The Ultimate HTV Hack | Cuttin Corners Vinyl

99% of the vinyl I use on my channel is Specialty Materials Brands I have tried many kinds over the years, and they are my absolute favorite. The quality is top-notch, I have a video where I wash a shirt 50 times, and the vinyl still looks brand new. • Thermoflex vs. Siser: ... They have the most extensive range of products and colors around ( there are over 90 colors in the ThermoFlex Plus and GlitterFlex Ultra lines alone). They also offer free product samples on their website, which you don’t see anymore. Trust me, request a sample because if you try it, you will know why I love it.
Request a Free Sample:
specialtymater...
Specialty Materials :
specialtymater...
I DO GET FREE PRODUCTS TO TEST SPECIALTY MATERIALS TO TEST, BUT I STILL PURCHASE 95% OF MY VINYL. I WILL ALWAYS TELL YOU WHAT YOU GET FOR FREE. *
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Affiliate Links (I Earn a Small Commission if You Use Them) :
My Amazon Store (Has most of the things I use unless I state otherwise) :
www.amazon.com...
Vinyl, Heat Press, and Cutters :
Non-Affiliated Links:
HeatTransferVinyl.com (carries all Specialty Materials Products):
www.heattransf...
Affiliate Links (I Earn a Small Commission if You Use Them) :
Heat Press Nation :
shrsl.com/3t4xq
15x15 Heat Presses:
shrsl.com/3t4up
16x20 Heat Presses:
shrsl.com/3t4vb
shareasale.com...
Cricut:
cricut.pxf.io/...
Sublimation Blanks and Supplies:
Links (I Earn a Small Commission if You Use Them) :
Conde: Use Code: CPN-CCV22 $5 off $50 purchase:
shrsl.com/3mxhs
Koala Sublimation Paper: Use Code: Betsy15 to Save 15%
shrsl.com/3mxhk
Design Software and Commercial Use Fonts and Graphics:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Creative Fabrica:
www.creativefa...
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Screen Printing:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Ikonart Smart Screen Stencil: Use Code: CuttinCorners for 15% off
ikonartstencil...
Find me on social media:
Instagram: / cuttincornersvinyl
Facebook: cuttincorners
Cuttin Corners Group on Facebook: / cuttincorners
Betsy's Bees (a fun place to hang out and share your crafts): / 260612806191309
I can't thank y'all enough for sticking by me through hurricanes and health issues, and everything in between. It means the world to me all the love and support that I have received throughout the years.
XOXO,
Betsy
Specialty Materials, #cuttincornersvinyl, Heat press Nation, Cuttin Corners Vinyl, heat press nation 16x20 signature series

[@kathyshorter8150]

What a good idea!!! Never ever thought about doing that. I have cut apart vinyl to fit the pieces together and never even thought about doing this. You are the BEST!!!! QUEEN BEE!!!!!

[@CuttinCornersVinyl]

Thank you 🐝

[@rpbvid]

@@CuttinCornersVinyl Way to go Betsy! I have not been on YT for a while but as always Your design skill is sharp, colorful and engaging. Keep shining, and May You and Your Family Be Blessed. Rose Brown

[@Trina7594]

Talented and gorgeous!!!! You are always right on time with your tutorials!!!

[@CuttinCornersVinyl]

Thank you

[@reneebanbury7066]

What a GREAT idea! I never even thought about it … so glad you did! Genius at work!

[@CuttinCornersVinyl]

Thank you

[@floralong4736]

Oh this is gorgeous. I love the colors. I struggle with making sure I have the right colors bc of my Mac deg. I love love this one. Thank u so much for sharing.

[@CuttinCornersVinyl]

❤️❤️❤️

[@grannysquareswagonwheels2604]

As soon as you said turn it inside out and grab a carrier sheet I immediately knew where you were going with this and all I could think of was BRILLIANT!

[@CuttinCornersVinyl]

I know right. I couldn’t believe I didn’t think about it sooner

[@johnbubu8310]

You have to know that your videos are very, very creative and helpful. This is one of the best Channels I have seen for crafts (and I have seen many) Never forget that you are extremely talented, very very likeable and everything you do is helping people like me to become more and more creative. Believe in yourself and do not lose hope. KZbin can get a bit disheartening at times. Keep on doing what you are doing because IT IS worth it. Many thanks for everythjng you share with us. It does not go unnoticed 😊

[@sallylong5908]

Great tip, Betsy! It's like using a removable stabilizer in embroidery - makes perfect sense!

[@CuttinCornersVinyl]

Thank you

[@ivamac9394]

I embroider and I am just now getting into HTV. Stabilizing knit, is a must in embroidery. This makes perfect sense. This method appears to be more cost efficient.

[@AussieMumVLOGS]

I think if you leave in the mistakes it makes it more real and shows us newbies that it happens to everyone!! I'm still watching hehe

[@tomikaheard1037]

I love the design, I really love to see how you create the layers.

[@CuttinCornersVinyl]

The problem is when I do these types of designs it literally takes me days. This took me 3 days. There isn’t a way for me to film and edit it.

[@garyjohnson6096]

This is the first time I've ever seen you and your channel but this is great.love this tip now I'm on to the next one thank you for sharing.

[@CuttinCornersVinyl]

Thank you

[@malva4838]

This is a hack video that actually has a hack! So impressive and so easy to incorporate. Love the design too. Thank you!

[@CuttinCornersVinyl]

Glad you like it!

[@nicholaslafferty3928]

This will definitely help me. I wonder if it's possible to reuse a sheet like a cricut mat with basting adhesive spray and cleaning it from time to time..

[@JulieL96]

It looks great! I think I just might be able to attempt something like that. Thank you.

[@CuttinCornersVinyl]

You can do it

[@robertavandervelde1142]

Happy to see you look like you are feeling better....Stay strong!

[@CuttinCornersVinyl]

Thank you

[@marymcsherry7432]

That was amazing 🤩 such a game changer. It is a gorgeous shirt Betsy 💜

[@CuttinCornersVinyl]

Thank you

[@Erica-BakingCutie]

That shirt is super cute! Thanks for the tip 😉

[@CuttinCornersVinyl]

Thank you

[@ljcl1859]

Ohhh..... Got it! I didn't understand what you were doing or why, until you spelled it out. Great idea, never would have occurred to me. Yay!!! Thanks, Betsy!

[@CuttinCornersVinyl]

Your welcome

[@swpa64blueeyes]

Wow , I really Love that design and how you layered it....You make it look so easy....Thank You for tutorial.

[@CuttinCornersVinyl]

You’re welcome 😊

[@debbiekey7707]

Just know I'm so grateful for you..I thank you for all you do

[@CuttinCornersVinyl]

Thank you

[@conifarrington2839]

I love everything you do!! But this is amazing 😻 I hope your health continues to get better and that they figure out your medication. God be with you praying that everything works out for you 💕🙏💕🙏 Thank you for continuing to make videos

[@CuttinCornersVinyl]

Awe thank you

[@bobslfcu773]

Awesome tip to put the adhesive inside the shirt when screen printing. I just did shirts for wedding anniversary next month, they came out really nice. Do you have any tips on how to line up multiple color screen prints? Thanx for the help.

[@sassyTK41517]

I'll definitely be trying this hack! Thank you. Btw, I LOVE your new hairstyle!!! 🤗🌹💖

[@CuttinCornersVinyl]

Thank you

[@reneepaiz9574]

Beautiful!!I feel guidelines should've been instilled/implemented with KZbin since day 1.I really really like the color shifting htv!

[@CuttinCornersVinyl]

💜💜💜

[@pamelapostell2047]

I love this. You did a good job!

[@valleyval7]

That came out amazing! Great job thanks for the tips! 😊

[@CuttinCornersVinyl]

Thank you

[@kingjeffishere]

wow, I feel when I can FINALLY get layered images like this down..I'll be unstoppable! Great vid! ;)

[@CuttinCornersVinyl]

Thank you

[@bernielove49]

Awesome great tip I will be using it thanks for sharing 😀🙌🏼

[@CuttinCornersVinyl]

It’s a game changer

[@lindalodovice6340]

Where on your patron page for size print out Love your videos I'm trying with a problem also so proud of you not quiting

[@CuttinCornersVinyl]

Thank you 🙏 www.patreon.com/posts/64979969

[@karen3490]

Thank you for this video. It gives me some confidence to start and use my heat press. It’s been in the box for over a month; never used. 😥😬

[@CuttinCornersVinyl]

Your welcome. This is why I love making videos

[@CuttinCornersVinyl]

Have you ever seen this technique done before? I just found out this channel Customz Journey had this idea first. Go give him some love. I definitely want to give credit where credit is due.kzbin.info/www/bejne/e6O1kJ5sZ8ioZ5o

[@maryjanewill3056]

No, it's great idea

[@floralong4736]

I had never seen this but am so thankful for u sharing this bc it is going to help me so much. Keep that light shining

[@malva4838]

No, I've never seen this. Can't wait to try! Thank you!

[@Lollietopreciouslittles]

Ok new here, what’s the hack. What did the carrier sheet do inside the shirt? I’m so lost lol and I see I’m alone in this.

[@CuttinCornersVinyl]

@@Lollietopreciouslittles it keeps the it from stretching when applying the colors and pulling off the carrier sheet on the outside. It’s just keeping the fabric in place.

[@amandaolaitan]

Such a great idea! The shirt came out beautiful 😍

[@CuttinCornersVinyl]

Thank you

[@justcraftingaround7467]

I wasn’t aware of your sickness. I am sorry 😢! I can relate. About 4 years ago I started to get swollen joints. Then my hands went numb. They hurt so bad. Then my eye sight went real fast all I could see was cloudy haze. Found out I have Behçet’s disease which’s cause uveitis which eventually causes blindness so I have to give up building furniture which is what my craft was. Now I am on medication and chemo. Which makes me sick most of the time. God bless you!

[@CuttinCornersVinyl]

Thank you. They are still trying to figure everything thing out with me. I’ll be praying for you.

[@kerrycanale9472]

genius,never seen it before an definitely will be doing it on my next layer shirt. Thank you

[@CuttinCornersVinyl]

Thank you

[@RachelNogly]

Your amazing and strong 💪 keep going!! ❤️ love your videos!

[@CuttinCornersVinyl]

Thank you!

[@veganlife78plants28]

first let me say THANK YOU for this file. Ya i been getting complements all day long,phone numbers because people want me to make them a shirt. This file is the Sh*t...lol yous a beast at what you do. Thank u again

[@CuttinCornersVinyl]

Thank you

[@movellycody3144]

This is Awesome, where have you been!!! I'm so glad I've discovered your channel.I just ruined 2 shirts just yesterday, I was so frustrated I gave up. I regrouped this morning and did some research and here you are😍!! I have a question you may have already answered but what materials or how are you covering the top portion of your heat press?

[@CuttinCornersVinyl]

Its a Teflon cover it’s from Amazon. I have it linked in my Amazon store in my description box

[@joyweber4659]

Beautiful! Thank you Betsy,

[@CuttinCornersVinyl]

Thank you

[@shirleymonistere4729]

Can you do a tutorial on how you made each layer on cricut plz

[@CuttinCornersVinyl]

this wasn't made on the cricut. I made it in corel draw.

[@jeepgirl1224]

Dog hair means there is love in your house💕 where did u get the Teflon wrap the bottom of your

[@CuttinCornersVinyl]

Amazon it’s linked In my Amazon store in my description box

[@ellengiglia9826]

Thanks for this hack. It makes so much sense.

[@CuttinCornersVinyl]

Thank you

[@kimberlygarrett5385]

Pretty clever! Thanks for sharing!

[@CuttinCornersVinyl]

Thank you

[@purpledragonco6551]

Great video. Love this design. I downloaded this svg off your site to use but I can't get the 3 separate cuts (white, black, yellow) so that I can layer them. If you can and don't mind, please tell me how you separated them.

[@CuttinCornersVinyl]

did you download the svg or the png? and what program are you using?

[@CuttinCornersVinyl]

Also, if you email me @ [e-mail] or send me a message on patreon I can walk you through it easier

[@purpledragonco6551]

@@CuttinCornersVinyl svg w/o the red background. Cricut

[@purpledragonco6551]

@@CuttinCornersVinyl I also have a silhouette cameo 4

[@CuttinCornersVinyl]

You just ungroup them. Then if you want to keep the pieces together ( some people don’t) I either weld or group by color. Then I delete the red background.

[@vee5194]

Great hack!! Love the design

[@CuttinCornersVinyl]

Thank you

[@stephanieknight5374]

Great video! I've been struggling with different HTVs lately. Our local retailer only uses the Siser products. What is the name of the HTV you were referring to? Tia 😊

[@CuttinCornersVinyl]

Specialty materials. I have a link in the description to get samples.

[@kadengotcher1448]

Absolutely stunning

[@CuttinCornersVinyl]

❤️

[@BestyetJourney]

Despite how you talked about yourself I myself would have never known.. I love everything about this content and you xoxo

[@CuttinCornersVinyl]

Thank you

[@gretacosby8005]

That is Beautiful! Where did you get the SVG? ❤😍

[@CuttinCornersVinyl]

I made it www.patreon.com/posts/she-works-hard-65613806?

[@gretacosby8005]

Thank you so much! Blessings 🙏🏼😍❤

[@teresaconner5643]

What a great tip. I’m like you why haven’t we thought about this before. ❤️❤️

[@CuttinCornersVinyl]

😂😂😂I know right?

[@catbenjamin5838]

You are beautiful inside and out. Continue be strong and thank you. Xoxo

[@CuttinCornersVinyl]

Thank you 😊

[@donnaproudfoot8284]

This such a great idea!! Thanks🐝

[@CuttinCornersVinyl]

❤️❤️❤️

[@marney68papua]

Can i use cotton tshirt to do this

[@ms.tgrayson5826]

Thank you for sharing. Also I bought your T-shirt tool. Can you direct me to your video on how to correctly use it.

[@CuttinCornersVinyl]

The Best T-Shirt Ruler | I Might Be Biased kzbin.info/www/bejne/p5maiGZ8hZuepcU

[@ms.tgrayson5826]

Thank you

[@jasminejohnson2678]

I’m from Beaumont! Your so bomb. Would love classes in person! I’ve been watching binge watching your videos!

[@CuttinCornersVinyl]

Maybe if my health continues to improve. I loved doing classes

[@bustacutxl2784]

Great video and I love that lettering. look sweet as honey

[@becbbasementeditionclothin1062]

Hello love your tutorial.. what is the name of your font and where can I get it .. thank you

[@CuttinCornersVinyl]

I’m not sure . I have about 5000 fonts on my computer and I’ve already converted it to curves but it probably came from creative fabrica . I have a link in the description box or 1001 free fonts.

[@paulettehunter1052]

Beautiful What font did you use

[@CuttinCornersVinyl]

I’m not sure I’ve already converted it to curves I have a ton of fonts on my computer. The file is free on my Patreon page. The link is in my description box

[@paulettehunter1052]

@@CuttinCornersVinyl thank you

[@marney68papua]

Pray your well

[@caroltrimble2738]

Thank you

[@CuttinCornersVinyl]

❤️

[@jennnca]

I need to ask about the shelf behind you!! Is it ikea?

[@CuttinCornersVinyl]

It is but my husband built the top section.

[@tensionbegonebybunny3093]

Can we use parchment paper as a replacement?

[@CuttinCornersVinyl]

You can but a Teflon sheet will last forever. You don’t need more than one

[@marybraunlich]

What is the cooling tool from Amazon you mentioned?

[@CuttinCornersVinyl]

It helps cool the vinyl faster amzn.to/3vvPzKF

[@dottyearnhardt9600]

Great job,

[@CuttinCornersVinyl]

Thank you

[@bridgetgainous5487]

I wonder if this will help with ghosting when sublimation? Thank you for sharing.

[@CuttinCornersVinyl]

It could help

[@gretchencazares7067]

I love your videos.

[@CuttinCornersVinyl]

Thank you

[@theresanowell7554]

What is the name of the font that you used

[@CuttinCornersVinyl]

I’m not sure I’ve already converted to curves and I have so many on my computer. This file is free on my Patreon page though

[@chelseymoore6975]

What’s the font for that

[@CuttinCornersVinyl]

I don't remember I converted it to curves already

[@maryjanewill3056]

Love it!

[@CuttinCornersVinyl]

Thank you

[@ericcox4448]

Nice work. New to the channel.

[@CuttinCornersVinyl]

Thank you

[@maryjanewill3056]

I haven't seen it before.

[@CuttinCornersVinyl]

I haven’t either

[@crystalthomas6801]

What font is this? How do you achieve this font?

[@CuttinCornersVinyl]

I’m not sure I already converted it but to curves

[@CuttinCornersVinyl]

It probably came from creative fabrica I have the link in my description box

[@KiddiECuLDeSaC]

good hack

[@CuttinCornersVinyl]

Thank you

[@evepeterson9210]

What is this font?

[@CuttinCornersVinyl]

I’m not sure I’ve converted it to curves and I have so many. I’m sorry

[@HeatherHunterJ]

LOVE this 🐝💪🙏💘🙋‍♀️

[@CuttinCornersVinyl]

🐝❤️🌻

[@peachezhigh5895]

Customz Journey did a video like this about 7 months ago... Please give credit where credit is due

[@CuttinCornersVinyl]

Thank you for sharing. Do you have a channel link? I tried to search but I get lots of car videos. When I had the idea I did search for videos and I didn’t find anything I also stated in this video that if you have seen please let me know. I’m not trying to steal anyones videos.

[@IAmFirstGear]

you like jazz

[@CuttinCornersVinyl]

🐝🐝🐝

[@purpleheart1836]

My issue is the vinyl shrinking which I can’t stand….would this process help?

[@CuttinCornersVinyl]

I think what you are seeing is the shirt stretching. This will help with that. If your still having issues you may need to add an outline or offset.

[@MileyonDisney]

c o o l

[@chenateazwhite6969]

I don't like videos that don't show step by step

[@CuttinCornersVinyl]

What do you mean? This shows step by step of the application.