?

[@tanmayp1692]

MR.Mukesh katwal I use the old one it was just fine at lower torque and mid-range face it it's 200cc

[@tanmayp1692]

Just out of curiosity what price point is it at where u live

[@rajatkhanna3134]

An informative one!

[@gtaslayer]

Do accelerating throttle is good ??? In neutral ....

[@King88_8]

Start with both feet on ground. Better balance for beginners

[@prudhvidatla3625]

Thanks to show us a good launch

[@vikramrsingh6041]

Bro nice and useful video. Can u make how to rev match video bro.I have been asking for many times.

[@piragashthevaraja9014]

You are awesome bro. Fan from sri lanka

[@giorgigiorgitko248]

you knwo whats gonna happend if i lunch my cbr1krr at 7rpm,a full back flip

[@ravisbhardwaj516]

Hello vikas ji.. Your all videos are jst awsome.. I need one help from you.. Can you suggest me two bikes for touring purpose between Dominar 400 and thunderbird 500x.. Thank you