How To Make Cribbage Boards Step By Step Using The Rockler Cribbage Board Templates

[@marcuspullan1142]

Thank you for not showing the drilling of EVERY hole, as some people do. Nice, clear directions/hints

[@oldeshed]

Thanks, Marcus!

[@Anconeusify]

Keep it up! Awesome woodworking.

[@oldeshed]

Thank you very much!

[@heyimamaker]

Not sure if you ever had issues with the bit clogging up. But if you enlarged the hole in the bit to 9/64 it will basically never jam up. Before the modification I had to stop every 3-4 holes and clear it out. After the modification I did 40 without an issue. I also replaced the inner bit with a a higher quality bit. I need to try the tape trick, I had some others recommend it to me. Nice work, keep it up!

[@hayesclawson6387]

What was starting thickness of the boards you did and what did you end up planing them down to? Any change of heart wishing you made them or started with a different thickness? Love your design. Trying to build a few wedding gifts for friends with some old growth redwood i got from a free deck tear out. Just Cornhole boards, mini bar, cribbage and other small games.

[@oldeshed]

It depends what I have in stock on the rack. I put the colors and thicknesses together and glue them up. Whatever thickness I end up with when I plane them down is pretty much it. The base needs to be thick enough to allow for the depth of the hole for the cards and pegs. Thanks for the nice compliment and for watching my videos.

[@DorothyOBrien-Suto]

where is your shop located?.... can I buy one of your cribbage boards directly from you....

[@oldeshed]

Can you send me your email address?