A video explaining the process i use to build roof racks for my custom diecast cars. Enjoy!
Пікірлер: 117
@LegionOfWeirdos7 жыл бұрын
I truly don't understand how this video has 51 downvotes. It's a decently executed tutorial, does exactly what the title says it'll do, with no clickbait and not crappy soundtrack.
@BeardCinema Жыл бұрын
Nice job buddy 👍 I love the final result with the decals on the trunk ❤
@areyouavinalaff8 жыл бұрын
apply glue to the boards using the stick instead of trying to drip it out of the tube. you got blobs of glue there, and a stick to use as a spatula. dip stick in blob apply to board.
@areyouavinalaff8 жыл бұрын
end result looks cool though
@AlejandroGarcia-zn1gd6 жыл бұрын
que
@SultanTuner18 жыл бұрын
thanks a lot. it's a beautiful custom!
@Lukkye17 жыл бұрын
hey Sultan Tuner
@chuylopezperez99267 жыл бұрын
Sultan Tun en el mundo er
@SultanTuner17 жыл бұрын
hey que hay amigo! ✌
@painkillersclan7 жыл бұрын
loved this custom rack idea. totally am making a 56 nomad surf wagon and lo and behold a custom wood roof rack tutorial... couple things i noticed. i think the balsa wood is perfect, couldnt you lay out the rack pieces using extra cuts even longer then the rack pieces as spacers> for example, lay out your rack pieces with spacers all touching nice and straight on your work surface THEN sticking the tape to them, and then pulling the "spacers" out leaving perfectly spaced and aligned racks. And trick i learned from a ribbon award winning ww2 airplane diorama modeler? when using glues and small pieces, use stick pins/toothpicks/tacks/nails to apply precise amounts of adhesive. also you can use a drop of glue on something disposable(i use bits of pop cans) and draw a small drop onto a tool tip, you have plenty of time to do small things and can add new glue to draw from. now im off to build a board rack for my nomad, Thanks for sharing ;)
@dienerfive26937 жыл бұрын
the sticker bombing on the back looks so sick! beautiful Datsun!!
@undercoverwookiee66868 жыл бұрын
Very nice "beach look" Nissan! I would suggest making a roof rack smaller, as most of them don't go all the way across the roof :) I own an 82 Volvo 242 sedan (2 door) and I have a Thule rack that starts just in from of the sunroof and ends right behind the middle pillar. Nice tutorial!
@xiomarafeliciano86277 жыл бұрын
your fingers are doing team work
@makurossuuu7 жыл бұрын
This really helped thanks!!!
@mirc94277 жыл бұрын
brush extra thin cement on, its not as messy as the super glue
@user-eb7xb3mz5u6 жыл бұрын
WOW that is simple and nice custom!
@MossRods6 жыл бұрын
김준 thank you
@seregahv75316 жыл бұрын
Интересно, что у всех иностранцев одинаковые скальпели. Я не видел ножичка, или лезвия заточенного полотна, или медицинского скальпеля. У них какой то стандарт. У меня куча разных острых предметов и все идет в дело. Такое чувство что все там делают одно и то-же по какому-то стандарту. ))
@ethanlin57457 жыл бұрын
Good job!! Looks great with the Datsun
@AllFunCars7 ай бұрын
Very nice
@TiberianFiend6 жыл бұрын
You should use a grey wash. Lumber turns grey as it weathers.
@djiweb4 жыл бұрын
Great video
@masterblassster8 жыл бұрын
thanks for sharing! cool technique!
@Kevin-ev7hw7 жыл бұрын
BM use a toothpick to dab your glue. you have more control with the point of the toothpick. I love your idea good job.
@Torpedomtb7 жыл бұрын
Suggestion: Instead of trying to put micro drops of glue on each wood slat, just put glue on the metal bar then place it on the wood. Realism Problem: Generally the metal bars go from left to right on the car and the wood slats go front to back. However very nice touch.
@MossRods7 жыл бұрын
I sometimes use a pin and some glue but the glue i use dries fairly quickly so I dont do that often, as for the bars you are right and I have been playing around with the correct way as you mentioned, It just depends on what i think looks better on the car.
@asaduaratus6 жыл бұрын
nice tutor, thank you
@dailyawesome32675 жыл бұрын
How do you make the accessories on the rack?? I need to make a gas can and I have no idea how, and there is no tutorials for it!
@MossRods5 жыл бұрын
I havent made a cas can and that's because there are quite a few you can scavenge off other vehicles. First thing that comes to mind is the Johnny lightning fj40. There are others but they aren't coming to mind just be on the lookout. As for the parts on the rack, the surfboard is from the deora 2 by hot wheels, the blanket is rolled up ribbon, the suitcase is styrene shaped to the case portion with a small strip for the handle. Finally the cooler is styrene with a small piece of round styrene bent to the handle. It was painted then used some dry transfer decals for the logos.
@dailyawesome32675 жыл бұрын
@@MossRods k thanks!
@goddlee47068 жыл бұрын
You earned a sub buddy keep it up I'm gonna make a video on my collection of diecast cars
@Anunknownchannel-zg6cj7 жыл бұрын
I was tryed this method roof rack to add in my muscle or armored toy cars I hasn't got stick or wood I was tryed with paper clip I only got paper clip but the method doesn't work anymore I don't know to add it help?!
@dapati12576 жыл бұрын
Good video
@rodeskelson41596 жыл бұрын
I hope you get a tripod your work is cool, just tough to watch it wiggle around so much.
@chickenhawk828 жыл бұрын
killer datsun !
@Bigbadsmallcars8 жыл бұрын
looks great
@ferrazbrother8 жыл бұрын
very good !!
@carweirdogamer28926 жыл бұрын
why does he not like ediding i love it
@calebv32856 жыл бұрын
woah dude when you cut that paper click i heard a HUGE echo, plus what room are you in?
@gamer444vlogs97 жыл бұрын
Do you have a tutorial for that car
@bluecatdiecast75207 жыл бұрын
Good stuff!
@RenatosilvaMinis-Games7 жыл бұрын
TOP DE MAIS
@dukelemans97327 жыл бұрын
this is great; thx for this!
@recklessmohazu8 жыл бұрын
this is a cool craft. what size are those wood strips?
@MossRods8 жыл бұрын
recklessmohazu .0208" x .0625" bass wood strip
@gurupatel97478 жыл бұрын
Hey mate! I liked the paint job on the back of the car.. How did u do that graffiti effect and all?!
@MossRods8 жыл бұрын
for the sticker bomb effect on the trunk I used dry transfer decals that I bought at a hobby store, they are used by model railroaders. I found a sheet with racing decals and I used those.
@omagato47028 жыл бұрын
Beautiful Datsun, ¿How did you paint it?, ¿With Normal Paint? i think you paint it by hand because of the contrast. I want to make a Datsun like your`s but i dont one to screw up my datsun. I want to paint it with normal paint i dont want to open it, soo please make a tutorial if is a way to paint a car with Oil paint is the only paint than i now than can stick to the car.
@MossRods8 жыл бұрын
+OmaGato I actually used a pretty fun technique while painting this, used spray paint for most of it, I used a rust red/brown base coat, let it dry, and then i dipped it in a snow bank then i sprayed gray and put it under a heat lamp and let the snow dry so the paint would wear off and leave a patina look, its similar to a salt chipping technique. finally for the door and hood i used brush paint to create a "poorly done" look to complete the ratty look.
@lakyngamer33847 жыл бұрын
Moss Rods xd
@jmaheartsnra7 жыл бұрын
Dude, this is really nice. Are those wheels custom?
@MossRods7 жыл бұрын
jmaheartsnra yes, if you go over to mycustomhotwheels.com Alex posted a tutorial on how to make these wheels. you might have to dig around a bit because I think he posted it a year ago
@Souza455 жыл бұрын
good job, muito legal!
@stefanbl92636 жыл бұрын
What are this for Wheels ?
@flat6gamingyt6434 жыл бұрын
Do a roof box next
@A.S.B11927 жыл бұрын
I'm just getting into restoring hotwheel cars also and Is their a difference from the diecast cars and the hotwheels?
@MossRods7 жыл бұрын
Diecast is the process that hot wheels, matchbox, corgi, greenlight, etc are made. Diecast is just a general term for model cars that arent plastic basically.
@A.S.B11927 жыл бұрын
Moss Rods oh ok thank you.. and love the video
@finn23047 жыл бұрын
What is the datsuns full name in the video? I want to do a custom on it
@MossRods7 жыл бұрын
Finnian Pirosch hot wheels datsun 510 bluebird
@finn23047 жыл бұрын
BMoss thanks man
@creepergaming32806 жыл бұрын
Can you use match wood from matches
@MossRods6 жыл бұрын
Ink Bendy Gaming match wood is too thick for 1/64 maybe for larger scales. For 1/64 you can try cutting them in half lengthways. The scale lumber I use is only about 3 dollars a pack so I havent tried anything else
@johnazza91987 жыл бұрын
How did u make the top accessories
@MossRods7 жыл бұрын
Volksy Chopped suitcase and 7 up crate are made of styrene, the blanket is just fabric rolled up, and the surfboard came off a hot wheels car, deora 2 I beleive
@stinkypodracer72106 жыл бұрын
I really like the car which one is it
@MossRods6 жыл бұрын
StinkyPodRacer datsun 510 by hot wheels
@mr.sandman53118 жыл бұрын
An easyer way of putting the glue on the wood would probably to use some of the wood left over wood with a little bit of glue on it, but I've never done this so can't say for sure. you know what I'm saying right?
@johnmolina56798 жыл бұрын
Hi can you make a video on how you made your rims on the datsun bluebird thank you
@MossRods8 жыл бұрын
hello john. please check out Manga Garage on youtube, they posted a video explaining how to make them and that's how I learned to make them. Thank you
@scalecarmodeling36778 жыл бұрын
+BMoss i came from that video)
@ScottDunlap420bd7 жыл бұрын
cool. subbed.
@Dj_Chunga7 жыл бұрын
How you make the red towing hook?
@MossRods7 жыл бұрын
Carlos Garcia that was a scrap piece of red electrical wire bent into a U shape and glued in place
@Dj_Chunga7 жыл бұрын
BMoss thanks for the super fast reply, I'm gonna try to do it I wish I could be so good with the hands like you 😞
@Smyrill_18007 жыл бұрын
thx bmoss i made rat rod hotweels '71 510 wagon
@braydengreenwood93477 жыл бұрын
can I buy this from you
@sil.o757 жыл бұрын
Howd you do that paint?
@MossRods7 жыл бұрын
WISKEY Games I actually sprayed my base coat, which is rust colored, then let that dry, then stuck the car in a snow bank, blew most of the snow off then sprayed it gray, as the snow melted it exposed the rust underneath. a similar technique would be salt chipping which there are dozens of tutorials on youtube about that
@sil.o757 жыл бұрын
Cool, I have this same model and was just going to paint it a military green with two white stars on the doors, but then I saw what it looked like with rust. Good job!
@rydergxc1256 жыл бұрын
Could you use popcicle sticks?
@MossRods6 жыл бұрын
Ryder Griffeth I wouldn't recommend it. The scale lumber is cheap enough where you can get a pack for less than 2 dollars but if you want to then I'd use the tools shown in this video to make the small planks. I dont know if it would work as well with popsicle sticks as the wood is stronger than balsa. kzbin.info/www/bejne/fmPQnYeXrNZ8obc
@SanshokuCustoms6 жыл бұрын
Great job but, Tweezers will help my friend, tweeeeeezers
@skullph_ker7 жыл бұрын
BMoss what car did you use?
@MossRods7 жыл бұрын
ElegantDucky Vlogs hot wheels datsun 510
@skullph_ker7 жыл бұрын
+BMoss thanks man!
@user-yo4sc9gs9i5 жыл бұрын
вообще молодец
@egemen53724 жыл бұрын
How to make accessuar
@azamgp7 жыл бұрын
The knife was a Exacto knife
@marceline49357 жыл бұрын
azam md ferdous alam *x-acto
@jamescorvus82317 жыл бұрын
tweezers would of helped
@ralphyboy16495 жыл бұрын
Would have looked ok if it was made properly, instead of just sticking it to the middle of the roof.
@5cbst7 жыл бұрын
Woof that poor datsun looks rough
@kasey426 жыл бұрын
I think the paint job is supposed to be some kind of rat rod.
@f4bolamaisum7867 жыл бұрын
hako-sky ! 😰
@leon02477 жыл бұрын
Yea y waist ur time breathing huh wtf?? sometimes its better to not talk 4 the guy who ask y??
@jeyoarizky7 жыл бұрын
ab plat jogja
@lakyngamer33847 жыл бұрын
I'm kid ah hi I guess
@user-yo4sc9gs9i5 жыл бұрын
уууууууууууууупс
@agunga.r12687 жыл бұрын
Ge0
@edgarkenaialcantarahernand15137 жыл бұрын
mada faka san beche
@PopcornBleach7 жыл бұрын
why waste money on a toy no offence
@MossRods7 жыл бұрын
Clorox Bleach I don't see it as a waste of money, and it's fairly cheap. I only paid 25 cents for the car and with paint, wood, and other parts it probably only cost about a dollar 25
@PopcornBleach7 жыл бұрын
my aploiges sir i was wondering how to i get the right size of hot wheels car and also what car is that and how to did you get that paint job thanks Clorox bleach
@Torpedomtb7 жыл бұрын
Plenty of things people waste money on.. Everyone has their vices..