How to make a jig to crosscut at an angle. First prototype

Sometimes we need to crosscut at an angle the end of a board. But if we can a homemade table saw with homemade lift it is usually imposible to tilt the table saw disc. So we'll see how to make a table saw jig to crosscut the end of the boards at 45 degrees.
How to improve this 45 degrees crosscut jig: • How to improve the jig...

[@testingbeta7169]

thankyou for showing us the mistakes, that are common for new workers. we appreciate the real video and not the 1000 takes to get the perfect video

[@NV..V]

Sergio - Another great video. I originally built this jig for a single, simple cut, because I was being lazy and didn't feel like dragging out the Miter Saw cart, connecting up the various vacuum attachments and having to do "angle math." It worked great. However, I have found that it is quickly becoming a KEY jig for my shop and I have used it dozens of times over the past few days! I already have a plan to modify it a bit so that I can show my son how to use it. Thank you again for posting your videos - I learn something new with each one.

[@ACosmicCastaway]

I often visit your channel. I'm used to your accent by now. Improvement is always welcome here. Thanks.

[@brianhutchinson7635]

Table swa

[@Philhoppermiller]

i have an old saw that only cuts straight up.I could never cut an angle on it till I saw your video. Thanks for sharing.

[@yosiwajcenberg9298]

Thank you very much, Sergio, I watch your video some weeks ago and I build the same jig because It"s simple and easier to use than a compound miter saw. I just use two clamps because the parts to cut are longer and larger.

[@luciancaliman1617]

Danke für dieses gute Werkzeug und die gute Erklärung.

[@sandman2651]

i wish i was as good at woodwork as you are sadly i bought a table saw only to realise when i wanted to make more precise things that the table top is no where near flat and have to work out a way of replacing the top until then im stuck but love watching your vids as you explain everything as you do it keep up with the great work

[@kenjett2434]

Great video I had to make a jig very similar to this few years ago when I was framing a custom bay extension off my living room. I also modified it for some custom moulding I had milled. These jigs are as nesscessity when cutting compound angles if accuracy is important.

[@hansdegroot8549]

Another great build. You are very inventive. I'm sure you will overcome the small problems you mentioned in the video. Thanks for sharing.

[@keiththrelkeld5890]

I'm liking the clamping method that you use. I have no clamp on mine, just hand pressure.

[@keiththrelkeld5890]

Sergio Acuña Padin nah, I have the support bar, same as yours. Mine doesn't protrude past the 45 degree cut like yours though, which I like yours better.

[@stevedigby883]

Well done! Simple and easy to make. I did not know there are prompter apps for cell phones. Once again, I thank you for your videos

[@Wavemaker2k8]

You, sir, have a genius mind. I like your channel. Very good.

[@ijazsarwar5655]

Thank you sir you are a great teacher for me .I am new in this job and your videos are very helpful

[@gilbert4351]

Awesome! Thank you sir will look forward to next your other videos!!

[@WoodworkingwithDIYtools]

Thanks for watching :)

[@tonbrochs7774]

Me encantan tus videos. Eres una gran inspiración para aquellos que queremos aprender. Muchas Gracias.

[@VishwaneetSingh]

WoW!!! Loved it!! Can't wait for the next video on the improvement of the jig.

[@JohnColgan.]

You really need to cut 45° bevel off the sloped piece parallel to the saw table and move toe whole job to left 19mm so the pointed edge just reached the saw blade, otherwise your mitre cuts will be up in the air !!

[@hmmoon]

you are the best Woodmaker ty for this 5star

[@neelsackerman1202]

Thank you for a great and understandable video Sergio

[@KennethColeStatenIsland]

Nice, thank you.

[@andyflint1240]

your videos are always very good

[@drasticfred]

You don't need the base plate at first place. Get rid of it, so you'll get at least 1 cm height improvement. You need a 45 degree cut to the bottom of the jig, as a result the slope of the jig meets the saw table.

[@MrGlyn321]

Hi Sergio, thanks for another nice video. Can I make a suggestion, that if you were to cut a 45 degree angle on the edge of your base board, which rides along the blade, then extend your support piece to sit on the table, this should then give you an extra few millimetres of depth to your cut & as long as your work piece is square & cut to length, you will only have to rest it on your saw table top to clamp it. I hope this makes sense, as I drew a diagram, to explain, but don't know how to upload photos to the comments. Kind regards, Glyn

[@MrGlyn321]

Thank you for your reply. I look forward to seeing what you have done. You would have gained a few millimetres, by doing what I suggested, but it would only have been the thickness of your Base. God bless you, Glyn

[@nafseysaafiya6381]

very good God bless you

[@abdhalim1660]

I am new in this job. Very helpful to me.... Happy New Year to U and family

[@mmjaque1]

Buen video amigo y facil de entender. Good video dude and easy to understand !! gracias, thanks.

[@joebrown1382]

Love to watch your videos. Nice jig.

[@kevinbowker2385]

Very nice. Thanks for sharing!

[@MKRM27]

I love how he says jig... or hig.

[@GeneralShermanMake]

Funny accent) I like it

[@WoodworkingwithDIYtools]

Thank you very much 😀

[@BNBFORYOU]

really you are great

[@ButeoLineatus]

why not adjust the bevel of the saw to make it turn....

[@margarita62able]

Excelente

[@salmanali-lr2kj]

Thanks very much

[@josephagius750]

If you use a thinner piece of wood the blade will cut all the way up. Regards. Joey

[@avanifilms4317]

nice video

[@geoffreysmith8999]

excellent video thank you

[@hakeemdxb5221]

Good work

[@34813ctr]

Sergio I like this video - have you made a follow up video on how you improved this jig. Burt

[@robertbrunston5406]

Thank you.

[@tatin71]

Excelente, gracias.

[@ThinKreaFaiDaTe]

Great idea!!👍👍👍👍👍

[@LeosTueftelei]

👍 Nice work 👍

[@alphasigmasezon8597]

muito bom

[@almansoral-guhrbani5611]

رائع جدا جدا أنت أستاذ شكرا جزيلا

[@marcelogomes2870]

Muito boa idéia.

[@dougsholly9323]

I give you credit for trying, but there are a few issues... 1. Once you improve your height of cut, you'll cut your stop block off. 2. This is only an issue that needs to be solved for your table saw, since 99.99% of all of the rest of the table saws in the world can tilt the blade 45 degrees.

[@Tomwinters85]

Couldn't you just turn the blade to 45 degrees?

[@hj8607]

you shimmed the second 45 board but failed to shift it's point (a virtual point that you created by lifting the sloped angle board with the shim) back towards the cut edge of your cross cut sled base . if you look at the gap that happens from the start to end of the cut on your angled surface it become obvious that it is not making accurate cuts because the edge of the cutting jig is no longer parallel to the blade , and is over cutting at the end of the cut .

[@alexfisher2527]

Неплохо! Лайк однозначно!

[@fernandocabrita3740]

Agradecia, que desse as Medidas.

[@woodywoodworkerfuller9921]

Nice !!!!

[@adebayoademola8668]

i need to make a 30 degrees cut can i modify to work it?

[@alfaomega4381]

habla muy gracioso...

[@isakwatz11]

Nice and simple as usual. Did you make your table saw yourself? And did you make this because the blade doesn't tilt? Because all commercial table saws I've seen have a tilting blade.

[@rayanslim]

Great even if you have a tilting arbor. To get perfect 45 and then back to perfect 90 uses valuable shop time between cuts. This way you grab your jig and never mess with your blade

[@fredrouse9334]

Nice one

[@nhanhuynh5900]

Nguoi chau au th mih.

[@rovindosejahtera5515]

brilliant..!!

[@herbsu4330]

How did you get the opposites to the exact length?

[@essamibrahim761]

Profissional

[@fredreichart2799]

What material do use for the base of the sled?

[@Twentyfour222]

Top, 👍👍👍👍👍👌👌👌👌👌

[@willy8477]

perfeckt

[@juancarlosbarrantes8836]

Willy Mans y

[@oliviarocha5126]

Sounds like demitrology guy...youtube that

[@chrisadamson9556]

Or you can just buy a Miter Saw...

[@jerryscaletti9471]

a

[@fivestarsdriver5771]

Ribet banget cara Lo, Drun 😂

[@Amulet-07]

No gut!

[@WoodworkingwithDIYtools]

Well, my improved versions works quite well 😃

[@santoshkumarss4134]

Russian? 😆😃

[@WoodworkingwithDIYtools]

No. I am from Galicia, in the NW of Spain

[@santoshkumarss4134]

Woodworking with DIY tools ahh I see. Your work is so clean and amazing. Best of luck each day. 😍

[@raazbangash_review_all]

Bullshit ....... THAT'S IT