How To Make A Floating Acrylic Frame

These simple floating frame are chic and MUCH more inexpensive than the standard acrylic floating frames. Find out how I made these for our master bedroom with spending a fortune. See my full blog post for links and further explanation! atcharlottesho...
Join the chaos!
www.atcharlott...
/ atcharlotteshouse.com
/ atcshouse
/ atcharlotteshouse
/ atcshouse

[@starspace4529]

How you stick the picture onto the acrylic sheet? chewing gum?

[@crypto1633]

Just a drilling tip for anyone drilling thru this material drill speed is a major factor faster is not better like she is doing a slow speed is better with light pressure the drill bit will do the work if you go really fast it will cause melting and smell so slow and light-medium pressure is best.

[@milliepadron1708]

What thickness should the acrylic sheet be? And what size should the standoff hardware be?

[@elijahragland8498]

its better to use a dremel, and acrylic bit, or a counter sink. acrylic sheets are too freakin expensive to play with fire like that, especially if you've got a ton of pieces to frame.

[@kimoshicraft5666]

OMG your poor lungs. You should be wearing a really good mask.

[@phrozencrew2494]

or just buy an acrylic drill bit for less than $2

[@cosmicfxx]

Hi, what kind of drill bit ideally... wood or metal drill bit? TIA

[@deezler]

your drill is spinning the wrong direction. making a hole should take less than a second.

[@Samuelfish2k]

It’s not spinning in the wrong direction.

[@amandafurr2446]

Hi Charlotte, Can you tell me how you had the pictures stick to the acrylic and a link to your standoff screws? Thank you this tutorial is great!

[@AtCharlottesHouse]

Hi Amanda! I just updated the video description to include my blog post... links are there with all supplies. Thanks for pointing that out! Here are the stand off mounts I used: amzn.to/2s5pGmh I and adhered the maps with those little clear glue dots right onto the frame and the map itself. The glue dots won't easily come off the artwork so consider a neat clear piece of tape along to back of the artwork onto the frame as an alternative!

[@boyshanks]

@@AtCharlottesHouse This was VERY helpful. I really appreciate your video and blog. Keep up the good work.

[@AtCharlottesHouse]

@@boyshanks THanks so much! I appreciate it!!

[@AtCharlottesHouse]

@@boyshanks Thanks so much!!

[@Hhhhhgggihgdd]

What do you have on the backside of your pictures ? Another piece of plexiglass ?

[@crystalmarshall6127]

What drill bit size and screw size did you use

[@AtCharlottesHouse]

I used a drill bit large enough to accommodate the screw of the standoff mount. So it depends...

[@yurakovalec7292]

Make it wooden with the help of the Woodglut instructions.

[@jacqbx]

Thanks!

[@NorCal7477]

Nice job

[@princessmahv1]

Thanks for this! Doing this very soon!!

[@AtCharlottesHouse]

Oh, great! GOod luck!

[@ryandinhotenacious3999]

Metal bit would work best

[@onethousandwords]

Thanks for showing that detail on how the standoff screws work. What thickness of plexi are you using (it looks a little thin, is it because you can only fit so much in the spacer)? An alternative option I found (but haven't tried yet) is an "edge grip" standoff screw. With those, you wouldn't even need to drill holes into the acrylic panels. It's meant for acrylic block signs (like you see outside office doors in glass-door buildings), but if you had some thicker acrylic, I bet it could be tightened just enough to slide out and change out the artwork inside without taking it all apart... for instance if you were displaying children's artwork or doing a seasonal rotation of your walls!

[@AtCharlottesHouse]

I LOVE That idea! They sound perfect! You're right, this plexi is pretty thin... for those four large pieces, it gets expensive FAST! I'd LOVE to have thicker acrylic up there... one day! :)

[@Tajrin1290]

How do you stick it to the wall

[@AtCharlottesHouse]

You use standoff mounts as shown.

[@garywatson8602]

Drilling that Acrylic With a big bit is about as wrong as you can get , Acrylic cracks that way,. Start with a small bit and work your way up from there ,. All the Experts tell you this you must have missed it

[@ibkizzle]

how much was this project?

[@AtCharlottesHouse]

It depends on the size of the acrylic. I believe this larger size is $15 a sheet so for four frames it was $60 plus the cost of hardware so maybe $70?

[@ruseventyfour2948]

Please we need more details.. what is the exact thickness of the acrylic you bought? What was the sheet size and cost? Can you link to the product at lowes? Is there any claims about UV protection? All acrylics are better at protecting than glass but some acrylics are better than others. Thank you for posting the video but ultimately you did this either for views or to genuinely help people.. you will do both with more info.

[@benlikebike]

Regular old drill bit. Thanks lady. Useless.

[@sgalien6661]

Total crap, all about drilling!