You’re the best teacher! Thank you…love your vids!
@whatstrendingwithlory Жыл бұрын
This is GREAT! Thank you for sharing this 😀
@louisemcclain6189 Жыл бұрын
How Awesome What a Great Idea Thanks Corrine
@whitney241007 ай бұрын
What magnet sheets are comparable? These arent available right now.
@CorinneBlackstone7 ай бұрын
These ones are basically same www.amazon.com/dp/B0B6FLH8V7/ref=cm_sw_r_as_gl_api_gl_i_dl_TFCEK3PQGANEVEAQTA4M?linkCode=ml2&tag=creativecra02-20
@Ebonye-xr4bn Жыл бұрын
I love this! Ordering supplies now...can't wait to create some cool magnetic bookmarks!!
@CorinneBlackstone Жыл бұрын
I hope you’ll share what you make! I love seeing everyone’s creations!
@barbra429Ай бұрын
How were you able to print a full sheet?
@CorinneBlackstoneАй бұрын
It’s no larger than cricut allows it’s all about how you place items on the canvas to print them
@HeyCaudle6 ай бұрын
Thank you for sharing. I'm hoping someone can help me. I'm using what appears to be the same magnetic sheet with the blue peel off (20 mil), printable vinyl, Cricut's deep point blade, and the 0.06mm magnetic sheet setting on the Cricut My vinyl paper starts ripping almost immediately during the first pass. In addition, I can't seem to get the magnetic sheet to cut at all. I've added more pressure, I've tried cutting out the magnetic separately using the heaviest setting with no luck. I saw another video where someone used the same settings/more pressure with a thicker magnet sheet (26 mil) and it cut like butter. Does anyone know why I'm having a problem?
@CorinneBlackstone6 ай бұрын
First sadly cricut materials are not great quality which is likely what the ripping is. But also I would check your blade super close and be sure it’s not damaged in any way. I’ve had a blade where the tiny part of the tip is broken off and it doesn’t work
@HeyCaudle6 ай бұрын
Thank you so much for replying and your suggestions! I bought the printable vinyl brand on Amazon and will purchase the one you have linked above to work with after I check/switch the blade. Thank you again!
@HeyCaudle6 ай бұрын
Update! I bought a new one (housing and blade) today and that solved the problem. One pass gave me a perfect cut. Thank you so much for suggesting it! My original one is actually brand new and must have had a bad blade.
@annettekindler6994 ай бұрын
I love this !! Thank you for such clear explanation :)
@adrianaariza-jones3694 Жыл бұрын
Hi Corinne. Thank you so much! It's an enjoyable project. I have a lot of ideas for Christmas presents. I love your T-shirt🥰; I have two corgis🐕🐕, which got my attention. Thank you again. You always have the best tutorials. 👍😁😍
@danathompson72739 ай бұрын
perfectly explained!! Thank you
@passportonly34957 ай бұрын
Thank you so much for this tutorial!! I needed this!!
@tammypottinger3691 Жыл бұрын
Great stocking stuffers for Christmas! Thanks for the great video!
@_Christ_BeMagnified8 ай бұрын
Loved this! I wasn’t sure how to start! Thank you!!
@kristip5065 Жыл бұрын
My daughter is a librarian and would LOVE these!! ❤
@gingermomof6 Жыл бұрын
Ahhhhhhh!!! love it! I love magnetic bookmarks -other bookmarks tend to just fall out and I lose my place. Now my girls are reading too and this will make great stocking stuffers. Great tutorial
@marleenesho61167 ай бұрын
Any help??with me I can do the pictures upsidedown and it is come right but the word on the pictures doesn't come right! I attached and flatten nothing work
@CorinneBlackstone7 ай бұрын
If there are words on the image you cannot have them match up perfectly. When you limit upside down you don’t flip it another way or the words will be backwards
@marleenesho61167 ай бұрын
thanks a lot for your answer.so, the word doesn't work?I saw a lot magnatic with word and it is matching perfectly.
@CorinneBlackstone7 ай бұрын
@@marleenesho6116 they will match if you put the same symmetrical shape behind the words. Think of it like folding a book page in half it will match up because both sides are the same shape and size the words will be facing the right way on both sides. You just have to use the same shape for both sides. So using an offset may not work because some parts will be different shapes
@marleenesho61167 ай бұрын
100%right
@gingerelle1019 ай бұрын
This makes me so happy. Very easy to follow, thank you.
@melsmedia Жыл бұрын
Thank you for this tutorial Corinne! I’m excited to make these 🤗
@prptink Жыл бұрын
These are so cool ❤love them. Thanks. Stay blessed love 🥰
@theresatyler96378 ай бұрын
Hi Corinne! Do you think this concept would work the same on printable magnetic sheets? Was searching for your suggested product and came across the printable magnetic sheets. Thank you for all your great tutorials! I've learned so much from them!! Also, I just finished reading "Fairytale" by Stephen King. Super good! Not at all a typical Stephen King scary book. Great for young adults up to older who love nice, exciting, relaxing reading!! Take care from San Diego.
@CorinneBlackstone8 ай бұрын
It should. I don’t see why not :)
@orepaorodorodo26149 ай бұрын
Hi. Is it possible to cut magnetic paper with cricut joy?. I realli wanna do this manetic bookmarks!!!
@CorinneBlackstone9 ай бұрын
I have not tried it. But I tinker if you used a thinner magnet maybe it could.
@Lilredknitahood Жыл бұрын
Is there an Amazon alternative to the printable vinyl? Will sticker paper work?
@CorinneBlackstone Жыл бұрын
You can use any kind of printable sticker paper or vinyl you like
@samiolson9538 Жыл бұрын
Can you use glossy sticker paper to make them shiny instead of matte or would I need to add laminate to the sticker sheet before I cut them?
@CorinneBlackstone Жыл бұрын
You can use any printable product you want to. You could laminate them or not.
@helensonnichsen1173 Жыл бұрын
They are so fun to make.!
@ginaodonnell1495 Жыл бұрын
How do you find the pemium products, other than Smurfs?
@CorinneBlackstone Жыл бұрын
You can find more premium designs here www.creativefabrica.com/premium/ref/236877/
@rosabellred12365 ай бұрын
Very helpful
@brendaleister60587 ай бұрын
Love the way you explain things! Thank you!
@CorinneBlackstone7 ай бұрын
Thank you so much!
@rosanneheller6584 Жыл бұрын
Hi Corinne. I wonder what other premium files are available. All I found was Stranger Things. The only way I found Smurfs was through your link. How can I find the other premium files? Please and Thank you.
@CorinneBlackstone Жыл бұрын
You can find more premium designs here www.creativefabrica.com/premium/ref/236877/
@rosanneheller6584 Жыл бұрын
Thank you so much. I have followed you for so long and you never fail to provide content that I enjoy. @@CorinneBlackstone I followed you before you reached your initial goal.....Thank you so much.
@nikkihoffman2891 Жыл бұрын
Corrine, I need your help desperately! My HP ink jet printer does not have a manual feed and the Cricut sticker paper jams in the roller. What ink jet printer will accept the thicker Cricut sticker paper! Help from Central Florida!
@CorinneBlackstone Жыл бұрын
Epson but you’re better off not using cricut sticker paper. It’s not a quality product.
@nikkihoffman2891 Жыл бұрын
Thanks, Corrine.
@jeangrandy867210 ай бұрын
I am so upset!!! I have tried printing the book marks 3 times and every time it prints the one side backwards & upside down!! I am doing exactly what you said. I am flipping the image horizontally and then rotating it 180°. I do not know what to do to fix this. It is driving me crazy. Any suggestions please?
@CorinneBlackstone10 ай бұрын
Instead flip horizontal then vertical should print the right way. Without seeing the design it’s really hard for me to tell you exactly what’s happening. Also stop printing it just look at it on the screen you can tell if it’s the right way or not on the screen. If you want to show a picture join my Facebook group facebook.com/groups/corinneblackstone
@jeangrandy867210 ай бұрын
Thank you, I will try that tomorrow!
@KQIS11 ай бұрын
Can you tell me please how to stop the printed vinyl from cracking at the top when I fold them? Thank you
@CorinneBlackstone11 ай бұрын
Use a different product would be my suggestion. I’ve not had any cracking with the products I use I have done these using Hayes, Neato and Starcraft
@KQIS11 ай бұрын
Thank you and I used White Glossy for Inkjet from Online Labels and I have had it for a few years now, perhaps that is the problem. @@CorinneBlackstone
@CorinneBlackstone11 ай бұрын
@@KQIS it’s possible. Things like that can dry out
@robinbeda8928 Жыл бұрын
I love this idea
@ashleydotson-clark4348 Жыл бұрын
Hiii
@gailberry3249 Жыл бұрын
These are so cute!
@jocelynhurd1719 ай бұрын
I just made some Bluey ones and they came out great
@CorinneBlackstone9 ай бұрын
I bet they are awesome!
@ladys702 Жыл бұрын
My canvas color won’t change and I have updated to windows 10 on my computer how can I change the color of the canvas that was a issue for me before
@CorinneBlackstone Жыл бұрын
Make sure you are choosing blank canvas in the bottom and then the really hard to see white square at the top
@ladys702 Жыл бұрын
@@CorinneBlackstone yes I agree the square is hard to see .Thank you for the information it does work now but shows half a box and is cut off . My layers panel is over is the box suppose to be half for the colors
@CorinneBlackstone Жыл бұрын
@@ladys702 no it’s not. Are you really zoomed in on your screen maybe?
@famous99 Жыл бұрын
Thank you! Have you tried creating bookmarks with words? When I flip... the words flip too.
@CorinneBlackstone Жыл бұрын
Words are a little tougher because they won’t line up exactly the same back to front. With words you don’t flip them
@famous99 Жыл бұрын
@@CorinneBlackstone Thanks! if I have an image + text then it won't line up... I guess I'll have to come up with images I want to use so I don't have to run into this problem. Oh and I love your book choice ;)
@CorinneBlackstone Жыл бұрын
@@famous99 they will still work as long as most of the magnet lines up. I did a reel with this design and I didn’t flip the one and that magnet bookmark works fun