How To Make Concrete Molds Manually - Building And Installing Protective Fences Around The House

How To Make Concrete Molds Manually - Building And Installing Protective Fences Around The House
Thank for watching my video !
Subcribe my chanel :
/ @sonia7106

[@AP-yd1wz]

Nice to see how to make DIY molded concrete pieces using simple molds. But overall pretty bad build, at least based on what visible in the video. The whole fence is flimsy and would break very easily. I bet it would be possible to demolish it with just one good sledgehammer blow. Fencing posts have no steel rebar reinforcement. They just sit flush on the wall (should have been put to sit inside holes built into the wall, or enclosed into it). Only thing holding them in place at the bottom is the bit of cement placed between each post. And at the top an ultra-thin cement beam with just one steel rebar right in the middle. That's not how to build concrete structures. Might as well go for a wooden fence.

[@Sonia7106]

Thank tou

[@keithrepton2937]

I see the health and safety is working, just love the industrial flipflops.

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@Rs6Quik]

Standard PSE.👍

[@72CrossingRS]

So beautiful!

[@Sonia7106]

thank you

[@angelisoriginals6854]

WaW amazingly perfect and beautiful

[@Sonia7106]

Thank you

[@tientranthe3252]

Hay tuyệt vời

[@Sonia7106]

Thank you for watching videos to share videos with friends to support the development channel

[@_NguyensythiemDTDHHTD]

Nice video

[@Sonia7106]

Thank you for watching videos or like to share videos to friends to support better development channel

[@abdohmohannad3043]

well done ! how long is the column?

[@Sonia7106]

Thank you for watching my video, share my video with friends to support the channel

[@richardmccann4815]

I would say 4 feet tall.

[@quynhkutequynhkute3451]

Nice

[@Sonia7106]

Thank you for watching my video, share my video with friends to support the channel

[@rigobertoosorio7510]

Mucha agua compita

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@TruongTruongLam-gv6ti]

Nike video

[@Sonia7106]

Thank you

[@golfhacker9051]

Very Clever

[@Sonia7106]

Thank you for watching videos or like to share videos to friends to support better development channel

[@creativeability]

Excellent

[@Sonia7106]

Thank you for watching videos to share videos with friends supporting the development channel

[@JustMe-mg6vw]

What was the mold release?

[@Sonia7106]

Thank you for your comments, watching good videos, please share with your friends to support the development channel

[@SuperPercyl]

where can i get this kind of pole/column making frame?

[@Sonia7106]

Thank you for watching videos or like to share videos to friends to support better development channel

[@Sonia7106]

You can create an iron cast and pour concrete

[@Timbo_tango]

@@Sonia7106 How strong is it with no steel inside?

[@sarahnaz4907]

Y spray kis cheez ka krty hy

[@Sonia7106]

Thank you for watching videos or like sharing videos to friends to support a better development channel

[@bonfacesimiyu657]

Do you reonforce them?

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@user-gn7en8gm3k]

Года 2 простоит и развалится от дождей.

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@galgallosora2922]

Which liquid are they pressing on the moulds?

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@villenams]

debe ser aceite

[@xoaaothi9213]

Nice tuyệt vời

[@Sonia7106]

Thank you for watching videos to share videos with friends to support the development channel

[@Aisyah.Sabila123]

Yes god🎉🎉🎉🎉

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@commoncentsamerican]

1 major flaw, NO METAL IN THE CONCRETE!!!! Which equals alot less strength.

[@oscarsantoyo7615]

No veo acero ,,,no es necesario?

[@Sonia7106]

Thank you

[@scottmcdonald6167]

Can i buy the mold

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@user-dq6bx1kj5u]

Ilang oras Po bago tang galin sa ormahan?

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@ashleycutting1982]

What are you spraying in the moulds?

[@Sonia7106]

Thank you for watching videos or like to share videos to friends to support better development channel

[@Sonia7106]

spray a layer of bro oil to protect the mold from damage

[@hakunamatata745]

Wtf is bro oil ? 🛢 Google says its for beards 😆🤣

[@avishnevsky7394]

It can be used car motor oil (cheap option). Although there are special types of oil (?) for frames

[@purshotamapurshotama7168]

Oil

[@yxhankun]

how to make concrete fence from molds... your title is wrong.

[@Sonia7106]

Thank you

[@Rs6Quik]

Not exactly showing you the mold making process, as much as how "they" use them.

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@edilbertozavala3189]

Toomach water on the concrete

[@Sonia7106]

thank you

[@Tankey100]

Why do south east asians like to wear slippers in construction site next to heavy machinery and sharp objects. Answer: ???, eg hate to have too many toes, others 3:58

[@Sonia7106]

Thank you

[@isaganirabara1877]

mixing is inconsistent

[@Sonia7106]

Thank you

[@ironworkerfxr7105]

All that work for poor concrete,,sump test FAIL....way way too much water...

[@maximpimenov3848]

такая туфта... без арматуры, жидкий раствор - чз пять лет посыпится в труху?

[@Sonia7106]

Thank you

[@icculus7989]

There was no.pint in this video where you learn to make a mold

[@Sonia7106]

Thank you

[@AugustKling]

Mask?

[@Sonia7106]

Thank you for watching the video, please like and share to support better channel development

[@AugustKling]

@@Sonia7106 Perhaps the next video without any masks. I stand for freedom.

[@manh1315]

Nice video

[@Sonia7106]

Thank you for watching my video, share my video with friends to support the channel

[@tiemnguyen8204]

Nice

[@Sonia7106]

Thank you for watching my video, share my video with friends to support the channel

[@quangpham-sn1pz]

Nice video

[@Sonia7106]

Thank you for watching my video, share my video with friends to support the channel

[@TienNguyen-kh2go]

Nice video

[@Sonia7106]

Thank you for watching my video, share my video with friends to support the channel

[@khongbiettao842]

Nice video

[@Sonia7106]

Thank you for watching my video, share my video with friends to support the channel

[@xoaaothi2885]

Nice video

[@Sonia7106]

Thank you for watching videos to share videos with friends to support the development channel

[@jinsejoon420]

Nice video

[@Sonia7106]

Thank you for watching videos to share videos with friends to support the development channel

[@aothoan1569]

Nice video

[@Sonia7106]

Nguyen Hung Thanks ! ❤️❤️❤️