Circular Saw Cross Miter Cutting Station - DIY - How to

In this video; I will be building a tool for cross cutting and miter cutting with circular saw. A great jig for wood cutting ! 22.5, 45 and 90 degrees cutting is easy with this cutting station. If you wish, you can easy build this tool. Just watch this video completelly. This is a great circular saw guide.
Dimensions web page : www.greensawdiy...
#circularsaw #mitercutting #sawjig #diy #crosscutting #circularsawcrosscutjig #circularsawmiterjig #circularsawtrack #woodcutting #woodworking
Subscribe www.youtube.co...
My website : www.greensawdiy...
Play lists:
DIY Power tools : • DIY Power Tools
WoodWorks : • Wood Works
How to ? : • How to make ?

[@ifulchannel3979]

विदेशी लोगों का ज्ञान वास्तव में असाधारण है, बहुत प्रेरणादायक है, परिष्कृत उपकरणों की पूर्णता के साथ, काम आसान हो जाएगा, खासकर यदि उपकरण को संशोधित किया जाता है, तो काम करना उतना ही आसान होगा।मैं इंडोनेशिया से हूं और उनके कौशल को हमेशा सलाम करता हूं और उनकी सराहना करता हूं, बहुत उपयोगी ज्ञान साझा करने के लिए धन्यवाद❤❤❤❤

[@MrKoka1183]

Need the same - initially I've built table saw, but it occupies too much space in my shop where every sq.foot counts. Plus still need saw to use in hand (don't want to buy one more saw, neither do want to extract mine from table and then fine-tune it again). So disassembled the table and now surfing for ripping cut jig & cross-cut jig ideas. General idea with pad, two rails and miter gauge is not unique, but youtube has infinite amount of variations for this miter jig. Your build is the coolest one among all I've seen so far. Idea with clamp and pre-drilled nuts for some angles (22.5, 45 and 90) is very smart. I'm also going to put 30 and 60 into my build. Other builds that I could find are made with table saw, miter saw, and a bunch of other tools. But why anyone will need such jig, already having miter saw?? Your one is built with authentically minimum amount of tools - saw itself, drill, hand saw, chisel, couple of clamps and square. If there was no nailer - I'd call this set a "bare miminum" of tools. :D Respect.

[@lurkingcorsa10]

Greensaw, gokmen, mistry make tool, and mazzay are the Idea maker of jig😋

[@GreenSaw]

Dimensions web page : www.greensawdiy.com/circular-saw-cross-miter-cutting-station-dimensions.html

[@luizsilva3686]

GreenSaw d

[@ADAI_362]

Мықты Мықты👍👍👍👍👍👍 Hello is Kazakhstan Almaty✋

[@thebluegoonie]

Ingenious. One of the better jigs for a circular saw that I have seen on KZbin. I particularly like your built-in clamp! I'm going to build this.

[@GreenSaw]

Thanks 👍

[@3abdo9arawi53]

المعلومة مفهومة اعطنا فكرة

[@Meticularius]

8/28/2020 USA Grandpa Bill: RCTURKA you actually made me smile during your application. Thank you. Excellent job. Now I'm going to go make mine based on yours. I just don't think I can work as fast as you do here. (Afterthought: I'm subscribing because you do have high-quality work that you make on your channel. I'm an experienced 72-year-old woodworker and we never retire.)

[@GreenSaw]

Thank you for your nice comment, Do it yourself everyting !

[@tombertas2864]

Very good job mate 😁👍

[@viswanathanramakrishnan7613]

Your wood working jigs are superb. Please post the dimensions in the show ore area so that people like me can try to make it. keep posting such useful videos.

[@bd5qce]

做的太好了 我也要做一个 向你学习👍👍👍

[@mustafatumer6558]

Çok güzel ustam teşekkürler hemen yapacagim iyi akşamlar 🇹🇷🇹🇷🇹🇷

[@GreenSaw]

Beğendiğinize sevindim. Yorum için teşekkür ederim. Yaparken kolaylıklar dilerim.

[@marleneferreira1375]

Vou fazer também. Obrigada pelo vídeo, amei. Palmeirópolis Tocantins Brasil.

[@GreenSaw]

Estou feliz que você gostou. Obrigado pelo seu comentário.

[@Panayiotisq]

nice!

[@CriticalThinker1967]

I like it

[@krioca35]

Very good project! Thank you!👍

[@GreenSaw]

Thanks for watching. Glad you like it.

[@onurtunc9468]

Üstad, sınıfının en iyisi diyebilirim. Hem yapımı kolay, hem bir o kadar profesyonel kullanışlı. Tebrik ediyorum.

[@GreenSaw]

Teşekkür ederim Onur Bey yorumunuz beni çok sevindirdi.

[@jimmycrum8107]

Great idea 💡

[@MSBilalderya]

ellerine sağlık super

[@jorgecinelli6706]

Excelente,una herramienta super ùtil,muchas gracias y lo felicito,es un gran ayuda para el taller,saludos.

[@GreenSaw]

Thank you Jorge...

[@diymaker7373]

Me gusta ami tambien

[@majigaining]

Love the clamp idea.👍

[@guillermomunoz1037]

Buen día excelente tu presentación y muy buen trabajo, una pregunta que cinta es la que pones para que corra bien la cierra, gracias y saludos de México CD MX

[@josejaviersalinas822]

Que vien trabajo 👍

[@centauro3737]

Después de buscar y buscar video tras vídeo !al fin encontré lo que quería!! Excelente trabajo!! 👌👌 Gracias!

[@SraJDM]

I like the way you have little signs everywhere on your tools that says, "Thanks for watching." Liked the video too. Good job!

[@GreenSaw]

Thank you so much

[@edmarguilherme3705]

Show de bola parabéns

[@gdanribeirogdan446]

Gostei do grampo que vc criou para prender a madeira

[@jorgeleiva6411]

Muy bueno amigo, su trabajo es importante por lo sencillo y preciso a la vez, un gran aporte al universal idioma de los laburantes.

[@GreenSaw]

gracias

[@diymaker7373]

Buena idea

[@Lethandstry]

GREAT WORKING!

[@GreenSaw]

Thanks!

[@jopperdepopper]

I like the clamp... 👍

[@echtnochnichtda]

Top! Ich finde übrigens auch gut, dass Deine Videos ohne Hintergrundmusik sind.

[@ekhles104]

Excellent

[@GreenSaw]

Thank you.

[@alexzl1958]

молодец я тоже сделаю так же спасибо за видео

[@MauricioGoncalves.]

Nice!

[@leslyserfino8327]

nce idea

[@ЮрийБрамс-м4ь]

Alles Gut ! Ausgezeihner werk !

[@GreenSaw]

Danke.

[@neidivan1295]

Legal mesmo 👏🏽👏🏽👏🏽

[@JoaoSilva-pp4jh]

Saudações do Brasil

[@GreenSaw]

Olá...

[@eraldoalvesmartins7122]

Excelente 👏🏻👏🏻👏🏻👏🏻

se podría poner la hoja de de la sierra a 45° ? funcionaría ?

[@GreenSaw]

Hola, se puede ajustar pero no es muy útil. Es necesario bajar la sierra.

[@blancaflorzuniga1149]

muy buena idea para facilitar los trabajos gracias

[@ЮрийВерхов-ш4ъ]

Интересная идея!

[@radioparanoiko1566]

Muy buena idea con esta herramienta púes facilita más los trabajos, gracias por tu aporte desde México Nezaland City

[@farukgungoroglu8067]

Super👍👏👏👏

[@Serega_Siniy]

Красавчик,лайк,подписка из Беларуси!!!)))

[@ELCADAROSA]

Very clever! This is a five-year-old video ... have you made any improvements to this plan based on your experiences?

[@GreenSaw]

Thank you for your nice comment. Did you see my last one? kzbin.info/www/bejne/eZ_GfmiQgp1glZY

[@ELCADAROSA]

@@GreenSaw, just did! 👍🏼👍🏼

[@sanyokbabenko4812]

Добрый день! Марку пилы не подскажете!?

[@RixtronixLAB]

thanks for the information :)

[@mynameisbond711]

Cool 👍

[@thor-ce1yi]

You need to put some instructions to your video.. And measures.

[@aloisiorogerio4430]

Olá. Vc adapta outras máquinas também .. tico tico tupia ?

[@GreenSaw]

Receio não compreender a sua pergunta.

[@faycelyengui4356]

BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO

[@patrickguyot1290]

Dont the rail guides bend when you run the saw accross?

[@GreenSaw]

I didn't see enough bending to be a problem. Have you seen the last thing I did?

[@patrickguyot1290]

Hiya, i dont know if i have but i will have a look😊

[@emrekelkit3184]

Selamlar, 2ah batarya testere için yeterli mi ? Bu batarya ile testereyi rahat kullanabiliyor musunuz, yaklaşık ne kadar süre çalışıyor ?

[@GreenSaw]

Merhaba, 2 amperlik batarya bu testere için az. En az 4 amper almanızı tavsiye ederim.

[@sssteve5430]

The only problem I see with the railing from wood, it may not be 100% perpendicular to the cuts with the saw.

[@johnnymp5386]

that was the same as i saw, i think that a metal angle it is firmer

[@redfalconvfx7050]

yes wood will also change it's size due to due to weather change

[@Gizemli1Adam357]

Beatiful !

[@GreenSaw]

Thank you

[@Mirpurmad]

looking for a DIY setup that cuts vertically

[@blade1663]

Thank you GreenSaw

[@pulpo439]

¿Cuántos mm pierdes en la profundidad del corte (10)?

[@DIYFixMan]

nice

[@КонстантинЕмельянов-у1я]

отличная идея! браво

[@GreenSaw]

Спасибо

[@user-sn6wz5rg8w]

tezgah ölçülerini de verirmisiniz

[@damarcastro768]

Ficou muito bom top demais

[@ilknurozkan4524]

Good job..

[@АлександрХолодков-б1щ]

Просто дёшево и надёжно 👍🏼

[@GreenSaw]

Спасибо за ваш комментарий.

[@cyrus3055]

Those long strips of wood are bending under the load of the saw are they not?

[@GreenSaw]

No never a problem!

[@cyrus3055]

@@GreenSaw thanks👍😁

[@mastercell14]

friend what is the name of the tape that you use that is double glue

[@nicedick4697]

тройной

[@jersonpadilla254]

Buen día amigo, por favor necesito saber las medidas, soy un aficionado.

[@diymaker7373]

Yo tambien

[@cachorro-chimbote-peru636]

Hello friend, I see your videos and I am impressed of your work, your works are very beautiful, do not forget to always upload the drawings of the dimensions and materials, blessings from Chimbote - Peru

[@GreenSaw]

Thank you for your nice comment and advise. Best Regards.

[@geeko2010]

Would it be possible to know the dimensions with the intention of making an equal? I liked the idea. Thank you for your work. Impressively simple

[@GreenSaw]

Thank you so much. Soon I will be wrote the dimensions in the descriptions. Please look after a few days.

[@GreenSaw]

Hi, sorry for delay :( please see this web page www.rcturka.com/circular-saw-cross-miter-cutting-station-dimensions.html

[@edherrevideos]

Sencillo...bueno...like!

[@yasartoprak2920]

Ray için kullandığın ağaç nedir ? makinanın ağırlığı baz alınddığında esneme yapıyor mu ?

[@GreenSaw]

Sorduğun bu soruyu diğer yorumlarda da görebilirsin. Elbette bu kalınlıktaki her ahşap esneyecektir. Ancak esneme birkaç mm den ibaret. Ayrıca dikey doğrultuda esnemesi sorun teşkil etmez. Önemli olan yanal düzlenmde esneme olmaması. Ayrıca dilersen ahşap yerine metal de kullanabilirsin. Tabiki bunun için uygun metale sahip olman gerekir.

[@pedroribeiro8812]

Oi bom dia eu gostei de sua ideia ,ficou muito boa suas explicação sera que pode me passar as medidas deste gabarito

[@astree214]

Great job ! But I'm very sad, I now have to throw mine away and make a new one, like yours :-( Tks for sharing the tips ;-)

[@GreenSaw]

Thank you for your nice comment. ;)

[@63Ruslan]

из минусов, сразу видно прогиб направляющей, в середине, нужно или более толстый брус что украдет толщину реза, или лучше стальной уголок

[@jayanthibalan31]

Super wor

[@GreenSaw]

Thanks.

[@edvaldofranciscodasilvafra3553]

Muito bom gostei 👏👏

[@hansdriesen1685]

Geweldig wat een mooi ding, ga ik maken!

[@jean-pierre-cane]

Bonjour, Quelle est la marque et le modèle de scie circulaire svp ? Merci pour votre partage. Bien à vous

[@GreenSaw]

Bonjour, Einhell TE-CS 18 Li

[@jean-pierre-cane]

@@GreenSaw Bonjour, Merci pour votre attention. Avec lame de 150 ou 190 mm ? Est-ce que vous êtes satisfait de ce modèle ? Merci

[@justinepaulodamaso361]

What is the name of the tape you using on sliding your circular saw?

[@GreenSaw]

I used double sided tape. His slick face works.

[@ardakahraman1077]

Daire testere ne marka acaba

[@anos9081]

Muito bom

[@redfalconvfx7050]

why you need 90°? if your fence square with your Saw Cross(Railing or angle bar) it will have 90° automatically... it will be better if you have 60°,45°,30°,22°,20° and 18° markings cox those angles are very useful to have.

[@pulpo439]

Ese carro no desliza, mi amigo. Eso es una bomba de relojería, la cual puede estar para cualquier momento impreciso, PERO, SEGURO.

[@giorgioclavelli1757]

Love it!

[@daturadj001]

MI PROXIMA HERRAMIENTA DE CORTE

[@許曼軍]

Great

[@GreenSaw]

Thank you.

[@willie9397]

impressive!

[@GreenSaw]

Thank you. :)

[@canaldoportugues10]

💯💯💯💯💯💯💯👌👍🤝

[@sethjones4916]

Nice job. Maybe I'll try it. What is that yellow tape called, and where could I order some? Thanks.

[@GreenSaw]

Thank you. It is a double side tape.

[@maker202]

Beğendim elinize sağlık.

[@GreenSaw]

Teşekkürler

[@drflfonseca]

My friend, congratulations on your work! But you used very fine wood to support the weight of the circular saw in relation to the distance to be traveled and you have a very "nervous" hand with the nail gun. That's fine.

[@GreenSaw]

Thank you for your advise...

[@diymaker7373]

You can use 1/2 inch angle

[@vladimirlistov4171]

👍👍👍

[@Angelo-sr6dl]

Parabéns excelente projeto.

[@alideniz9677]

dostum olcüler koyarsan daha guzel olmaz mı

[@GreenSaw]

www.greensawdiy.com/circular-saw-cross-miter-cutting-station-dimensions.html bu adresde ölçüler var. Aslında bu bilgiyi video açıklamalarında yazmışım dikkatinizi çekmedi mi ?

[@axklbs]

Great! It was about time to stop cursing every try I mafe to make a perfect cross cut by hand! Thanks from Greece

[@GreenSaw]

Glad you like it. Thanks.

[@Александр31-йРегион-г5щ]

Интересный канал, смотрю комменты не по нашему, а оглавление по русски, подписался, заходите в гости, может и у меня что то интересное будет.

[@yurchik7916]

Не проще было два алюминевых уголка использовать??

[@williamberbel6192]

Bom dia muito bom gostei de mais parabens

[@wladiwar75]

Спасибо Вам.

[@АлександрКурьянов-в4б]

Зачёт.

[@Vovan-i1j]

А пре наклоне циркулярка будет задевает за болт который держит планку

[@GreenSaw]

Такой проблемы не было