How To Make Car Decals With Cricut - vinyl and printable

[@joew.8111]

As a Southerner, I appreciate your lessons and your voice!

[@woodandwheelz]

I do a lot of other things where a sealer is needed and I would like to add that I would recommend you get a spray sealer that contains UV blockers. That will help with the sun fading the decal. The MinWax is great but you may need to experiment with different sealers as they may react differently to different brands of ink. Epson, Canon, HP and others don't use the same formula for ink. I'm sure there is some sort of standard, but I'm not sure. Also, if you don't have a second person to help make sure the decal is straight, you can use blue or green painters tape to put a line on your window or car where you want to place the decal. Step back and see what adjustments need to be made and make them. Now you know exactly where/how to place the decal so it's straight.

[@nicolemalters1094]

Terre

[@helpfulhempcbd9507]

I was debating whether or not to invest in a cricut or just pay someone to print my decals for me. This definitely was a huge seller for me to just make it myself and spend the money on a cricut. Thank you

[@ailsamarshall5010]

If you spray the surface with water with a couple of drops of dish detergent, it allows you to move the decal to the best position, then burnish to get the water out and leave to dry.

[@marilynmulkey6095]

An overhead camera would be great.

[@carlalayne]

Marilyn Mulkey Yes, it’s almost necessary.

[@destinymoneypenny4202]

That’s what I was thinking!

[@kristinaell2988]

Agreed!

[@inspirebeautylifestylechan5547]

Where do you buy them

[@ellainenailartisteducator4182]

100%as you can’t see it close up at all :(

[@Ariesgal]

I learned so much. Had no idea about printable vinyl and I just got asked to make a thin red line flag car decal and I was so lost on how to do that so thank you for this!!!!

[@MakersGonnaLearn]

Glad it was helpful! You're welcome!

[@Atlantismonkey40]

We just purchased a machine. Truly I thought “we” were getting it for her. After learning what the machine can do, I think it will be well used. Thanks for the show and tell.

[@MakersGonnaLearn]

That's great! It's a super fun and versatile machine!

[@SouthLincsMiniOwnersClub]

I am thinking of buying one.

[@444loveangels]

Hope your Cricut maker is ok after the after spray went in the machine.

[@MakersGonnaLearn]

Thank you!

[@jesshasnofilter]

So THAT is what flatten means! Thank you!

[@leolion7781]

Can you use a color laser printer to do the printing? New to Cricut Maker and need more detailed instruction on print then cut. I'm assuming the vinyl needs to be in the paper tray. Is there a prior video on Print then cut with more detail? Thanks!

[@marydomijanliegeot9086]

Already did this tail one and its fabulous.. went thru the car wash with it and it was fine. Used 651 vinyl.

[@therusticfarmco7642]

How is your decal holding up after a year?

[@daniellehamill]

How do u get the print to stick to the 651? Can't print it directly to it or do u?

[@rmd9250]

What about putting them on the inside of the window to help protect them?

[@kidnpigtogether]

I’d like to make bumper stickers with my Cricut Maker, any tutorials anywhere?

[@CrystallMechelleBanks-]

That cricut machine is amazing. I have seen a lot of women make all sorts of cute decals and resell them ... they made a killing. I like it butttt to get it I would need more of a incentive.

[@MakersGonnaLearn]

Thank you for watching!

[@billheath6858]

Do you have any videos on how to make decals on clear printable vinyl to be put on inside of window but seen from outside...thanks

[@helenaa2487]

lol love the bad "dad joke". This was such a great video and a lot of the comments were helpful to a newbie like myself. ill defiantly be a member to Makers in a few.

[@MakersGonnaLearn]

Haha thank you so much! Thats so sweet of you to say!

[@heymsrush]

I’m curious! What brand of “permanent” vinyl would you recommend for car decals? Also if I’m selling them I wouldn’t want the Cricut logo on the transfer tape so what would you recommend using?

[@Kyomiibrown]

You can use any make transfer tape, it doesn’t have to be Cricut.

[@carriemccormack4537]

Thanks so much! Great job and informative for me as far as the transfer process...plus I learned about printing on vinyl to make an actual sticker which I never even thought about!

[@MakersGonnaLearn]

Thank YOU for your kind words!

[@Gidget0407]

I am a new member of Makers Gonna Learn and I am so excited to get started! Thank you for all the YT learning videos. They are greatly appreciated!

[@mariakenney3613]

Thank you so much Rachel! I have been totally afraid of this machine! You have explained it so thoroughly ....so helpful!

[@bonnierosseter4964]

for the printable decal not quite sure in how you place on car.... can u send a video in how you put the printable one on? i love that it was very helpful TY.

[@MakersGonnaLearn]

Here is a better video to reference :) kzbin.info/www/bejne/oXu8lpd4mp6Zg6M

[@taiilynne6418]

I’m brand new to the cricut world so excited to have come across your video! You have taught me so much just in these 16 minutes! I wish the was a bundle for me to buy of everything I need in one! Haha. I have 651 vinyl and 5 sheets of HTV. I am in need of some stuff and thank you for letting me know what I need to get started! You rock! Great personality too! :) Tailar Gagric!

[@onelovejosie31]

Hi love the video quick question according to the can indoor only so will I have a problem with it on my car in the florida heat?

[@beerdiaryshootinmcdaniel8063]

Thanks for these videos. I got one for my wife a while back. I now use more than her HA.! I am going to try printing some decals later this week.

[@MakersGonnaLearn]

Have fun!🙂

[@daniellekearns3561]

Hi Makers Gonna Learn... can you tell me a UK version of the sealer please? There’s so many, I’m overwhelmed! Fantastic video, thank you 😊

[@Cr00kedEye]

I like your energy and accent :). Looking forward to making my first decal. Thanks.

[@MakersGonnaLearn]

Thank you! Best of luck in making your first decal.

[@BrianWerner]

Good video. I didn't even know there was such a thing as printable vinyl. I just bought an Explore Air to experiment with.

[@MakersGonnaLearn]

Have fun!🙂

[@cuervo1228able]

There are lots of different brands too. Look for printable sticker paper. Enjoy..

[@jj629ful]

im still tryna get it when you made the GET OFF MY Tail with the color printer on the paper how you keep it blue when the vinyl is white and non paper?

[@cuervo1228able]

The tail was printed on printable sticker paper so you can do it any color, the bear was done on white permanent vinyl.

[@shellyfitts-oliver7262]

Hi Rachel great job. I’m definitely going to make the Get Off My Tail decal.

[@MakersGonnaLearn]

Thanks for watching Shelly 💖

[@shellyfitts-oliver7262]

You’re welcome Tanner I love your channel and the membership is so AWESOME love it.

[@sarahmiller802]

If I do a sticker for the door of my car will it be hard to remove later and will it hurt the paint on my car?

[@DarkAngel-mr1zh]

Thanks for the video and clear instructions. I'm new to the Cricut scene and I've been meaning to make a decal for my friend.

[@MakersGonnaLearn]

You're very welcome!

[@wcjc99]

I have my sublimination ink in my printer. Can I use the printer as is with that ink and then spray the clear coat over with no problem. Or does the ink need to be changed out?

[@dysfunctional_vet]

can you explain how you cut down the fantail image for placement? i was thinking a circular cut, but there are so many ways to skin a fish

[@saralopez78]

Can I do a label this way on a industrial battery? And would I use the same type of paper at the tail one?

[@annalisluck2903]

I'll be honest...I liked this video for the corny bear/bare joke. Thanks for all the super helpful tips!

[@MakersGonnaLearn]

Thank you so much for watching!

[@michellec7939]

I also LOVED it!

[@nascar427]

I use no sealer. I print my printable vinyl on my Canon color laser printer. They turn out beautiful and permanent.

[@tiffanysmith5608]

Oh my gosh girl… I don’t know how I came across this video that is a year old! But let me tell you a learn more in this one than that I have and from anyone else I really relate to you a lot! You are a awesome teacher! I currently signed up for six months and as we speak I’m trying to get some other information so I don’t have to search and search and search for you… Please help! I absolutely love my membership and all the access I have to the wonderful fonts and Cut files, they are amazing! I was just l wish for a easier way to be in touch besides searching KZbin… :-(

[@ninakirby8095]

Does the window cling vinyl have to be mirrored? Also what all types of printers can you use for the print & cut ones? I have a hp deskjet 2700 model. Will it work??

[@margaretjohnson2821]

Thank you for the video, I just came across it. Can these be applied directly to the paint, like on a door, gas tank of a motorcycle?

[@hermansmith2577]

Hi will permanent vinyl need to be sprayed with polyurethane if applied to a plastic water jug

[@MakersGonnaLearn]

No that is not necessary. Great question!

[@karentornberg7936]

I absolutely love Tanner and Rachel & everyone else!!! This has inspired me to deck my car out in Scooby Doo!!! Love printable vinyl!!!

[@blancabowman4164]

I love your video. It is very clear and easy to understand. I want to know how you do your lighting for these videos.I teach online and would love to hear how you get these beautiful videos.

[@JelscreationsNmore]

Can you use clear contact paper for the transfer tape

[@MakersGonnaLearn]

Yes, just make sure it's not too sticky or it could remove the ink from the printable vinyl.

[@JelscreationsNmore]

@@MakersGonnaLearn ty

[@MakersGonnaLearn]

@@JelscreationsNmore Welcome! :)

[@peggywilliams3084]

Can you make a vinyl transfer for a t-shirt from printable vinyl?

[@HayleyGomes]

I want to get started with this! In the UK we would normally put the car stickers on the inside of the window. I assume I would just print the image flipped so it would adhere to the inside of the car?

[@MakersGonnaLearn]

We don't recommend that as you will see bubbles! Also, if your windows are tinted you won't be able to see it well if it's on the inside :) As for the printable vinyl, those actually cannot be placed on the inside of the window to face out. Hope this helps!

[@reddsshaker3477]

If you’re simply cutting a single color vinyl design you can indeed flip the image to cut backwards.....in the design center app. Also, mist a little water w/a small drop of dish detergent in it onto your glass before applying the decal, and use the squeegee to push out the bubbles starting from the middle of the image.

[@smithliz14]

Was wondering if you can use printable vinyl on a stainless steel tumbler after spraying it with the polyurethane will that keep it from coming off while hand washing?

[@gaabz62385]

I actually have this same question

[@juliezingelman739]

Anyone...?

[@pamgramberg4324]

Hi, I love ❤️ your videos. I'm a member already. How can I make decals to sale and put them on peel and stick tape. So it will be easier for the buyers to apply? Thanks 😊

[@amrey31]

So all you need is vinyl and transfer tape & it would be weatherproof? Or do you also need to seal it once it is on the window with the spray?

[@craftking1081]

Thank you for the video. I've definitely gained some tips from this. I see it's almost been 2 years since you posted this video though, and I'm wondering how well the whale decal has held it's colour?

[@TammyW0121]

This video was super helpful. However, after printing first my letters got fatter and blended together. Would it be my printer?

[@lisachamberlain5621]

I never knew about sealing the printable vinyl. Thanks for the tips!!

[@MakersGonnaLearn]

Thank you so much!

[@Karenm1969]

I was told to use a clear layer for sealing the printable vinyl to make it “water resistant”; which is a better option the poly or the clear film layer ?

[@cuervo1228able]

@@Karenm1969 I was wondering the same thing. I normally use a clear laminate but recently learned it didn't hold up in the water.

[@katelyntyner6043]

If I want to make a multicolored or layered decal would the best option be the print version? If possible I’d prefer just using my machine. But I’ve only done single layer cuts so far. I want to make a cute Yeti sticker for my mom’s car. I can do single layer but it’d be cool to try a multi color/layer.

[@FurrealsKrafty]

Can you put both of these types of car decals on the actual body of the car? So not on the windows on actual paint, or does it damage car paint ?

[@jonl7571]

so after printing, you print on normal printer paper? and then put it in the cricut, do you put transfer paper over the printer paper ? i’m confused how you are peeling or if it’s just peeling paper?

[@MakersGonnaLearn]

No. We're using Cricut Printable Vinyl: amzn.to/3bC84R7 . You print on it, cut it, and then apply it. It's like sticker paper that's printable :)

[@glenda529]

I need to make a Walrus with a name on it (Like you white Mama Bear one) that is 3" big. I need this to be on Card Stock (the walrus). Could you give me some direction ? I am totally new at this!

[@denisechristian6477]

With so much ice and snow scrapping here, I would like to put decal on inside of vehicle. Would you mirror image to be able to do that ??

[@MakersGonnaLearn]

The issue with placing adhesive vinyl on the inside of the window is that it will show lots of bubbles under the glass. Also, you cannot place a printable vinyl inside the car and hope to see it on the outside.

[@shontesmith2439]

Will the be able to stick on the actual car? Not just the window. And is removable when sticking it on the car? I want to cut out some cow print spots and put it all over my car.

[@Southerngirl7305]

Thank you for your video my question is the miniwax spray polyurethane clear satin spray a water base or oil base spray?

[@MakersGonnaLearn]

water based! :) Good question!

[@QueenAmethyst97]

Thank you for this video!!! I’ve officially made my first decal!! 🤩

[@MakersGonnaLearn]

Wonderful!❤🎉

[@NoOneCaresAnyway1234]

@@MakersGonnaLearn what cricut machine did you use? I'm trying to learn which I need, I'm new to this. Thinking the explore air 2 but it only does white paper? I want to do shirts and decals I need my own little business

[@MaryGarcia-gf8tz]

Question can we use any type of printable vinyl or sticker paper and seal it with the polyurethane?

[@MakersGonnaLearn]

Good question. I would assume so, yes. However, we do not want to give detailed advice on other products that we have not used. We always use Cricut Printable Vinyl because it's a great product (and we don't love many of Cricuts' products, so that's saying something), and it's never given us any issues. Other brands could require other procedures. But I would guess you could seal other brands as well :)

[@kevincaudle6030]

What model cutter are you using? What brand of white permanent vinyl are you using in this vid?

[@MakersGonnaLearn]

We're using the Cricut Maker, and Oracal 651 white vinyl :)

[@Digital_Ken]

What IPad are you using in this video? What iPad do you recommend using for this kind of project? THANK YOU for your advice

[@MakersGonnaLearn]

We'r using an iPad 6th generation here, but anything newer works as well. We are an Apple company so we use MAC laptops mostly, but most good-quality devices work great :)

[@theresaricci7033]

If I make a decal for a leased vehicle, what kind of vinyl should I use as I want to take the decal off when turning in the car?

[@Arcturian1111]

Can you use a Laser Printer instead of a Cricket to make Bumper Stickers?

[@loriwingfield3650]

I will be attempting car decals soon and just wanted to ask….did you print with sublimation ink or regular printer ink?

[@davidmanevich1040]

What is the best vinyl to use to make vinyl decals for my plastic Canoe above the waterline. And is there anything i need to put over the permanent vinyl to make it waterproof

[@davidmanevich1040]

I would like to use white reflective vinyl for a basic decal

[@davidmanevich1040]

Do I need a sealer over the vinyl I'm not doing a printable decal just white reflective permanent vinyl

[@chrisgifford8764]

Thank you. I love you videos. So informative. What is the name of the transfer paper you mentioned?

[@MakersGonnaLearn]

Here you go, friend! :) Masking Paper Transfer Tape: amzn.to/3bB57jJ

[@rosess12]

so when do you mirror before cutting?

[@KathBlanchard-cl6lc]

Hello how do you make internal window decals please.

[@teresaking4960]

Awesome tips 😊

[@slick9888]

I have a question for all. I need to print full color stickers that are 11.5 x 11.5. for my projects. Can the Cricut Maker Machine do that? And do I need to get a large format printer and if so what printer should I get Budget-minded.

[@MakersGonnaLearn]

Cricut Print then Cut is a max of 6.75"x9.25" unfortunately. The printer we like is this one: Canon TS9120 Printer: amzn.to/2zsSdGt

[@A_New_View]

On the printable vinyl one did u put transfer paper on to get it off? What if u had individual letters would u have to peel each one off?

[@MakersGonnaLearn]

No, you would use Masking paper Transfer Tape :) amzn.to/3bB57jJ

[@kaylamarie6350]

A lot of comments and I’m sure the question has been asked and answered already. But with the tail one, do you still use the transfer tape?

[@julieveitia2979]

What about cling on that could be placed on the inside of the back window? Is there such a product?

[@MakersGonnaLearn]

We don't recommend placing decals inside the windows, they just don't show up as well. However, if thats something you want to try, feel free :)

[@julieveitia2979]

Will the vinyl cling to the glass?

[@thegodofmusic04]

What kind of printer is better with the printable vinyl Laser Or Ink jet

[@MakersGonnaLearn]

Inkjet only :)

[@rmd9250]

What about putting the decal on the inside of the window to protect it from weather?

[@ritaurbina8281]

I'm sorry, did I miss when you said what type paper you used for the Tail? Is that sticker paper?

[@thecappytrails]

Hi, I'm curious as to how quickly your decals fade in the sun being that they're on a car. Does that spray actually protect against that long term? Especially since your using a dye-ink printer, those inks fade within days of sun exposure.

[@MakersGonnaLearn]

Thank you for watching!

[@janetlee2263]

i really liked it now to try it.

[@nailedbykrizty2110]

I have a question 🙋🏽‍♀️ can i layer permanent vynil for a lilo and stitch one ?

[@daniellehamill]

Also wondering same thing

What kind of sealer did you use I don’t see that linked and if I zoom I can’t read it

[@alexceballos8321]

If you use oracle 651 do you still have to spray it?

[@Mamahoodxo]

What type of paper did you use for the cut and print ?

[@itsbellababyeyeam707]

Omg i need to know this

[@saturdaysam4393]

GREAT VIDEO! Do you have a clear vinal material that is actually temporary vs. permanent and could easily be changed out on a regular daily to weekly basis?

[@tammyleitzke7929]

I wondered the same thing. I want to be able to take if off easily. also I wonder if you mirror it if you could put it on the inside of the car window vs the outside.

[@amandavanbuskirk5033]

did you use removable or permeant vinyl. also is the transfer tape left on when applied to the car. an is this for bumpers or windows. Thanks for your video very informative, and i cant find the links you said was below

[@MakersGonnaLearn]

Hello! We used regular vinyl :) We do not leave the transfer tape on, we remove it after applying the vinyl to the car. This is for bumpers and windows, yes :) All the links are in the description of the video :) Supplies Used: Cricut Printable Vinyl: amzn.to/3ckgv3B​ Cricut White Vinyl: amzn.to/3cp2MZm​ Masking Paper Transfer Tape: amzn.to/2VfQzAy​ Canon TS9120 Inkjet Printer: amzn.to/2K6gnbM​ Alcohol Pump Bottle: amzn.to/2wNybFI​ Spray Polyurethane: amzn.to/3be5b99​

[@Fbghostwriter]

This is so new to me, but what did the printer print the tail on? Was it paper or transfer paper?

[@MakersGonnaLearn]

This is Cricut Printable Vinyl: amzn.to/3bC84R7

[@sandramiranda1118]

can you do that in the explore air 2?

[@peej.w7598]

I own a car wrapping business. How thick of a vinyl can I feed into a cricut? Some brands I use are as thick as 5.5mm.

[@fefecrow]

There was not enough direction for the whale tail. So you only used printable vinyl without using transfer tape? But you used a different kind of vinyl directly in the Cricut for the mama bear

[@sherrimanoukian4718]

Can I use the infusable ink directly on rubber or metal

[@MakersGonnaLearn]

No, you cannot. Infusible Ink has to be used on a material made of mostly polyester or an object with a special coating :)

[@sherrimanoukian4718]

@@MakersGonnaLearn I sublimated on rubber and was hoping to fix a mistake,technically doesn’t it already have the coating? What do U think

[@carolinagrutzius1580]

Thanks for sharing this helpful video, also my blade is not cutting that good how much should I change the pressure too?

[@Jean2235177]

Thank you, again for ❤️ THE BEST ❤️ instructional videos!

[@zeva606]

How can you make things longer than the matt? Like lengthy decal for a truck or something? Also can you use vinyl without a matt? I have just bought an air 2 and don’t want to ruin it in any way.

[@MakersGonnaLearn]

Here you go: kzbin.info/www/bejne/jZapgJmfq6h9has

[@zeva606]

@@MakersGonnaLearn Thank you so much!!

[@danielleanaya6207]

So when making these, let’s say I have the printable vinyl, I was thinking I’d have to laminate the sticker to make it waterproof so it won’t mess up on the car. would this spray be protecting the sticker like that?

[@tink5549]

Do you know which type of laminate paper you would use on top of the sticker? I did the exact same thing as her and when I went to try sprinkle so water on it the whole picture smeared off 😭

[@amylwallace66]

I about had a heart attack watching you spray the sealer and all that spray went all over your cricut...omg

[@susaneisenhart]

I know right!!?? LOL

[@BeccaWild]

Seriously!

[@ammaikee]

I was worried about the iPad too 😢

[@pgtrish]

Same! Gave me anxiety! 🤣

[@SuperMikeboss]

Jup omfg

[@amandajs21]

Another tip if you live somewhere hot- wait until your car cools down in the evening or it will melt the vinyl and make it stretch.

[@MakersGonnaLearn]

Great tip! thank you so much for watching 💖

[@georginelegutko935]

What was the transfer tape you recommended?

[@amandajs21]

@@georginelegutko935 I use siser transfer tape from Michaels! :)

[@alecfleming373]

Like wise the reverse advice if you've got a tougher than normal bend. Use a heat gun to stretch the vinyl.

[@susaneisenhart]

Good to know! Arizona lady here, 120 degrees in the SHADE in the midst of summer. Ugggh.

[@l8nightvibes]

I design logos and i make artwork. and cannot wait to start a small business selling my work

[@MakersGonnaLearn]

If you ever need any help creating SVG's or building your business, join Design Make Sell TODAY! Use code "DMS" to save $50! Ending soon: bit.ly/2Jru1cM

[@jessicamckinley8732]

I went to Walmart and looked at that same exact sealer spray but on the can it says for indoor use only??? Is there another kind you can recommend because I can't seem to find anything good that'll work outdoors.

[@pattieldred9678]

Where are the links to the poly spray and the paper transfer tape you mentioned

[@yolisand8780]

How do you get the letters inside first so when I press make the letters cut out and the image remains? I'm using Cricut Design Space and can not figure it out.