How to make car magnets fast and easy

[@RDIdecals]

Our store: rdidecals.com Affiliate links: Graphtec vinyl cutter: amzn.to/3pIrIkS USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn CAMEO 4 (12 INCH): amzn.to/3uy66jc CAMEO PRO (24 INCH):amzn.to/3POgbNO Corner rounder: amzn.to/3JbJQzI Oracal 651 vinyl 12x24 ft roll: amzn.to/46wUTMQ Oracal 651 vinyl 24"x10 yard roll: amzn.to/3ulmXRJ Reflective vinyl: uscutter.com/24-oralite-5300-economy-grade-reflective-film Tape application roller: amzn.to/45apQGa Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow Magnum magnetics 24"x25' : amzn.to/3P6AHdJ Blank yard signs: amzn.to/2IBiGWM RAPID TAC: amzn.to/37ZMl5O Cutting mat: amzn.to/3uidBWZ Blue safety ruler (31 inch long) amzn.to/3slsrKy Squeegee: amzn.to/3bmZK8Q Small magnets to hold vinyl in position: amzn.to/3kdE6bt Cutting knife tool: amzn.to/3sbDTYS Adhesive remover goof off: amzn.to/3eXrNS2 Siser Glitter Vinyl: amzn.to/3u1gnnO Siser color guide: amzn.to/3ZuQJ60 Teflon sheet: amzn.to/3HvhRKx Teflon pillow: amzn.to/3Sheqw1 15x15 heat press teflon cover: amzn.to/42gjt4i Transfer AT75.1: uscutter.com/Rtape-Clear-Choice-At75-100-Yard-General-Purpose-Clear-Embossed-High-Tack-Application-Tape

[@davidfranco1308]

Thank you very much for listing the exact materials you use. Many channels show how you make the item, but don’t list what they used to get the job done. Thank you! Subscribed!

[@RDIdecals]

Thanks a lot David! We do our best to bring the most value, glad to hear your like our content 👏.

[@gersan8056]

Can you please show how you get rid of the back part of the vinyl? Just before you use the squeegee? It seems like you edit that part! Thanks

[@RDIdecals]

Hello! Sorry I did not show that part, we just removed the carrying paper and used a piece of paper tape to hold the sticker against the magnet, the key is using the right transfer and we used the RTape ClearChoice AT75. You can get it here ( sorry about long link ) i.refs.cc/5ByIPrp3?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo3NjAzMjU2NzV9

[@books5039]

Very good work

[@RDIdecals]

Thanks a lot 🙏!

[@susananderson5290]

Thank you so much, the video is awesome!

[@RDIdecals]

You’re welcome :)

[@tonycarrington4426]

excellent video, just what i was looking for .... new subscriber from UK

[@RDIdecals]

Thanks for your support 😎

[@heuliseslopez4204]

Thank you for making this video! I’m impressed 😃👍

[@RDIdecals]

You’re welcome! Thanks for watching 🙏

[@preciouswoodyard2774]

Looks great! What's the name of the tool you used to round the corners of the magnet?

[@RDIdecals]

Thank you! We bought it from amazon and I think is just called corner rounder but it cuts the corners small, I need to find a better one.

[@413printandpress]

@@RDIdecals what size do you recommend i am trying to buy one

[@miriamsantillan3431]

What is the name of your transfer vinyl. I could not find it in the list of materials.

[@AndrewMurphy8383]

What is the name of the device u used to cut the corners

[@RDIdecals]

Hello! You can find it as: corner rounder machine, I will leave our affiliate link in case you want to check it out. By the way sorry it sometime to reply. amzn.to/3AefSKa

[@AndrewMurphy8383]

@RDIdecals it's all good bro life does keep you busy

[@toneyslifestylehustlez8574]

Great video 👍

[@RDIdecals]

Thank you buddy!! 😀

[@5905-k8v]

Can you please list all equipment used we in the UK want to do this

[@RDIdecals]

Hello! Sure, I actually left it on the previous comment you left on other video, let me know if for some reason you can’t see it and I will be more than happy to write it again 😃

[@francisjuarez7342]

No sealant ?

[@debohustle6079]

I just subscribed awesome info. Can you lmk which program your designing a cut this large in please ? Which cutting machine do you have please ? I only have small cricut I don't believe it will allow me to cut this large ...? Any feedback is appreciated thank you

[@RDIdecals]

Hello ! We have a Graphtec CE6000-60 vinyl cutter and it comes with CM3 software buy you will need another software to vector your images or logos. We use Coreldraw for that. Our cutter is 24 inch, cricut is a little small but you can make smaller products. Thanks for watching

[@calumclark1483]

Are the magnets waterproof?

[@RDIdecals]

According to the information we found on the web, they are waterproof.

[@team_sixthree8956]

What do you recommend to use for magnets 🧲 that don’t stick to aluminum cars? Gracias

[@brendanolasco6884]

Donde me recomienda compra estos materials q ustedes usandan

[@RDIdecals]

Hola Brenda! Muchos de ellos estan disponible en Amazon y este es el enlace de nuestra tienda en Amazon: stickeraficionados.com o también los puede conseguir de uscutter.com

[@alondraevaristo15]

No entendi nada por que no hablo ingles pero siempre me entretienen sus videos tios :)♡

[@RDIdecals]

Jaja! Muchas gracias sobrina y pues espero te ayuden nuestros videos a mejorar tu inglés.

[@rodeldejesus7820]

How to order the magnetic vinyl?

[@RDIdecals]

Hello! I will leave our affiliate link to the product. We get the 30 mil, matte finish: uscutter.com/24-digimag-magnetic-vinyl-for-solvent-printers/?ref=StickerAficionado

[@vickiepayten943]

How would you go about mailing a sign to a customer. would you roll the sign

[@RDIdecals]

Hello Vickie! Yes that is how we ship them, we also reuse the boxes we get our vinyls in. You can use a rubber band to hold the magnet rolled.

[@waltervargas8349]

Hola amigo estoy empezando en esta hermosa labor , me gustaría saber qué me aconsejan para comprender más los programas de diseño no se manejarlos, ya tengo todo lo nesesario , en maquinaria

[@RDIdecals]

Hola Walter! Muchas felicidades por haber empezado su negocio, sabemos lo difícil que son los programas al principio, nosotros mirabamos tutoriales de cómo vectorizar las imagenes en KZbin. La verdad no tenemos más que 1 sólo video de el uso de el programa (coreldraw) si gusta nos puede dejar que es lo que le gustaria saber y nosotros haremos un video al respecto. Le invito a nuestro canal de KZbin en español Sticker Aficionado

[@KtuluLeaderRise]

How do you ship them :(

[@RDIdecals]

Hello! We rarely ship magnets, we focus more on selling just the stickers since they are way lighter and easier to ship but I’d probably try a shipping tube depending on how big and how many magnets needed shipped. We use gotprint.com to outsource magnets whenever we need to ship out of state, they do the shipping for you if you provide the customer’s address.

[@KtuluLeaderRise]

@@RDIdecals okay will give them a try, but if you put source won’t the customer know it’s not from you ? Or do they not add any of there company info ?

[@susananderson5290]

❤❤