How To Make A Custom Heat Shield For Your Intake

  Рет қаралды 9,522

Texas Honda Channel

Texas Honda Channel

Күн бұрын

Пікірлер: 53
@davidleslie949
@davidleslie949 4 ай бұрын
Excellent work! Love the newer generational thinking. I used to criticize the younger generation until I realized how many good ideas they had when it came to solving a problem such as global warming & the state of disrepair we've left behind for others to clean up and fix. For every 1 positive good comment you receive will generally be followed up with 9 negative. Unfortunately, it's human nature and very comfortable to criticize when compared to praising someone as it's far easier and satisfying to criticize one's work instead of doing what's right, and saying nothing at all unless it's constructive criticism or praise. You mentioned that you were suggested only using the cardboard template, covered with gold tape, to which you replied "oh no that's the old me". I believe the viewer was suggesting to only use the cardboard template, cut out, covered with gold tape in order to decrease the overall weight of your vehicle given the fact that your goal is an increased and horsepower or better said to lessen the loss of potential energy your engine can produce. Using cardboard you would greatly cut down on added weight within the engine department while saving some money and time as well. Try to look at ones comments from a viewers, perspective or someone else's perspective in order to better understand where they may be coming from in order to not miss a message being relayed to you. we often misinterpret text messages or comments that we read not being able to I understand someone's intent through words alone when compared to in person. Try to clear your head and maintain an open mind prior to reading your messages in order to not unintentionally misunderstand due to how you're feeling at that moment. If you're in a shitty mood, almost every message will appear to be negative because you may feel someone is being sarcastic when they're actually giving you positive feedback. Try to give someone the benefit of the doubt to the best of your ability. I may not be as creative as I used to be when I was younger? However I still have many lessons to be taught through many of life's lessons that I've learned from after many many mistakes & far less successes. Thank you fur the great ideas that I will be applying to my RAM 1500 in order to maximize potential energy by maximizing efficiencies within the engine compartment.
@chrisrobles2012
@chrisrobles2012 3 жыл бұрын
Always watching the channel. THC notification gang !
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
I appreciate that really do.
@hondatriple6
@hondatriple6 3 жыл бұрын
THC👍🏿lol
@centraltexascivic7299
@centraltexascivic7299 3 жыл бұрын
Once again something so small is so important great job brother !!!!!
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
You got that right!
@davide9784
@davide9784 Жыл бұрын
Looks great, but to service the filter, I guess you've got to cut out the sealant & re-seal it each time?
@joeblack007
@joeblack007 Жыл бұрын
How often do you service the filter? Once a year, if that is not going to kill him. You have people installing their stock cats every year just to pass inspection.
@Top-G35
@Top-G35 3 жыл бұрын
Don’t let the negative Nancy’s get to you, far more people are influenced by you and your positivity
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Thank you man and i was positive that their thoughts of how I didn’t wouldn’t bother me 👌🏻 so no worries all positivity here haha 😁
@the_Real_R3x
@the_Real_R3x 3 жыл бұрын
Excellent work. 1 thing I would change and give me your feedback if you think it's a good idea or not, you can buy thin rubber edge seal to finish off those edges and clean them up a but more.
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Yes i didn't have any or i would have done that. We had the same idea for sure.
@rodelgarcia1847
@rodelgarcia1847 3 жыл бұрын
Cool & very inexpensive idea!Great job!
@spannersautoandcomputerser1649
@spannersautoandcomputerser1649 Ай бұрын
Did you measure the IATs before and after? That would be a good test.
@mattstarnes2006
@mattstarnes2006 3 жыл бұрын
That's purdy cool , I'll have to see if I can do something like then when my cars done
@mickeyminaj7296
@mickeyminaj7296 3 жыл бұрын
Man you're at it again.
@elgringojosh825
@elgringojosh825 2 жыл бұрын
I'm here looking for ideas for my lb7 duramax. I'll probably do something like this. Thanks for sharing 👍
@msalamlaham7129
@msalamlaham7129 3 жыл бұрын
Great work and smart idea! 👏
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Thank you.
@Top-G35
@Top-G35 3 жыл бұрын
You did a great job bro
@sidneyallman4409
@sidneyallman4409 3 жыл бұрын
Nice. When you gonna do a video with some pulls?
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
I can't hook up so its kinda pointless right now. It just spins forever. Gotta get tires that hook.
@sidneyallman4409
@sidneyallman4409 3 жыл бұрын
O gotcha i have a 05 tl really wanna do similar build. I really wanna see your car do some pulls cant wait till you get some tires. Great job on your build man
@hondatriple6
@hondatriple6 3 жыл бұрын
Great channel.. How is the air being scooped?
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
I did fail to mention that didn’t I. There is a induction hose that forces the air from the front bumper up and channels it
@hondatriple6
@hondatriple6 3 жыл бұрын
@@TexasHondaChannel that hose would be very informative. I figured the only way was through headlight. I have hose on RSX stock air box dangling into lower front bumper.
@MultiCristian102
@MultiCristian102 3 жыл бұрын
Looks good, I doubt it'll improve HP but it looks good.
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
It keeps intake temps lower if there is any gains it will be low numbers like 2-3whp the only way to really measure that is to simulate driving conditions on the Dyno with hood shut without the heat shield installed then do a pull. Then put the heat shield on and do the same exact test and see what numbers it says but i don’t wanna do all that to see a maybe 2hp gain. I can tell it has helped already though my intake temps aren’t as high as before when driving. I datalogged previous intake temps and they are significantly lower now :)
@IcyPwnage94
@IcyPwnage94 Жыл бұрын
Just came across this video and intend on doing this as a next weekend project for my Prelude. Your guide seems very straightforward to follow! Do you think it might be necessary to block off the area directly underneath the intake tube? Perhaps using a smaller separate piece of aluminum that would get bolted in before the intake is put into place?
@Fenix66687
@Fenix66687 3 жыл бұрын
little advise. put resin tube cut along around the filter area. engine moves and vibrates. so filter will be damaged most importantly filter holder
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Engine don't move anymore. Watch my latest dyno video but i did leave some small gap for the movement. These solid mounts don't let the engine move now though. Compare the latest dyno video to the previous you will see what i mean lol
@Fenix66687
@Fenix66687 3 жыл бұрын
@@TexasHondaChannel oh, ok. Fight back) it's going to seal it))) just kidding. It will be hard to seal it
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Yea for it to be 100% air tight seall all around i would have to make a box that just slides into the car as 1 unit then hook it up but yea i need to get some window sealer press it on around there to keep it from cutting into it. Either way so far its holding up and i put a good 60 miles on since i recorded this video :D
@GlassWerx
@GlassWerx 3 жыл бұрын
Looks good
@maxsocalangler
@maxsocalangler 3 жыл бұрын
Nice job bro , your creative AF 🤙Keep the J series content going!!! As a fellow J series Brother 😎
@theg-zguy5268
@theg-zguy5268 3 жыл бұрын
That's legit bro, nicely ✔👍
@mattohearn48
@mattohearn48 3 жыл бұрын
Whatever did happen to the supercharged pilot?
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
You must not have been watching all the videos. It happens hard to keep up with me some times. Sold it and did a video explaining my wife wanted a mdx. The deal was I supercharged the pilot and in exchange once I had my fun we sell it to get a mdx and we did just that. The new owners of the pilots love it and stay in contact with me.
@alexrios5390
@alexrios5390 3 жыл бұрын
That was a nice job bro //👍
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Thanks 👍 appreciate it.
@f.o.e.garage9336
@f.o.e.garage9336 3 жыл бұрын
Looks good. Seem fullproof. No crit just congrats.
@chrisrobles2012
@chrisrobles2012 3 жыл бұрын
7:00 I was thinking that Tavarish uses a lot of gold tape on the Lamborghini! Lol J/k
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
This gold tape works great i have used it a lot in the past to keep my a/c system cooler when i was turbo.
@lazarodelgado276
@lazarodelgado276 3 жыл бұрын
Awesome video. Are you planning on installing a tranny cooler and intercooler for the supercharger?
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
It’s a manual transmission so no transmission cooler is needed. The intercooler isn’t a option for this supercharged setup. If it gets anything it will be water meth injection to keep intake temps down.
@lazarodelgado276
@lazarodelgado276 3 жыл бұрын
@@TexasHondaChannel you are right, MT, I forgot. It'll be super interesting to see the water meth cooling for intake. Thanks, you are doing awesome 👍🏻
@Rich-cp4wo
@Rich-cp4wo 3 жыл бұрын
I like it dude
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Thank you
@bobo5150
@bobo5150 3 жыл бұрын
Gold member.
@harsha3588
@harsha3588 4 ай бұрын
Bro but hot air will go from down side 😢😂 Your just covered it from the top
@Life2DamEZY
@Life2DamEZY 3 жыл бұрын
WORK ON MY CAR PLEASE 😩 6MT Red a spec, Dallas TX
@TexasHondaChannel
@TexasHondaChannel 3 жыл бұрын
Nice and i don't do don't work for others. I don't have a "business license" and honestly don't wanna work on others cars right now. I barley have time as it is to be a father of 4 a husband a you tuber for this channel, Moore motorsports channel and agn tuning channel. I could recommend AGN Tuning in Killeen Texas for work he does solid work for sure. Also i don't have a shop or a place to work on anyone car.Im not giving my address out to random people that's for sure.
@taylorgray7300
@taylorgray7300 2 жыл бұрын
joker1014
STAY COOL!! HOW TO MAKE A DIY HEAT SHIELD
16:01
GARAGE THINGS
Рет қаралды 137 М.
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 120 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
BUILD CUSTOM 5"-4" AIRBOX - LSA COLORADO Ep. #6
16:02
Built for OZ
Рет қаралды 24 М.
How I Supercharged My 06 Acura TL Using A Comptech Supercharger
18:29
Texas Honda Channel
Рет қаралды 197 М.
How To Make Your Own Air Box | How To
7:25
Project B
Рет қаралды 18 М.
Heat Wrapping the Intake, Does it Work?
6:59
SchrödingerA2
Рет қаралды 518
10 Install Tips for J-Pipes on Honda-Acura V6 Cars
16:18
Heeltoe
Рет қаралды 15 М.
HOW TO K SWAP A EM2 PT 3- GETTING IT RUNNING! KPRO, VSS/CSS WIRING.
18:51
Texas Honda Channel
Рет қаралды 7 М.
How To Build Custom Heat Shields | Keep Critical Parts Cool!
4:44
CashedOutCars
Рет қаралды 15 М.
Gold Intake Wrap - Does it Work???
10:20
The Carizon
Рет қаралды 76 М.
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 120 МЛН