How to make a Smart Air Conditioner at home

Make an Air Conditioner at home
My Website- techboystoys.com/
Required Materials-
1.Forex Sheet
2.Blower x2 - amzn.to/2IP0cS7
3.Peltier Module x2 -
* Normal - amzn.to/2KYGWOA
* Standard - amzn.to/2GSE6bD
4.CPU Fan Cooler x2 - amzn.to/2kuyo6Y
5.Heat Sink x2 -
* Normal - amzn.to/2ksvWh6
* Standard - amzn.to/2KYIDvq
6.BO Motor x2 - amzn.to/2LBd2AS
7.Temperature Metre - amzn.to/2ktnOx1
8.LED Strip - amzn.to/2GUf5wv
9.Heat Sink Paste - amzn.to/2saPZ7Z
etc.
Follow me- / techboystoys
Music by-
1.Ladybug
2.Firesong by Kevin MacLeod is licensed under a Creative Commons Attribution licence (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
3.Trapped

[@techboystoys]

Thank you so much for Watching Here is my Second Channel-kzbin.info/door/uV9MyzRjEKLgcjAz0rRzhg?view_as=subscriber Don't forget to subscribe I need Your Support, Thank you Again

[@powerpoint2219]

Can i buy this .. And can you make me this please.. 💖💖💖

[@spfamilyremixmrrsanftmrrph4954]

TecH BoyS ToyS 😇

[@RAJKUMARSHOREY]

Can you make for us

[@kapilraza]

I am interested for buying pls contact me in my e mail I'd [e-mail]

[@yeasermahmud1842]

I want to buy this item... knock me [e-mail]

[@tonyyes2491]

So the hot air goes into the same room that your trying to cool ?

[@virgyc6974]

It's what I was thinking on!

[@JanSeewald]

correct, thank you!

[@awaisahmad5908]

Yes you are right for cooling the hot side of tec The use of water block Heat sink is best with water radiator drainage

[@Princeraj-ec3pk]

🤣🤣😂😋👍👍

[@TheMetheman1]

You could put this in a window... Seperate the hot and cold sides, have your hot air dumped outside and then your just circulating the same air cooler and cooler... Shouldn't be to hard

[@Rybagz]

The only good thing about this is the moving vane at the bottom. Given the "cooler" doesn't in fact work, I'd suggest you put wheels on it and repurpose the device to pick up dog turds in the backyard.

[@byebye9785]

Almost, it'd be fine for blowing cool air at your face, but you need to duct the warm air outside to achieve room cooling and collect and dispose of condensate to reduce uncomfortable humidity. As it stands, you're just slightly heating the room up. If you're after ductless air conditioning, with something so small you could probably use water heat exchangers and dump the heat into a domestic hot water tank. The downside is you'd have to collect and store/drain condensate rather than evaporate it on the heat sink and blow it out the exhaust. Peltiers are cool (no pun intended), but there are also other possibilities for home made air conditioners, such as stirling coolers or turbo expanders.

[@dagoberttheseus1291]

Vee Eight Thank you for succinctly stating the problem with calling this an 'air conditioner'.

[@realsabuj]

It is just like fun...there is no ventilation process in your machine... And also two peltier module are not enough to cool the circumstances...so it will be totally useless...

[@Tamil649]

Fact

[@lovepakistan5480]

What about hot side????

[@ag6371]

One way to improve the efficiency of the Peltiers is to make water blocks and place them on the hot side. Then add a water tank and pump and make a radiator using copper tubing to take out the heat. Put the tank, pump and radiator in your own realistic condenser unit!

[@mauri4599]

Quedó hermoso, felicitaciones muy buen trabajo.. Saludos desde Argentina

[@supriyakhambe877]

Excellent! nice work! 🙋

[@arrowstheorem1881]

The heat does not go away, it's still inside the room. Total Energy is still the same

[@miekkb]

nope, total energy differs since the peltiers, blower and what not is running and working...if the heat not pumped out, the root might get even hotter

[@Cheese_1337]

the thing is, you need to seperate the hot and cold side. hot side should be outside :D or hot air duct to outside.

[@exitsalidaexit]

true

[@Sparkplug023]

That is soooo neat.

[@tapgo3054]

Amazing,thanks for sharing

[@degu44]

An excellent project However I noticed 4x 6 amp peltiers (total 24 amp) and the power supply looks to be to 10 amp? Where is the temperature sensor placed to get those readings? The heat exhaust is venting in to the top of the box and the small air holes would be insufficient to move the volume of air the fans need. So it would become hot and ineffective.

[@slendgamer895]

It would be ineffective even if it had bigger cooling holes because the hot air stays inside his room and considering that a peltier cooler always creates more heat than cool air due to inefficency of converting the electric energy entirely into the heat exchanging process, it actually heats up your room. This is a scam.

[@degu44]

@@slendgamer895 I agree totally .

[@rodelminlay4773]

@@degu44 3

[@degu44]

@@rodelminlay4773 3?

[@karzankerkuki4935]

hot side were go ?

[@Amuzic_Earth]

I must say the finish and finesse is excellent. And it will work good as an outside personal air conditioner. For inside though, please come up with a good vent out design for the hot side.

[@misserrisylisbone2415]

Very nice project...thats awesome

[@soundblaster2291]

You blow cold air thanks to the Peltier module but generate heat in the same room. Viewers please don’t waste your money, this is stupid design

[@CoffeeandCancerStix]

A small modification to the design would allow you to vent the hot air out a window.

[@networkingtuter1137]

Yes

[@bryleyey3149]

Vent hot air outside the room. Dont waste your brain. Use it

[@MichaelFlatman]

@@CoffeeandCancerStix still the peltier is about 1/4-1/3 as efficient as a compressor

[@CoffeeandCancerStix]

@@MichaelFlatman agreed, I just meant the excess heat doesn't need to vent into the room. For the time and money invested here I would say a box fan and a window would be just as effective.

[@vimal01in]

There is no venting of heat generated by the peltier... . how come will it work if you are not venting the hot air...the heat. Will remain in the room.

[@bharatnamej5176]

Yes

[@tehseenahmed8722]

Beautiful homemade design ever..

[@TechWayTamil]

Super brother useful information please share wiring deatils

[@aloklakhera866]

What exit plan for heat? In room itself!?

[@Voice.Of.Nation]

hey bro ...where will go peltier hot side air?

[@mohamedmoktar9502]

same question?

[@marcustrust9449]

amazing design. Making one at the moment with 4 70W peltier modules that are water cooled on both the hot and cold sides.

[@slycutter7]

lmfao. that funny swing. xD

[@ahmedabdelrahman829]

Where will the hot side heating go? This will not work friend

[@techboystoys]

Just put the ac on window

[@ahmedabdelrahman829]

@@techboystoys Good idea

[@ex-soldier4341]

How can it cool u when its outputing heat too at the same time the hot and cold air will just fight each other:)

[@ottakkannan_malabari]

Can you tell me please what is the temperature both side of pelter cold side hot side please please

[@ProjoTech]

Wow it fantastic

[@MusawirDayo]

It will generate more heat than cooling..

[@multiomer1997]

And this is why global heating is a problem. Everyone tries to make their cheap AC. I buy last week a LG 8 Kw to cool my house. Thats efficient. (Compressors) but the peltier is shit. And ineffcient...

[@MrNanath]

How can it cool in less time without compression of air ? 12.5Deg c is it real .? With just Two motor fans and taking air and circulating in the same chamber how temperature is reduced?

[@rosariobonafede2350]

Awesome, well done. Would you mind sharing dimensions for box!

[@challamalakonadaiah182]

Super hit mind blowing wonderful project thank were much to showing this veido

[@HameedBangash]

AC ca be made using peltier, 100% possible but would require 56 peltier (12706) surface conduction area approximately 200 square inches , its performance will meet 2 Ton AC. 01 (12706) peltier takes 3.5 amp . 56 will take 196 Amp 56*3.5=196*12v=2352 watts and 200 Watts for blowers, total load 2552 Watts. However thermal insulation is critical point. it will obviously save energy with smart and quite design, no noise, no starting heavy current, no motor induction losses and no wear parts. it will roughly cost 250$ in Pakistan, India and bangladesh

[@cosmefulanito5933]

Nice AC for ants.

[@TRAZExYT]

lmao

[@scienceboy2410]

Really so nice...... You are very intelligent.....

[@rozhiyakmohamadi7055]

how cool!!!

[@uf9927]

Thermodynamically it is impossible that it is cooling the room (with source and sink in the same room). I can't believe anything after 03:50.

[@mcaddc]

The design as shown in this video is faulty. The top fans are blowing downwards on the hot side of the peltier. There is no escape for the hot air, so it will just cancel out the cold air coming into the room. The hot air must be evacuated if there is to be any sort of real cooling. With a few mods, this will work as a great tent air-conditioner for a tent while camping, using solar power, batteries & a small generator. I would use a few more peltiers and duct tube to vent the hot side gasses to the outside.

[@deinemutterderbreite]

Wow best idea

[@omsaikrishna8354]

mast banaye bhai.... excellent!!!!!!!! 🤔🤔🤔🤔🤔🤔🤔.

[@notthesamagain]

And the hot hair gets stuck in the box doubling the effort e possibly the consumption of energy with half the efficiency. 🙄

[@krishnakrishna-dj3rw]

please explain all parts names and slowly explain fitting pls

[@nipontammasalee2334]

Good it beautiful.

[@paranijaajaa758]

nice finessing

[@yashdpatel2599]

How much power supply (volts and amp) do you give?

[@muhammadazam743]

Agar Ap se mangwana Ho to kitnay ka milay ga

[@msnhaart9844]

Cool👍👍👍

[@anasmashhouer3185]

and dose it works to coolthe whole roomand how much time it take thanks

[@zaprodk]

The only thing this machine will do is heat up the room. Useless and faulty by design.

[@mamunahmed1769]

Where did the hot air go? Cos peltier got one side hot and other side cold

[@richlaue]

That is my thought, we are generating cool air that we send through the cooler.

[@SANTHOSHKUMARAME]

Thanks for video sir ..sir Pls wire connection pls need explanisation.. 😍

[@jordannasreddin3615]

Hey! I have a van and would like to make this, can it be done for 12v power?

[@Smokr]

LOL Next video show them the deluxe version that uses trays of ice cubes.

[@BannerT20]

Plzzz sir...you should make be videos of with name of objects...

[@techboystoys]

Sure my friend

[@ravicg8298]

See in the description everything is mentioned

[@hackerkingpakistan2561]

i love it tech boy toy

[@sambriestly8132]

Wowww.nice

[@tobiaswittenmeier1877]

Cool look but technical nonsense...Its a nice heater

[@davidbubenik4515]

People not understand termodynamic :D He making more heat then "cool"

[@9h-06elangbagaskaraputra9]

Ye he should make a outdoor unit too

[@ralphmadera4366]

Matter neither can be created not destroyed, heat is matter, this means that you need to remove the heat from the room to the outside and this process eventually will make the room lower its temperature 🤒. In the US you can go to any store and get a 5,000 BTUs A/C window unit as cheap as $80.00 dollars. Don’t waist your money or time in this garbage 🗑, there is not way this contraction is gonna work when you have both cycles repeatedly in the same area , heat and cold continuously.

[@campanariodiademaadbsetor2607]

100sacional meu amigo, ideia sua vale 2.000 likes sem questionar muito, brilhante ideia.

[@arabigamer1018]

nice video i love it bro

[@MesterElg]

Frome 30° to 13°? Sure... Harry Houdini from India :-)))

[@LabEEEbd]

it is fake bro .

[@36Gadiya]

भाई तोर वीडियो के काम पूरा हो गए होही ता येला घर भेज दे भारी गर्मी हे

[@lakshyakashyap803]

36Gadiya yehu ha chattisghariya habae ka

[@ChandanRay]

เป็นไปได้ไหมส่งบ้าน 1 หลังหลังจากที่ 36gadiya สามารถรับได้

[@36Gadiya]

Chandan Ray bhai tujhe kya hua Thailand pahuch gya kya

[@36Gadiya]

Chandan Ray bhai tujhe kya hua Thailand pahuch gya kya

[@lakshyakashyap803]

Bhai ap btao ye bhi hamare chattisgarh se h kya

[@polzchannel9784]

Tjakepzzz 👌 👍 Very Cool

[@alwinjoy8374]

Great idea to make a smart ac nice

[@eldorado1150]

and where the hot air goes? inside Air Conditioner!!!

[@gabrcatt]

infact it's useless video , peltier is only usefull if the dissipation go trough liquid cooler, and the radiator is out home (better buy a normal conditioner)

[@deinemutterderbreite]

Crushmania die Wärme wied auch abgekühlt lul

[@eldorado1150]

Die Wärme kehrt in den Zyklus zurück. Dies ist ein physikalisches Prinzip. Obwohl du dich davor cool fühlst

[@deinemutterderbreite]

Ich weiss Wärme steigt nach oben also wie sie nicht so gut abgegeben und oben gespeichert

[@avalonpark5319]

If you add Arduino board and IR sensor, this might be the real air conditioner

[@MuhammadRizwan-rh2bm]

Nice work bro

[@waseembabar1981]

well i wasnt looking at the product coz i was observing that how clear, neat & finished work you doing well done (Y)

[@djalmada]

So if I sell you a useless (but pretty) turd you will buy it?

[@MrRuizi]

Peltier cell heating air in one side and cooled air in the other side. In the room two air flow will mixing. This result in nothing.

[@ag6371]

Mount on a window or duct the heat out

[@ImmortalShiro]

Of course, make the hot side 'ducted' out of your intended space to cool.... Have you seen how window type ACUs installed?

[@HunsV]

Too weak to do anything even if you didn't have that to worry about

[@davidbubenik4515]

People not understand termodynamic :D

[@aakashroy2501]

True

[@dushand5790]

I have a question. I also made a water cooling Perrier air conditioner, but asap dc fan in to draw the cold air is turned on the peltier temp start to go back up on the cold side . What ami doing wrong?

[@santiagoboorman484]

Great job! Just one question: There is condensation, you dont show how you manage that. It will drop water...

[@loughkb]

You're just moving heat around inside the room. Not removing it. Silly waste of energy.

[@alijohar7862]

What is the price

[@zEnergy256]

Look at the size of it according to size price should be like 905 or 869

[@carloisdoingstupidtechstuff]

Should it be more cooler with an outdoor unit with a refrigerator compressor and refrigerant?

[@navin880]

What kind of power adopter u used for fan..12v or more higher than?....is it possible to reduce the ambient temperature with parts?

[@NullaNulla]

Pointless when you are generating heat as well (equal and opposite reaction).

[@LabEEEbd]

fake temperature gauge. But good try

[@jm036]

Its probable where the peltier module is.

[@sciencekingdom2322]

What did I do to use to join dem not 3d printings

[@aliextreme019]

Best video I've ever seen.

[@nomadbound9610]

THIS IS NOT A AC. IT IS A OVERPRICED FAN THAT USES SMALL COMPUTER PARTS.

[@zubagvatic]

Smart Air Conditioner = Glorified Fan

[@luckyrao6271]

beautiful

[@michaelefrenbuctolan4420]

Very nice. What rating is the power supply you used?

[@SanjaySingh-ho6yt]

compressor ke bina kavi be room thanda nahe hoga ...jo original ac me hota hai

[@mahipalsinghdhunna7655]

Peltier 12715 or 12710 . 2 no side use karo add one more thing hot nika ne k liye picha hol kar k pipe atch kar k room k bahar nikalo a.c jasa kam kare ga...me ni old cooler me add kar ne wala hu...

[@SanjaySingh-ho6yt]

@@mahipalsinghdhunna7655 app iska ak video banau

[@loveforever2749]

It is not possible without compressor and refregerent

[@illussiondark]

its possible but the design so many wrong, so yes its imposible to get cool

[@ChandanRay]

Comment dekhne par jayda maza aata hai... Ek number Bhai

[@MotoE-sn8pe]

Good work my brother carry on

[@alipouria5168]

Dnt work

[@DashzRight]

A huge mistake, the heat sinks must be outside the room, or this whole setup won't do a thing, just heat the cold air.

[@davidbubenik4515]

People not understand termodynamic :D

[@Pollo0531]

Beekibye hello, if i put the part of hot air outside the room, it works? Please answer

[@DashzRight]

Yes it does. Usually this system is placed in a window opened a little bit and using some foam as an insulator and support for the hot side of the device (the heatsinks and fans.)

[@BaterieCZ]

Beekibye Best idea what i've seen so far is to place water-block on warm side and use pc radiator to remove heat from system outside of room.

[@DashzRight]

Baterka thats effective only issue is that the water block will melt very fast, (the hot side gets very hot)

[@crosz_joe9161]

Super bro

[@kishor_anna]

Good... Can i get it from u .. this products

[@slendgamer895]

Your Air Conditioner is useless unless you channel the hot air outside of your room. A peltier cooler has a pretty low efficiency which means the electricity you put in it can only exchange some of the heat on the one side to the other, the excess electricity is converted to thermal energy on the hot side, which means it actually heats up your room rather than cools it. Yes, it shows a lower temperature on the thermometer, but thats only because it measures the temp locally in the unit. If you would measure in the room, the temp would rise over time.

[@ACHVACTAB1]

"Air Out" means air outside !!! Which means duct it outside , which means those fans can't handle that !!! BUT the idea / science beats watching Tv for the curious !!!!

[@slendgamer895]

I didnt quite get your point, but sure...

[@tobiaswittenmeier1877]

And just another room heater...

[@aswinvijayan602]

I like it very much good bro

[@yaakovpalkar8927]

Hi this a very nice idea

[@user-zd9dh3pv8r]

Not practical!! Low air power and more heat than cool

[@riturajrath6288]

wasted my time to watxh this video, no description and video like wind cross over from my head, 12°?? are u kidding? dont make fool to all people on utube, dislike from my side

[@Raghuram1992]

Fantastic and neat work bro keep rocking pretty informative and convenient as well.... Can it reduce the room temp for a small size room

[@AmanPandey-fg1yz]

Good job.. 👌👌 Classy look of the ac but only one thing confusing that where the released heat will go and if it will remain in the room itself then its just a showpiece...

[@sherkhan_5050]

Aman Pandey Watch closely, as he didn't mention, he made small holes(this is where heat will exit) at the back before closing with front panel. 3:22 Pause and watch it.