Cheap and Simple Radio Control Making for RC Models. DIY RC 4-Channel

[@jaimesoberoelviro2498]

25 years ago, when i started in RC airplanes this was impossible to only think about! Today, micro-genius like you , with arduinos help, can do whatever you want! Great job! 😎✌️

[@senuzulme3562]

i wish ı have rc airplanes

[@Emre-ff3xw]

İm started 12 years ago im now 13

[@krishnazaware3939]

@@Emre-ff3xw 🤣🤣🤣🤣

[@azizt.v.6743]

@@Emre-ff3xw LOL

[@TanvirAhmed-bk9fl]

@@Emre-ff3xw kuch vhii🤣🤣🤣

[@censura1210]

This is the kind of project I wanted to build back in 2004-2005 but never got the detailed knowledge on how to do it. Back then I was completely self taught and just a regular curious dude, without much access to the internet etc. Then later got into web development stuff and never really went back to electronics. But it's nice to see how it's done, also with new components like arduino and wifi module which back then wasn't quite easy to find.

[@santhosh8498]

Tnx for your reply 👍

[@muhikbal4474]

Apakah ada jenis micro controller lain dari arduino ini ? Pada saat itu anda menggunakan apa dalam pemrograman

[@juangb7]

Thanks a lot bro, you save my proyect, you are the first one to have a well explained code

[@prakashraut4653]

Bro tell me how to load the code plzz bro

[@emresakir4560]

Gerçekten izlediğim en açıklayıcı rc alıcı verici devresi,kod yüklemesi ve kurulum videosu eline sağlık.

[@furkanerdal.]

Aynısını yaptınızmı verim aldınızmı rc uçak için

[@HirdeshVishwdewa]

These days everyone is using costly flight controllers and stuff. Its fun to watch this implemented without required sensors and GPS...etc. Thanks for making this video, making people realize that a plane can be flown with basic curcuitery as well, fancy flight controllers are not needed :P Thanks again :)

[@aziztunayaral171]

Türkiye’deki diğer KZbinrların aksine çok iyi projeler ve yaratıcı fikirlerle dolusun. Çok iyi bir kanalın var, tebrikler 👏🏻

[@اسماعيلنيمييم]

سلام

[@aziztunayaral171]

quite noble adamın fikirleri yaratıcı

[@фернандоалонсо-м4б]

Чё чё?

[@НикитаБуянов-и3ы]

@@фернандоалонсо-м4б я тоже все это прочитал и нихуя не понял может через зеркало читать нужно XD

[@icupcakelegends]

@@фернандоалонсо-м4б mal

[@MANJU_TEXTILES]

HI sir, thankyou for your idea ,i made this as my school project and it works ,,thankyou sir

[@babumohan4549]

one of the different thinking tech youtuber you are.great effort.cheers.

[@a_ranjanss]

You are super bro I have seen many videos to make it but I fail 5to8 times then I saw your video and I succeed YOU ARE MY IDEAL BRO ❤🎉🎉🎉🎉

[@lucifer_98tc]

It works or not

[@rahulsinghmahar9480]

To do all this should opt for electrical engineering branch.. Or electrical and communication branch Please reply

[@Xavierfun12345]

It is very cheap ..... Thanku bro 🥰🥰

[@ELECTRONOOBS]

Hmmm, nice!

[@antomaria2050]

Hai electronoobs

[@antomaria2050]

Hai electronoobs

[@MridulHasan380]

@Renzo Guzzo why

[@abdelmoumenkorichi4274]

Electronoobs I am asking you for a request and please help me. I want the code for the Arduino, please, not an order

[@raselahmed8311]

@@MridulHasan380 vai apni ki eta try korechilen?

[@gokhancnss]

Hep yapmak istediğim şey ama hiç başaramayacağım. Ağzıma açık tüm videolarını hayranlıkla izliyorum. Teknolojiyi hiç bu kadar açıklayıcı görmemiştim. Başarılar dilerim

[@piekovski]

göründüğü kadar zor değil. konunun içine girdikçe kolay olduğunu göreceksin. biraz araştırdıktan sonra tek engel maddiyat olacak.

[@gokhancnss]

@@piekovski benim öncelikli engelim vasküler demans hastası olmam çok büyük sorun. Fizik konularında da çok iyi idim keşke Almanya'da yada Japonya'da gibi eğitim sistemimiz olsaydı ve benim ve benim gibilerin yeteneği ziyan olmazdı.

[@turkerboss4981]

@@piekovski arduino proje seti aldim bunu yapmak istiyorum nasıl bir yol izlemem gerekiyor

[@merttas4886]

Turker Candemir öncelikle başlangıç seti aldıysan eğer orada ki projeler ile pratik yap ondan sonra böyle projeleri yapmaya çalış daha da yardıma ihtiyacın olursa buraya yazabilirsin elimden geldiğince yardımcı olurum

[@burakbunyaminbasak3094]

@@merttas4886 hocam bu bağlantıların mantığını daha iyi anlamam ve kendimi geliştirmem için önerdiğiniz bir kanal veya eğitim platformu var mı ?

[@triwibowo8500]

Terima kasih telah berbagi ilmu, semoga bermanfaat bagi orang banyak.

[@donivanpotter2762]

Simple if you understand electronics. I've got supplies for experimenting but my health caught up with me. Hands aren't any good anymore. All my fingers are out of place. I can still use them but it puts stress on my muscles and that causes toxins to build up in me. Doctors told me one day I'll be doing an activity and suffer catastrophic organ failure just simply fall dead where i stand. Kind of scares me doing anything foolish. I joked with my dad I'm going to be cleaning the toilet and fall down dead. Told him he'd have to put on my tombstone I was killed by a toilet. Not that I want to die anytime soon but I don't want to be killed by a toilet. Kind of sucks not being able to do nothing. Thanks for the videos. I do enjoy watching other people be creative.

[@dondominic7404]

This is exactly what I am looking for. Thanks

[@soroushsadeghian5278]

Thanks to you I made my own ! the joysticks were trash so I bought a dead radio transmitter and used it's joysticks !

[@ArghyaDinda-fj1ui]

Hi bro when I was copy the code and compile it can not be suported And it want a setup code

[@semihekin]

Hocam Projelerin çok açıklayıcı ve bilgilendirici Emeğine sağlık

[@OmikronClient]

That's what I've been searching! Thx

[@Sunntech.1993]

its,s work or not

[@calmdominion7913]

Work

[@Million_business]

Thanks bro ,it's really works I had tried

[@KSATica]

AMAZING pretty soon hoping to start up my soldering projects never soldered before love the challenge of creating stuff

[@bersaa860]

Mükemmelsin abi senden kalitelisi yok

[@hardcoder2505]

I made a radio controller, your video was very helpful to me, thank you!

[@rezaulhasan4858]

bro can u give code and cercuit diagram

[@horridhanu]

@@rezaulhasan4858 kzbin.info/www/bejne/nGLdaYqsrpppqpo

[@horridhanu]

can I use brushless motor with this receiver, pls reply me.

[@rahulsinghmahar9480]

Bro... You opted for electrical engineering branch or which branch to learn all this

[@kerimebora93]

Ellerine Saģlık. MADE IN TURKEY

[@prov_s195]

you lose vs Italy on first game Euro 2020, AND WE WONNNNNNNNNNNNNNNNNN WE ARE THE WINNER OF EURO 2020

[@braja1980]

Thank you I am working with my son and we are enjoying it. I need some support.the servos randomly turns on its own. I even disconnect the transmitter unit from battery. It just randomly moves now and then. Not sure what I am missing 😢

[@Kendin-Yap]

Thank you very much for your support. This problem probably occurs when the connection between the transmitter and the receiver becomes weak or the connection is completely lost. Another reason is that NRF24 modules are very easily affected by electrical noise (interference). To reduce this problem, the following can be done: - Keeping the cable connections between NRF24 modules and Arduino as short as possible. - Wrapping the GND cable and SC cable of the NRF24 module together (in the form of twisted cable). - Changing the location where you test the circuit. An electronic device located nearby may have a negative impact on the signal connection (such as a modem). - A different solution suggested by one of my followers: Covering the antenna of the NRF24 module with aluminum foil. It may be useful as it acts like an antenna booster. What not to do: - Powering the circuits with an adapter instead of a battery. Because it can cause electrical noise and negatively affect the signal. - Powering the circuits with 9V batteries (small rectangular shaped batteries). Since the current power of this type of batteries is very low, they cannot provide the power required by the NRF24 modules. I hope these tips will be useful in solving your problem.

[@braja1980]

@@Kendin-YapThank you for your response, will try and get back to you. I love your channel, you are doing a great job.

[@braja1980]

@@Kendin-Yap Sorry delayed reply. Got busy in my work. It’s working now but have a new problem. The range I am getting is only 15-20 feet. If I move further away it gets disconnected. I am using nrf24l01 adapter and directly power the adapter from the battery, not through nano.

[@hadipracoyo2754]

Great jobs !!! For RC Plane, if you want to make it cheaper, you don't have to buy 20A Brushed ESC. Just add a Mosfet (for example: IRF3205), a diode and a resistor, then connect it to brushed motor. Of course you need to modify the receiver code. So, the Arduino control the mosfet using PWM. Cheers..... !!!

[@sudeeptpradhan1407]

What will be the overall cost of this project could u tell pls?

[@happysoul6870]

Around 1500 INR

[@radioninety7084]

Cuman mosfet doang panas banget bro😅

[@almosh3271]

Excellent craftsmanship and soldering skill. Job well done :)

[@scopeboy66]

Hello and thank you, You have opened up a whole new world for my rc projects. I am going to use what I have learned from you to convert some old Futaba radios to use Arduino rc Thanks to you Awesome job.

[@horridhanu]

can I use brushless motor with this receiver, pls reply me.

[@Bitkisever510]

Hocam yaptım valla yaptım çok mutluyum kumanda çalışıyor , aşırı mutluyum tam 1 senedir bu projeyi yapmaya çalışıyorum para biriktirip malzeme tedariği sağladım 3 ay içinde Arduino kullanmayı öğrendim küçük projeler yaptım 1 ay sonra lehim yapmayı öğrendim sonunda kendi kumanda mi yaptım Allah senden razı olsun, kumanda alsam 400tlm gidecekti ve bir heves olup gidecekti sayende Arduino kullanmayı öğrendim ve 100 TL'ye kendi kumandami yaptım.

[@Biolumiverse]

Lipo pil kullandın mı yoksa normal ucuz 12v luk pillerden mi kullandın

[@Bitkisever510]

@@Biolumiverse ben kumanda da usb kullandım ama alıcıda ise 3s lipo kullanıyorum

[@Biolumiverse]

@@Bitkisever510 kumandada 2s lipo pil kullanmış biz 12v luk normal pillerden kullsak olur mu acaba lipolar çok pahalı

[@Bitkisever510]

@@Biolumiverse 12 v klon Arduino ya yüksek geliyor mümkün olduğu kadar 10v gecmemeye çalışın , 9v pil kullanabilirsiniz

[@Bitkisever510]

@@Biolumiverse 12 v tavsiye etmez bir çok kişi klon Arduino da yanmaya sebepmis

[@GrandLombok]

Wow..keren..saya mau mencoba membuatnya....mkasih banyak 🙏🙏

[@GrandLombok]

Untuk jarak jangkauannya berapa jauh??

[@newdawnXuniverse]

THANKS BRO FIRST I COULD NOT UNDERSTAND DIAGRAM THEN SAW YOUR VIDEO PART NOW I CAN MAKE MYSELF A MISSILE!

[@gravit0n]

excellent! wish you success!

[@Robin-qw2by]

Thanks man. Now I can complete my project . Thank you so much 😊😊😊😘

[@e-ways140]

Its working or not

[@Shubham_shubhaka]

This will reduce the weight of rc plane!! Thanks bro.

[@Shubham_shubhaka]

also saved me so much money!!

[@pratyakshaggarwal5737]

Does your transmitter work

[@geoffroy9659]

Bonjour Excellent travail bravo 👏 👍 👌

[@Parkan15]

5 минут "полётов" на таких стиках...останешся без рук. Но в общем идея супер! Лайк полюбому

[@suleymanduzgan8843]

hocam rc uçaklarda kullanabileceğimiz yarı porfesyonel diyebileceğimiz bir model daha yaparsanız cidden çok güzel olur

[@haf-ber9467]

Yine süpersiniz hocam. Tebrik ediyorum.

[@drakevelazquez8728]

It would really help if you released the unedited part without music and speed up with commentary/tutorial. Gives people more options and you cover the experiences people that understand at a blink of an eye what your doing and then for the newbies a solid background of what to think back on when I keep doing research. Hope I can make this work as you did thank you for the video

[@meysammezgynezhad9893]

Very good job, I hope you will be successful

[@madesugiri3872]

Hay bro thanks you... You cool 👏👏👏. Your smart n genius. Amazing very amazing project

[@lemcosmo]

Thanks for show us. For sure I'm going to try to do it. Which is the maximum range you have found this radio control has?

[@Kendin-Yap]

The theoretical range is 300-500 meters. Soon I will test this remote with a model airplane and publish its video.

[@genuineelectroniccomponent6663]

Wating

[@jjab99]

Brilliant!! Well done and many many thanks for sharing this with us all on here. I love your videos and really look forward to them. I shall be making one of your plane builds soon and I will see if I can make it fly. Please keep these videos coming, they are so interesting and informative. Many Thanks & Have Fun, Joe

[@Kendin-Yap]

Thank you

[@xiaozuwu9329]

guys,you say what I want

[@Oombu008]

@@Kendin-Yap Hlo frnd if I connect the receiver to a flight controller like omnibus or anyother flight controller will it work friend???.Bcoz I am planning to make these for my project.

[@horridhanu]

can I use brushless motor with this receiver, pls reply me.

[@ireshakumari5360]

I make this transmitter and receiver, but it doesn't connect with receiver. What that reason for that

[@DharmeshTechZone]

Nice and deep explanation thank you

[@777fiddlekrazy]

Hearty and Rugged AF!! Nce work!

[@ZufarjonXojiakbarov]

I didn't understand how to connect and solder them😢

[@Nightmare-dd4bp]

lmao

[@danielsampong6607]

It looks neat but what’s connected to what isn’t very clear

[@Nightmare-dd4bp]

@@danielsampong6607 brother just review the code

[@UMUTSaglam-ur4hn]

There is a diagram of the connection points in the description section.​@@danielsampong6607

[@UMUTSaglam-ur4hn]

There is a diagram of the connection points in the description section.

[@RahulJain-rj6jw]

Thanks for this amazing project, I love your code too much. You are amazing.👍👍👍

[@outgoodmedia2448]

Can you help me for the coding I try in my android but it showing pls complete sketch pls help me

[@horridhanu]

can I use brushless motor with this receiver, pls reply me.

[@viniciuslemos8788]

Eu sou do Brasil mas eu acompanho seus vídeos desde sempre acho muito legal vou até me inspirar nesse projeto

[@renukahettiarachchi8717]

Very nice. can we do use 7.4V 850mah lipo battery both transmitter and resiver

[@Kendin-Yap]

Yes you can

[@ثائرالكرخي-خ3ع]

حقيقتا انت مبدع اخي. واحب ان اتعلم منك

[@ivan868]

0:14 - the schematic

[@hugomg1000]

excellent project, I would like later a video implemented in an airplane to see the operation thank you very much

[@Kendin-Yap]

Thanks. I will make an airplane project with this remote.

[@aniszed3641]

@@Kendin-Yap plz can you do it with 6 servos.thank you nice project

[@jesusramirez4259]

​@@Kendin-Yaphola es posible Aserlo funcinar con dos motores ?😅

[@Kendin-Yap]

@@jesusramirez4259 Yes it is possible

[@jesusramirez4259]

@@Kendin-Yap perdón pero como, saco otro cable del motor?

[@htmcreation4146]

I am waiting for the plane from this remotcontrolar

[@8bitenial313]

He uploaded months ago a diy plane. Maybe they are combinables

[@d.predeaptha564]

Is it possible to install a 30A ESC and a brushless motor? I have created one of your designs before. 8:55

[@Kendin-Yap]

Yes it is possible. But you may need to update the values in the transmitter code as follows. (0.570, 800, 1023) on throttle line

[@MrBobWareham]

Thanks for the video very nice project and sharing is good for people that cant do it as well as you 5 star

[@abacaxirusso2023]

Mano que legal achei top 😁👍 🇧🇷🇷🇺

[@ahmetzafer7469]

Abi fırçasız esc yaparmısın el yapımı çok merak ediyorum

[@krishnasuthar8993]

Please make the plane of this transmitter and receiver fast

[@alexii6215]

Hi again. Two questions. What's the difference between black red and white male headers on the receiver? Why is the 100uf capacitor used? Can I make the plane without it? Please someone, answer!

[@Kendin-Yap]

Colors are representative. Signal, VCC and GND. The capacitor is required to supply the current required by the NRF24 module. It can be used between 10uf -100uf. If you do not want to use a capacitor, you must supply external power to the NRF24 module.

[@alexii6215]

Thanks a lot

[@citizendemented]

@@Kendin-Yap Hey, same question here from a mechanical engineer 😃. I just cannot find why did you use capacitor here? How did you decide its Farad capacity (and depending on which formula)? How can you manipulate the current with capacitor? I think we should expect 3.3 V of voltage from in and out of the capacitor since you connect that output of the Arduino Nano. So, I don’t understand how the currrent is being changed. Couldn’t we use resistor instead? I want to get into deep of the physics of it.

[@crumbly5955]

Thank you very much! I was trying to find cheap and good controler and reciever on arduino, your tutorial is the best

[@fabxxn423]

Does it work in your proyect?

[@MegalongMusic]

interesting! :-)

[@goanga3749]

Hello, i'm new to using these nrf24 transcievers and i have a question . I want to use them to build a long range remote control car and i was wondering, will i gain more range if i use one high power nrf24 module for the transmitter and another high power nrf24 for the reciever, instead of using one high power nrf24 for transmitter and one normal pcb antenna for the reciever, the connection will be only one-way. Thank you in advance for the reply !

[@Kendin-Yap]

You can use NRF24 PA module (with Antenna) for receiver. Range will increase. The code and links are the same.

[@goanga3749]

@@Kendin-Yap Thank you for the fast reply !

[@osrlazlo]

Hey I have a question, can you use an Arduino Nano for the transmitter and an Arduino Uno for the receiver?

[@Kendin-Yap]

Yes it is possible.

[@Morbrine]

Thank you🤩 excellent project but i have to ask something about the throttle. İs it only 1 and 0 signals or varible? Because in the video motor only turns on and off

[@MohammadBzieh]

i need help ; why does he write to the border map method (in the boolean part :true) ; if he write true the border map method will reverse the value after mapping it into between 0-255 ; so my exact question is that why he needs to reverse the value . i need answer please ,thanks

[@sinestra3321]

Is it possible to use an arduino nano in the radio and a esp8266 in a drone

[@jesustobisimiaibinu2434]

I was wondering if this is possible to make using a breadboard instead of tin welding it

[@simonschuh5283]

I am suitably impressed.

[@tomjoad1060]

Nice job, will learn from you.

[@pgbfpv4121]

This is brilliant . Can the receiver be made with arduino pro micro ?

[@Kendin-Yap]

Yes, it can be done. Maybe a few pin numbers are different.

[@creationmode9889]

Hello , please Convert this 4 channel transmitter and receiver to 6 channel transmitter and receiver

[@shivendra.655]

👍yes.

[@lapajing4788]

Super 👍 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@cengizkeskin625]

Yani bilgisayara hangi programla karta yukleme yapilir ayrintili bir video atabilirseniz super olur.Tesekkurler

[@omeg.atr08]

Merhaba Arduino nun sitesine girip oradan uygulamayı indirip bir azdan atacağım linkteki kodları kopyalayıp oraya yapıştırabilirsiniz

[@omeg.atr08]

Bu arada benim de size bir sorum olacak şu 1.13 deki sarı ve kısa ve 2.53 deki uzun telin adı ne

[@juanignacioarena3141]

i suggest to use a 3.3v voltage regulator to the NRF24, the arduino regulator is not enough, that's why it hadn't enough signal range when u tested it

[@RallyofVibes]

I made a slight upgrade to mine, i added a KK2.1.5 flight controller to make it more stable

[@ozkansener9358]

congratulations!! great project. have you ever check total range about this project ??

[@Kendin-Yap]

Thanks. About 70-80 meters .. kzbin.info/www/bejne/b4SwqnWEYqdmjNE

[@matthewalexis6154]

Thanks for the video. Its VERY helpful. What is the diameter of the rosin that was used for soldering? I have .062 and was wondering if that is too thick.

[@Kendin-Yap]

I usually use 0.75mm

[@AliSajidCS]

Cheapest and simplest arduino controller I have seen so far (Y)

[@yusufdinler5073]

Bu joystickler ve bu kanal değerleri ile servolarda maksimum dönüş elde edebildiniz mi?

[@Kendin-Yap]

Maksimum değerleri elde etmek mümkün ama asıl sorun orantılı ve kararlı hareket elde edilememesidir. Bunun sebebi de arduino joystiklerindeki potansların aşırı kalitesiz .

[@DaiwikPlayz]

What is that rod thing that you connecting with the wires?

[@santhosh8498]

I have finished all the connections as per the video and I have connected the battery but I am not getting any movement in the motors . What could be the cause for it?

[@gozdemuhendisler7842]

Öncelikle merhaba size bir sorum olucaktı.Bu uçağın üstüne bir adet daha servo eklemek istersek bunu kumandadan nasıl kontrol edebiliriz acaba teşekkürler.

[@robingood2493]

How much you need in order to make radio rc model which can fly around the world? or another planet?

[@Ensar_61]

9:50 peki benim bir sorum olacak sol joyistik aşağı hareket ettirildiğinde motor saat yönünün tersine mi dönüyor ben bu sistemi arabamda kullancamda onun için soruyorum

[@Kendin-Yap]

Verici kodundaki Throttle satırında olan ilk 524 değerini 12 ile değiştirdiğinde çift yönlü ESC ler ileri ve geri şeklinde çalışır. O zaman araba için uygun olur.

[@alexii6215]

Hi. Can you use a PA wireless module to the receiver so you can fly further? Can someone please tell me? (If the question is dumb than sorry. I'm a beginner)

[@Kendin-Yap]

kzbin.info/www/bejne/ppuln3mQfMumoKs

[@ahmetdemirci4861]

çok güzel olmuş elinize sağlık ama hangi joystick kullandınız onu öğrene bilirmiyim

[@Kendin-Yap]

Teşekkürler. Arduino joystick ismiyle satılıyor.

[@ahmetdemirci4861]

@@Kendin-Yap peki nano yerine kumanda için uno kullanıla bilirmi sizin verdiğiniz kodu ata bilirmiyiz

[@Kendin-Yap]

@@ahmetdemirci4861 Kullanılabilir. Ama NRF modülü için gerekli kütüphane dosyalarında farklılıklar olabilir .Farklı versiyonları denemeniz gerekebilir.

[@vindulaherath6400]

Is it safe to connect different voltage batteries in series? (also these batteries have different mAh.)

[@Kendin-Yap]

I would not recommend.

[@nuhmuratguney]

Daha önce yapmış olduğunuz çift motorlu botta bu kumandayı kullanmak için neler yapmam gerekir yardımcı olur musunuz? Sadece yazılımsal değişiklikler yeterli olur mu?

[@rutwaghela3911]

Excellent bro

[@charlymodel4946]

Exelente! Que alcance tiene? Por que tengo entendido que estos modulos llegan hasta unos 10 metros de alcance. Se podria ampliar esa distancia? Desde ya muchas gracias.

[@Kendin-Yap]

This circuit has a range of 70-80 meters. A range of 130-150 meters is possible if NRF24L01 + PA module (with antenna) is used in the receiver circuit.

[@charlymodel4946]

@@Kendin-Yap Muchas gracias por su respuesta! Estoy entusiasmado con encarar el proyecto. Saludos desde Argentina.

[@absaw5735]

Can this be integrated into an RC toy car? Say for upgrading transmission connection or simply replacing the stock remote controller with this one.

[@Johnny-tc6tz]

Great job, you defiantly have great skills. Was wondering the distance of the TX & RX

[@Kendin-Yap]

Thanks. About 70-80 version for this version.

[@babudas7142]

Sir you are using nrf24l01 in receiver, Can i replace it with nrf24l01+ (with antenna) for greater coverage ? should i need to change any circuit?

[@Kendin-Yap]

Same code, same connection

[@ardanadaroglu2844]

peki buna fırçasız motor takılabilirmi

[@Kendin-Yap]

Evet. Fırçasız ESC ile birlikte takılabilir.

[@sirClogg]

With this setup is there a way to detect and disconnect/send warning, when the liPo (either in remote and motor) is reaching damaging discharge of about 6V?

[@Mailzas]

For remote I would just add lipo protection board, for plane same. If you want to get signal from plane, you should use same RF chip, as in remote, and then give led to blink, ar even better add OLED 0.96 screen on remote.

[@ghosthate4424]

Quick question: Is the colored wire necessary? Second, what's the difference between the 100uF and 225uF, does it increase the range somewhat, or does something else? Thank you!!!

[@Kendin-Yap]

Color doesn't matter. Capacitors are not for distance. It is for feeding the NRF module with stable energy.

[@ghosthate4424]

THANK YOU!!!

[@bautistagallo5990]

hello I can do it with esp8226 because it is cheaper and I put emitter and receiver

[@JoseHernandez-xk2ln]

What is that bronze looking wire you use to connect the pins? Can I use jumper wires instead

[@Kendin-Yap]

You can use jumper cables.

[@sirClogg]

I'm new to this sort of things. Why is he making those connections out of solder? Why not just use jumper wires? Is it to make it flat and tidy (resembling pcb) or does it have some special connective benefits?

[@Kendin-Yap]

Soldering must be done to be safe and stable.v

[@sirClogg]

@@Kendin-Yap what I ment is why make connections out of solder. Rather than cables soldered at the ends.

[@yusufaydn5148]

Lehimleme biraz karışık kablo ile yapılırmı