How to Make a Extremely Complex Heat Transfer Design ( 7 Different HTV's)

99% of the vinyl I use on my channel is Specialty Materials Brands I have tried many kinds over the years, and they are my absolute favorite. The quality is top-notch, I have a video where I wash a shirt 50 times, and the vinyl still looks brand new. • Thermoflex vs. Siser: ... They have the most extensive range of products and colors around ( there are over 90 colors in the ThermoFlex Plus and GlitterFlex Ultra lines alone). They also offer free product samples on their website, which you don’t see anymore. Trust me, request a sample because if you try it, you will know why I love it.
Request a Free Sample:
specialtymaterials.com/reques...
Specialty Materials :
specialtymaterials.com
* I DO GET FREE PRODUCTS TO TEST SPECIALTY MATERIALS TO TEST, BUT I STILL PURCHASE 95% OF MY VINYL. I WILL ALWAYS TELL YOU WHAT YOU GET FOR FREE. *
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Affiliate Links (I Earn a Small Commission if You Use Them) :
My Amazon Store (Has most of the things I use unless I state otherwise) :
www.amazon.com/shop/betsygotcher
Vinyl, Heat Press, and Cutters :
Non-Affiliated Links:
HeatTransferVinyl.com (carries all Specialty Materials Products):
www.heattransfervinyl.com/
Affiliate Links (I Earn a Small Commission if You Use Them) :
Heat Press Nation :
shrsl.com/3t4xq
15x15 Heat Presses:
shrsl.com/3t4up
16x20 Heat Presses:
shrsl.com/3t4vb
shareasale.com/r.cfm?b=113707...
Cricut:
cricut.pxf.io/5bEr9b
Sublimation Blanks and Supplies:
Links (I Earn a Small Commission if You Use Them) :
Conde: Use Code: CPN-CCV22 $5 off $50 purchase:
shrsl.com/3mxhs
Koala Sublimation Paper: Use Code: Betsy15 to Save 15%
shrsl.com/3mxhk
Design Software and Commercial Use Fonts and Graphics:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Creative Fabrica:
www.creativefabrica.com/ref/1...
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Screen Printing:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Ikonart Smart Screen Stencil: Use Code: CuttinCorners for 15% off
ikonartstencil.com
Find me on social media:
Instagram: / cuttincornersvinyl
Facebook: cuttincorners
Cuttin Corners Group on Facebook: / cuttincorners
Betsy's Bees (a fun place to hang out and share your crafts): / 260612806191309
I can't thank y'all enough for sticking by me through hurricanes and health issues, and everything in between. It means the world to me all the love and support that I have received throughout the years.
XOXO,
Betsy
Specialty Materials, #cuttincornersvinyl, Heat press Nation, Cuttin Corners Vinyl, heat press nation 16x20 signature series

[@CuttinCornersVinyl]

You can find the SVG here on my Patreon Page : www.patreon.com/posts/pin-up-skull-svg-72155156?Link&

[@ljcl1859]

I love layering tutorials. It is still something I struggle with. So I like to watch as many of them as possible (on your channel) I rewatch old videos too.

[@kms5306]

I absolutely LOVE this design....I finished four of them yesterday. I’m wearing mine today; I made my pinup with Pink hair for October and have gotten dozens of compliments already. Thank you for the perfect instructions!

[@picknbeansmamma]

I absolutely love your channel!! Others just zoom through the process...you show us step by step & actually talk to us! 💕

[@williamtait7808]

That looks really good I never thought you could do such work with vinyl thankyou for you new ideas I'll try lol to start doing what you've shown me

[@indigenousinkbeads2023]

Om’gee 😱 Thanks for sharing, I always wanted to start layering vinyl but always felt intimidated but you made it feel less complicated especially with all them layers & always wondering how to get everything to one color! Thanks again makes me wanna try now & that design tho ❤️🌹

[@Kpmomof4]

Soooo cute! Can’t wait for craftsmas!

[@kellywyant2644]

That’s is awesome love the colors! Love watching your videos!💕

[@CuttinCornersVinyl]

Thank you

[@ritchieakinzz1782]

Seeing you do 7 colours has acc inspired me to start using my cricut to its full potential! thank you for this video!!

[@robinhanff4248]

So cute!! Looks great!!

[@charlottehiggins5782]

What a cute design. Love it.

[@CuttinCornersVinyl]

Thank you

[@AussieMumVLOGS]

Wow!! You're so calm! I'm so new and have only done text and I sweat so much from stress hahah. I've never layered anything before. I hope u do more layering shirt tutorials. I like making shirts for my kids and husband

[@LVXMagick]

You are so awesome!! I hope one day I learn enough to be half this good. Thanks for all the help and knowledge. 🙏

[@ljcl1859]

That shirt came out awesome!

[@ashleywillers]

I love this so much! It's perfect!

[@CuttinCornersVinyl]

Thank you

[@leehubbell9636]

I love that design!!!

[@cherylwheeler6087]

So stinking adorable!!!

[@abhinav6083]

Thanks you so much for the information. Loved your work. I'm about to start my own small side business too. Your information helped. Cheers. Ps- awesome work.

[@mitchellfarmandapiary]

This is so awesome!

[@CuttinCornersVinyl]

Thank you

[@marymcsherry7432]

That is stinking adorable 😍

[@vee5194]

Love it!!

[@tracycooke8706]

Super cute!

[@SmittenKitten.]

This is CRAZY CUTE!!! Omg!

[@Truecrimequeen68]

I love it. Hello from So Cal

[@notyours3760]

Great job!!!

[@CuttinCornersVinyl]

Thank you

[@maryjanewill3056]

Great one!

[@CuttinCornersVinyl]

Thank you

[@kms5306]

OMGOSH!! That is so cute! Y’all you & Nadia?) did an awesome job with the design. I LOVE all the HTV you selected! I have GOT to become. a Patreon SOON! Maybe Santa will stop by Cuttin Corners early for me.... Ive been a very good girl this year!

[@CuttinCornersVinyl]

😂😂😂

[@BeatByMars]

Iove it!!!

[@Cristyb1978]

Amazing what you do here by the way!!! I notice you took the glasses off before pressing, is this cause it is a special vinyl? What can I use if I do not have a teflon sheet???

[@carmenaviles779]

First time watching the video and I love it. A question, when you heat the htv vinyl does the fabric of the shirt has to see through the vinyl? Thanks

[@louismoffett3571]

Awesome!

[@chelseadupuis7484]

thats a cool shirts let go big purple

[@CuttinCornersVinyl]

💜💜💜

[@kelivega3506]

Omg I love this just ordered the kit to make for my daughter ans myself. What color shirts do you think this design would look good on? And can you use the cricut easy press to heat on shirts?

[@karlacano9173]

Hermoso 😍

[@mothman4676]

Thank you soooo much. I cobbled together a design that has a 2 color background with a white layer connecting the colors and bordering the whole design. (kind of like a Pepsi logo with a thin white border) I cut 3 it in separate pieces. If I have any shrink it ruins the decal

[@CuttinCornersVinyl]

You can always add more outline to help with that as well.

[@ShellingzGod]

Great job

[@CuttinCornersVinyl]

Thank y’all

[@ShellingzGod]

@@CuttinCornersVinyl blessings 🙏

[@BUZZYBUZZIE]

Classic 👌

[@georgia2015]

Awesome

[@LOVESTOWRITEKID24]

do you think u can make this on a brother scan& cut sdx 125E cuz i have cricuts but im lookin2 purchase 1

[@cassysoto5543]

What kind of material do you use/put between the vinyl and heat press?

[@Kyle_Hubbard]

I don't know why I'm watching this because I'm unlikely to ever do it myself but I have to say that design is really fucking cool, I actually like it a lot I won't lie.

[@jasminamaya1328]

Do you have to have a membership to have those type of tools ? I don’t have those those type of tools it never pops up for me

[@stickemup1]

Love the shirt super cool , would it not be easier to mirror the whole design to start with ? Just incase you forget to mirror one piece , also does cricut not have a function to click the top layer then press shift on the bottom layer to highlight them all ? And then can shift and click extra layers of needed , I've not worked with cricut but watching the videos the process does put me off as it's so long winded as opposed to other softwares

[@CuttinCornersVinyl]

I can be long winded but it works well

[@palillom1]

I did one like that two years ago but only with layers it look good but it felt I had paper plate

[@Missy-Leigh]

Did she say which setting she used to cut the chameleon and glitter?

[@TheShotgunning]

How long did it take you to cut and press in total

[@sandreawhite7534]

Excellent. How do you know what’s goes down first and then what goes next?

[@CuttinCornersVinyl]

other than manufacturer saying what vinyls can be layered, practice after a while you start to figure what works best in what order

[@sandreawhite7534]

I’m starting to love layering but I’ve made mistakes. Especially with the temperature. Your video explained what I did wrong. Just a few seconds on each layer so I don’t melt it. I was leaving heat on too long. I have learned from my mistakes. I love your videos so much. I always learn something new.

[@brittanyquinn1]

when i go to upload my image it wants me to either do a cut or print and cut i cant just make that image stay in my design space

[@monicahenrion1559]

I just bought the skull pin up svg on your website. Was curious if I'd be able to download and cut it on my cricut using my phone. It worked! I am beyond thrilled. This is something I can use to put on shirts to sell? I just want to make sure.

[@CuttinCornersVinyl]

Yes it is

[@monicahenrion1559]

@@CuttinCornersVinyl Thank you for answering my question so quickly.

[@behindtheseeyesiseewhatyou8953]

Question… Layering so many colors makes the shirt feel like your wearing a bullet proof jacket. Why not break it down so all is once later. Like puzzle pieces.😊

[@Crissyjswayvlogs]

I'm trying to figure out how to make a design with multiple colors like this but in bulk. To where it's already in template format and all you gotta do is press it

[@CuttinCornersVinyl]

that you make yourself or you order ? if you order your best bet is screen printed transfers.

[@floratomo]

wow, I have to work with this specifically canvas program or I can do the same on Illustrator? why did you separed all layers if only two elements were press in another htv texture apparently? I m so curious!!

[@CuttinCornersVinyl]

Huh?

[@ichijokirosaki6618]

Kinda want to get started as a hobby I found a great heat press but what else do I need? For example how did you print your design on to the vinyl? Is it a special type of laser printer or something? I know that the color rolls of vinyl are on Amazon but still don't know how a design goes from the computer to being printed to they vinyl to get sublimated by the heat press machine. Thanks.

[@liliasheart]

She uses a Cricut Gluck with the hobby)

[@Michelle_Scott.]

I love that, but why was it that you placed the sun glasses on the glitter vinyl??

[@CuttinCornersVinyl]

The outside of the sunglasses is glitter

[@fitthedescription3490]

@@CuttinCornersVinyl i think she's asking why you made glitter sun glasses

[@cherimccain12]

It takes out the extra press step. They're not on top of each other so can be pressed together. I found it fascinating that she could take one off it's original carrier sheet and placed it on the other sheet. Curious as to how she could do that as usually the inside of the glasses would've been cut out on my maker.

[@justmyluck751]

This only works with noncricut htv right? If the vinyl on Cricut not heated long enough it comes up right?

[@CuttinCornersVinyl]

You can use whatever vinyl you like. If not applied properly is will come up.

[@kemy6775]

I try to do designs like this but for some reason the vinyl shrinks and never lines up right with the rest of the pieces.

[@CuttinCornersVinyl]

Time and temperatures matter for layering

[@geeman8151]

The key is to tack it for 1-2 secs, hot peel and repeat. I've only used easy weed. When you press with the suggested heat you shrink the material and shirt. Took me along time to find this out.

[@hazmel]

What’s that brown piece called you put on everything every time you close your press?

[@CuttinCornersVinyl]

A Teflon sheet

[@JohnDrach]

How many washes can you get out of heat press vinyl?

[@CuttinCornersVinyl]

I have shirts with 100 hundreds . I have a video showing what specialty materials thermoflex plus looks like after 50 washes

[@yunggrip9988]

👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾

[@kevinmott7945]

Bless ur loveliness ur so beautiful 😍 💓 💗 💖 💛 💕 😍

[@dianne20010]

Where can I find the design and the vinyl

[@CuttinCornersVinyl]

I have the design on patreon and the vinyl is by specialty materials

[@shaunamiller2065]

What kind of press are you using?

[@CuttinCornersVinyl]

This is a hottronix air fusion but any kind will work. Right now I’m using a heat press nation craft pro 15x15

[@breanabroussard25]

I graduated from Nederland High! ✨

[@mialopez6474]

What paper you use to cover it from burning

[@CuttinCornersVinyl]

A Teflon sheet we have them on our website www.Cuttincornersvinyl.com

[@nicolekopitzke1313]

i would love to Purchas this image from you. how do i get it?

[@CuttinCornersVinyl]

❤️ I hope you love the file

[@RainRay1]

whats the brown thing you were using called? i've always seen people use parchment paper

[@CuttinCornersVinyl]

It’s a Teflon sheet. It’s completely reusable.

[@RainRay1]

@@CuttinCornersVinyl can I purchase it on Amazon? I can use this for any type of pressing?

[@CuttinCornersVinyl]

@@RainRay1 yes, I think my Amazon store is linked in the description and I have them in the heat transfer vinyl list

[@RainRay1]

@@CuttinCornersVinyl found it thank you

[@babyonboardreminder4791]

did you layer vinyl on top of vinyl ?

[@amietruett1387]

You can layer vinyl on vinyl and glitter over vinyl. Just don’t recommend putting vinyl over glitter.

[@lifewithdari1357]

How do u keep your different colors when selecting a cut image & not a print then cut ? I’m confused

[@CuttinCornersVinyl]

What do you mean? I send the svg as a cut image THE Complete Guide to Layering HTV : Everything You Need To Know kzbin.info/www/bejne/h5q3iIqfbbN1n68 this shows you more about it.

[@lifewithdari1357]

@@CuttinCornersVinyl I’m attempting to do my own image, not yours, but when I upload the image i can only choose a block cut image (all black) or a print to cut image which means use a printer.

[@CuttinCornersVinyl]

@@lifewithdari1357 so you are uploading either a png or jpeg and that will have to be converted

[@cierranunez3]

Is this still available

[@CuttinCornersVinyl]

We have the file still on our Patreon page

[@spottrader5406]

your cute!

[@dawnnelson7651]

I think a fall flag would be great.

[@CuttinCornersVinyl]

It will be

[@tankscrittersandurbanhomes5579]

Just checking, but, your 5-7 seconds is actually 2-4. Clearly your 2-4 works fine, but would a true 5-7 be better for a beginner?

[@CuttinCornersVinyl]

5-7 is best this has a solid black background so you can get away with a little less but at noon today central standard time I have a new video coming out on layers and the technique is a game changer.

[@aprillynn1981]

For extra fun you could have done glow in the dark teeth lol

[@darlenevenus4398]

Can I buy theses designs if I am not a Patreon member.. I am on a fixed income and I cannot afford to be a Patreon but I would love some of the designs.

[@CuttinCornersVinyl]

They are on our website

[@yingyinghuang315]

So cool my beauty, We specialize in the production of lettering film and other accessories, such as a complete toolset, as well as sublimation pens, sublimation paper, Teflon, etc. If you are interested, we can cooperate and wait for your reply

[@kanestone4576]

Too much work , I don’t think you can make money from this but u can make beautiful t-shirts for loved ones

[@CuttinCornersVinyl]

When I did custom work like this I always looked at it like this, people could choose to pay me for what I was worth or get something simple from someone else. I did well. I stopped sell because of health. I’m still getting to create his on a smaller scale