How to Make an aluminum bottle alcohol stove

[@BatchStovezcom]

Old school trick. I was taught at an early age to tighten all the jaws on any chuck ie. lathe , Drill etc. It will make it tighter and remove any play in the chuck. It has worked for me for all these years.

[@Traderjoe]

I really like the concept and execution of this from a home business and environmental standpoint as well as its practicality. Good luck with it!

[@benandrhonda]

very nice vid.. just made one today,, nice to see some one makeing a few bucks .. these little stoves work great,, keep up the good work

[@wb93612]

The joy of recycling. Great work

[@proclaimliberty2000]

Thanks for responding! I sure appreciate it. Really good craftsmanship.

[@stevecraignet]

"...So you see, kids, all you need is a piece of string, a Bud Light bottle, your pocketknife, and a $100,000 machine shop... simple!" Great video, and great product! Excellent job overall!

[@PHARRAOH]

made in America, by our people guys, buy em up! great job

[@articat49]

That's great! Well built send me one of them

[@mharrigfeld]

I was wondering if you thought of taking the remaining part of the can, cutting it once lengthwise, and then using it as a wind screen? Of course, after smoothing or rounding the edges... Great video. Thanks!

[@iMatt65]

Very clean work. Thanks for posting.

[@proclaimliberty2000]

Can you tell me if that gadget you used to roll the edge is something that I can buy somewhere and does that make a waterproof seal? Thanks!

[@backyardcnc]

very cool little project and nicely done. However I think your filing technique looked a little awkward and possibly dangerous and it might need some tweaking for safety! Would love to see a video on how you preduced the die to curl the top edge.

[@AbrahamChan88]

Hi Sam, Glad to see another video from you and to see how my stove of choice is made hah ha. Hope you are well.

[@tjn6278]

love your work and affordable products!

[@BatchStovezcom]

Thank You

[@pheenix42]

I liked that adapter for your tailstock....well done!

[@BatchStovezcom]

Thank You!

[@Lawiah0]

Love the hole drilling jig.

[@jay_martin]

Nice work! I made a few of these this week using the press method with a single can. Can you do a boil test for us?

[@neilschwed]

Nice stove but what did you use to roll the can over

[@mitchlund1]

Would love to know how you created your Die ...possibly buy one from you. Have a few other project designs that it would be really useful with.

[@fonduemonkey]

Great work! Great vid! I also love the die action the u used to roll the edges. I still can't figure out how u did that. What diameter are your drill holes???

[@shortster90]

Nicely done. Just out of curiosity, who manufactures your lathe?

[@xTheHumanoidx]

Nice setup you have. What type/brand and size of lathe are you using?

[@deezynar]

Monster strong stove.

[@quercus417]

Great website good prices. Thank you

[@ronschreiber3635]

Very nice job love the lathe . no chance I can field test one of them ? great video

[@BatchStovezcom]

you can pick one up at www.Batchstovez.com

[@algae1000]

You tighten all 3 jaws on your late chuck. Are you using a 3 jaw independent lathe chuck?

[@greenbaylady]

Hi There, very nice work. I would like to purchase one. How much are they?

[@steinderbush]

Awesome , how you make these!!

[@eirikmurito]

very efficient production

[@zuseable]

must be nice to have those tools

[@KingRamiel]

Was expecting some wick in between the cone and the outer shell, like steel wool or something. Also, how long does it burn with 10 cc?

[@BatchStovezcom]

Thanks yes there available but not always they are mostly used in stadium type events instead of glass bottles plus there 16 oz.

[@bscms1998]

satisfaction guaranteed, is this for sale?can i have one?

[@t-risely]

I don't mean to be ignorant. I just stumbled across this video on my travel through KZbin. Why did you make two cuts before trimming the base? Why not just trim the base in the first place?

[@muh1h1]

are these aluminium bottles a common thing in the US? nice work BTW! :)

[@henka1bylin]

Just An Q what differense dose it depending om the size off the jet holes

[@justincase844]

So what was that tool you rolled the edge with?

[@hangswithraccoons]

Cool video man! Subscribed!

[@BatchStovezcom]

+Hangs with Raccoons Thank You,

[@hangswithraccoons]

***** Your welcome! :)

[@Travisfromoregon]

thumbs up for the ingenious dividing head

[@BatchStovezcom]

Thanks Just a simple jig

[@HammerOnTheRun]

Do you ship to Canada? I tried to order one of your stoves but the shipping thing is a little confusing

[@cg7509]

what are you rolling that edge with?

[@Mrjoecreeper]

Do you make all of them on the website?

[@BatchStovezcom]

Ya Know I have never had a problem finding people to help with that task. LOL

[@fonduemonkey]

I heard 1 guy mention methanol race fuel and how it's cheap at only $4/gal. What is your opinion? I used a generic brand of EVERCLEAR called Mowhawk (still expensive at $15/liter) and it seems to burn real clean and not leave soot in the air or on the walls but i have yet to do a boil test to see if it leaves carbon deposits on pots. Can you do a boil test will both of those and tell us your opinion on how they rate with the other fuels you have mentioned on your website???

[@ledguy315]

Nice. That is bad ass.

[@jaredinbend]

how did you roll the edge?

[@tzDub92]

@vipersd1 u didnt use a lathe?

[@raymondmendoza2428]

Hey Mr Batchstove what was the device you used to turn the lip on ur stove? Please advise thanks for your time.

[@BatchStovezcom]

A Die I machined and used to press and form the edge.

[@michael03wum]

what do you mean by sealed using smooth edge, is it a compound or some material? Please clarify

[@KyoNyoki]

Superbe travaille, vous avez des bouteilles que nous n’avons pas en France :(

[@BatchStovezcom]

+Kyo de PassionBushcraft Yes We DO

[@billydengel6647]

what did you use to roll the edges? I've made one but had to fold over the edges. works well, but not as pretty.

[@BatchStovezcom]

I have a Die I use to roll the edges. kzbin.info/www/bejne/nZ-Qh4J7nbaHftU

[@texaslonestarrider]

Very Cool!

[@seth260389]

How does it work?!

[@vvaletoff]

Мастер! Приятно посмотреть.

[@MrGottyman]

Hi, do you sell to the UK and if you do, do i pay in dollars or British Pounds. Thanks

[@AbuGrabIt]

How do we purchase one of these?

[@superlardo77]

how hot does alcohol burn?

[@eltenda]

where i can order one..?

[@emtajh]

how much do you charge for one?

[@PurPle5kull]

do u drink each bottle? :D

[@ralphkirby3516]

Terrific could provide dimensionsfor people who don't have a metal lathe?

[@BatchStovezcom]

+Ralph Kirby Hi Ralph, The bottom section is 2.25" the Top of the cone is just where the bottle starts to straighten. the bottom of the cone is right between where it say Bud light on the neck you kinda have to experiment all bottles are different but the at should get you in the ball park

[@Tishraj33]

KGB bottle dude!!

[@pws-ge2ni]

Excellent

[@BatchStovezcom]

Thank you!

[@hashiramasenju4846]

Do they even make aluminum bud bottles anymore?

[@BatchStovezcom]

Yes But not this type of bottle they stopped producing this bottle in Feb 2014 the new style bottle is a twist top and a different type of Aluminum.

[@hashiramasenju4846]

Yeah I've been looking for them but I figured so. Thanks!

[@BatchStovezcom]

Hashirama Senju here is a video I posted about them kzbin.info/www/bejne/bGSxhWmGgN1ro9k

[@hashiramasenju4846]

Thank you.

[@BatchStovezcom]

Hashirama Senju Your very welcome I do make a stove using the new bottle it's a bit tricky to roll the edge on the new bottles one bonus is the new bottle is 12 grams lighter overall.

[@BatchStovezcom]

The tool used to roll the edge is a DIE that I made for this purpose.

[@humberto121]

Excuse me, what's model of the lathe is it ?

[@BatchStovezcom]

humberto121 Its a small 7" lathe Made By Seig and sold by many different vendors.

[@BatchStovezcom]

Yes I make all the stoves on my website

[@BatchStovezcom]

Thank You!

[@MrShanghai34]

nice lathe

[@jimbooth3]

Great. Love the stoves. Now, do it without a lathe.

[@BatchStovezcom]

The lathe gives me precise cuts you cant get with a chop saw, Hack saw, snips etc. That the way I made them at first trial and error by making 100's have told me this gives the best possible stove.

[@rebeccasilveous8898]

How can I order a stove from you?

[@BatchStovezcom]

dutchwaregear.com/product/batchstovez-2-0-2

[@BatchStovezcom]

The edge of the bottle is rolled over onto itself to form the edge.

[@BatchStovezcom]

спасибо

[@BatchStovezcom]

¡gracias

[@BatchStovezcom]

Yes I make all of my gear.

[@erekelife4334]

и для чего это? что получилось?

[@BatchStovezcom]

его печка спирта сделаны из переработанных бутылок. используется в экстренных случаях, кемпинг, пеший туризм и т.д., чтобы кипятить воду и готовить еду. Вот видео из печи в действии. kzbin.info/www/bejne/n16rc3iYrp5lrrc

[@erekelife4334]

BatchStovez.com thanks; )

[@sapach3]

ohhh waIT!!! THERE'S MY LAITH!!!

[@BatchStovezcom]

Yes I do Thank you or you can visit my web site.

[@RoyalHim]

He has them on ebay called ALUMINUM BOTTLE ALCOHOL STOVE.

[@BatchStovezcom]

Yes that is correct, stop by the website.

[@timothybobbitt7994]

wanna get rid of 2

[@BatchStovezcom]

+Timothy Bobbitt Bottles or stoves LOL www.batchstovez.com/

[@tzDub92]

@vipersd1 haha never mind spoke to soon

[@keninpeoria]

rolling the top much harder,lol

[@t-risely]

Ah yes, I asked this before watching the whole video. Sorry about that.

[@suut7533]

oh !

[@Wisconsin.pikachu]

lol thats just cheating using a lathe for this :p

[@Batchstovez]

If your speaking of drinking alcohol I have found that most do not burn clean and have a yellowish flame. Carbon buildup is to much of a mess to clean. I try to stay away from anything over a 50% Ethanol content.

[@Batchstovez]

No I have a Designated Drinker LOL

[@fonduemonkey]

Great work! Great vid! I also love the die action that u used to roll the edges. I still can't figure out how u did that. What diameter are your drill holes???

[@xTheHumanoidx]

Nice setup you have. What type/brand and size of lathe are you using?

[@jmoeswagger]

What tool do you use to roll that edge???