RFID door lock access control system | How to make an RFID door lock system using Arduino

Hello guys, In this tutorial, I will show you how to make an RFID door lock access control system using Arduino.
OK enjoy it now.
Short and sweet tutorial.Only from SriTu tech. If you think this video is good, don't forget to like and comment.
RFID door lock access control system | How to make an RFID door lock system using Arduino
• RFID door lock access ...
RFID door lock access control system
***Names of components.
***step by step.
***Make it easy.
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorial --- www.srituhobby...
Android app for more tutorial --- bit.ly/3GWcmmD
Our store with the best prices
========================================
srituhobby.com...
========================================
( Source code and circuit diagram )
=========================================
Website -- bit.ly/3WVrN5R
Android app -- bit.ly/3GWcmmD
=========================================
Part's List (Our store -- SriTu Hobby)
==========================================
1.Arduino UNO x 1 -- bit.ly/41RMh1o
2.RFID module x 1 -- bit.ly/3QGgfTQ
3.Jumper Wires ---- bit.ly/43V7gSR
4.Foam board --
5.LCD display x 1 --- bit.ly/40u3pcO
6.I2C module x 1 --- bit.ly/3oDXtjV
7.Servo motor x 1 -- bit.ly/3DUibAt
8.Iron stick
==========================================
Part's List (Amazon)
==========================================
1.Arduino UNO x 1 -- amzn.to/3hnMhPj
2.RFID module x 1 -- amzn.to/2SPzPOv
3.Jumper Wires ---- amzn.to/2RjTt4e
4.Foam board -- amzn.to/2Zz2pr2
5.LCD display x 1 --- amzn.to/3isdBgz
6.I2C module x 1 --- amzn.to/3hqY5jC
7.Servo motor x 1 -- amzn.to/3bRunmM
8.Door lock x 1-- amzn.to/3dMqhxK
9.Iron stick
==========================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.ne...
==========================================
Thanks for watching......................
If you learned something in this video,
**Like.
**Share.
**Subscribe.
What do you think? please comment below.
#SriTu_Tech_arduino #rfid #door_lock

[@AlexTechProjects]

Thanks for the video - Motivated and Inspired to Create the You Tube Channel - Thanks.

[@tonkofonko]

Ouuuuuu ... This is insane and perfect. THANK YOU.

[@trilokclasses]

Jhant la

[@DioxinVirus]

Do you like fonko pops?

[@ibrahimhanifabdulmalik4511]

great bro, but i think you should add a timer (maybe 5 sec to the code) so the door automatically closes after opening.

[@phantomburgerz7922]

Pls could someone tell me how you would do that

[@Like_a_comet]

​@@phantomburgerz7922in loop add delay(5000) so every time the lock opens it remains open for 5000 ms or 5s

[@Jonas-ey4xc]

yeah

[@mroplok-othok2888]

Keep your spirit from Indonesia

[@NoVoiceGamer-BMR]

Iron Stick- Link in Description ☠️🗿

[@mastergamer2621]

Nice bro, i was taking this for my final year project❤😊

[@sritu_hobby]

All the best

[@mastergamer2621]

@@sritu_hobby thanks ❤❤

[@Polarbearz9]

What year?

[@user-ox3nz2iu7q]

hola exelente video! una pregunta, hay la posibilidad de conectarlo de manera que, no envie impulsos si no, que quede pasando corriente hasta volver a a pasar la tarjeta? gracias

[@vgtech4716]

Useful information 💗💝

[@BabyMelonTv1]

Bunu en iyi yapan sayfalardan biri teşekkür ederim size

[@ilikememes1402]

Can you set this up with 2 lockers but 1 rfid scanner? Asking if its possible with only 1 rfid scanner? 2nd question if so, is it also possible to do it with 1 arduino also?

[@mohammadaboshami4342]

thanks man it's perfect

[@sritu_hobby]

You're welcome!

[@Avi_23__]

Bro it's work properly or not because I want to make in science project

[@mroplok-othok2888]

Helloooo..... I'm coming watching your video

[@icttoonchannel8093]

Fantastic ❤

[@sangtaobuzz]

Quá hay và ok, đã đăng ký

[@THE_GROUP_512]

So thanks you help me i like you bro so thankssss

[@muthuchitra6937]

Hi I tried this. Error is coming as "Communication failure, is the MFRC522 properly connected?" Can you please tell me how to solve it.

[@srilankantecandmore4381]

Use another server that can give more torque than this. Don't use this servo for this propose. And mount the servo with the lock more securely than this. And always add a backup pin code. Trust me I know.

[@xenzue]

mantap bermanfaat

[@ParyasBatch]

गजब ..........👍👍🌹🌹🌺🌺🌷🌷

[@ParyasBatch]

@@sritu_hobby कुछ नया बोलिए।

[@Ayaan-Rbx]

Cool

[@minhnhat20229]

Rất có ích, đã bấm đăng ký.

[@user-xj1ff1ko5y]

Is the motor gonna pull it back the door lock when it is power off?

[@sodeekaina8687]

pls am trying to recreate this but the code is not working, is there a way I can get the updated code

[@MarceloSilva-ev1lu]

Boa tarde amigo, com esse sistema como fazer para adicionar mais cartões e o chaveiro na abertura, você poderia me ensinar por faor?

[@nielsvanermen7589]

this should be possible with an arduino nano as well right?

[@tonkofonko]

Yes You can do it.

[@Anonymous_Music]

I love the concept. I need the reader.

[@mohamedsalahbedoui4435]

thanks it works for my project

[@fortune_hr]

Please I have an issue with mine

[@fortune_hr]

Can you put me through, it keeps saying ” firmware version : 0x0 = (unknown) warning: communication failure, is the MFRC522 properly connected? “ And my connection is perfect and I’ve gone over it countless times

[@akashpathakamuri5091]

How did you get source code

[@sritu_hobby]

srituhobby.com

[@zara118]

@@fortune_hr me too how to fix this

[@kittyNya38]

LockPickingLawyer enters the chat…

[@s_liie]

what did you use for the circuit to reading the RFID tag.

[@Salmansheikh02]

On scan the RFID gives value and you set the value globally then every there is same value it opens

[@Elenazahra275]

The codes that you mentioned in the description, are they both used together or i have to use the one given in the last?

[@denial.music_]

Have you figured it out?

[@leilanielectronics]

Awesome project!!

[@sritu_hobby]

Thanks

[@harryrana107]

would you need a battery as well to keep it functioning for longer period of time

[@mustakimsk8129]

😮 Love story movie

[@omacchrome688]

What can I do if I want open the door without an RFID tag and also to register new user with a master card please help

[@hirazubair3748]

Bro tysmmmmmmmmmm 🎉🎉🎉🎉🎉🎉🎉

[@allahsservent3580]

Awesome

[@mroplok-othok2888]

Nice skill

[@catsworld4471]

I liked in 4

[@syedmujtaba5232]

Kya iska engine transmission aur diff india bhjsakte hai?

[@yenifervenenzuelo3243]

I am grateful, I have applied it and it worked very well. THANK YOU SO MUCH!

[@dailysportsnews2401]

How much will it cost?

[@trilokclasses]

Jhant nhi hois hamar ha

[@user-uu6dh5gn7g]

اسم برنامج كأتب بي الكود؟

[@yenifervenenzuelo3243]

@@user-uu6dh5gn7g Arduino IDE

[@yenifervenenzuelo3243]

IDE اردوينو

[@et3i64nikhilmahakal8]

Please 🙏 give simulation video on proteus software

[@thantunzaw3059]

Diaplay is essential or optional?

[@isulaperera]

❤️🔥

[@user-lg8zp4xf7k]

مشروع جميل جدا وشكرا

[@wareexplained]

nice project

[@juansebastianvenegasrodrig1790]

could i do it with ESP 32 module Using the same code or i would have any trouble?

[@Abolfazl-MI27]

Hello , I'm beingerner and I dont really know where and how to start using ardinos to build my own projects and I don't have any info or background where wnd how could i start??

[@lorenzom.calzoni5656]

What if I wanted to do it without using the lcd? May I just remove some code lines? If so, wouldyou be so kind to tell me which ones? Thx

[@Lit.mp3]

if im correct you dont even need to do that it wont interrupt anything in the process

[@mroplok-othok2888]

I like it

[@angelicamarieabalona6089]

Hi! I have a question. What is the problem if I scan first the Access denied card then the buzzer beat. and then when the Access Granted it will unlock, but when I scan again either the Access Granted or denied it won't function then. I have to unplug it again to reset. I always happen every after I scan the correcrt card. Please help meeeee.

[@JohnDamalos]

My guy goes iron stick (link in the description) 💀

[@IbonBenedeRivas]

muchas gracias, gracias a ti espero aprobar robotica viva VOX

[@BogartD.Mapisil-ls9fl]

I already get the code of the card in the first step in scan, but in door lock servo I paste the code of the card and why it's always saying that it's "wrong card"?

[@z.s.zgaming4946]

Same issue

[@z.s.zgaming4946]

How to solve it

[@chelicapaulapamatmat]

same problem, can anyone tell us how to solve it?

[@usualuploads]

I am using a gear motor and bolt to move the lock , I want to reverse the connection after the scan of card so that it lock is again completed. How should I do that ?

[@arifzakwan2589]

is the servo motor 180 or 360?

[@gerardojrsenados6959]

why does the second code doesnt work? only the first code. when the code is correct servo doesnt move but scanner works and reads the uid fine.

[@priyajaiswal520]

Can i use 9v battery, or any lithium one? If lithium, of how many volt and mAH?

[@sritu_hobby]

Its ok

[@deroxasangelmariep.3334]

THANKS U SO MUCH

[@sritu_hobby]

Your welcome

[@PR-td9wo]

This work in petroleum automation

[@aaronvaldezgonzalez]

What library was used for the NFC sensor?

[@wohakoha0897]

Kind of impractical You should put a timer on the lock or install another module as you cannot lock the door from inside

[@whitewolf8744]

built this project last night. it works but the lcd screen is only showing the W and P letters on the lcd screen not all the text of "Welcome Put your card" any ideas for a fix?

[@sritu_hobby]

Please check connections.

[@TheRealGammer40]

I am having error with sketch pleas help me

[@lopezezekiell.4913]

how do we add more card/tag? please reply

[@tathatripti6083]

Buy more tags. Touch the master card and then touch the tag you want to add. That's it

[@hichamlaroussibeniiche8178]

@@tathatripti6083 it doesn't make sense, can you develop more.

[@qpvanilla7775]

@@hichamlaroussibeniiche8178 you can also rewrite tags

[@karthikgamers7069]

You need to modify the code,1st you need to know uid of the card and add it in the rfid code the it will accept your card

[@franshesko777]

you can make the uid string a list and check if it contains them when scanned

[@skull25823]

kindly can you tell me how to power (give electricity) this project...?

[@deanergie.]

Finally I can game in peace

[@thusithranga5814]

👌👌

[@Theguyiron]

Can to the same thing but with the keypads?

[@joelortiz6528]

Is there a complete kit like the one on the video for purchase? If so how much?

[@joelortiz6528]

Please let me know if you have a complete kit with all the parts need to just put together like your video.

[@lokergames7058]

Nc . Dont worry i not share vd 7 is ok XD dive for product quality and money way .Bye likes and blast ❤

[@amirkhansherzad5703]

Hi bro, I have a question 🙋‍♂️. I make a project and I use 2x RFID-readers PN532 on ESP32. The 1 on I2C and the 1 on SPI. my code works but the problem is that my RFID readers take turns reading, e.g. I first have to apply the tag to the first one and it scans then I can scan it to the second one so immediately it doesn't work! could you please give me a code for this or could you please make a video about it as soon as possible?! Already thank you 😊

[@davidrichter9164]

Bro? Really?

[@amirkhansherzad5703]

@@davidrichter9164 the problem is solved easily 😂, just by adding a parameter timeout to the reader function

[@gerryyq_]

​@@amirkhansherzad5703how tho?

[@Torshko_]

hello, can you please help me, because when I enter the code that you also gave, it gives me an error and won't accept it

[@badri8164]

Can i use wemos D1 mini for make this?

[@rajatai7555]

Will arduino with atmega328p and ch340g work

[@VishnupriyaMuniyandi-cs5ql]

I have choose this for my final year project. The code was successfully uploaded but I2C module does not work ? what is reason pls help

[@VishnupriyaMuniyandi-cs5ql]

Tell the reason pls🙏

[@ammanshaikh6376]

Can you make this same door lock system but remove RFID and use fingerprint sensor

[@josh_michel1604]

I had to make some changes to the code but it worked

[@sritu_hobby]

Good job

[@ilikememes1402]

Hello. Can you say what kind of changes and paste it here?

[@vm8856]

Hi Bro can i do this with a mega 2560

[@sunilguleria9725]

Please give demo on metal detector powerful using arudino

[@iannmus2339]

Can you check on the RFID library please, is not working

[@Tapirjuega]

my rfid card is always detected as wrong on the LCD screen, and i dont know what i got to do now. And I tried everything but nothing please answer me 😢

[@FreyFreyFreyFrey]

wait another question- is it possible to add a timer for the door to lock on itself?

[@FreyFreyFreyFrey]

and does the nfc reader have to be soldered? Mine isnt soldered

[@Lit.mp3]

yes you just have to tinker with the code. Although im not entirely sure but im sure if you tell the arduino to rotate the servo a certain degree (depending on what degree it needs to be to close the lock) after the amount of time you want that should make it work

[@jareddo06]

Yes. You can just replace the code with something like: if (ID.substring(1) == UID) { servo.write(160); lcd.clear(); lcd.setCursor(0,0); lcd.print("Door is open"); delay(5000); //5 seconds servo.write(0); } else { lcd.clear(); lcd.setCursor(0,0); lcd.print("Card invalid."); delay(3000); //3 seconds lcd.clear(); }

[@leonorardynl.7997]

How to include I2C library sir? LiquidCrystal_I2C.h has no such file or directory. What can I do sir?

[@sritu_hobby]

Please include the library file.it's include in my website.srituhobby.com

[@jncaorte1252]

@@sritu_hobby what's next

[@sritu_hobby]

Please include it to the Arduino IDE

[@fittzu4175]

How can i integrate an alert system or notification?

[@EliteCatalustGaming]

Bro that will work for anything it detects

[@Aondroid]

Good

[@sritu_hobby]

Thanks

[@maelstromm7]

Hey bro can I make this without lcd & 12c module? Anybody reply me ?

[@Antoniu-tk8jk]

I have a question. If I want to connect this circuit with a battery instead of a computer, what is the recommended voltage for the battery?

[@sritu_hobby]

9v battery

[@wizardtechnical5391]

Hi i am having a query that the second code is not provided on the website can u please provide it to me using google drive ?

[@bharathhk6535]

Is LCD display is necessary?

[@aliarshad5994]

To prgrm the time

[@VishuArt1005]

How add mini bazar in this project

[@Raushan_guptaa]

But why not work my servo motor it's properly fix with same steps, all the things are good but servo motor not work 😑

[@TheMeditationAndSleepingZone]

Lad £85 for a lock?

[@gamingfire49]

How did you put the wires in that order?

[@dhruvkumarjha855]

Firmware Version: 0x0 = (unknown) WARNING: Communication failure, is the MFRC522 properly connected?>>>> How to deal with this?

[@johnlester749]

same problem

[@ammanshaikh6376]

Which jumper wire you use in this RFID door lock system

[@ammanshaikh6376]

Tell me (male to female) or (male to male) which one

[@shajin222]

Thanks. Everything is working fine except LCD display. It doesn't show anything. Please help.

[@sritu_hobby]

Check jumper wires

[@BabyMelonTv1]

good

[@sritu_hobby]

Thanks

[@Yashodeep_worldd]

Bro pls reply it's showing the there is no liquidCristal_I2C is there what should I do pls help and it also says that there can't be any ports

[@fittzu4175]

Same prob here