How to make a polly wire roller from a bucket. Drill powered

Make a wire roller using a drill and a bucket. This is made for polly wire but works well with any type of string or line. Easy to make and takes about 10 minutes. This can hold about a mile and half of polly. Roll up polly wire fast with drill and a bucket.
here is a link to the polly reel that I like the most and some polly wire
REEL amzn.to/33T0h2W
POLLY WIRE THATS GOOD : amzn.to/3rWR3dZ
MY FAVORITE POLLY WIRE : amzn.to/3o4gSaA

[@heartbeetsfarm2540]

excellent. This was just what I needed.

[@codyreed9795]

Hell yeah!

[@BenHuxham]

Text version to accompany video. # Electric Fence roller - 5 gallon (22 litre) bucket - 17 inch (432mm) of 1 inch (25.4mm) ⌀ pipe - 1 ⅜ hole-saw (35mm) - pipe cap * 2 - pipe glue - bolt 2 * pipe cap length - 2 lengths (2 * bucket ⌀) * Drill holes in bucket (centered) * Cut sliver out of side of bucket just inside ends of bucket * Tighten bolt inside & outside of 1st pipe cap * Glue pipe cap with bolt to pipe length. * Fix bucket to planks, planks parallel with slot in between, opposite direction to plank lengths. * Insert pipe into bucket. * Fix second cap to pipe under bucket. *Do Not Glue* * Attach drill, rewind tape.

[@farmdude]

Pretty much sums it up.

[@jimnicholl6257]

,