How to lay down an underfloor heating mat How to install Prowarm under wood mat

[@syymonk]

Fantastic video. Just about to install this product and this is 10X better than the manufacturer's instructions. Thanks.

[@erumrauf]

Thanks for sharing the video. I have one question, my kitchen floor does havr electrical floor heating but i am not sure how it has been laid out. Also it's wires are not connected to the regulator? I can see a wire coming out from the regulator but it's not connected to the wire sheet. Is it possible to connect tha

[@tomcrabtree5119]

Great video and descriptions. More helpful than the prowarm video on their website. Thank you very much 👍

[@DrKnee23]

Is it recommended to use extra underlay under the underfloor heating mat if i am using luxury vinyl planks with built-in underlay which is only 1mm thick? Thanks

[@ZenMotoMCR]

Hi I have a question. I have a 16 amp MCB supplying a downflow heater in the bathroom at 2kw which is around maybe 5 metres away from the consumer unit. Which is then connected to fcu presumably with a 13 amp fuse in it. What I would like to do is split that and put that leg in a junction box bring two feeds off it one for a 1kw radiator and 1 for underfloor heating of around 350w - 500w max would this be adequate if I use 2.5 mm twin & earth which is lower than the current 2kw downflow heater and they'd both have their separate fcu for the connection to the individual heaters

[@cunamatata990]

Thank you for sharing valuable information in such a clear way !

[@werdas5196]

did you say you put underlay straight on a carpet floor?

[@markattwell8280]

Cheers, I really like your videos. Nice and clear and appear to hit the DIY topics I'm involved with.

[@RedaStihi]

Hi, thank you so much for this video. I need to know how to install on vinyl, please.

[@jkb7903]

Can Ceramic or porcelain floor tiles heat up efficiently on top of this underfloor heating?

[@jmvpf]

yes. tiles is more efficient than laminate

[@ricomor7907]

Would it be better to use aluminum tape?

[@jayjohal6892]

Can the cold tail (power cord) be fitted in the insulation UNDERNEATH the heating mats??

[@johngrannan]

Cut a groove in the insulation mat similar to when installing the thermal sensor.

[@mirco7823]

Has anyone had issues with their floor (laminate or engineered wood floating floors) expanding or cracking with this type of underfloor heating?

[@tsw4437]

Hello I am in process of installing water underfloor heating. As part of the project the contractor is also moving the boiler from kichen to garage. My question is when the project completed what kind of certificate and documentation should I get for the underfloor heating installation and for moving the boiler for my future record. Can you please list out what should I get from the company on completion please. Thanks,

[@SandeepKumar-nq3nn]

I learned alot from this vdeo, Good job man. Thanks a lot

[@enricomariabarra3261]

Thanks for the video, that helped me a lot 👍🏽

[@leog6742]

Does this work for hardwood flooring specifically bamboo floor ?

[@michaelcostello6991]

Great explanation with practical demonstration. Thank you

[@giuseppemanzoli-chef]

Hi mate , this was amazing !! Thank you !!!!

[@jarekb-a7530]

Hi, enyone knows what are running costs of electric underfloor heating vs traditional gas boiler + radiators system?

[@stuartmathie3872]

Great videos and you go explain well, can you make a basic video on sharpening wood chisels with an oil stone?

[@Dzinglazz]

Thanks for the video! I am interested if the 140w system like this is sufficient enough to heat up the room in the colder months as the main heating source? Would you be able to share your experiences? How long does it take to warm up? Thanks!

[@SS-zb4ng]

Yes. It would work perfectly. I am using similar from last 6 years and works nicely

[@emporiumeliteshop]

@@SS-zb4ngis it more efficient to heat your room than your normal heating?

[@jondavidgriffin]

Best video on these mats

[@manjitmatharu4561]

Excellent video and well explained keep up your good work

[@pavko2557]

Great instructional video. Did you use any foil under profoam orange panels?

[@womblestacker7993]

Can you put tiles on top

[@adambrudnowski2822]

Hi there, fantastic wideo very helpful thanks for doing that!

[@michaelgorewoda6271]

A really clear & helpful video.

[@umt1cardiff]

could I just point out that one should not hold the live/ neutral probes with the fingers (3.20) as a false reading could be given

[@andrewmcgowan8440]

Tripe, the discrepancy meter reading would not be worth bothering about, the man did good, ohh that was a very sexy meter, Spark HND...

[@roybhana5133]

Really good video, helpful for me understand how to get job done

[@szakul2349]

Hi, nice video. But you mentioned nothing about the vapor barrier foil that protects against moisture. Do these boards already have such a moisture barrier?

[@piotrlyczba9247]

Hi,can you connect two maths together?

[@jayjohal6892]

Yes mate! You just have to connect the two flex cables into the thermostat!

[@zippymo672]

Nice video. As a trainee spark, I've just learnt something new. I love your accent too. Especially when you say 'neutral'. Its sounds like 'Neo-traal' 😂😂😂😂. Where are you from?

[@agnieszkalaskowska2683]

Można użyć podkład z folia pod matę grzewczą?

[@jayjohal6892]

You have not explained how you have to lay the flex cable into the floor so is not sticking out the floor ?

[@stevehurt1615]

I am going to have to put a thin layer of under laminate foam on top of my insulation because the type I bought is too HARD as its IMPORTANT that the mat/wire element can mould into the insulation to stop the wood/laminate bearing on the wire to much!

[@jayjohal6892]

Not needed mate! I’ve laid my heated mats on top of 6mm ply wood and is absolutely fine !

[@mango3586]

nice bit of information

[@how2d223]

thanks

[@Clydepatos2001]

Great video very good job

[@TheKiszka]

Po ile taka jedna mata?

[@Valerio78]

Great video, thanks

[@jmvpf]

pure alu tape is to make.bridge between mats laid parrallel

[@charles-vq6sd]

Nice vid👌

[@how2d223]

Thanks Charles