How to make a steel knot by Bending Rebar - Prusik Knot - Without HEATING - Metalworking Project

In this video, I make a Steel Knot by Bending Rebar, without using heat.
The knot is called a Prusik Knot
This knot will be used in a future Industrial Style project. I love the look of industrial-style furniture and rebar with knots fits right in with the look I like.
I hope you enjoy my video of the project, it was a lot of fun to make.
The main tools used were a Hammer and a bench vise.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load.

[@tomt9543]

WOW! You know of course, this makes you the champion of the world in rebar knot tying! You were definitely equal to my challenge! I’ve thought about this a lot over the past week, and I figured you might have to bend one turn on each side, then the second on each side etc. on account of interference, but you made it look simple doing one side at a time! I am in awe of your talents, and the fact that you use nothing more than an old bolt and a piece of pipe makes you all the more remarkable! Thanks for accepting and aceing my challenge! I’m inclined to challenge you to do a rebar monkeys fist next, but I know next week you’d have worked yourself to death, and there would be a new video! I’m just not that evil of a person though, so I’ll refrain from issuing that challenge! Thanks Gavin! You are truly remarkable!

[@GavinClarkdiy]

Thank you very much Tom, what a lovely comment I really appreciate it. Thank you for your Prusik knot challenge, I am glad you liked the finished product. I have put the Monkeys fist on my list and will have a play when I get time. (I have pinned your comment to the top of the comments list). Thank's again mate.

[@tomt9543]

@@GavinClarkdiy I’m pulling for you, and heat would be totally acceptable when attempting the monkeys fist! Stay safe, stay well! I’ll be watching!

[@migueldominguez6975]

⅔

[@muradalam6995]

Aa

[@dagobertomendoza7770]

ooooo

[@LawtonDigital]

While I'm mesmerized by your steel bending, it's worth mentioning the first rate quality of your videography and editing. You wasted not one second of my time and left me feeling like this is something I want to try out. Thank you!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@praveshmahbeer4048]

Dad, I've tried this, and you make it look a 100 times easier. Complete respect. You keep well 👌

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. Keep practicing, it is only time on the tools that makes us better. Thank you for your comment.

[@WayneWerner]

686 people were knot impressed. I was, though! Thumbs up from me!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. You are the one I wanted to like it. Thank you for your comment. Hahaha

[@valtar]

Позитивный такой человек, настраивает на доброту

[@GavinClarkdiy]

Большое спасибо, я ценю ваш комментарий.

[@PJMDValley]

As a SM worker, I have bent a few pcs of rebar in my time, but never a knot. Very impressive, well done sir!!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@disqusmacabre6246]

Came by accident, ended up staying for the entire video. Who knew I'd be fascinated watching you create this by hand... but I was. Nice video,. Thank you.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it and I appreciate your comment.

[@lindseysturkie2205]

I'm a wood worker not a metal worker but you sure have sparked an interest in exploring metal work.

[@rrad8106]

I love when I feel inspired by a video, and I feel inspired by this one! How incredible! Thank you for walking us through it!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@mohammadyosef3368]

to Tom : You are a special person, a professional and you love your job - so you passed the challenge

[@alexeyorlov9639]

I dislike dpecial kids

[@deanstreet8319]

Looks like the way to make a good hinge for a farm gate!

[@GavinClarkdiy]

It would look awesome on the gate.

[@revolverguy]

This would make awesome gate hinges

[@waynecvitan4714]

Love yor thought process and patience , a true tradesman that definitely puts the younger guys to shame

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@neiloconnor9349]

Great test of 3-dimensional reasoning.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@user-bw3tn6vx8l]

Отличная идея. Варю соседке лестницу и обязательно ей такой декор сделаю. Пусть голову ломает, как это у меня получилось. Спасибо👍

[@GavinClarkdiy]

Большое спасибо, я желаю вам всего наилучшего в вашем проекте.

[@kennethchapman8468]

What amazing job I've watched multiple videos that you have posted all of the amazing work.

[@cesarrodriguez5663]

✨ excelente ✨ 👏👏👏👏👏

[@Dronich2008]

Интересное решение. Я сразу и не догадался, что всё так просто )

[@GavinClarkdiy]

Спасибо большое. Да, многое можно сделать по-разному, все это очень интересно.

[@canusakommando9692]

It's awesome to see things done the old way. Brute force , pounding , it's true art. I do my knots all the time , it helps keep me sharp. You really have to think three dimensionally. I love this, thank you.

[@GavinClarkdiy]

Thank you very much, I agree with you I appreciate your comment, it is a good thing to have to think about what you are doing, not just straight cuts, I wish you the best for your projects.

[@Old52Guy]

I've never seen this before now. I understand the material. I understand the physics involved. I understand the process. With all that I still don't believe my own eyes. This is fantastic! Thank you for showing this.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it, I appreciate your comment.

[@sour_grapes4280]

This is the kind of thing that's stuck in my head all day.

[@GavinClarkdiy]

Thank you very much. I have many of these things stuck in my head all the time.

[@user-jg8zc1pk9v]

乖哦哦的

[@GavinClarkdiy]

@@user-jg8zc1pk9v 非常感谢你。

[@user-jg8zc1pk9v]

van我是爱

[@user-jg8zc1pk9v]

@@GavinClarkdiy than all like my friends.

[@flymachine]

This is why I love KZbin, just last night I was wondering how the hell I would tie a knot in rebar 🤔

[@GavinClarkdiy]

Hahaha now you know. Thank you for your comment.

[@minerblue9641]

Lol!

[@stewartmcmanus3991]

That was brilliant mate. Never seen that done before.

[@GavinClarkdiy]

Thank you very much Stewart, I am glad you liked it.

[@gawinanderson8632]

Can't believe I watched this to the end. Impressive work 👏🏾

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@kontr76]

Доброй ночи, два вопроса откуда у вас арматура не ржавая, и почему горелкой не нагреть, легче и ровнее загнется???

[@GavinClarkdiy]

Я купил их у поставщика стали здесь, в Австралии, я вручную отбираю сталь, чтобы получить лучшее, что могу. Я использую самые простые инструменты, если могу, поэтому не использую тепло, если у меня его нет. Спасибо за ваш комментарий

[@user-od5mx6uv5j]

Когда коту делать нечего он яйца лижет

[@GavinClarkdiy]

Если он не может лизать свои яйца, он сгибает сталь в узлы

[@Hertog_von_Berkshire]

Rebar Prusik: Something I never expected to see ... ever!

[@GavinClarkdiy]

Me neither, but it's nice to try new things. I made it because I was asked if I could. I will bend the ends up and make a hook, I plan to use two of these knots with hooks in a project with 1/2 inch rebar making a wall hanger for coats.

[@user-sm2cm9gc8n]

Ойлонуп көркөм жасалган буюм экен рахмат жигит сага

[@GavinClarkdiy]

Сизге чоң рахмат, жакканыңызга кубанычтамын.

[@user-zu6tw3yz5e]

Кевин молодец как будто верёвку завезал на узел красавчик.спасибо за идею

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось.

[@arnoldaltjr.2099]

I figured it out at about the halfway point. Very well done.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@john-giovannicorda3456]

And you protected your eyes from any flying metal chips. You are a good one to watch, Thank you.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment. We must always protect our eyes. Thank you for your comment.

[@J.Hunter]

Not sure why I watched this but it was awesome!!!! Great Job!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@FireoftheGreeks]

I'm totally amazed you did it completely cold, in awe actually!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@user-kz7vc7do9o]

Сделай пропил в тисках. Будет удобней. И горелка в левой руке тоже облегчит работу. Мне понравилось ваше трудолюбие, и творческий подход.

[@GavinClarkdiy]

Большое спасибо, я стараюсь не использовать тепло, если могу, разрез - хорошая идея, я ценю ваш комментарий.

[@LongGun223]

Bravo! I get why you did it. It's fortunate to learn from people like you. Glen from the USA

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it. Greetings from Australia.

[@MrWoinsveta]

Если не видеть как Вы делаете эти чудесные вещи, можно подумать, что они из пластилина или чего-то мягкого. Была бы возможность подписался бы на Ваш канал второй раз. Уважаю людей труда.

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось. Привет из Австралии.

[@MrWoinsveta]

@@GavinClarkdiyПривет из Москвы!!!

[@GavinClarkdiy]

@@MrWoinsveta Привет из Австралии.

[@evelyngorfram9306]

Bending rebar like it was licorice rope - wow. And the finished piece is a work of art.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@darodaro1368]

Nice design for a home made hinge and a lot of other projects.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. Yes it could have many uses, and look good in them all. Thank you for your comment.

[@wirelesmike73]

I keep picturing a balcony railing made of these rebar knots. Really nice work.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. They would look awesome along a balcony.

[@robertbutler8004]

I can't believe that I almost watched this video to the end I need a like!!!

[@GavinClarkdiy]

I will give you one, Thank you.

[@markissboi3583]

The Amount of springs ive made by hand & on spring machines 26yrs a springmaker - Springsteel leaf plate & rod heattreated right last as tools Its how i learnt to make the tools to coil & form special jobs was the key . This REbarb knot hes making - colletts I made to hold wire on mandril's & coil on lathe then bend on a dia acrow type bender But we worked 8hrs a day so making 1 these at home this was fun to watch a good job Gavin

[@GavinClarkdiy]

Thank you very much Mark, I appreciate your comment.

[@0johnny082]

that would make a cool piece of a gate hinge

[@GavinClarkdiy]

Yes, I agree it would look mean as a gate hinge.

[@user-mg9kq5yk5n]

Молодец. Занятная шняга вышла.

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось.

[@user-mg9kq5yk5n]

@@GavinClarkdiy удачи !!!!

[@harmandros]

How much do I like to watch stubborn old lads !!!!

[@GavinClarkdiy]

Thank you very much, Old guys having fun. Thank you for your comment.

[@user-rl8yj4fj2p]

Тиски как у меня 1952 года СССР.Арматура как новая у вас!Удачи в работе!

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось. Мне нравятся мои тиски, за эти годы они сильно пострадали. Спасибо за ваш комментарий.

[@robingibson7503]

AH HA!!! CLEVER!!!! Love it!!!!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@laythabdulwahab9498]

Excellent you are very clever thank you

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@StirlingVideoLounge]

Symmetrically perfection! The tiny adjustments are the mark of a pro. Fun to watch, thanks.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@kevintanner5307]

Just want to say that I am a welder Andy masonry and concrete I'm around rebar all the time using it that was one heck of a job true Craftsman good work Tom

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@sculptures6753]

Impressive.Thank you for sharing your talents.

[@gustavoserra5514]

Una obra maestra !!! 👏👏👏👏👏 Gracias por compartirlo! Saludos desde Córdoba, Argentina

[@GavinClarkdiy]

Muchas gracias, estoy feliz de que te haya gustado. Saludos desde Australia.

[@user-ng9hv7dt3j]

Приветствую!! Ты творишь искусство! Спасибо за видео, непременно повторю

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось.

[@ianmackay6586]

Brilliant stuff! It´s great when the video is as long as it needs to be and no more, but with all the essential information given clearly. Thank you so much- I´m going to try this in silver (not 7mm!)

[@GavinClarkdiy]

Thank you very much, I wish you the best for your project.

[@brianmax8147]

As a retired ironworker from Seattle ,I am glad i never had to tie rebar this way on the job . Tie wire is so much easier.LOL Nice job on the rebar .

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. Yes Tie wire is a much better thing to use. Thank you for your comment.

[@berthaduniverse]

Wow, never would have thought of using copper to generate the fulcrum point... It seems to work well with low diameter rebar. Thanks Gavin. I learned something today.

[@GavinClarkdiy]

I only used it because I had it here and it fitted well, I have since made a good strong bar for bending this small rebar and the copper was bending too much. Thank you for your comment.

[@crimipablo2242]

OMG! Simply amazing. I tried several times fighting on it with more or less success and i suspected it is a creation ocasion. Nice!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@toddcott9510]

Never seen rebar look so good. Well done.

[@GavinClarkdiy]

Thank you very much.

[@sunbladerr]

Wow! Thiss will make a beautiful and functional hinge or pivot for rustic projects. Thanks. Be Well and Good Journey Richie

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. I agree it would fit in very nice with anything rustic.

[@jonathanolsen7254]

Real Art work...

[@GavinClarkdiy]

Thank you very much.

[@Wum763]

Hervorragende vorgestellt ! Kannte ich noch nicht. Danke dir🤗

[@GavinClarkdiy]

Vielen Dank, freut mich, dass es dir gefallen hat.

[@jerrybradshaw9879]

As a 30 yr. union line clearance tree trimmer this is a knot I used every time I climbed. You had me scratching my head as to how you would do it….Great Job!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. I appreciate your comment.

[@garybrockwell2031]

Great stuff Tom, to be having 12 minutes of good common sense and not over thinking.. thanks 👍 stuff FROM LONDON 🇬🇧🆘

[@GavinClarkdiy]

Thank you very much Gary I am glad you like my work. Greetings from Australia.

[@ngocthotran5354]

Just an Iron tree but it is a work of art when you drop your soul into it. Congratulation !

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@mikekerr3242]

Brilliant, you make it look so easy.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@earlcavenaugh6459]

They craftsmanship! Great job Gavin!

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it.

[@nazroolhosein2251]

Appreciate your detailed steps

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@em-rg3xf]

Awesome, really enjoyed that, i was imagining how i would do it, and all my ideas were wrong. Still it was fun watching someone who knows what they're doing, achieve this. Look really good, thank you. And good luck to all the metal workers out there.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. It's a lot of fun doing these things.

[@evgenygolovan4753]

Thank you for lesson. Its beautiful. 👍🏻

[@GavinClarkdiy]

Thank you very much.

[@marcmacd2706]

Gavin, such a pleasure watching a skilled tradesman such as yourself.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@MrSerega422]

Удалой молодец завязал арматуру в узел. посмотрел весь ролик будет возможность тоже повторю )

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось. Привет из Австралии. Я желаю вам всего наилучшего в вашем проекте.

[@markgic.772]

Auctually, bending a 7mm rebar is more easier than 10mm rebar. I tried bending a 10mm rebar and faileds. I’m going to try it again until a 10mm Rebar Prusik Knot is made by me look really nice like your, sir.@Gavin ! Thank you very much for your videos, sir, mr.Gavin ! You inspire me so much !

[@GavinClarkdiy]

Thank you very much, I appreciate your comment. If you keep having trouble try using heat. Unless you see a flame in my video it is cold and not heat-treated in any way. But heat makes the bending much easier and there is less chance of the rebar cracking or breaking, heat is basically your friend when bending steel. I am trying to use simple tools and not use heat unless I have to in many of my videos. Some things will need heat to get the bend I need because it is too hard/big to bend or I do not want hammer marks in it. Thank you for your comment. I wish you the best for your project.

[@georgeraffield4466]

A good challenge Great job as always my friend thanks. Thanks Tom for the request.👍👍

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@tomt9543]

You’re welcome George! Although reading the comments makes me feel like I’ve created a monster! Ha! Stay well!

[@chebbahdjamel9459]

Superbe travail, tout fait main. Pas besoin de CNC, de lasers, etc ….du savoir faire, un bon coup d’œil et des mains en or. Bravo.

[@GavinClarkdiy]

Merci beaucoup, j'apprécie votre commentaire.

[@HotWaxArgentina]

esto es increíble!! muchas gracias señor!

[@GavinClarkdiy]

Muchas gracias, agradezco tu comentario.

[@user-1jz-gte_tt]

На 10 сек видео понял как делать эту головоломку!😁👍

[@smiles.69]

Really appreciated this video. It inspired me to try making a similar knot out of silver rope for a bail on a stone pendant. I used 4 loops instead of 6.

[@GavinClarkdiy]

Thank you very much, I like the sound of what you are making and wish you the best for your project.

[@andrewmcgee1876]

These would make really cool kitchen drawer handles!

[@GavinClarkdiy]

That would look nice!

[@timdurpos3298]

I work with bar everyday your giving me ideas

[@GavinClarkdiy]

Thank you very much, I wish you the best for your projects

[@1waukesha]

Your skill precision and patience is inspiring! Good job!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@joergwiesmann4261]

..big compliment !!!! I like YOUR exact work soooo much !!!! Kinde regards from Switzerland !!!!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment. Greetings from Australia.

[@Luis.Tidemann.r.34]

it's so perfect. Thanks

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@aleksa_natanke]

Спасибо чувак! Здоровья!

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось. Береги себя.

[@johnmorton7577]

I'm definitely scratching my head trying to think of all of the uses cabinet handles barbecue pit handles man you got my wheels turning Much love from Tulia Texas out on the farm 🚜

[@GavinClarkdiy]

Thank you very much, You will think of something, I wish you the best for your project. Greetings from Australia.

[@donaldnaymon3270]

Nice work. Great video. Thank you for sharing.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@dziggy3004]

DUDE! (mate) HATS OFF!

[@GavinClarkdiy]

Thank you very much mate.

[@popapoco]

wonderful job, really like what you did with simple rebar

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@juliocalderon3086]

Cuando un forjador de metal utiliza guantes ....es un TECNICO DEL HIERRO .....😉👍 Excelente ....muy buenoooooo.

[@GavinClarkdiy]

Muchas gracias, me alegro que les haya gustado.

[@juliocalderon3086]

@@GavinClarkdiy excelente video .....muy perfecto ....👍

[@alexandrefacciondesouza7744]

Awesome skill ! Thanks for sharing !

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it.

[@josedocarmosilva9957]

Não é fácil, mas não impossível. Parabéns.

[@GavinClarkdiy]

Muito obrigado, fico feliz que tenha gostado.

[@georgesever4347]

Excellent workmanship! And a good idea for rustic cabinet feature/hinge. This knot turned out really well!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@TSPhotoAtlanta]

Mastery! It's always gratifying to watch a good skill, and moreso when it's full-on ROCK'nROLL!

[@TSPhotoAtlanta]

I'm just willing to bet you could do a sheepshank or a monkey-ball (monkey-fist in some jurisictions ;) )

[@GavinClarkdiy]

Thank you very much, I appreciate your comment. I have looked at doing a monkey-fist and have it on my list, but other than faking it (cutting bits and welding them), I don't think I could do it, I have put your Sheepshank on my list now too, I will have a think about it, thank you for your suggestion.

[@argoscerberus]

thank you Tom ;)

[@donaldlapress7061]

You are a true craftsman! Keep the videos coming; I will keep watching!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@KnowstheFuture]

Captivating..enjoyed it...didn't know you could bend that far without heat.

[@GavinClarkdiy]

Thank you very much. Sometimes they want to crack, and you can never bend it back too far if you over bend it. Heat is always the answer, if doing it cold does not work. Thank you for your comment.

[@beermoneyworkshop9737]

gotta say, I'm really enjoying these knots you're doing with rebar. I think I'm gonna have a go at one in a project on my own channel soon, this is sparking a lot of ideas.

[@GavinClarkdiy]

Thank you very much, I wish you the best for your project.

[@dariomas3712]

usted señor es un artesano muy buen trabajo felicitaciones

[@GavinClarkdiy]

Muchas gracias, me alegra que te haya gustado.

[@johnepperson8867]

A true work of art !!!!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@johnepperson8867]

@@GavinClarkdiy You're welcome Gavin.

[@texasaggiegigsem]

that's a work of art!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@ngalong93allbar]

The best inovasion 👍🏾

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@frayangel8854]

Thanks for sharing your vlog

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it.