[How to make a circular saw crosscut jig] Flip-up type (perpendicular fine adjustment function)

Рет қаралды 376,557

Күн бұрын

Thank you for watching!
It's motto.
I made a circular saw slide stand (cross cut stand) that can easily cut a circular saw.
The slide part is flipped up so that it is easy to adjust the cutting position.
#how to use a circular saw #cross cut jig #diy #clrcular saw
▶︎ motto's koubou Channel dedicated to making furniture and sundries
/ @mottoskoubou
▶︎Other SNS
Instagram: / tsukuromotto
Pinterest: www.pinterest.jp/tsukuromotto
Twitter: / tsukuro_motto
[About Amazon Associates]
The DIY motto channel is a participant in the "Amazon Associates Program", an affiliate advertising program designed to provide a means of earning referral fees by advertising and linking to amazon.co.jp.
♪ BGM in the video is licensed from Artlist sound sources.
motto studio
motto

Пікірлер: 122

@user-tc6yb3nm3f 5 ай бұрын

素晴らしいノウハウを有難う御座います。お陰様で、ほぼ見本通りのクロスカット台が完成し喜んでおります。 7寸ゼットソーも大変重宝しており、ジグも複数制作させて頂きました。これからも凄技を楽しみにしております。

@user-sw3fz5gy4o 11 ай бұрын

数年前に初めてスライド台を作ってみました。納得できず自作定規で作業していましたが、この微調整機能スライド台は素敵ですね！固定式ではなく跳ね上げで確認しやすい点も良いです！連続で切りたいのと、1番多く使うサイズなので参考にさせていただきます。

@DIYmotto 11 ай бұрын

コメントありがとうございます！スライド台の不満って、皆さん同じかなと思います。解消版として製作しました。参考にして頂けると嬉しいです！

@nabehiro1972 Жыл бұрын

勉強になりました！！！はねあげ式で墨線が見やすい、直角微調整ガイド、その他諸々。丸ノコスライド台のモヤモヤをみごと解決! 自分もmottoさんの動画を見習って、丁寧にまねしてみます。ありがとうございました。

@DIYmotto Жыл бұрын

コメントありがとうございます！前作の改善版として製作しました。お役に立てたら嬉しいです！

@user-bp1gc9nk4r Жыл бұрын

このアイデアは秀逸脱帽です！材料を押さえる棒も、他の方は市販の金具ばかりなところ、自作してしまうのがもっさんのスゴいところですね！

@DIYmotto Жыл бұрын

コメントありがとうございます！当初はトラックレール式も考えましたが、鬼目ナットで十分対応出来ると判断しました。コスト的にも抑えられますね。今回はクランプのデザインにもこだわってみました。 2種類の長さで製作したので様々な固定に対応できるかなと思います。

@mtmtodd Жыл бұрын

as always, you did a great job.

@DIYmotto Жыл бұрын

Thank you for your comment! Thank you for your evaluation!

@arkan1960 7 ай бұрын

凄いですね

@DIYmotto 7 ай бұрын

コメントありがとうございます！

@mironvulakh5859 10 күн бұрын

Phenomenal craftsmanship and attention to detail. Bravo! You sir are an example for those who want to learn a craft.

@DIYmotto 8 күн бұрын

Thank you for your comment! I'm happy!

@bradleytuckwell4881 8 ай бұрын

Great jig super accurate and your work is beautiful so crisp and clean well worth a subscription I can see you have a lot of great ideas

@DIYmotto 8 ай бұрын

Thank you for your comment! I'm glad you appreciated it.

@user-wi3br9sy6z 8 ай бұрын

very neat job. I can only say one thing: when I made a similar device, the thickness of the boards along which the saw moves greatly reduces the depth of cut. I had to look for thinner ones.

@DIYmotto 8 ай бұрын

Thank you for your comment! It is true that balance is important when it comes to the thickness of the rail part. The square timber I use is about 40mm, so I use that thickness as my standard.

@sergiobaeza8860 7 ай бұрын

Justa what I was looking for. Thanks.

@DIYmotto 7 ай бұрын

Thank you for your comment! I'm happy to be of help!

@mutantthegreat7963 8 ай бұрын

Nice. I will definitely have a go at making one.

@DIYmotto 8 ай бұрын

Thank you for your comment!

@luissojo6885 8 күн бұрын

Demasiado bueno, bonito y perfecto ese trabajo

@DIYmotto 6 күн бұрын

¡Gracias por tu comentario! ¡Estoy feliz!

@user-dn8mz5po4n Ай бұрын

すみません😅再度前の動画を見直したらピッタリの動画がありました。ありがとうございます。チャンネル登録させていただきました😊

@DIYmotto Ай бұрын

コメントありがとうございます！可能であれば集塵タイプでソフトスタート、静音モード付きが良いと思います。ウッドデッキなどのカットで無ければ125mmの方がオススメですね。チョット高価ですが、長く使い続ける事を考えると1番お得かなと思います。日本メーカーであれば、さほど変わらないと思います。ご参考に。

@marinrezaie 2 ай бұрын

It was great. i like it.

@DIYmotto 2 ай бұрын

Thank you for your comment! I'm happy!

@patrickguyot1290 10 ай бұрын

Thats amazing! 😍

@DIYmotto 10 ай бұрын

Thank you for your comment！

@kirtishah9192 5 ай бұрын

Excellent performance

@DIYmotto 5 ай бұрын

Thank you for your comment!

@honoriosergio5454 9 ай бұрын

Muito bem feito. Vou tentar fazer, sou do Brasil. Obrigado

@DIYmotto 9 ай бұрын

Obrigado pelo seu comentário! do Japão

@ferdinandbasques7715 9 ай бұрын

TRES BELLE REALISATION.. BEAU TRAVAIL... QUELLE PRECISION...BELLES PRISES DE VUES.. FELICITATIONS.. 👍👍👍👍.......👏👏👏 ....🙏🙏🙏UN BRICOLEUR MARSEILLAIS

@DIYmotto 9 ай бұрын

Merci pour votre commentaire! Je suis heureux d'être félicité. Je continuerai à faire de mon mieux.

@geoffroy9659 2 ай бұрын

Bonjour, excellent travail bravo 👏 et merci très bien exécuté 👍

@DIYmotto Ай бұрын

Merci pour votre commentaire! Je suis heureux!

@rodrigoreitz7699 7 ай бұрын

Obrigado por compartilhar o conhecimento. - 知識を共有していただきありがとうございます。

@DIYmotto 7 ай бұрын

Obrigado pelo seu comentário! Obrigado por me assistir também!

@MultiAlenkar 5 ай бұрын

excelente trabalho. grato.

@DIYmotto 5 ай бұрын

Thank you for your comment! Have a great new year

@user-dm1gw2hd1q Жыл бұрын

目視可能なのは便利ですね。スライド丸ノコの代わりにもなりますし、突き当て部分に端材をクランプしてストッパーにすれば、同じ寸法の連続切り出しに使えそうです。

@DIYmotto Жыл бұрын

コメントありがとうございます！以前製作したレール部クローズタイプではズレ側発生したので、跳ね上げ式にしました。工房も使いやすくなって来たので、治具物見直し中です。マルチトリマーガイドは苦戦中ですが.....。苦笑

@alfanazzamcraft 9 ай бұрын

あなたのトリックはとてもクールで、非常に高品質です、日本は人々が賢い場所です、インドネシアからのご挨拶 🖐️🇮🇩👍🙏❤️

@DIYmotto 9 ай бұрын

Terima kasih atas komentarmu! Saya sangat senang.

@honoriosergio5454 8 ай бұрын

Sensacional. Parabéns

@DIYmotto 8 ай бұрын

Obrigado pelo seu comentário!

@nelsonsanchezriveronn4003 2 ай бұрын

Gracias...muy didáctico, y con sus medidas!

@DIYmotto 2 ай бұрын

¡Gracias por tu comentario! Lo escribiré en la sección de resumen. ¡Espere por favor!

@elabelcreacionesenmadera2687 Жыл бұрын

excelente trabajo, gran mesa de corte de apoyo por lo versatil te felicito por la idea. oscar desde buenos aires argentina te saluda.

@DIYmotto Жыл бұрын

¡Gracias por tu comentario! ¡Gracias por tu evaluación!

@williamlopez5679 2 ай бұрын

Acabo de hacer la misma guia con unos excedentes de madera que tenia solo compre el aluminio y me quedo perfecta y lo mejor muy precisa, los cortes son exactos muy buen video te felicito amigo, un fuerte abrazo desde Peru

@DIYmotto 2 ай бұрын

¡Gracias por tu comentario! ¡Estoy feliz de poder ser de ayuda!

@terrynagayo5964 Жыл бұрын

お疲れさまです。いいアディアの台ですね。丸鋸はそんなに大きなものは作らないだろうと125mmのタイプを買ったんですが、せめて　165mmにしておけばよかったと思ってます。労基署が言う安全な逆さま置きが出来ないタイプです（笑）。

@DIYmotto Жыл бұрын

コメントありがとうございます！最近、コンパクトで小回りが効く125mmを欲しいと思っています。ウッドデッキ製作など以外では125mmの方が良いなぁと。結局、2サイズになるのかなぁ。苦笑

@adrianverasay3893 10 ай бұрын

Espectacular me gustó tu idea, pensaba hacerme una y de las que ví, ésta me gustó mucho👏👏👏

@DIYmotto 10 ай бұрын

¡Gracias por tu comentario! ¡Encantado de ayudar!

@user-vt2kt4dh5x 9 ай бұрын

대단한 디테일

@DIYmotto 9 ай бұрын

코멘트 감사합니다!

@raulzabalajr6284 3 ай бұрын

New subscriber here,great work of art.👋👋👋

@DIYmotto 3 ай бұрын

Thank you for your comment! I'm happy!

@user-jx4cx6cb6y Жыл бұрын

いつも動画参考にさせてもらってます。前作ったスライド台では精度が良くなかったので、今回のものを参考にします！質問なんですが、今キャンプ用のテーブルを作ろうと考えているのですが、天板の部材が決まりません😢 見た目が良くて、比較的安価なものでおすすめはありますか？

@DIYmotto Жыл бұрын

コメントありがとうございます！スノコ天板でしたら、赤松材（胴縁材）にライトオーク位ですと明る目良い感じです。濃い目だとSPF1×4や1×2材ですかね。木目が整って綺麗なホウ材やマホガニー材の薄板をベニアに貼って板材にする方法もありますね。

@jairoantonio-jades 6 күн бұрын

BOM TRABALHO

@DIYmotto 6 күн бұрын

Obrigado pelo seu comentário! Eu estou feliz!

@osvaldopereira894 6 ай бұрын

😅 gostei muito da presizao dos cortes vou tentar fazer uma para mim valeu

@DIYmotto 6 ай бұрын

Obrigado pelo seu comentário! Fico feliz em poder ajudar!

@stoncold183 8 ай бұрын

Hi , i really liked that you shared your proyect. I'm starting to learn somthing of carpentry. I wolud like to build your wood template. Could you share the sketchup plan? thank you and grettings

@DIYmotto 8 ай бұрын

Thank you for your comment. DIY is fun. Please use it if you can help!

@robertgrlic6505 2 ай бұрын

Hi! May I ask what kind of wood for the rails? Soft pine wood or hard wood board like maple. Wonderful video!

@DIYmotto 2 ай бұрын

Thank you for your comment! It is red pine wood. It is quite strong when combined with aluminum rails.

@user-dn8mz5po4n Ай бұрын

素晴らしいアイデアですね😊 DIY の初心者ですが家にあった古い丸ノコではどうやってもまっすぐにも直角にも切れないので調べた所ベースがグニャグニャグニャでした。ちょっと危ない目にもあったので新しく買おうと思いますが、動画でお使いの丸ノコの機種をお教え下されば嬉しいです。粉塵アレルギー気味なのでホースがつけられるタイプを探してます😅

@DIYmotto Ай бұрын

コメントありがとうございます！丸鋸は危険だけど、使いこなすと良き相棒ですね。

@dherswood 7 ай бұрын

Kreatif dan menginspirasi. Terima kasih,salam satu hobi

@DIYmotto 7 ай бұрын

Terima kasih atas komentarmu! Terima kasih telah menonton!

@user-hh9hn4ny2m 6 ай бұрын

シナランバーもラワンランバーコアもホームセンターに限らず反りが。。。。こういったジグの動画すごくためになります👍いつも作ろうと思ってますが中々実行できずにいます笑スライドマルノコ欲しいけど高くて買えてません笑

@DIYmotto 6 ай бұрын

コメントありがとうございます！反り無し板探しはDIYerにとって、とても重要ですね。私は見つけたらストックしています。状態が良いのは中々見つからないですからね。スライド丸鋸は作業効率を考えてウッドデッキ製作の時に買いましたね。それまでは丸鋸オンリーです。

@zaferacar9295 Ай бұрын

Çok zor ama ana fikrim oluştu kızak yapımı için teşekkürler👍

@DIYmotto 29 күн бұрын

Yorumun için teşekkür ederim! Yardımcı olduğum için mutluyum!

@zaferacar9295 29 күн бұрын

🙏@@DIYmotto

@dimitrisgre7459 2 ай бұрын

Hello, congratulations for your design. To my opinion is one of the best out there. I am trying to do something like that and I need some help if possible. When I fixed the 2 aluminum edges I realized that my circular saw does not have a fully straight bottom plate, so the circular saw flickers between the aluminum edges for about 1-2mm. When I pushed harder the aluminum edges to the bottom plate the circular saw could hardly move forward. After that I measured the bottom plate and realized that is not perfect straight. Is that possible? My circular saw is a Makita DHS660 purchased new and used enough without any falls. Any suggestions please? Thank you in advance

@DIYmotto 2 ай бұрын

Thank you for your comment! I also had the base plate of my circular saw warped due to daily use. Remove it and check the degree of distortion using a table or straight ruler. I fixed it in a vise and corrected the distortion with force. If the distortion cannot be removed, it is better to request repair from the manufacturer.

@wahidin.9208 7 ай бұрын

Semangat 👍👍👍👍

@DIYmotto 7 ай бұрын

Terima kasih di atas komen anda! Terima kasih atas komen hangat anda!

@user-zz3yf9uy7h Жыл бұрын

2年前にmottoさんの動画を参考に丸鋸スライド台を作りました。以前のものは最初丸鋸の前部分だけをスライドに乗せそこから滑らせて全体をレールに乗せて木材を切るタイプでした。丸鋸のカバーは丸鋸全体がレールに乗ってから開くようになっていました。今回のものは丸鋸全体を最初からレールに乗せそこから滑らせて切るわけですよね。カバーはいつ開くのでしょうか。そもそもカバーが降りた状態から滑らせて大丈夫なのでしょうか。私も新しいものを作り直したいのですが、カバーの件が心配で質問させていただきました。

@DIYmotto Жыл бұрын

コメントありがとうございます！前作はカバーがカタカタとなる事とカット部材の目視調整がし難いので今回の製作となりました。カバーは丸鋸をレールに乗せる段階で少し開いてセットします。（安全の為、セットしてからコンセント等を入れてください）カバーの開きはベース板に沿って最小のままカットするので安全性が増していると思います。目視によるカット部材固定が出来るので、微調整もしやすいと思います。

@user-zz3yf9uy7h 11 ай бұрын

@@DIYmotto アルミレールを手に入れ、完成間近（65％？）というところなのですが、レールを止めているタッピングビスの太さや長さの適度なサイズを教えてもらえるとうれしいです。

@DIYmotto 11 ай бұрын

M3×12位が良いと思います。穴はビス太さの一回り大きい位が良いですね。

@user-zz3yf9uy7h 11 ай бұрын

@@DIYmotto ありがとうございます。やはり細くないと駄目ですよね。アルミ相手の作業をしたことがなかったので、参考になります。

@marcb8874 8 ай бұрын

merci , bien que il faut faire beaucoup de couple pour un bon usage car en principe avec un bon trait ou un guide .

@DIYmotto 8 ай бұрын

Merci pour votre commentaire!

@master-diman 4 ай бұрын

👍

@DIYmotto 4 ай бұрын

ありがとうございます！

@master-diman 4 ай бұрын

@@DIYmotto🤝

@ceazarryanlachica61 7 ай бұрын

maam ask kulang saang lugar po yan at magkano ang nagastos ?

@DIYmotto 7 ай бұрын

Salamat sa iyong komento! Ang gastos sa produksyon ay humigit-kumulang 3000 yen sa Japanese yen.

@user-ir8mh6dp5f 7 ай бұрын

ベースの板は平らなものとありましたが、おすすめの材質など教えていただけませんか？

@DIYmotto 7 ай бұрын

コメント有難うございます！品名は分かりませんが、表裏に3mm程度のシナベニア同等材が貼ってある18mm厚位の板がホームセンターで買えると思います。比較的、平面度が安定している製品だと思います。

@user-ir8mh6dp5f 7 ай бұрын

返信ありがとうございます！丸鋸買ったので、作ってみたいと思います！

@DIYmotto 7 ай бұрын

丸鋸デビューおめでとうございます！安全に注意して楽しんで行きましょう！

@liushuai2993 4 ай бұрын

Hello, after looking at many different designs... I find yours very interesting. Please could you help me with some questions I have for you regarding your design? 1. On the left hand side of your table against the back edge, you have the long piece of timber from left hand side of your structure to the far corner. That piece of timber is approximately 300mm long, I've looked over and over and I can't see the importance of it. Please could you tell me why you have it there at all? To me, it seems unnecessary because if you were using it as some type of border, wouldn't your resting block (which you have bolted to your table) be sufficient? You've gone to great lengths to include it in your design, though I don't see why. 2. On the opposite side of your structure on the hinged end, in the far Right hand corner, you've left that corner without any timber border at all. Again, I've tried to see why you've left that corner open... please could you explain why you have? I fully intend to build my own version of what you've created here, as I have the perfect place already in my normal work area... please tell me what you think of the following design? On the hinged end of your structure, have blocks the same size (both sides) as you have on the open end (from which you're standing at work.) Wouldn't this design reduce the amount of material that you're needing? If you had that corner blocked, (instead of leaving it open) wouldn't that eliminate the need for hinges at all? Please reply soon, I'd be very interested to know your thoughts... Thank you, Keith from Australia.

@DIYmotto 4 ай бұрын

Thank you for your comment. I don't know if that answers your question. . The square piece on the left is the center of the 165mm saw blade and is the effective cutting range position. The square timber allows fine adjustment of the right angle. The purpose of the hinge is to directly see the cut line and fix it in place. If it is a fixed type, there is a slide rail, so it is difficult to adjust the position accurately. Is the above okay?

@liushuai2993 4 ай бұрын

Hello again, thanks very much for your reply... I appreciate your time and your thoughts. Though I think you're missing the point of my questions. Your reply explains the use for your bolted block on your table, yes yes... I understand the need for this block for fine tuning your work. Though my question is why you need the longer block that you've glued and screwed to the edge of the table... on the left hand side of your hinged structure. Also I'm asking you why on the RIGHT hand side of your hinged structure, you've left that corner open. These are the things that I don't understand. Please don't misunderstand me, I'm not critical of your workmanship or your design, I'm simply trying to work it out why you've built the way you've built. This will then help me with MY design that has evolved Completely... from your design.@@DIYmotto

@DIYmotto 4 ай бұрын

it's okay. There was a discrepancy in the literal translation of the translation software. The left side is to prevent veneer distortion. The right side is open for visibility of the circular saw blade position.

@liushuai2993 4 ай бұрын

Hello again, right! Now I understand completely why your design is the way it is, thank you! My name is Keith, I'm Australian... living permanently in Australia. Retired with a pension, my workshop at home and vegetable consume my entire existence😊😊... normally I don't join anyone's particular channel though with yours I'll make an exception. I'm looking forward to seeing more of your work, perhaps we could compare designs of different pieces we've made in our own particular workshops. Please let me know if you're interested, thank you. Keith from Australia.@@DIYmotto

@DIYmotto 4 ай бұрын

Thank you! I'll do my best to make it easier to see and understand! It gave me courage.