How to make brass stamps with the Xtool F1 Ultra Laser

[@TheAAKai]

Hey, awesome! We spotted our MOVE stamp in the video. After more than 300 uses, it's still as good as new. Thanks again for the great quality.

[@DieselpunkRo]

That is awesome!

[@MariSews]

Thanks for sharing your settings for the stamp. I’m have this machine and have been wanting to make my own stamps. 🙏🏼

[@JamesPiazzaII]

Behind the School!!! :) Love your videos!!!

[@ropeany1]

You can run what's called a clean up pass after you are done engraving. It is normally done at a higher frequency and lower power than your engraving run and will leave you with a nice surface finish which helps cut down on the cleanup time. May want to experiment a bit and see what your settings would need to be. I know on my 30W I run like 40% power and around 60KHz for freq and only do 1 pass so it's quick.

[@DieselpunkRo]

Will do. Thank you

[@Staren01]

I have an F1 Ultra in the other room. I bought it during the launch event. I haven't remade my own maker's stamp yet, but it's on the todo list. If you have a use for it, it is a great tool.

[@lutam921]

100 layers and 0.01mm step down is 1mm total depth. Looking at the stamp it seems much deeper. Does it mean one laser pass removes more thatn 0.01mm and at some point during the print the laser will have suboptimal focus?

[@made_by_sundal]

Nice👍🏽👍🏽👍🏽 I saw my logo there 😉 I use it a lot. Thx.

[@walterdouthat4056]

Imagine the details you could place on pieces of metal, like the rims of those glasses as an example. 👍

[@eurekadog]

Hi dieselpunk I just found your channel. It’s really good❗️ Love your humor and your work. Just watched this video on the X Tool laser. Are you now making maker stamps. I’d love to buy one or two. I’d love to become a member but unfortunately the $ isn’t there yet. Hopefully I’ll be able to afford becoming a member soon.

[@lutam921]

One more comment. Do you know why for all modes except enbossing, we have a limit of 10 passes, but for the embossing, we can engrave during hours? It means, we have to make the depth map always outside the Xtool Creative soft. We cannot just draw a square and put text in it because it won't be in embossing mode and we'll hit the 10 passes max. Xtool Creative software is too limited and Lightburn support for the machine is incomplete.

[@davidmcguinness9187]

thanks for the video

[@peaceofleather]

I wonder if the P2 would do it a little faster. I have a D1 Pro 20 Watt but have not tried brass yet.

[@jameswupp]

Where do you find the blank brass blocks pre drilled to used with arbor heat press?

[@fredthegreg]

Wow. That's impressive

[@jrapheal1]

This came out great! I noticed you used a png file. Is that better for a job like this? can an svg be used as well?

[@lone_ranger037]

Where did you get your brass blank?

[@Fury3D_Designs]

How long did the engrave take?

[@ooothatshowitsdone]

20 hours!!!! I could engrave that in 10 - 15 minutes on my cnc, and saying a cnc can't cut fine detail is misleading, I have engraved dies/moulds/electrodes with lettering as small as .5mm, it's all about having the correct set up, a decent cutter grinder and cutter microscope help to get accurate cutters every time and using the correct type of cutter and angle ensure perfect results.

[@DieselpunkRo]

I Would love to see this set up you are talking about and some results with letters 0.2 mm thick like my laser can do.

[@killariddimsoundsystem608]

Next time I do one I'll drop you a link, right now I'm busy engraving stainless steel door plates 👍

[@Sandercats]

the xtool has a great user friendly ecosystem but 20h is way too slow, with a 50W fiber laser you can do 1mm per 10min approximately for the same price

[@aprendeconhector0937]

Hola amigo, y puedes los mismos sellos?