How To Make A USB Dongle For An Original Xbox 2017 ATM Ep 1

[@tomseim]

Please, get some heat-shrink tubing to insulate the connections (available at Harbor Freight and other places). Also get some small diameter solder; it will make soldering those tiny wires much easier. It is important to apply the solder directly to the connection while soldering; the rosin cleans contaminants off the surface of the wires.

[@ShnipplesTV]

Tom Seim thanks for the heads up but I've got both the solder wire and the shrink tube now. I just order all my parts from eBay

[@ryantripp7013]

Its 2017. Just soft modded my Wii lol and now its time to put countless more hours on the xbox ive had for 14 years

[@Goodgamer78]

Found a $3 off EBay coupon code. Got a dongle for .25 priority first class shipping. This is a great alternative instead of spending $4 on a dongle.

[@Br3ezyTV]

Yesssssss it worked 😌☺️ I used duct tape an some other soft stuff to separate the wires and wrap everything up it actually works, and nothing is starting a fire

[@calebvelasquez2310]

this is the greatest video ever keep up the good work dude

[@ShnipplesTV]

+TwoThirdsGuppy omg u relly think so? thx m8

[@romo_6one998]

Great video quick question will this method work to control 360 slim console? I found a Xbox controller in my closet cleaning it out.

[@xxundertherosesxx]

Will this allow you to use a 360 controller on the original Xbox cause that's what I'm trying to find out how to do

[@itspossiblyvertigo1232]

Miley Ashlyn won't work lol

[@jackm6307]

I have an original xbox controller and cannot find the usb, controller to pc dongle on ebay. I'm either over or under thinking something here. Ebay has the 360 controller adapters/dongle that look like they will work with an original Xbox controller, but I can't seem to find the info I need to be sure. Can someone please tell me exactly where I can get the usb adapter/dongle for an original, wired xbox controller to get me plugged to my PC?

[@kjmullinz]

With these Xbox to USB adapters, am I able to hook up a PC controller to use on the Xbox? For example, the hori fighting Commander for PC and Xbox One. Will it work with the original Xbox if I use the USB adapter?

[@doublelgaming4640]

I want to know the same. I have a madcats fightstick for 360 and my Xbox is soft modded with a lot of fighting games. I hope some one answers.

[@TheXtender32]

For example, Can you copy the music saved in the original hard drive TO that usb drive? Please answer. I have ton of misic and i want to get it out to the usb but i need to know if i could copy it! Thanks and nice vid

[@itsdelmars5000]

Did you find an answer

[@eileenlucynakurosawa7421]

Yes, and entire folder to TDATA folder without any modification shall play the music on another console if you copy it. Also music can be played on PC or any device that supports WMA audio format. Requires modded systems to get that to work

[@gehx]

no.

[@fakeMbadge]

I used shrink tube a soder and its a great cord works better than OEM one.

[@steliosemmanouilidis5050]

You know that weird connection at the end of the xbox cable,does it need to be taken off?

[@lookymymymym2431]

You are a genius, keep on creating 😍😍😍😍😍👍👍👍👍👍👍👍👍👍👍😘😘😘😘😘

[@FHOM19]

cable works great! thanks for the vid

[@jerrysjunk]

did the lil mod and working perfectly

[@michaellibbee9416]

I got the dongle off Amazon. I cant get it to work a controller. Or is it just for saving the games

[@andrewdupuis1151]

will Xbox 360 joystick work with it to. I only have one Original Xbox joystick

[@MrMurdock2021]

A really good tutorial will like and subscribe

[@Warfield0011]

I see episode 1, 4, 5, and 6 of this series. Is there a episode 2 and 3?

[@saver175]

Can I copy and paste files with this dongol to install emulators

[@CeRoRelli]

My female usb cable only has white, yellow, red and black. There is no green one. Any help?

[@Project-gr6zy]

Yellow = Green

[@imKas]

Could I use the same method to attach USB

[@papounet4620]

Pourquoi couper le fils jaune alors que sur la platine de la manette il est soudé ?

[@soakedpizza7351]

my usb have only red and black wires help

[@3DfxVooDooKing]

how do you format the usb stick . is it like fat32 or ntfs ?

[@Linkbattosai]

+robin vennik It's a special version of fat known as fatx

[@3DfxVooDooKing]

how do you get it like that ?

[@Linkbattosai]

Google USB FATX Formatter

[@schmuck_4444]

Lad i kind of need help, my female usb has the colours yellow, brown, blue and red.

[@ShnipplesTV]

Well the only true way to knows hat wires go with what is with a multimeter. However, I did find a forum that had the same problem. He had the exact same colored wires and this is what he figured out. Red goes with red. Brown goes with white. Yellow goes with green. Blue goes with black. I'm not entirely sure this will work, but it might. I hope it works though!

[@schmuck_4444]

Thanks lad, now he only thing i need now is a bloody soldering iron to finish this project

[@KvackEvolution]

What if i dont have a spare cord from the original controller. Can i use a unofficial controller with just a straight cord and cut off a piece without that thing in the middle ?

[@ShnipplesTV]

As long as the tip can fit in the console it'll work

[@sofasniperman]

I used the wiring from a wireless controller and there are all the colors there, except there are two black wires! Which one do I use?

[@sofasniperman]

And please reply anyone who has an answer. It would be greatly appreciated!

[@ShnipplesTV]

Can you tell me all the colors that are present?

[@sofasniperman]

+AceGames ok, there is yellow, red, white, green, and two blacks. But what I just noticed is that where the cable connected to the wireless receiver for the controller, where the wires meet the little circuit board, the two black wires are soldered together so they meet together! What does that mean?

[@ShnipplesTV]

+Austin Ethridge I'm not entirely sure why there would be two, but if you say there both connected you should be able to keep going. I would just solder both of the blacks to the female USB adapters black cable.

[@sofasniperman]

+AceGames ya I will

[@harryholley]

That is not a bad way to solder. That is how I solder wires. The only bad way is not soldering.

[@Mitans161]

when i insert the usb stick it says that the memory unit is damaged and won't work; why?

[@HALOkiller217]

Pretty sure that's normal, just hit A continue and configure in memory settings.

[@Mitans161]

...there are no memory settings; btw the usb stick is 8 gb storage.

[@bearleesane]

needs to be 4gb or less

[@Mitans161]

...just tried with an old 2gb cnmemory... it recognizes it, but Xbox doesn't see the files on it...

[@bearleesane]

did you format it in fat first not fat32 then plug it in let the xbox erase the memory before puting any files on it so its formatted to fat-x

[@knightwing1800]

Thanks for this vid !

[@ishansingh5352]

👍👍👍 thanks bro this is what I want

[@dustinhoffman1120]

My USB female cable has no blue wire. :c What do I do?

[@ShnipplesTV]

What colors are present

[@dustinhoffman1120]

So I've got the Original Xbox cable all cut up, along with a female usb. They both have a White, Black, Green, and Red wire. However, the xbox cable has an additional yellow and blue wire. The yellow wire is worthless though, like you said. That means I have 5 cables from the xBox cable going into 4 from the USB hub. What do I do with the blue wire?

[@DarkMarkison]

I'm in the same boat as Dustin. Any help AceGames?

[@detailsman5182]

Thankyou for that up lowd more

[@kobeluna71]

my usb female didnt have white wire ???

[@ShnipplesTV]

What colors are present?

[@kobeluna71]

+AceGames red ,green ,yellow ,black . no white on the female USB side

[@ShnipplesTV]

+Sir Luna My guess is that you should be okay with using the yellow wire as the white. You should be fine, it seems the brand that you have might have used yellow instead of white

[@hajjhajji1646]

Thnx a lot bro.

[@over00lordunknown12]

THANK YOU! :D

[@souvikkhanra5385]

how to made usb to ethernet rj45 cable male ?

[@xenniealchayliss2489]

souvik khanra usb thro7gh the rj45?!

[@Elfouwhite]

da hora, mandou bem. thank u, a great job...

[@qik3300]

Was that about 27 minutes too long or what?

[@brandonbarker366]

Ace games glad go hear

[@scog73]

Wow you could of condensed that into a one min vid

[@saver175]

Please let me know

[@scottyager7242]

This has fried two of my flash drives ..... i did everything right

[@alinasser9375]

it work for me

[@mikelopez5395]

i play the original

[@MrPs391]

Bro the video is stupid long.

[@Hellraiser988]

MrPs391 it's gonna be as it's a tutorial

[@GalaxyCatz]

Whear do I find strippers ????

[@skalahmemelord]

boi

[@samhain1198]

Typically at a strip club

[@buuuba7022]

It costs 2€ to buy one of these off eBay that's cheaper and quicker than doing it yourself tbh but still great tutorial.

[@Konphetty]

Burak Crystal some people just dont wanna wait for days for it to come and you can even save a couple of bucks haha.

[@dannym1882]

Burak Crystal Some people already have the components lying around so they would spend 20-30mins making one rather than waiting afew days for it to be delivered.

[@alinasser9375]

Thanks good

[@stevenstephens8815]

Hold up!!! its 2016 right why are people playing xbox original !!?

[@ShnipplesTV]

I just use it when I have something I can modify it with. I love modding things

[@stevenstephens8815]

Nice I wish I had as many sub's as you do tho

[@ShnipplesTV]

Well man all I have to stay is keep going. If you keep pushing and try to stand out a little you'll start to rack up the subs

[@stevenstephens8815]

+AceGames okay thanks bub

[@ShnipplesTV]

I usually don't do this but since I'll be recording tomorrow I'll give you a shout out in the video :)

[@elijarvis4969]

does it work with the xbone controller

[@someguystudios23]

Eli Jarvis probably