How to make an RFID door lock system using an Arduino Nano board

In this video, we will learn how to make an RFID door lock system using an Arduino Nano board. However, please note that you can use any other Arduino board for this project.
Create your dream electronic hobby project step by step. SriTu Hobby guides you to that. Stay with us.
How to make an RFID door lock system using an Arduino Nano board
• How to make an RFID do...
***Names of components.
*** Step by step.
***Make it easy.
Bluetooth control remote -- bit.ly/3GWcmmD
Subscribe for more videos --- / @sritu_hobby
Website for more tutorials --- www.srituhobby...
Android app for more tutorials --- bit.ly/3GWcmmD
Our store with the best prices
========================================
srituhobby.com...
========================================
( Source code and circuit diagram )
=================================
Website -- bit.ly/3qDWkdm
Android app -- bit.ly/3GWcmmD
=================================
Components list (Our store -- SriTu Hobby)
=================================
1.Arduino Nano board x 1 -- bit.ly/41yelHy
2.RFID module x 1 -- bit.ly/3QGgfTQ
3.LCD screen x 1 -- bit.ly/40u3pcO
4.I2C module x 1 -- bit.ly/3oDXtjV
5.5v Buzzer x 1 -- bit.ly/3OSmPEv
6.Breadboard x 1 -- bit.ly/3NaJ1uh
7.Jumper wires -- bit.ly/43V7gSR
8.Door hinge x 2
9.Slide Latch Lock x 1
10.Rigifoam or Foamboard
=================================
Components list (Amazon)
=================================
1.Arduino Nano board x 1 -- amzn.to/3mbKYqc
2.RFID module x 1 -- amzn.to/2SPzPOv
3.LCD screen x 1 -- amzn.to/3isdBgz
4.I2C module x 1 -- amzn.to/3hqY5jC
5.5v Buzzer x 1 -- amzn.to/3lWe5Nx
6.Breadboard x 1 -- amzn.to/35rdMVE
7.Jumper wires -- amzn.to/2RjTt4e
8.Door hinge x 2
9.Slide Latch Lock x 1
10.Rigifoam or Foamboard
=================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.ne...
==========================================
Thanks for watching.
If you learned something from this video,
**Like.
**Share.
**Subscribe.
#SriTu_Hobby #arduinoproject #doorlock ‪@sritu_hobby‬

[@Wawan_Setiaw4n_Robotik]

I really like the work of your robot, always successful, thank you for the knowledge. Greetings from Indonesia..

[@sritu_hobby]

Thank you very much!

[@marvell1931]

If you have opened the lock from the outside, how do you close the lock from the inside?

[@rifdahfitrianisaharrudin]

hi mr.. can i ask smthn? how to make rfid read the card? my rfid cant read the card, i use node mcu esp 8266, lcd i2c n rfid-rc522

[@dinggs1242]

very informative sharing sir!

[@ilikememes1402]

May I ask if its possible to have only 1 RFID scanner connected to multiple doors? Then only have the assigned RFID tag open the assigned locker?

[@sritu_hobby]

Yes

[@ilikememes1402]

@@sritu_hobby can I ask in what way should I approach this?

[@Wawan_Setiaw4n_Robotik]

Greetings from us.. This project is very useful, thank you for the knowledge, always successful.

[@sritu_hobby]

Thank you too!

[@johnangelobermejo7891]

I did copy everything except for using a power supply at the end, after I upload the code, the rfid and the buzzer works fine but the lcd has no display saying welcome etc. and the motor doesn’t work too, is it because it seeks more power than my laptop can provide? Does it really needs to connect from breadboard to a external power supply to make the lcd works and the motor (I’m new to Arduino projects)

[@khushitanna6792]

What is the alternative for dc motor I am supposed to submit and present it in college Also the d.c motor is too expensive for a 20 mrk project

[@Mrcreater-j6s]

Bro project to sahi hai but door me automatic 10 second ka timer hona chahiye aur ander se bahar kaisa jaoge?

[@reyjoevennabord.5091]

Hello, does it really need to apply to a power source first?

[@et3i64nikhilmahakal8]

Upload simulation video of this project on proteus software

[@escape.metrix]

Hii please reply Can i use it without I2c module and lcd screen and can I make it without bread board and last if I don't use I2c module and lcd screen then i have to change the code??? Please reply

[@sritu_hobby]

You can connect

[@enlightenUall]

when I upload the sketch to the Arduino Nano it gives me an error | avrdude: stk500_recv(): programmer is not responding | Do I need to change the setting or change the code you gave

[@sritu_hobby]

Please check programmer

[@carlos.galhano]

Can we make a really doorlock? Maybe with a more powerfull step motor, working at 220 volts? Is it possible?

[@yahiabenhamrouche]

مشروع جميل شكرا بارك الله فيك

[@sritu_hobby]

Your welcome

[@carlos.galhano]

Achei bastante interessante, mas gostaria de implementar um sistema em que os empregados de uma loja passem o cartao, e em vez de abrir uma porta deveria ir uma informacao para o excel com o nome e data e hora da entrada e saída. Será que vonsegue fazer um video desses? Seria muito interessante e proveitoso.

[@leothegamer2602]

Hello i wanted to ask something that whenever i run it with my pc's usb it run very smoothly and works perfectly but whenever i run it with batteries it starts lagging and freezing and even sometimes it starts displaying some symbols so what do i do i have tried many things such as changing the batteries connector, the battery it self, using multiple batteries, but nothing worked

[@sritu_hobby]

Please use a 9v battery

[@devitammineni3115]

Bro,how can I add 2 RFID cards while uploading code

[@sritu_hobby]

You can

[@devitammineni3115]

But getting problem at compilation of code How to add reply

[@mihneadavid1414]

Hello ! Can you make electrical simulation about this project? I need it for my collage license, I will pay for it !

[@azibafkar]

can u do with esp32 ?

[@ilikememes1402]

What the Size of the slide latch lock

[@haziqikmal5008]

can you give alternative on how to power the whole thing?

[@mihneadavid1414]

did you find one?

[@atimapuekkiy3890]

What should I do if I want to add a card to my code?

[@falahahahah]

can you make it like that using Arduino uno r3??

[@shreyasshet8394]

Sir com25 port not available in my laptop what to do sir

[@hussainalirahma5550]

why comp 5 is not working it shows this Sketch uses 8186 bytes (26%) of program storage space. Maximum is 30720 bytes. Global variables use 279 bytes (13%) of dynamic memory, leaving 1769 bytes for local variables. Maximum is 2048 bytes. avrdude: ser_open(): can't open device "\\.\COM5": The semaphore timeout period has expired. Failed uploading: uploading error: exit status 1 pls reply

[@Loopdevs]

withouut bread board can work ????

[@sritu_hobby]

Yes you can

[@destinyadams7034]

Keep these projects coming! Can I use an Arduino Uno?

[@GamingWorld_1005]

Bhai isko ketne volt ke battery lagyge

[@sritu_hobby]

Please use a li ion battery charger

[@khaizerrainmayos8952]

hello. can i use arduino uno?

[@sritu_hobby]

Yes, of course

[@Loopdevs]

How can add finger print

[@faazfahad4981]

How much Volt needed

[@sritu_hobby]

5v

[@ilikememes1402]

how to increase servo speed?

[@sritu_hobby]

It's not possible

[@ilikememes1402]

@@sritu_hobby ahh I see, thank you

[@NazmiSyamir]

where can i find a coding?

[@sritu_hobby]

Description

[@eng.AbdullahAl-rabae]

Can I get the code for the experiment?

[@sritu_hobby]

Description

[@faazfahad4981]

Can I add 2 UID on the program

[@sritu_hobby]

Yes

[@CPEAlghinnelleMacarandang]

UHMM do you still have the code?

[@sritu_hobby]

Description

[@saiyan_god5984]

Can you send me code of thes project

[@sritu_hobby]

Link in the description

[@eng.AbdullahAl-rabae]

Can I get the code?

[@JawadMahdi-py5ls]

WHERE IS THE CODE??

[@Muhamad.Nabil.Ramadhan]

lu orang bikin vidio cepetan sangat ooo lu orang punya muka macam lanciaww ooo

[@QuanNguyen-pb9ox]

Can you please give me an email so I can ask some questions about this project?

[@sritu_hobby]

Visit our website