How to Make a CNC Drawing Machine at home

[@chinmay_tamhane]

man you are awesome just one suggestion plz give a voice over so that everyone could understand better

[@manickn6819]

Some time ago I was considering making a similar device but I really don't have the free time to complete in a reasonable time frame. Clearly a lot of work went in. Many who are not accustomed building may underestimate what they see because you make it seem so simple. Anyway good work.

[@_rui805]

Thank your videos! I want to make a writing machine too. Can you give the source code for me?

[@Dr.aku1a]

Good and cool project! Add an SD card and a G-code reader to the Arduino (also, for select file will need display and controls). Then add a battery and the device will become self-contained, independent of the computer. It would also be nice to redesign the mechanism of the pen. The option suggested in the video is too difficult to replace the ink.

[@saatvikak2000]

As a beginner to robotics, how should i develop my skills in robotics? I know some arduino. Any Recomendations? Can u please reply?

[@wasanthawimaladharm]

Warriors Fan #1 try an obstacle avoiding robot that is vaery simple and interesting way to get the best of arduino

[@tinelogar6312]

Just go to ebay and order lot of sensors, motors, displays and then you just start with one of them. When you know how to use what you gought then you can make everything.

[@dangjoeltang]

I would say that being able to have a solid understanding of programming arduino, raspberry pi, or other micro controllers (usually C/C++) is the most important, followed by learning basic circuit theory and the different types of transistors and what they do. For most basic things that should be enough. When you get into more advanced projects, things like real-time capability and power efficiency become more important.

[@arvindh13]

take some semi-big project like 3d printer/cnc router r something similar and try to make it by searching hw is it made and see some videos,thats what i do.

[@yenle7296]

CNC from Arduino is impressive.This video will help me a lot

[@prakharsrivastavaog]

You are amazing i didn't see anything like that

[@GAMETHERAPISTYT]

From where you bought small wire connected like in the uno, at the end

[@marciolima7975]

Great project! The only thing I can say is that you are fantastic! Truly amazing! You're great !!! Do you sell this product somewhere? Congratulations

[@DevineIshaq107]

Neat Build , You have a very well arranged persona . and inherit lots of blessings from your ancestors . My regards to your Parents and Grand Parents.

[@cesarparra5862]

Hola hice el proyecto tal cual con respecto al software pues es más sencillo que con el Universal GCode sender y me funcionó los motores se mueven al unisono ahora quiero aprender más sobre la configuración del software para manejarlo bien todo y sacarle el máximo provecho gracias por el vídeo. :-)

[@Jafet.Fitness]

Hola amigo estoy en proceso de este proyecto ya casi lo concluyo pero tengo algunas dudas no se si pueda ponerme en contacto contigo para que me ayudes, te lo agradecería demasiado.

[@antoniogallesi]

hola bro me podrias ayudar porfa, he hecho el proyecto y todo bien pero no logro hacer que el servomotor se mueva, he revisado todo y si esta bien conectado, ayudame plis, nose si sea algo de la alimentacion y de cuanto voltaje y amperaje acepta el proyecto

[@johnschroeder6288]

You make it look so easy. Excellent, thanks.

[@PrathameshJakka]

I have completed the project as shown in the video if anyone has any difficulties comment below Please like this comment as other people might find this comment easily

[@kichurock8723]

How can I get that firmwire

[@PrathameshJakka]

www.mediafire.com/file/hb22rv2rcyn7vc7/file-CNC.rar

[@kichurock8723]

Thanks as soon as I finish this project I will let u know. Txnn for replying

[@PrathameshJakka]

If any other difficulties let me know

[@PrathameshJakka]

What do yo want to know

[@patprop74]

Very good project ! i'm surprised no one has used the base of your little machine and made 3d printed parts to make the assembly more user friendly , In a few weeks , I ll have some time on my hands, if you like to collaborate, I would be willing to Cad out a design for this so we could all enjoy this project more easily.

[@PescarStangaci]

take a picture of someone's signature and replicate it with this :D

[@joymandal334]

lol

[@rohitpawar895]

Adrian S a big salute

[@shridhartiwari2303]

hahaaa

[@maninidas5661]

Hey can you say me... That.... What is the small black think u joined it in CNc v3 shield..... Plzz say me... I m doing this project ..but confused

[@AbbasAli-fm1mh]

jumpers...

[@k0rz4k]

I start my project today, follow your steps, all is OK, thanks bro

[@tarannummomin2310]

Which model of dvd writer did you use Because the one I opened is not the same

[@nathannainggolan3842]

Can you Give some Advice Why My Arduino is burn ? I give 12 V battery to CNC

[@nisargpawar9816]

will you plz plz make saperate video on how to progress and run arduino . which software to use. plz

[@yavuzyavuz6224]

zeka ve yeteneğin ortaya çıkardığı eser. mükemmel.

[@serimseryan2622]

stepping motors are heated because you do not properly configure the controller on the driver

[@mr.universe4137]

same problem

kzbin.info/www/bejne/jILEnq1seZV_rbs

[@dontsmilexx]

Hi, very nice idea. Can I use 12V 2A Adaptor instead? On Arduino CNC Shield V3 is written 12-36V.

[@elpri02]

hey i love your videos!! because always let my imagination fly... and i was wondering what if i want to parts from my old printer to expand the area of the drawing?

[@AredaMohammed]

elpri02 me to like ur quetion

[@doriansolares1266]

Muy bien el CNC hecho en casa. Ahora otro CNC de 50cm x 50cm la superficie para trabajar, hacer placas PCB con el CNC, sería EXCELENTE si lo haces con esas dimensiones. saludos Kenh sang

[@smartwerker]

Back in my day we called an apparatus like this --- a printer.

[@gunnerkobra]

Does your printer print vectors? I don't think so.

[@Hydrush]

you are just awesome bro.... i have completed making this cnc machine watching your tutorial...and i am soon gonna upload the working video of it in my channel ... thank you so much bro ..... :) :)

[@_N_E_E_R_A_J_]

What can be used as an alternative of aluminium composite?

[@ranamusab5627]

You can use a Plastic sheet

[@zaca3099]

I loved this video. It would be great to see a simple 3d printer using a 3d pen.

[@ChristianJoyAzucenas]

Missing: PVC pipe and 775 motor

[@latestsongs9631]

Me too

[@shambhubishwas5567]

Lol Me too

[@somethingsea]

I think "PVC pipe" series is OVER

[@vnlovez]

haha :v

[@YalcnCan26]

And glow plug :)

[@GAMETHERAPISTYT]

Is I can use the Broken DVD drive????

[@umangrajput5353]

Can you please give the program of arduino uno r3 if required...?

[@vyascommunicationabouteduc2493]

Can we use jumper wires instead of female header pins...

[@seemajaved5744]

Is there a need to program the Arduino

[@suryafanzzz6175]

Yes but they didn't give that

[@Paul17yo]

where i can take that program ? :(

[@wasanthawimaladharm]

did you adjust the potential meter for resister value of 2× A4988 driver module?

[@josellorente16]

Awesome, very coolWhat´s the arduino code ? Can you upload it?

[@matzegaming27]

It's the hex File

[@cleverfairy2065]

做的真好啊，越来越喜欢CNC了

[@MarsShare123]

Bro if the servo no going to work well what I need to do

[@ranamusab5627]

Same issue

[@ranamusab5627]

Help me too if you get any solution

[@DiegoSilva-pc4ic]

de todos os modelos que eu já vi no youtube o seu foi o melhor e o que eu mais gostei!!! parabéns

[@jigarlodhia287]

Awesome bro...!

[@ashutoshchauhan1256]

Really smart work with the servo and pen

[@surajmaurya4802]

Sir, you give 5v to cnc v3 shield but it need 12-36v how it run And my DVD stepper motor is very heated So what I am doing

[@Kbcwriter]

Suraj Maurya can u sell this

[@surajmaurya4802]

kbc writer No, but I making this as my college project

[@Kbcwriter]

Can you help me to make this

[@surajmaurya4802]

why not

[@Kbcwriter]

Send hello

[@ailtonmk11]

very good design and well explained. Congratulations

[@CarlosFilmagem2008]

sensacional!!!!!! muito bom parabéns¡¡!!!¡¡!!!!!!!!!!!!

[@chmtr]

Esta é muito boa porque dá para escrever em qualquer superfície.

[@robinorhysrhys1562]

Amazing! Great mind at work. Thanks for sharing. 2 comments:1) Suddenly one thought came what if instead of ink pen you would use glue gun. You could make more accurate fancy replica/mould objects and other stuffs2) It is probably the basis of 3d printing as this one build is only stepping x and y axis

kzbin.info/www/bejne/jILEnq1seZV_rbs

[@ryankharrazi5411]

Can u *PLEASE* leave a link to *EVERYTHING* you used. I can’t find the old dvd 📀 drives online! And I don’t want to spend too much on the items. Thanks :)

[@jenishchapagain2253]

Is it unipolar or bipolar steeper motor?

[@databanks]

check with your local PC store - they might have some dead ones awaiting recycling

[@Huppat]

Almost the best you can do with Glue. :D Nice Job.

[@milayoung5803]

Here is www.3dmaxprinter.com/shop/do-it-youself/polar-pen-drawing-machine-plotter-arduino-diy-kit/

[@bhanupratap8874]

please tell me about arduino CNC codes

[@yehya2715]

hey is not a code it's an application

[@fahmidashaikh7061]

Hii Nice project I'm making it for my science exhibition, but I just want to ask that the servo motor we have attached to the stepper motor is moving little bit jam Then also the machine will work fine na??

[@leenasingh1877]

Not working properly. No working sarvo moter please help me

[@NASEERAHMED-gw1dp]

Akash Poet yar ya sman kha sy mly ga

[@shanagondaarun2436]

Same here

[@ranamusab5627]

Same issue with servo

[@wodzimierzmocny1164]

My servo is not working. Fixed in one position. how to fix it?

[@ranamusab5627]

Bro i am getting issue with servo motor because it does not work when i use frimware that you have given in the discription so kindly help me

[@wodzimierzmocny1164]

My servo is not working. Fixed in one position. how to fix it??,

[@wasanthawimaladharm]

did you give any arduino code uploading as well for this project ? , did you included GRBL library. my dvd motors didn't responding to commands fro pc program only servo motor at pen moves. where could be the problem?

[@yashshah4831]

Use 12v adapter for CNC shield .

[@sewasaransatsangi1527]

but my servo moter dis not work

[@yashshah4831]

sewasaran satsangi servo will started it's work when you give a power from computer. It doesn't need any outer power source

[@sewasaransatsangi1527]

I also give power from computer but servo is not work.please help me sir

[@yashshah4831]

sewasaran satsangi check connection of servo and also check that servo is working ....

[@IgotHeliFever]

You my friend are a Genius ! I watched your videos on the scooter, inverter and the rc boat and thought Wow! But this was truly Amazing what talent! Are you an Electrical Engineer or a student Studying Electrical Mechanics? Anyway I'm subscribing right Now, 4:20 Am in the U.S and watching all your Videos! Thank You Sir!

[@Shubharora18]

it is a homework machine.

[@cuongnguyennhat5005]

That's what I'm thinking :v

[@legitbuddy891]

same here

[@devashishlahariya5161]

Shubh Arora same with me

[@netrapatil2169]

u cant use coz u donr even know how to maje even after watching

[@sanskar_vines8049]

Me too.thx for idea

[@user-kp1du9oo2o]

MIN 1:40 one question I can also use a 5V 1AMP adapter if I have one of 2 AMP

[@prakashmandal5924]

can I make images with android mobile?

[@inguitv1225]

You should need to connect Bluetooth or Wi-Fi module to arduino

[@suryafanzzz6175]

Connect it to mobile with otg cable

[@MahdiTasa]

Hello Excuse me, I did everything right by training, I tested the motors and installed it on the board. The sero-motor is healthy But the one who wants to do it does not move left and right. The seromuter does not move. The problem is where I tested the 12 volt adapter 1 amps and 5 volts of 2 amps. Both of these would result.

[@wodzimierzmocny1164]

My servo is not working. Fixed in one position. how to fix it?

[@shaikzakeer6513]

very nice

[@mdrafique9295]

Very nice CREATION ----!!!!

[@turquiesisne2952]

harika

[@ilimahmudova2434]

aynen

[@TheMuhendistv]

çok hoşuma gitti yazın yapmayı düşünüyorum.

[@rupesh.l160]

Turquie Sisne i

[@akashsunny5134]

Can we use bigger stepper motor which requires 12 v supply and will the board support that

[@pratyusha1588]

Where is the code for arduino ?

[@sameenarahman1090]

Man it does not require any code u must need to install arduino uno and benbox

[@sameeramomin2789]

@@sameenarahman1090 where do u get it from Can u explain how to do it please

[@Prence]

Of all of his projects, this is the one that I really want to try to make. This is amazing. One question, can this be made larger to handle a sheet of typing paper. I would like to make it so it can use a whole sheet.

kzbin.info/www/bejne/jILEnq1seZV_rbs

[@Prence]

@ thanks

[@ALIUSMAN-us1ie]

where is firmwhere

[@akki4750]

bro instead of aluminium composite...can we use cardboard

[@rambhamishra5691]

Pls help me updating my firmware

[@ahmdabdallah2132]

Rambha Mishra 🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.

[@thejusboommen803]

What is the problem

[@bindiyapatel9166]

Which board is good n light in weight to make this project and is any program to be processed in aurdino or we can directly use binbox software

[@pawanmehta8394]

sir can u please sell this this 2 me...

[@AdventurewithAkku]

I can sell you this.

[@sariahlopezfierro6653]

interested! do you ship to US? how much for the machine?

[@chuttiesgalata4651]

Akash Raj how much I am in chennai

[@tanmayislam855]

I have one .

[@sariahlopezfierro6653]

are you selling it? how much? do u ship to the americas?

[@mohammednihad6755]

Thanks a lot man 😍 That saved me 💙

[@creativehaque]

brother i need one... can you help me plz

[@bls7879]

Creativity overloaded

[@AAZIZBouzianeTVweather]

This beautiful flag and entertaining and profitable Hospitais da Universidade de Coimbra. But beware that we greatly appreciate the epic glue products only.

[@dragoneye1986]

Pretty sick!! thanks now I need to search my old drives :D:D Glad I can blame you on the chaos I probably going to make :P keep it up!

[@clgproject]

nice work what is that sheet, looks like plastic????? please reply

[@ultrakh]

대단하네요 따라하고싶어도 엄두가안나네요 ㅎ

[@yuvrajsinghchouhan4856]

hey bro uhave done awesome work in easy way , but can u give the list of all [a-z] material name of every needs means nameof tape u used also

[@pascalpetitpas7866]

Hello what is the type of connector that you add to connect the adapter 5V 2A? Thanks if not beautiful work.

[@arifaziz4631]

Realy Creative....thank you sir

[@talemmahnjadeed]

Yes you are really good teacher Thanks to you

[@sayalrai9880]

U are the best.

[@wasanthawimaladharm]

i made this project 5V 2A given to CNC motor shield board successfully connected with PC software after update but i have few problems (01) thread of pen broken every time i powered this unit with PC connection (servo rotate too much at start) (02) during the drawing of sample picture servo of the pen only works well X & Y axis motors from DVD drives are not working and Y axis motor also heated up during drawing is progressing by PC i checked both dvd motors they works well motor connections to CNC board done as your guidence please be kind enough to sort out this problem, thanks.

[@akashkundapur7256]

Sir can we use aurdino nano instead of uno by connecting cnc shield by wires

[@hamzaouamrouche6272]

Good WILL and searching small parts in addition to each countries with open/close Market North South finally to focus in this PURPOSE

[@sathya-rg9sl]

Is the 2 pin jumper is necessary for the CNC shield v3 board ?

[@iengskhemmarak9480]

Hey how about a plastic recycler filament extruder can you make one? It will save waste plastic and also our money

[@doesoh7666]

Nice project sir, can i use arduino mega on this project?

[@eduardoroman2851]

Good video ... could be done with dvd players of the play station?

[@rodrigovidal8421]

If you put a burning laser workshop...Good Jobs!!!

[@МаксимЖуравлев-е2г]

Have you checked the adapter with a multimeter? Does he accurately give out 5 volts of 2 amps? Вы проверяли мультиметром адаптор? Он точно выдает 5Вольт 2Ампера?

[@anonimkullanc2864]

Would it be a problem to use the DRV8825 stepper motor driver instead of the A4988 stepper motor driver?

[@FRBoys]

very very nice and your mind so good that's I think you next cretive there soon

[@THESheikhBros]

Can I use anything else than the Old DVD Writers??? Or Do I need working OLD DVD Writers for this project or out of order ones may be used...??? Plzz somebody tell...

[@ali_ahmed372]

what's the name of this dvd drive? like, LG,samsung or asus?? because my dvd have 1 steel, you have 2.

[@shouryamittal3096]

whats the little black things that u put on cnc shield v3 for connecting wires???

[@wasanthawimaladharm]

how much voltages did you give to cnc board?

[@RajendraVermaa]

Very innovative. Amazing

[@rajeshrishi26]

I have completed the project, everything is working properly,,, but my servo motor is not moving....what is the solution ??

[@AzharAli-ck7dc]

I have same problem but nobody reply to solve my problem. Probably you got some solution. If you have plz tell me. I am waiting bro

[@rakhshandacookingsecrets8116]

Will the CNC shield work without endstops?

[@emanmurtaza9182]

Hey..... what is the thickness of that aluminium composite he is using?????

[@raahimirfan5996]

Can i use l293d motor driver shield instead?

[@basilstadnik1342]

давно искал подробную инструкцию ! спасибо

[@chaitunani4ever]

hi can we use same firmware for motorshield ?...I know this is weird question..still...with some modifications can we replicate cnc shield to motorshield V1...

[@ravichauhan6889]

Which dvd writer do you use..?? Please tell me...!

[@snehalr1611]

i have made this project but one motor on y axis is moving only in one direction