How To Make Arduino Based 4 In 1 Meter | Volt Ampere Watt and Ampere Hour

[@MustafaMustafa-wy6lv]

Thank you. You are an ideal person. Thank you very much, because your ideas are useful to all people. Thank you again from Iraq

[@حيدرالغراوي-ق7ر]

آني عراقي ومتابعه أول بأول

[@Tech-Preparation-Series.]

AHMED RAZA Electrical 2nd.. Very good video sir ❤

[@Litemate]

can you substitute the LCD display with 4-digit 7-segment displays to measure voltage and current

[@grigoreman7198]

Nice project, I like the stability of the display for current and voltage, for this reason I looked in your code to see how you implemented the reading of voltage and current. I'm trying to understand your code but I'm not very good at arduino and C. In your code, I don't understand in this relation "current=(current/200-514);" what does 514 mean, why -514, the number of readings is 200, shouldn't it be only current/200? I also don't understand the relation "volt=volt/30;" why is it "volt/30;" and not volt/200 and "current=current*15";? Thank you and congratulations for the project.

[@sofoclispetrosjulyan1397]

Do you think is possible to build a watt meter for a DIY spin bike in order to measure the power of the pedal strokes ? Thank you if you reply, awesome video btw

[@hans.lntamarck1579]

well done. I see something as you used some other components without showing them in the tutorial. The question i get is that, is this working as showned in the video? as in the schema given??

[@Gabe-xw8cz]

that extra component is a load that drains the battery quickly. It was chosen for the purpose of this demo. It could be any load. Just pretend it's an LED or a servo motor

[@Mr_natenut]

Can ot act like a battery shunt to measure power flowing in and out of battery?

[@gkpgeo]

Can we measure current injected into earth through electrodes n voltage from other electrodes?

[@DeepakrajSolanki]

Heyy... really a fantastic project. ​This was for DC parameters ​Can you demonstrate something for AC parameters. I have an amicisense 6 in 1 energy meter which shows AC parameters. I just want those data to be logged through ardruino whatever possible to mobile or pc through cable or wireless. ​ ​Is it possible ?

[@nascarrd]

You are using a 10k potentiometer, what should it be set too? What are you adjusting with the setting? please explain.

[@evgenyk4311]

That is for voltage reading. ADC can go up to 5V max, so in order to read 12V it needs to be reduced to be within the ADC range. Potentiometer is to quickly calibrate readings without the need to adjust the code

[@qadeer1685]

Good job Sir

[@sawomirgaj1457]

Why are the current indications higher than the real ones in my device? However, the voltmeter readings are correct

[@ju1cypepper735]

Both resistors should be 0.25w ?

[@rushikeshkothiwale479]

Hi, please can you tell me if I am using WCS sensor in place of ACS what changes should be done in the code

[@raffaelebarlotti9017]

Hi, congratulations on the project! I made the circuit but the Ampere measurement is not exact (the measurement on the display is greater than about 2 Ampere), can it be calibrated and how? Thanks.

[@KiyanisLab]

yes it can be in the code

[@rp1570]

Should we adjust the potentiometer?

[@4033doga]

Merhabalar bu projeyi esp8266 ile birlikte aynı malzemeleri kullanarak blink uygulamasında nasil takip ederiz.? Bu şekilde bir proje yapabilirmiziniz? Arduino uno esp8266 lolin acs712 16x2 lcd ile birlikte blink üzerinden nasıl takip edebiliriz.?

[@raffaelebarlotti9017]

Are the 6 resistors of 5W / 220R for a test or are they necessary to have the right measurement of the values? How should they be connected? Thanks.

[@KiyanisLab]

no you can use any load

[@raffaelebarlotti9017]

Excuse me, I also wanted to know up to what voltage and current can be applied to the input? Thanks.

[@KiyanisLab]

30v and for amp it depends on acs712 sensor 5

[@SagarCh_]

Can it be used to check the capacity of salvaged lithium ion cells from an old laptop battery?

[@mas11ful]

How would you make this project wireless? I would like to be able to monitor my solar panel from inside the house. It’s a small 12v solar array that run the lights on my garden railroad.

[@KiyanisLab]

good idea bro i will work on that

[@mas11ful]

@@KiyanisLab thank you

[@anatolsam6715]

Hi. Please add adjustable buttons control of min and max voltage and current, and dependable logic output.

[@sumitpatil07]

sir why u choose arduino nano & not other arduino?

[@MuhammadBilal-im7yt]

nice one. what are the highest volts and amps this can measure. Did not understand the Amp H relation here, is it to display the remaining battery capacity?

[@KiyanisLab]

30v and 30A max and AH is the Current consumption according to time

[@MuhammadBilal-im7yt]

@@KiyanisLabthanks for your reply. Would it be possible to modify increase the measurements capacity to 60v and 60A? If yes can you please advise. I would like to use it for my DIY power supply for power electronics. what happens if the inpit increases measurements capacity, does it display the Max or burnsout. Thanks

[@mubbashirshirazi3758]

please guide me if i use current meter (20Amp) module what changes i need to do in the code and which amp module you used in the project and in the code

[@brajesh5635]

Did you find answer? Please let me know i want to use 5amp

[@mubbashirshirazi3758]

No I didn't find the answer

[@harikamalakarreddydarapu7410]

Very nice project

[@kanastudios1248]

Hello sir! Please add to this temperature monitoring Please reply 🙏

[@thenzfpv6311]

How make rpm tester by sensor voltage and amper?

[@dayanandkasle5146]

How this ckt measures voltage?

[@sureshsukumaran7474]

Good work,. Can I use it 35A current .

[@KiyanisLab]

Yes you can but you need to use different current sensor this one can go for 30A max you can use ACS724 40A

[@sureshsukumaran7474]

@@KiyanisLab thanks ,need edit code?

[@gururajchannada660]

How make two ohm meter using one aurdino using lcd display

[@sarathighosh8033]

Excellent project

[@algunvatansever8283]

can we use arduino uno and a wifi module

[@gasparebuttitta3188]

What sets the 10K potentiometer?

[@TheCanvaStudio]

02:26 Can anybody tell what's +VE? Please urgently.

[@Gabe-xw8cz]

ask on the arduino forum

[@TheCanvaStudio]

Can I use it to measure ac current directed to home?

[@campercreator4016]

Which supply you used AC or DC ?

[@sasitech3249]

Thank you working well.......

[@36Nizam]

How many volts i can measure with this Maximum? Hope you make more projects. Good luck...👍👍👍

[@MohammadMohiuddin-bd]

Could you please make video for measure AC current, voltage, power factor also power consumption display with a data logger. If possible add remote view via internet. I have no idea, is it possible or not. Hope you could make it.

[@KiyanisLab]

yes bro soon

[@MohammadMohiuddin-bd]

@@KiyanisLab Sir, Thank you so much for response me. Actually I want measure AC (200V - 250V) result instate of DC electricity

[@Experiment_Club]

Why u connect 4resiStance in parallel

[@KiyanisLab]

i am using them as load

[@edebiyat_arastirmacisi]

You're pcb gerber file to shere ?

[@canalunoplay]

Boa tarde passando para deixar meu joinha video top de mas Que Deus te abençõe.

[@TheCanvaStudio]

Can I use 12V automobile bulb as load? Any body please reply..

[@jomontk]

yes

[@kanastudios1248]

How to add temperature and temperature cooling fan auto on off. Please tel me

[@KiyanisLab]

ok soon bro

[@adhimlubis3105]

Brooooo what voltage can be measured?

[@KiyanisLab]

60v max

[@qadeer1685]

Good job

[@edinfific2576]

At 0:46 the advertisement for PCBGOGO has supposedly 4 different customers writing exactly the same review text. Clearly fake reviews.

[@mahedihassan7611]

How to set this 10k pot

[@Edmorbus]

Please share Arduino code and thanks for sharing

[@youpattube1]

Thumbs down. At about 4:30 you show some components outside of the camera view, and hook something up that changes the displayed voltage, but don't say what you are doing. What could have been a useful video was ruined by your laziness.

[@yogeshbhuva3713]

Up30v dc power salega

[@Ataxsan]

Merhabalar 100v solar panel den gelen bilgileri okuyabilirmiyim bu sistem ile ? Şimdiden çok teşekkür ederim...🙏

[@nurettinkaraca8641]

Merhaba devreyi oluşturdunuzmu oluşturduysanız nasıl oluşturdunuz?

[@Ataxsan]

@@nurettinkaraca8641 evet olusturdum

[@nurettinkaraca8641]

@@Ataxsan lisans bitirme tezim bu yönde de sizden yardım alabilirmiyim devreyi oluşturamıyorum

[@Ataxsan]

mail yazarmısın

[@AshishMishra-fl1vv]

01:38 Save time

[@yogeshbhuva3713]

Sir dc voltage 30v salega

[@KiyanisLab]

yes

[@skalgotrading]

Please do it with pic microcontroller

[@KiyanisLab]

ok bro

[@chanellevera8355]

The code can't open

[@tahasaud3701]

My arduino is giving error of storage issue 😑 while uploading the code

[@ar.mamunhossain9592]

thanks brother

[@Humble3882]

Hi friends

[@ZekkhYT]

solo me marca voltage , no sirve

[@HimanshuSingh-wv8je]

Nice

[@sasitech3249]

we want bidirectional ampere code

[@KiyanisLab]

ok bro soon i will make ac meter

[@ShamimAliRaza]

Sar mukmmal code send Karen

[@sanu7210]

this is not work for me

[@aeb5307]

Gracias.

[@valtersouzaribeiroribeiro9534]

Nice Nice

[@حيدرالغراوي-ق7ر]

🌹🌹🌹🌹🌹🌹🌹🌹

[@somenghosh7531]

where is the code?

[@KiyanisLab]

in the video description

[@janardhan.s5875]

Error program

[@jose170682]

Hello. I congratulate you on the channel, the videos are very didactic to be able to learn with them. I wanted to know if there is a way to use the special characters from the project kzbin.info/www/bejne/fX22pIehlMuZeNE in this using a 20x04 lcd, I'm new to arduino programming and I don't know how I could adapt these characters to this project. Greetings.

[@afridkhan21]

Working batao yaar

[@KiyanisLab]

ok bro soon

[@sarathighosh8033]

Excellent project