How to Make a Carbon Fiber Steering Wheel with Epoxy Resin [DIY]

#carbonfiber #steeringwheel #epoxyresin
How to Make a Carbon Fiber Steering Wheel with Epoxy Resin [DIY]
Making a Carbon Fiber Steering Wheel
카본 스티어링휠 만들기 with 에폭시 레진 [DIY]
카본 자동차 핸들 만들기 with 에폭시 레진 [DIY]

[@thealternativefactor6694]

Ordinary chaps like me working 17 hr a day to pay bills can now afford carbon fiber steering wheel. My friend, I salute you. It was always a dream of mine to do something like this and now you teach me. My wallet and my car salute you again.

[@ECOLAPStudio]

Hello, Buddy. Your praise pleases me so much. I will make a more wonderful and enjoyable video. Please look forward to it. Thank you for watching.

[@derekperezpaula9206]

Wth, no showcase of the actual steering wheel

[@jaysworkshop8870]

I know right.

[@MooDAuto]

I know right.

[@PeterLimDaehyun]

그 러니 까요.

[@Eliasam13]

I know!!! The entire purpose of the video, what a fail lol

[@riccello]

Didnt work out

[@jawaadzulqernine2146]

Please upload some videos where you introduce us to the methods and tools required to work with carbon fiber( for beginners who want to get into it). That would be very helpful.

[@casst346]

all that work and we couldnt even see the finish product!

[@e36fanatics]

because the finished product was ass... you could tell that the thickness was never gonna match when you put leather back on the steering wheel... he did do good job too bad he missed one crucial part of making it well

[@thepiggydiggy6294]

@@e36fanatics Super late question, but what would've you done in that situation for it to not look like that

[@MrFUNDIS]

@@thepiggydiggy6294 more layers of carbon fiber to level it up with alcantara

[@iface1704]

Don't know what is better. The way you made your steering wheel, or the kind of that clip!!! Anyway....both fantastic.

[@accordingtoabe2211]

ASMR + carbon fiber fabrication is something I never knew I needed until now. Thank you. Most of your videos are fairly recent so I hope your channel blows up and gets the popularity it deserves for such pleasant videos. Would you mind sharing the link to the blue hand pump you use in some of your projects? With the little white connector? Thank you

[@ECOLAPStudio]

Hello, Buddy! Thank you so much. The pumps and vacuum bags I use are for clothes and food. I make carbon fiber as one that is readily available. I think you can get it easily. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.

[@accordingtoabe2211]

@@ECOLAPStudio ah okay so clothing storage pumps. I recognized the food saver bags. Very clever. Your content is great and I wish you the best.

[@BrunoDeSoto]

WOW!!!!!! you have my greatest gratitude. You have inspired me to wrap the wing on my Porsche 991 turbo. You have saved me tens of thousands of dollars with your videos. Thank you very much.

[@uui4449]

재능을 진짜 구라안치고 심각하게 낭비하시는거같습니다 . 대한민국은 이런 인재를 뽑아가야지 뭐한답니까

[@stritboyz]

Who da f**k is hitting unlike on this diy. Enjoy the video, this guy is doing something he loves and sharing it with us. Hope you get more subscribers. 👍

[@ECOLAPStudio]

Hello, Buddy! Thank you so much. Thank you so much. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.

[@philb707]

Can you do a video showing how to flat bottom a steering wheel? Great work by the way!

[@BaliJalanJalan]

The end of video make me laugh lol.. its very funny

[@ECOLAPStudio]

Hello, Buddy! Thank you for watching. I will make more funny and informational video. Thank you!!

[@YellowDieselGolf]

Shrink wrap is a genius idea. I’ve tried to do this with adhesive, but the shrink wrap will give a much better result. 👍🏻

[@khangpham6027]

YellowDieselGolf did he peel the shrink wrap off or sanded it off

[@QPRFC1968]

Great work ,just wished you showed more on how the m sticking was done

[@jesseambachtsheer1138]

First steering Wheel vid on youtube and you killed it! Love it man. Cant wait to see more

[@ECOLAPStudio]

Hello, Buddy! Thanks for the compliment. I will try to make more enjoyable and informative videos. Thank you for watching. Please look forward to the next video!

[@NigelPurvis]

Hi! Found your channel looking for BMW M4 content and carbon! 😆 Seat backs have been done, but ive always wanted a carbon version of the seat fold-forwards handle and trim around it.... For a future vid? 🤓

[@romandise]

1:03 that was funny haha

[@SecretSauceyjuice]

As an instructional video, pretty good. For entertainment, a little disappointing since we basically didn't get a final product shot...the last 3 cuts were super fast and none showed the whole finished wheel. Watch How It's Made. They are the masters of this type of editing.

[@jessejohnson159]

! 감사합니다! (제 아내는 한국인입니다) You were able to get me past 'over thinking' putting Carbon Fiber on a custom wheel I am fabricating!

[@reborn9110]

100% my new favourite channel

[@LVCMTB]

Amazing video 👌🏼

[@TheCdM1981]

I love that who ever makes these videos intentionally makes them ASMR videos. Awesome. lol

[@kirillgreek8653]

Top stuff man. Especially the final part. Love your sense of humor.

[@2AntsBro]

Innnn...INNNNN...INNNN (Bmw sounds)... weooo...weoOO... WEOOO (police sounds) 🤣🤣🤣 well tech, pro skill, fact, and a lot fun :) thnk you bro.

[@teoyota]

Great video. I was wondering how to wrap the parts with carbon and make it have a nice touching point when both ends touch. Did you simply overlap them and then sand the extra? How do you keep the carbon from distorting its weave, biggest help is the gel? After you remove the heatshrink and start sanding isn't there exposed carbon that you damage since there isn't much resin? Thank you.

[@ECOLAPStudio]

Hello, buddy!! Thanks for the comment. I think your questions are very important and good. First, as you say, I think the important thing in carbon fiber overlap cutting is to keep carbon fiber patterns. I used spray adhesives to solve the problem. Using a spray adhesives can keep the carbon fiber patterns. But, You have to use minimum amount because if you use too much spray adhesives, surface is not clean. Other methods include applying epoxy resins and then cut after half cured. But I think it is a hassle way. And then in the first sanding,It exactly damaged to the carbon fiber cloth. However, if you minimize the damage and then apply epoxy resin, the damage is indistinguishable from the eyes. Sanding to the extent that carbon fiber patterns are not damaged is be okay. The important thing is keeping the pattern of carbon fiber. I am worried you will can't understand my meaning because I am not good at English. I hope you helpful. If you have more question, please reply. Thank you for watching.

[@teoyota]

@@ECOLAPStudio can you actually use poly gel coat, not epoxy?

[@ECOLAPStudio]

I used epoxy gelcoat and epoxy resin. I've used polyester resins, but It is not as strong as epoxy resins. So most of the work uses epoxy.

[@ionutsirbu9743]

@@ECOLAPStudio man can u give me the link where can I buy the shrink tape?

[@wanglee21]

I thought you were going to make the cast molding of the entire thing back and front and then piece it together.

[@slavsalvage1071]

Can you post where you buy your material s

[@pku0412]

다시봐도 박수가 나옵니다.👏👏👏 수강료 받으시고 수강생모집 해볼생각 없으세요?ㅎ

[@ECOLAPStudio]

감사합니다~~^^ 아직 돈을 받고 누군가를 가르칠 실력은 아닌 거 같습니다ㅠ 물론 기회가 된다면 무료 강습 같은 것도 생각하고는 있지만... 본업이 따로 있는지라 시간을 내기가 쉽지가 않습니다ㅠ

[@Frank_tha_tank1]

Great vid I just wish u slowed it down when applying the carbon fiber since it’s a weird shape. I hope you will do a e brake handle soon

[@ECOLAPStudio]

Hello, Buddy! Thanks for the comments. I will try to review and apply your comments. Thanks for watching.

[@aniketgoundge]

I watch this video without background music and i loved that

[@santoshchilka6270]

Great job , can we get these epoxy resins and other materials here in India . Anyone commenting from India please help

[@albertolariosmarque]

Please do another steering tutorial. We know maybe the end product wasn’t like you thought it would turn out. How about doing a redemption? We would all like to learn how to make these

[@alfonsshuli9128]

Sei il numero 1..!! Grande Continua a fare video soprattutto sui pezzi delle auto

[@ECOLAPStudio]

Hello, Buddy! Thank you so much. I will make fun and informative videos. Please look forward to the next video. Thank yoi for watching.^^

[@MrLosromanos]

Красавчик , всё зашло, палец вверх и подпись. Можешь снять отдельный ролик с рассказом какие компоненты используешь, какой отвердитель, смола и т д ( какой лучше производитель ) ?

[@thealternativefactor6694]

LOL. Working on my third attempt. Wrapping the wheel with the carbon fiber is the most difficult part. I will try again tonight...

[@ECOLAPStudio]

Third ... T.T Yes, it is very difficult to attach carbon fiber to the steering wheel. This is because the length of the steering wheel arc is different from top and bottom. You have to remember it. and It is important to cut the carbon fiber cloth. I hope your work will be well.

[@archeebookingagent1909]

would you be able to share with me where you buy your supplies.. like liners, CF cloths, backs and the little pump... this is so inspirational...

[@ECOLAPStudio]

Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html I hope you helpful.

[@marius4668]

Hello Is it mandatory the first layer of gel coat ? I don t find only on high quantity.

[@SuperArchi2010]

Hi There Thank you for the video techniques with carbon fibre I have a questuon Hiw would you approach a conical shape 40cm diameter 30cm height Maybe one sheet to cover it all ar once or in pieces or any other way Much apprieciate your help Best

[@OgnjenKljajic42]

Hello, can carbon cloth be glued to the wheel with epoxy resin?

[@jrcmr03]

Can you provide a link to a supply list or starter materials needed, I would like to start making small items. Thanks for all your hard work and dedication!

[@ECOLAPStudio]

Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html I hope you helpful.

[@jrcmr03]

@@ECOLAPStudio kamsahamnida! For the quick reply I'll take a look at the items would you also be able to recommend a usa source?

[@MrClunk999]

so you just wedge the fabric into the cuts out you made?

[@razy7609]

This isn’t real carbon fiber correct? It’s just a wrap?

[@cartuning9616]

안녕하세요 핸들 카본 작업할때 에폭시 재료들은 어디서 구입을 할수있는가요? 답변 기다리겠습니다

[@ECOLAPStudio]

안녕하세요. 저는 보통 화이바맨이라는 온라인 쇼핑몰에서 재료들을 구매하고 있습니다. 검색해보시면 쉽게 찾으실 수 있으실 겁니다. ^^

[@DMVEuros]

Is it possible to do the whole steering wheel with carbon fiber without having the separation for the cloth

[@ECOLAPStudio]

Hello, Buddy! It is also possible. However, the original steering wheel leather will be damaged.

[@DMVEuros]

@@ECOLAPStudio So i have a mk4 jetta steering wheel I was going to try to remove the leather and wrap the entire steering wheel so I should no longer need the leather

[@ddjslhomebase243]

New found respect for CF. Wow.

[@mrglobul12]

So cool to see the production process! Is forged carbon applied the same way? Just bought a custom wheel from Taw Customs for my Audi. Really excited. Great job again!

[@ECOLAPStudio]

Hello, Buddy! Forged carbon fibers aren't too different either. In order to make forged carbon fiber, compression is required. Shrink film plays a role. I hope your work goes well. Thank you for watching.

[@Haggishunter86]

Amazing work 👏really enjoying your work. Would love to see some BMW Kidney Grill surrounds done in carbon :)

[@matthewttful]

You need to create steering wheel wrap ASMR videos!!

[@raudelmartinez1534]

Has un video de como hacer un casco de soldar 💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀

[@alexandrupopa9443]

Could you make a tutorial on how to make the steering wheel flat on bot ? 🤔

[@xloboxx]

¿Por que le pones gel coat epoxi al principio y no directamente resina epoxi? . Tengo otra duda. La cinta termo retráctil.. parece que ha dejado marca, ¿no?. ¿crees que habria sido mejor no ponerla?. ¿ o haber reforzado con mas cinta encima de la que ya pusiste? . Un saludo. Eres un maquina!

[@ECOLAPStudio]

Hello, Buddy! The use of gel coat is to layer carbon fiber cloth on steering wheel. Epoxy resins flow down because It is low viscosity, but gelcoat does not flow down because it is high viscosity. And also, Gelcoats can be used to bond carbon fiber cloth very tightly. Shrink film was used once. Shrink film marks remain slightly but are not visible when sanding and epoxy resin is applied. If you have any questions, please comment. Thank you for watching ~ ^^

[@xloboxx]

Muchas gracias por contestar. Voy a fabricar mi propio volante y este video me va a ser muy util. Este y el resto de videos. Ademas que lo haces entretenido de ver y te ganaste un suscriptor ;). Sobre el gel coat negro que usas al principio.. ¿podria sustituirse por el que aplicas como capa final, el uv? . Yo voy a usar resina epoxi uv y gel coat uv, todo transparente. Saludos y gracias otra vez.

[@ECOLAPStudio]

UV resin can be used as a top coat. The final topcoat has the inverse of protecting the surface. It can be coated. Gel coat is recommended black. The black gel coat can cover the base color of the parts.

[@xloboxx]

Gracias. El tema es que no encuentro gel coat epoxi negro. Por eso decia de usar el gel coat transparente uv como base y como final tambien. ¿Donde puedo conseguirlo?. Si no lo hare con el transparente. Solo encuentro verde. Saludos!

[@ECOLAPStudio]

Check out the black gel coat. www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html

[@dirtyboxer4651]

I watched all that and you didnt show the final product properly

[@ECOLAPStudio]

Hello, Buddy! I'm sorry it was a mistake in editing. I checked it after uploading the video. Since then, I've been paying much attention to showing the results. Please look forward to the next video. Thanks for watching.

[@dirtyboxer4651]

@@ECOLAPStudio ok bud will do👍

[@dalizgameplay8576]

wtf all the tools are there, very complete and many are not sold freely. where do you buy all those tools

[@РустемГайнанов-н2д]

Good job!!! Thanks for your video!!!

[@bluspirit81]

Hi guy is the 220 not too hard? there is only one coat of resin, how can you not ruin the Carbon? when I use the 400 I immediately get to the fiber and ruin it

[@ECOLAPStudio]

Hello, Buddy! I didn't sand too hard the first time I sanded. You must sand the carbon fiber cloth to avoid damaging the pattern. For the second sanding, apply several layers of epoxy resin and sanding. At this time, It can sand to a lot of epoxy resin and shape the steering wheel. Even the sand paper of the P220 can be adjusted according to the strength of the force. And the scratches on the P220 sandpaper will all disappear after applying epoxy resin. You should not shape done when first sand. The second sand is very important. I hope you helpful.

[@ramonluevano20]

Love it ! I wish you can put everything you used in the description

[@gregs7753]

Ramon Luevano same. Trying to google all the items and ratios

[@mickaeldubreuil699]

Could you please give us the link where you buy the resin and the carbon panel? Thank you! Really good video man, love it 😍

[@ECOLAPStudio]

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/

[@simone8477]

Gran bei lavori, bravo! Ci lasci magari in descrizione un link dove prendere i materiali? Dalla fibra alle resine? Grazie

[@simongoode7812]

Love it... Makes me want to get mine done!! 😍

[@ZillaFullBoost]

Subbed! Definitely doing this to my Q50 Red Sport and 135i. I’ll upload the video to my channel when I do :)

[@SergioSanchez-xp2zs]

Gracias! Acuerdate que con este video tr harás famoso

[@ECOLAPStudio]

+Sergio Sánchez Thank you so much!! I hope you enjoy this video~

[@Gringo74.]

Woooow congratulations, excellent job 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 regards brother 🍷

[@garthbanton4236]

If I was trying to retain the heated element for the sides, how would I do so?

[@mikemike9881]

How much do you charge to make custom steering wheels

[@FullNelsonYT]

I see that you always shrink wrap or vacuum seal the carbon fiber. Why is this? Is it required?

[@ECOLAPStudio]

Hello, Buddy! The purpose of the shrink film is to securely attach the carbon fiber to the steering wheel. But it can be made without it. Thank you for watching.

[@FullNelsonYT]

@@ECOLAPStudio I see. Makes sense now! Thanks for replying!

[@Ady13031997]

Salut , dacă nu am rășină epoxidica cu protecție UV este vre o problema ?

[@krlichos]

The ending is FU**ING EPIC!

[@delvistejeda3193]

Loved the video. I would prefer using the old leather.

[@ECOLAPStudio]

Hello, Buddy! I am planning a new steering wheel. The video probably uses old original leather. And it is probably a forged carbon fiber. Please look forward to the next video. Thank you for watching.

[@mcintosh.motors]

@@ECOLAPStudio Please do forged everything! :D

[@rodecars6285]

Por favor haz un video de cómo restaurar un volante o como ponerle alcántara desde cero y como hacerlo la anchura para los dedos pulgares

[@worldbeautifulreligionisla6467]

How many time you spend for making carbon fiber 😳

[@israelcastro2230]

excellent my friend i follow all your videos, excuse me, i have a question, when you put gel coat after carbon fiber do you wait until dry ? then you put resin epoxy, thank you very much best regards from Mexico

[@innate2]

plz make another one step by step

[@alliancecarbon8869]

Great idea! I plan on making a similar style video to this!

[@ThtGuyIzRippin]

thank you for posting this info online man. can you please tell us where you get the fabric for the side from ?

[@badmon1992]

Do you have a list of products used. And also where can you find empty steering wheels like you did on your video. I want to practice with a blank one vs using my own and messing it up. Also what did you do with the heated steering wheel option? Did you leave it connected?

[@ECOLAPStudio]

Hello, Buddy! I have two steering wheels. One is the stock handle and the other is the Alcantara steering wheel. So I worked with stock steering wheel. I think you can get a steering wheel for your car from eBay, etc. I did not connect the steering heating wire. It is very difficult to connect the steering heating wire. Perhaps you need to make a new heating wire. So I didn't. Thanks for watching.

[@badmon1992]

One more thing whats the measurements of mixtures that you use.

[@yamaharaptor1896]

Hi, I have a question. Some people use some white filler or product to reshape the top part of the steering wheel when they ad the LED Light display like F1 cars have. What is this product called???

[@ECOLAPStudio]

Hello, Buddy! The LED light is the engine RPM signal. It could set the shifting point to LED light. Some are sold in aftermarket, and others are sold as an option for automakers. If you can do MCU (ex. Arduino) programming, you can do it yourself. I had created and used something similar about 10 years ago.

[@yamaharaptor1896]

@@ECOLAPStudio Yes i know what the lights for but i want to know how they hold it into place and mould it into the steering, what Product is used??

[@vachonmathieu1185]

Super cool cette vidéo. J'aime beaucoup ton contenu. Pour ce qui est du carbon on peut en acheter ou ?

[@ECOLAPStudio]

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/

[@vachonmathieu1185]

@@ECOLAPStudio perfect, thanks! 👍

[@kamarulzamanahmad8846]

You're so amazing. Nice video....hope i also can do it myself

[@TOTHETOMBANDBACKGAMING]

Had to sub just because that was epic. 🤘🏾👍🏾👍🏾

[@bigbear1845]

확실히 필름이랑 느낌이 틀려요 썸네일 사진이 참 영롱하네요

[@TuningCustomUpgradeCarParts]

you are the boss

[@soto_e9276]

If you don't mind me asking what type of resin and weave do you use? please link? Thank you I subd! nice steering wheel have been watching your videos! Keep it up!

[@ECOLAPStudio]

Hello, Buddy!! I usually use a laminating epoxy resin. The top coat uses a different one. Generally, it can work with laminating epoxy resin. I bought an epoxy resin at a Korean online shop. But I think Korean online shop won't ship overseas. So let me tell you a website in the UK. Maybe you can find the things you want. I hope it will help you. Thank you for watching www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin

[@soto_e9276]

@@ECOLAPStudio Thanks dude!

[@dpconcept8553]

Great video 👍 It can be don same process with wood vinyl also?

[@Svndfx]

i need this Start button in Steel optic

[@brazibeatz5187]

I wanna learn how to do this

[@bluspirit81]

ciao bel lavoro ,uso il carbonio anche io ma solitamente come ultima mano do il trasparente per evitare imperfezioni.una info,cosa si può usare come riempitivo per aumentare il diametro della corona?perche una volta foderato la parte con il solo carbonio rimane molto più fine rispetto il resto del volante...

[@ECOLAPStudio]

Hello, Buddy! I'm sorry I can't speak Italian. Anyway, do you want to increase the diameter of the steering wheel? There are several ways to increase the diameter of the steering wheel. I think that using the filler is the simplest. The type of filler doesn't matter much. But it's good to choose something that is easy to sand. Sanding is very important after applying several layers of fillers. You have to make a shape with sanding. After that, you can apply a gelcoat and layer carbon fibers. I hope you helpful.

[@bluspirit81]

@@ECOLAPStudio sorry, I saw the description in English and I thought you were Italian. can I use resin paste as a filler? because the coated part remains much larger than the carbon one,so I would like to increase the carbon size

[@ECOLAPStudio]

@@bluspirit81 Resin is difficult to use as a filler. Because the resin is low in viscosity, it flows down. Also, after curing, it is very hard, so sanding is very hard. Making shapes with sanding is very hard. If you want to increase the diameter of the steering wheel, it is recommended to use a filler that is easy to sand. I hope you helpful.

[@bluspirit81]

@@ECOLAPStudio i don t mean liquid resin,but resin paste .I do not know how to say it in English. is not liquid ,but it can be modeled by hand and then hardens

[@ECOLAPStudio]

@@bluspirit81 We do not seem to understand each other because of language. I'm sorry T.T Liquid resins, such as epoxy resins is flow down and not easy to use. When you choose resins or fillers, simple materials should be used for modeling and sanding. Modeling is very important. Good modeling results in good carbon fiber skinning results.

[@albertogonzalez5830]

I want to modify the thumb grips, what material do you think I would need in order to get that squishy material that are used in stock steering wheels.

[@wakman2785]

Make rod fishing..

[@picjusrel]

Hi bud..I enjoyed watching it Can you share list of products you used exactly? Like slow cure of medium cure epoxy? Etc..looking to buy a whole setup necessary for this same process.. Thanks!

[@ECOLAPStudio]

Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html I hope you helpful.

[@bahadurseatcoverleatherste3302]

Material used details??

[@agenorfariass]

I want to do on mine but i can’t find this shrink tape in my country. :/

[@ECOLAPStudio]

Hello, Buddy! I hope you helpful. www.easycomposites.co.uk/#!/vacuum-equipment-and-supplies/vacuum-bagging-consumables/composites-shrink-tape.html

[@garthbanton4236]

Why did you use the putty

[@이찬형-c4h]

엔딩에 패트롤카 사이렌. 아주 최고의 효과음입니다..^_^ 영화감독이 넣어줘야할 엔딩 효과음 최고입니다..!!

[@jaysohn7544]

와 멋집니다 고생하셨어요

[@ECOLAPStudio]

감사합니다!! 더 재미나고 유익한 영상을 만들테니 기대해주세요!!

[@santiagocervantes1694]

What was the purpose of the shrink film? Hooked and almost watched all your vids

[@ECOLAPStudio]

Hello, Buddy! Shrink film helps keep carbon fiber attached on the steering wheel. It also releases unnecessary epoxy resins as they contract. I hope you helpful.

[@santiagocervantes1694]

ECO-LAP Studio so you didn’t remove after right you just sanded down?

[@ECOLAPStudio]

+Santiago Cervantes I removed the film before first sand. After remove the film, I sanded and applied epoxy resin.

[@santiagocervantes1694]

ECO-LAP Studio thanks buddy keep those videos coming!!!! 👌👌👌

[@gigiyora106]

hi, amazing work!! what was that tape that you put on the fiber and then heated? can you explain?

[@ECOLAPStudio]

Hello, Buddy! It's shrink film. It is reduced by heat. I hope you helpful.

[@gigiyora106]

@@ECOLAPStudio wow cool hack😃 but how to use on bigger surface? i dont have vaccoum:(

[@ldunmdx]

Ant UV top coat used?

[@danimeier4006]

Von wo haben sie die Alcantara Zeile links und rechts her?

[@garthbanton4236]

How would you retain factory heat

[@navjitsingh4585]

Is there any difference between epoxy gelcoat and hardner you applied as first layer and epoxy and hardner you applied afterwards other than difference in pigment colour?

[@Luthfi.esa.]

Carbon fiber roof for *BMW 3 SERIES TOURING* please