HOW TO MAKE A GRAPHIC TEE WITH THE DTF SUBLIMATION HACK | SUBLIMATION ON 100% COTTON

[@marlettamcclain1950]

I think Porcha did a great job with her tutorial. The negative comments are BS. The hack works IF done correctly. You’re gonna make a mistake or two as you’re learning a new process. If you’re not sure about a technique then practice on fabric rather than t-shirts.

[@ColorMePorcha]

Thanks Marletta!

[@laurie4]

Good, easy to follow video. It’s short and to the point! Most people talk forever to get to the point 🤣🤦‍♀️. Thank you so much and your product is darling!!

20 years in the nail business, yours are beautiful, now I'm starting a new business and look forward to all the advice ,thanks a lot , greetings from Croatia(Eu)

[@ColorMePorcha]

Heeeeey! Best wishes ✨️

@@ColorMePorcha I was thinking about your nails, yours are beautiful. even though I don't do them, I have working girls in the salon who do it, I can always recognize beautiful nails . Thanks in advance

[@dcphoto7productions]

I tried everything to get the paper to go through my printer and nothing worked until I tried your way. Thank you so much for making this video :)

[@ColorMePorcha]

Glad it helped!

[@ask4deville]

This is beautiful. The best I've seen in Sublimation DTF hacks yet. Thank you!

[@ColorMePorcha]

Thank you, I appreciate your feedback!

[@christini2828]

Love it! Great tutorial. I just bought a manual heat press. This helps if I want to make my own designs.

[@BlueLotus726]

Love THE idea of the shaker thank you for sharing 💙

[@ColorMePorcha]

You're welcome!

[@BlueLotus726]

@@ColorMePorcha 💙

[@graphx88]

What temperature of the heatpress when you cure it for 90seconds?

[@sunniesyde6132]

Hi Porcha, I have just tried your DTF Sublimation Hack and it worked a treat. Thank you so much 😘

[@ColorMePorcha]

You're welcome 😊

[@debby6679]

I love your videos!!! You have made everything so easy to follow. Thank you so very much.😊

[@becomingdryork2919]

Hey Sis! I love this-those colors are poppin! I forgot I have the dtf hack kit- gotta try it tomorrow

[@ColorMePorcha]

Heeeey hun! The process is so easy, I hope you do try it, best wishes ✨️

[@hollisrichardson-barajas1247]

Thank you Porcha for all the great information and the tutorial. I am just getting started and all your information was very helpful especially the information with WORD. I will definitely return for more content.

[@ColorMePorcha]

You are so welcome!

[@BOTG_Adventures]

How do you stop the blacks dots that appeared on the print?

[@luv2sew247]

Hi Porcha, I am so glad I found you. You did such a wonderful demonstration and I will be purchasing some DTF powder to try it out very soon. I wish KZbin would add the share images feature so that I can show you the finished product. Have a great day.

[@ColorMePorcha]

Thanks, best wishes ✨️

[@michele13447]

hi what do i do when my prints comes out with roller strikes from the image ink

[@brendalva_11]

This looks beautiful!! I love it💜 how does the sublimation ink do with DTF hack when washed? I know pigment ink does very well.

[@barbra429]

I'm going through the comments trying to find the answer to this question.

[@zarasjourney6627]

Thanks for the video. Silly question, did you put the tape on the glossy side as not to touch the ink?

[@ColorMePorcha]

Not a silly question, but yes that's the reason

[@fabygarcia5688]

HI, I loved it, thanks for sharing, I have a question, can I put the heat press on the image to cure?

[@ColorMePorcha]

You're welcome! Putting the press directly in the image could ruin your design

[@melissahilliard2438]

Those colors are popping in about to start sublimation dtf also thanks for sharing

[@ColorMePorcha]

Best wishes ✨️

[@glitzandglammanhattan267]

What a great video! May I ask what sublimation printer and sublimation ink you are using? Thanks again posting such a helpful video!

[@HOOPSnCATS]

Hi Porcha!! I've been watching your videos for a little while now and I love them. they are very easy to understand and you get right to the point. and I have to say you are quite creative as I love the designs you create in Canva. I have a question for you - I converted my Epson printer to a sublimation printer. I noticed that your colors are incredibly vibrant and they pop! May I ask, do you have a converted printer or a printer for sublimation? If it is converted, would you share your printer settings or guide me to where I can find them? I even got the ICC code from Printers Jack (the ink I use), and my reds are still to orangy. I've tried everything....... I'm wondering if I need to bite the bullet and get a sublimation printer?......😝. TIA!!!😊

[@tia0908]

I have that kit but just haven't had a chance to anything with it yet. Hopefully this weekend. Those colors are popping!!

[@ColorMePorcha]

Best wishes ✨️

[@elsaestevistorres6452]

Looks great thanks can it also be used on black canvas shirts? Thank you

[@ColorMePorcha]

Thanks! No, I learned the hard way. This hack uses sublimation ink, which works best on white or light colors.

[@insanerecordsllc]

Great video thanks

[@mcrescoord]

Thanks for the video. I have white spots on some areas of my image. Any idea what that might be from? Thanks

[@ColorMePorcha]

I haven't come across that yet, but if you figure it out, let us know😆

[@mcrescoord]

Thanks! Will do@@ColorMePorcha

[@JPerryHexham]

Hi Portia could i do this on a pink shirt or would i need white htv behind it x

[@ColorMePorcha]

Yes, you could. Because we're using sublimation ink, the same rules apply. Sublimation Ink works best on white and next light colors. So a lighter pink should work.

[@jerimarcum8697]

Love your video! It's so easy to follow and understand, I am definitely trying this!

[@ColorMePorcha]

Best wishes ✨️

[@evelynsavage5330]

Hey!!! This is so pretty! How did you prevent the pizza wheel spots? I always get little dots from the wheels

[@MrsShenika]

You are such a good teacher and that shirt is too cute.

[@ColorMePorcha]

Thank you 💜

[@anthonymacaulay444]

Great, simple, practical and very informative video. Thumbs up Porcha 👍

[@ColorMePorcha]

Thanks Anthony!

[@Willo_1647]

Hi Porcha, I was always told not to use sub ink with dtf!! So glad you did this just to show it can be done 😊

[@ColorMePorcha]

Yes, best wishes!

[@bobslfcu773]

Nice video and a nice tip to put the tape on the film. I get black streaks on the film too many times, do you have any tips to keep that from happening? My printer only feeds from the front so that may be part of the problem. Thanx for the info.

[@scooby9165]

Thank you for the video, I ordered everything you suggested. I used your code too and Thank you for that. I will try everything next weekend.

[@ColorMePorcha]

Best wishes ✨

[@becomingdryork2919]

Sis!!! I finally did it successfully! Thanks for your guided help. Really appreciate you. I am totally hooked on this hack now lol

[@ColorMePorcha]

Love it! I'm so glad you worked it out 💜

[@rhondathomas6773]

I HAVE THE FILM AND POWDER, I HAVE TO TRY THIS OUT IF MY PRINTER ACT RIGHT.

[@NunyaBizniz-q8i]

What ICC profile are you using when printing please?

[@DeannaHorst-oz1qt]

After you printed from the sublimation printer, did you have to allow some time for it to dry after it was printed?

[@jamesharvey446]

I found a sugar glass sugar shaker at Dollar Tree for $1.25 it has larger holes and works well.

[@kingpreme6037]

Looks great, what temperature do you cure?

[@ColorMePorcha]

Thanks! 320° with the heat source as close as possible to the image

[@lroyallondon]

Hi there, love your shirt by the way, I'm quite new to this but I want to be able to create sublimation shirts and DTF shirts using this Hack, I was wondering would an Epson EcoTank ET-8550 be good to do this with and would i have to change the ink or can I use the same sublimation ink that comes with it?

[@ColorMePorcha]

Thanks! You can use the same sublimation ink that comes with it. Best wishes!

[@valencialove6075]

Hi Porcha, I enjoyed watching your video and will be trying this hack. What printer did you use?

[@lisettefuentes556]

hi i added the tape but image only prints on the tape section can you advise me as to what in doing wrong thank you

[@quanfurr8173]

Where do you get your blank shirts from?

[@barbra429]

How well do the colors hold up after multiple washings?

[@ColorMePorcha]

So far, it's held up very well; here's my wash test: kzbin.info/www/bejne/ppqzi3-rmbKHg6c

[@dexterwharton6062]

Befroe the heat press will the glossy side be face up?

[@ColorMePorcha]

We print on the matte side, glossy side is the back

[@tocarramyers8326]

Great video! Can you please tell me the name of the ink you used in this video??

[@ColorMePorcha]

Thanks! Printers Jack

[@michellemorgan6741]

When did you take the painters tape off

[@ColorMePorcha]

I usually remove it right before I melt the DTF powder

[@lanettamathis937]

This was awesome! Hopefully you have a video for dark shirts

[@billcraig5336]

Awesome....What printer did you use to print the image on the DTF paper?

[@RJJohnson-n5j]

Hello! My question: will this hack work on dark colors as well? Thanks!

[@ColorMePorcha]

Hi! The short answer is no. You need different products to make the image show bright. I tried it here: kzbin.info/www/bejne/Z6jQeJigZ72JiqM

[@cminter]

I do have a question though, I'm thinking of creating my own t-shorts, I have the Epson ET8550, what software do you actually use to print your DTF transfers? I've been doing research and so far what I've been seeing is expensive, any suggestions?

[@staceyrchoate5898]

Love this hack! Thank you for sharing your gems!!!❤❤❤I love watching your tutorials!!!💜💜💜1 question-what temp did you cure the transfer for 90secs?

[@ColorMePorcha]

Thanks! 320° with the heat source as close as possible to the image for approximately 90 seconds, could take more

[@Geminimmp27]

Hello, love this hack! When I print from my Epson F170 my print don’t seem to look as wet. Would the power still work?

[@ColorMePorcha]

Hi! As long as the ink is just wet enough for the powder to stick, you should be good

[@Geminimmp27]

@@ColorMePorcha Thank you:)

[@Team300C]

Love the fonts you used...could you please share the names?

[@ColorMePorcha]

Sure, Spring Whisper and the Gunslinger Waterdrop- dafont.com

[@Team300C]

@@ColorMePorcha thank you so much 😊

[@MiMySlots]

@@ColorMePorcha Thankx!

[@audrey_diary]

Dtf film uses ink jet printer or sublimation ink printer?

[@dinkbaby9563]

so you have sublimation printer? and what wha type of printer is it

[@jacobstable]

I love your videos, you are very straight forward. My question is, I have a HP Envy 7640 Printer, so can I use this printer to print on the film paper?

[@Camolleke]

Yes you can

[@tunekathomas1087]

What printer do u use. I tried with the 8550 and I keep getting streaks

[@cordeliadaniels]

Hi Porcha! New subbie here. After watching this video and others, I decided to try this hack out. You seem to get some really great results. After much trial and error, adjusting cure temp and time, press temp and time, multiple times, I just can't seem to get there. My images are coming out grainy looking and/or cracking. I thought the powder wasn't melted all the way so I adjusted the temp and time for that. Didn't work. I followed the instructions to the letter that came with the Yamation kit, no luck there either. I am using the HTVRont auto heat press to cure and press. The platen on that press is about 2 inches from the press mat so I increased the temp and time for curing to make sure the powder was completely melted. And it was! Images still coming out bad. Any suggestions on what I'm doing wrong? I am using 100% cotton to test on. Any help would be greatly appreciated. Thanks!

[@Pdondada_]

What ink is in the ink jet? Regular or sublimation?

[@tanaramagwood4480]

hi love, may i ask what printer did you use?

[@dianyrodriguez3424]

I have a question but before I ask it I must say this was super simple and love the design used. Not to mention tutorial was super simple. Now my question is when you buy design in Etsy can you sell it in your own shop? Or is that not allowed

[@ColorMePorcha]

Thanks! From my experience, each shop has their own rules. If they don't say in the description, which a lot do, you can message them for clarification.

[@Savvygibbs]

so does that work on dark colors also?

[@margkelly1301]

Hi Porcha, absolutely love this video 🙂.I dont have a large heat press only a small cricut one. When you put the powder on then heat would that be similar to using a heat gun for embossing powder, do you think that would work.

[@dnesebarber6441]

Will the painters tape help with lines going down the image? I have the epson 2803 printer but I keep getting black streaks

[@likitarucker6589]

Absolutely gorgeous

[@ColorMePorcha]

Thanks 😊

[@flygrrrrl3753]

Which fonts did you use for the lettering?

[@ColorMePorcha]

The font on top is Spring Whisper, and below is A Dripping Marker; I got them both from Dafont.com.

[@luisavalos9535]

Hi, can i use any sublimination printer like epson eko and get the results?

[@ColorMePorcha]

Yes, because it's about the ink.

[@KemohConteh-yq3bh]

But how do u print on dark cotton fabric with a design that has white or with a white color mixture cause we all know that dtf printers come with white inks and with white t shirt even if it is cotton and the sublimation printer does not have white inks it can work.but what about black t shirt cause the sublimation printer cannot produce white.will it still work ?

[@paddyparis8750]

Thank you sooo much! First time it came out beautiful, thanks again!

[@ColorMePorcha]

You're welcome!

[@MariaGarcia-tw6um]

What temp did you use to melt the powder? I have tried so many times, wasted t-shirts, and can still not get it right. When I pill it, some of the ink pills off the shirt 😩

[@ColorMePorcha]

I let my heat source hover as close as possible with out touching the image at 320° for 90 seconds; Depending on how large your image is and how close the heat source is you may need more time. Also be sure to press twice and peel cold both steps are important. Best wishes ✨

[@lorrainescott8221]

Hello getting black lines o. My picture when I printed it out can you please help me

[@ColorMePorcha]

Yeah those are roller marks and the lines can be worse with the more black in your design. I haven't found an efficient fix for this yet, I take a Q-tip and erase the lines where I can.

[@scuevas1023]

Hello , can you please share your printer settings to avoid any printing streaks?

[@ColorMePorcha]

Hi Sandra! I can share my settings but I still get those "pizza wheels" because it's a hack and we're not using an actual DTF printer, it's a cause and effect type thing. I have read that you can move the wheels on your ink jet printer, but that seems tedious to me. What I do instead is use a Q-Tip to "erase" the marks. I don't have to do this with every print but when I do I've found the Q-Tip to be the most effective. Best wishes ✨

[@scuevas1023]

@@ColorMePorcha Thank you! Glad to hear I’m not alone!! You are awesome!!

[@ColorMePorcha]

You're welcome!

[@ColorMePorcha]

Also, I answered your question in a Q&A video: kzbin.info/www/bejne/oabHaniabZZkgc0

[@DUCKSJO]

my question is when you did the 2nd press, what were you using to cover the image? And, did you have to insert anything inside the shirt?

[@monicaizurieta6136]

When curing, do fume smells come out?

[@ColorMePorcha]

Yes, but in my opinion, it's faint, but an open window or well ventilated area will help with that.

[@honelizlopez3019]

Did you put parchment paper inside the shirt?

[@ColorMePorcha]

Yes. I either used parchment paper or a Teflon sheet I don't remember at this point, but I do know I put something in there.

[@bornlove5897]

what ink do you use

[@boxerbiene8361]

Wieviel Temperatur und Sekunden verwendest du bei geliehen des pulver??

[@dnesebarber6441]

Do you put the tape on the matte or glossy side?

[@ColorMePorcha]

The glossy side

[@melissagriffiths8888]

Could you use a cricut heat press

[@FrostyDLR]

Hey did you use sublimation ink to print your picture?😊

[@ColorMePorcha]

Yes

[@BlueLotus726]

I Love and Enjoy the DTF HACK 💙💙💙

[@tatyannamartinez7063]

Hey Porcha, What kind of sub ink are you using?

[@ColorMePorcha]

Hey! I use Printer's Jack. There's a link to it in the Amazon store in the description.

[@tatyannamartinez7063]

@@ColorMePorcha thank you!!

[@tocarramyers8326]

@@ColorMePorcha great video! I’m super late but I followed your store on Amazon and ordered the the printers jack ink but when I received it I noticed it’s printers jack compatible and it’s not sublimation ink… was this a mistake?? If so just a heads up for your Amazon store. And thank you for sharing your gift 🙏🏽

[@ColorMePorcha]

@tocarramyers8326 Oh no! Thanks so much for the heads up. I apologize for any inconvenience. I just updated the link. Best wishes ✨️

[@carmenelizaa9189]

They Porcha new sub. And I love this hack & very beautiful image & color. But I had a question. What kind of printer did you use? I have an inkjet but looking into getting a sub printer. Thanks a lot ! ❤

[@thealvarados9935]

I have a cricut press do I do the same just stand over it

[@ColorMePorcha]

Yep, make sure to add as much even pressure to as possible, for the best image transfer.

[@erickgueits-so2cx]

What kind of printer useing

[@ColorMePorcha]

The Epson EocTank

[@TawanaTerrellDesigns]

Hi @colormeporcha do you do sell custom T-Shirts? I want to buy 4 custom T-shirts I can design them … I just need them printed and heat pressed. I was trying to find Black Own Business to work with. If so please let me know the cost and how long it would take as I need them by October 13 for a birthday party. Thank you and have a blessed day🙏🏾

[@shantefrancis2371]

Please do a video on adding the texting canva?

[@rhondathomas6773]

HELLO, I LOVE YOUR DESIGN. SHIRT LOOKS GOOD.

[@ColorMePorcha]

Thanks!

[@mlistander]

That is so cute!

[@AmourFateGiftShop]

Sorry, How is this different from the DTG using an Inkjet printer?

[@ColorMePorcha]

The ink makes all the difference. Sublimation ink will last longer than inkjet ink.

[@lucindabowman8348]

Whats the best way to make T-Shirts with a Epson 2800 printer?

[@Cfeldersproduction007]

So can you do it with regular ink or do you have to use sublimation ink.

[@ItsMeSienna]

You'll need to do it with sublimation ink

[@ColorMePorcha]

You can actually use sublimation or inkjet ink. In this video, I used sublimation, but in this video, I used inkjet ink: kzbin.info/www/bejne/a2Pdc2qqaNCEh6M

[@ileanasantana682]

Cure for 90 seconds at what temperature?

[@RayLatrice]

How did u mirror the words??

[@marquitastrickland8018]

OMG you made this look super easy... its gotta be somethig I'm not doing right

[@ColorMePorcha]

Ty! What issues are you having?

[@gorra617]

did you try this on a 50/50 shirt?? u think the washing will hold up

[@BeBreezy]

Love this video! I want to know do you I’m to use a certain software to create your DTF design? If so can I use it in the iPad?

[@ColorMePorcha]

Thanks! I mostly use Canva, and it can be used on an iPad.

[@KayHill-y8l]

What's the name of the printer u used ?

[@donnaanderson1218]

What printer did you use?

[@ColorMePorcha]

Epson ET-2670, that I converted for sublimation

[@donnaanderson1218]

@@ColorMePorcha ok, thank you!

[@Itsmiimiibaby]

How did you print your image?