How to make a Magnetic Bookmark with your Cricut using Print then Cut

In this video you will learn how to make your own Print then Cut Magnetic Bookmark with your Cricut machine. This step by step tutorial will show you everything you need to know including what magnets NOT to buy. These fun little bookmarks can add your own personality to any book you read! They also make great little gifts.
What to watch next:
How to upload designs to DS: • How To Upload Free Ima...
Learn to make print then cut stickers: • Cute Stickers With You...
Learn to make print then cut gift tags: • Print Then Cut Cricut ...
Some of the links below are affiliate links, meaning I may make a small commission from your purchase. This helps me continue to create free content for you to enjoy!
🖍 Designs Used 🖍
Cowgirl Boot: designbundles.net/free-design...
Flower & Book: from Canva images
✂️ SUPPLIES ✂️
Cricut Maker cricut.pxf.io/rQXR6R
Cardstock (CAN) amzn.to/3sG6MSv
Cardstock (USA) amzn.to/484pOSZ
Laminate Sheets teckwrapcraftaffiliateprogram...
Magnets (CAN) amzn.to/3ZeX6dR
Magnets (USA) amzn.to/3sW0ZZ5
Scoring Wheel cricut.pxf.io/3eovjA
Weeding Pen teckwrapcraftaffiliateprogram...
Printer (CAN) amzn.to/3Liz9Nh
Printer (USA) amzn.to/3LkuVV9
Shop My Favourites:
Cricut: cricut.pxf.io/Ao625j
Teckwrap: teckwrapcraftaffiliateprogram...
HTVRONT: shrsl.com/4gf5s
Amazon StoreFront (USA): www.amazon.com/shop/littlecra...
Amazon StoreFront (Canada): www.amazon.ca/shop/littlecraf...
As an Amazon Associate I earn from qualifying purchases.
🌸 CHECK OUT MY WEBSITE 🌸
www.littlecraftnest.com
🌼 FIND ME ON SOCIAL 🌼
Facebook / littlecraftnest
TikTok vm.tiktok.com/ZM8SUT9gj/
Instagram / littlecraft. .
Pinterest pin.it/75jcKAS
For Business Inquires Only Email Niesha at info@littlecraftnest.

[@geraldineself6017]

Your tutorial is very informative. Thank you for doing the magnet testing for us. I really appreciate it very much. Have a blessed day.

[@littlecraftnest]

I’m glad you enjoyed it. Happy crafting!

[@AshleyLouCreates]

I just want to say this was a great and well thought out tutorial. I’ve been wanting to make magnetic bookmarks for my shop and this was super helpful.

[@littlecraftnest]

I’m glad it was helpful! Happy crafting!

[@melissamcdonald7180]

Great tutorial. New to your channel.

[@littlecraftnest]

Thank you!

[@estherruiz2475]

You for all the info.

[@quoteunquote101]

Just amazing thank you

[@littlecraftnest]

Glad you enjoyed it. Happy crafting!

[@jamanetaylor454]

Thank you,such a great tutorial

[@littlecraftnest]

You’re welcome!

[@minniezurkuhlen7555]

Very cute project! Thanks for sharing.

[@littlecraftnest]

You’re welcome! Happy crafting!

[@joifunches5648]

Thank you!

[@littlecraftnest]

You’re welcome!

[@JenniferWilson-vt1iz]

Doublesided glue dots work perfect for the small silver magnets.

[@DoseOfBaani]

The double sided glue dots are larger then the small circle magnet...and stick out catching whatever touches the glue dot that's exposed. They are .5" diameter... And the magnets are I believe just barely .4" diameter.

[@ryason3893]

@@DoseOfBaani Agree. I tried the glue dots and they did show through. Also, the glue dot lifted the magnet off on one side of the bookmark after a day. So there was that as well. Don't recommend. I tried using hot glue...and nope. Same thing happens in which the magnet on one side of the bookmark lifts off. The combination of magnet, glue, and laminate has and is proving to be a bit tricky for me. 😬

[@sanla4325]

I love this! Can you share the keywords/creator name for the cute book stack? I can't seem to find it in Canva.

[@millielucas3683]

Your tutorial is amazing. Can you let me know the exact tecwrap sheets you used. Print or non-print, holographic or white etc. I saw there were multiple selections on the website but really love the one you used in your tutorial. Thanks, Millie

[@littlecraftnest]

I used the holographic laminate sheets (non-print). You can find them here with my affiliate link teckwrapcraft.com/en-ca/collections/printable-paper/products/inkjet-printable-sticker-vinyl?variant=42750377918662

[@Bustermcfe]

Great tutorial. Can I laminate the print then cut paper using pocket sheets and heat lamination?

[@littlecraftnest]

Yes you can laminate it. I use cold self laminating sheets from Teckwrap, I have not done it with pocket sheets and heat. I’m not sure pocket ones would work unless you did a larger offset so that the laminate seals - you would also have to find a higher pressure setting to use on your Cricut.

[@ryason3893]

@@littlecraftnest I have tried the "heat pocket laminate" version and I found it to work for me. There were a few bookmarks where the laminate did not seal completely at the edges after the cut, so what I did is run them through individually through my laminating machine a few times. That fixed it. 😊

[@littlecraftnest]

Awesome! Thanks for sharing.

[@jillelainejones]

Do you have a link on how to use the wireless cricut 2

[@littlecraftnest]

Every Cricut machine operates using Cricut Design Space. So if you watch a tutorial for a Maker, in most cases you will also be able to do the same thing on the Air 2. For this specific tutorial you would not be able to use the scoring wheel on the air 2 but you can use the scoring stylus instead. All other steps would be the same. I hope that helps. Let me know if you have any specific questions.

[@dorothyrose9262]

Do you send this to your regular printer to print all the colors in these book marks? And do you have to have canvas to make these?

[@littlecraftnest]

You can make these in Cricut Design Space with any image you want to use, you do not need Canva. I use a regular ink jet printer to print these.

[@adasoliss1]

I was wondering if you can make a tutorial about round circle stickers how do i create the temple?

[@littlecraftnest]

I have several sticker videos but none dedicated to round stickers. What you can do is grab a circle from shapes, add your image and text on top. Select all layers and flatten. Then duplicate to make however many you need. Some of these videos may help. Die Cut Stickers: kzbin.info/www/bejne/r4Xdgaukdpmdh9Usi=vBsyVWUK10yu7Rtd Sticker sheets: kzbin.info/www/bejne/bIPCpmmBaJWdjbcsi=9pzG4Ez8-lrJtxta Easy Peel stickers: kzbin.info/www/bejne/gX6ul4ejat16g8ksi=rr74eX3VnkGJcY1U

[@KristaDoyle]

Where did you find the magnet sheet?

[@littlecraftnest]

Dollar Store.

[@AussieMumVLOGS]

Hi ive never used cardstock before. How many gsm is yours

[@littlecraftnest]

I’m using regular craft cardstock, usually 65 lb. Don’t go too thick as it could jam your printer.

[@AussieMumVLOGS]

@@littlecraftnest is lbs and gsm different? I've never in my life used cardstock. Looks cool tho and want to try. Thank u