How to make custom rims for your Modified Power Wheels- Part 2

Due to popular demand here is our version of a how to video on creating one of a kind custom wheels for your kids car. I hope I covered all the steps on how this deep dish mod is performed. If you have any questions leave comment below. Here are links to the products used in this video. We are Amazon affiliate members so when you make a purchase from these links it provides us with a small commission that helps make these videos possible.
Fat Daddio 9x3 pans- amzn.to/2XNJZjZ
3M panel bond kit- amzn.to/2VLyis3
Milwaukee multi tool- amzn.to/2tVbTwH
Milwaukee jig saw- amzn.to/2NRyN17
Kid Trax dodge ram- amzn.to/2NQJxwI
Peg perego gator axle- goo.gl/QKMThU
1/2 drill bit- amzn.to/2NZicZr
~-~~-~~~-~~-~
Please watch: "Mini Wedge Racing- Thunderbird Raceway 10-14 yr old 08-10-19"
• Mini Wedge Racing- Thu...
~-~~-~~~-~~-~

[@samsgarage1716]

Nice job

[@CustomKidzCars]

Tx

[@samsgarage1716]

Custom Kidz Cars Garage this is my new favorite channel.I just started doing KZbin last summer and I like building go karts for my kids.

[@socal_c10]

Thanks for the help just lifted a power wheel and lookin for custom wheels this helped a lot

[@chrisvandenheuvel6493]

Are there kits available for lifting powerwheels/rollplay rides?

[@CustomKidzCars]

Nope, would need to custom build the lift and use tires from a model with larger wheels like the jeep hurricane

[@maryphoenix3661]

Great idea.it’s going to make a big difference.

[@Jblake808]

It came out great man, nice work!

[@CustomKidzCars]

TX

[@Jblake808]

Np..I love to see great work. Have you done any Ford Raptor wheels?

[@CustomKidzCars]

No and that might be problematic as it's a two piece rim

[@guywhoknows]

Hey they look good. I did see when you posted this but only popped back to have a watch... Both of you guys show a hard way, yours was a lot less dangerous! I have knifed my fingers open using a craft knife on plastic. :( Lathe, foamfiller (expanding foam) And PU17. And a 3d printerer..;) I've been doing a CAS system over at my Facebook. (Crash avoidance) hey if you want great cars you've got to protect it.. and the children of course.

[@ErnD0gg91]

Where do you order another set of wheels? I haven’t found much.

[@puppapump]

Hello from the UK.. Excellent video and thank you for sharing. I'm a fan of your work especially Hellram! I would love to do something similar but there is a lot of work involved. Can you do a how to video on the steering axle. Kid Stance did one but my sons steering rack is different (basic Chinese car) TIA

[@jackrzhai5516]

Hey, buddy, tell me about the transmission.

[@RSPORTMEDIA]

I NEED YOUR HELP PLEASE... just came across your KZbin page . WOW absolutely brilliant my daughter is gonna love this routine channel. Ide like to get in touch with u about wheels for my daughter ford ranger wildtrak. Iam from the uk and nobody over here wants to help me. I need new wheels and would really be very grateful if we could have a chat . Thanks

[@dadezgambino177]

Can you make "swangas" ? Lmk if you can and if you sell them, I got you my man 👍🏽

[@angelparra256]

Where I can get the 3d print cups ?

[@balex4481]

Do you have a website or contact info. I need a set of these

[@amfoxx7633]

I like this video

[@ryankeener3432]

What would you charge to do all four wheels for this same truck? I also thought about trying to mount lawn mower tires and rims in the front and doubled up wheelbarrow tires and rims in back. The problem is the hub that goes into the motors on the back. I thought about having the hub machined or maybe just cutting the plastic one off and bolting to the metal wheels just dont know how well it would hold up

[@CustomKidzCars]

U would be adding a ton of rotating mass and the added traction will end up breaking your plastic gears. Like your idea but I would just use the lawn tractor rear axle and make it a torque monster.

[@HomeGrownPyro1]

Pretty damn creative I love it👍

[@te72garage]

Have you done any EVA tires that are Foam Rubber I recently bought a Toyota Tundra from big toys direct and want to do the cake pan wheels but don’t know the foam rubber is bonded the actual plastic inside and if it is ok to cut a half inch before the foam rubber

[@CustomKidzCars]

We have no experience deep dishing the EVA wheels. Pretty sure it is molded onto the rim.

[@oneeyemonster3262]

I use 13" dolly wheels ..the bearing's iD is 5/8". ( 5/8" ID tubbing or copper pipe as sleeving..might have to tape a little on orginal shaft to make the sleeving fit snug..but it'll be riding on ball bearings and rubber tires. Just make an adaptor with 1/2 Plywood..so you can easy mount the wheel to it. Cut the slot accordingly to fit the gearbox drive sprocket... Im personally using old electric wheel chair motors...it has wazzooo torque. Just have to removing the rims's bearing..and drill holds to fit the hub... Run it on 8s lipo....I tested it already. It did around 8mph on 90 lb brick of a wheel chair on 10" tires..it'll have plenty of torque to pull 13" wheels on a 35lb toy....10mph there about ( I dont want my kids doing more than 10mph on a TOp heavy toy ( they're just kids)..You can g.et 32-50v go kart ESC for $30-$40... I notice yesterday...WASHING machine gear box with same size shaft as the dolly's Bearing...There's Options...I have wazzooo of Mic stand ( musician)lmao They're just kids..it just has to carry 125...at most.

[@kcapalot9995]

Do u make the wheels or can I buy them somewhere

[@CustomKidzCars]

We don't make them, we custom order them from 3d prints, his email is in the video.

[@tommymartin364]

I had someone approach me wanting to do this. Where did you get the actual rim? He's wanting me to 3d print them

[@CustomKidzCars]

Link in the video description. Very first link

[@tommymartin364]

@@CustomKidzCars im sorry I saw that after the comment. Thank you though

[@jacethompson5703]

That’s cool

[@Slickk_Rickk561]

Do you build wheels and sell them??

[@CustomKidzCars]

Sorry we do not. The axle and spindles also need to be customized.

[@aymanejaz7555]

Baby car ghr m banye tu wheel jorny ka tariqa batyi jo mazbot reh wheel

[@btookz]

I have a c7. How and where did you cut the axle.

[@CustomKidzCars]

It all depends on what your deep dish is. U need to install the wheels and make note of your setup

[@jorgecholula5319]

I LIKED ALL YOUR WORK JUST ONE OBSERVATION , WHY DIDN´T REINFORCED THE TIRE? , BECAUSE WEIGHT´S KID TIRE COULD RESULT DAMAGED

[@CustomKidzCars]

These fat dadio cake pans are super thick. In all honesty these deep dish pans are more or a show car look and not meant to be daily driver wheels. My kids liked to drift and wore out tires in two days, lol. Thanks for watching.

[@EL_CHIINO]

Do you guys sell any wheels?

[@CustomKidzCars]

No, u can't just sell rims, you need new axle and spindles too with the deep dish.

[@EL_CHIINO]

@@CustomKidzCars do you sell that?? Im working on a Mercedes benz for my son and i would like it to look good for car shows

[@CustomKidzCars]

Nope, we would need the car to cut and fit the axle and spindles. We do full builds not parts.

[@EL_CHIINO]

@@CustomKidzCars ok thanks

[@AtomicAlma]

Have u thought a bout making a drag car from bottom up with a go kart engine or something

[@CustomKidzCars]

we considered it until we realized it would only have forward without adding a massive transmission to gain reverse. We have been wanting to try a peerless transaxle that has gears built in. Stay tunes as you never know what crazy stuff we will do next. Right now with dirt kart season closing in we are working on getting the karts put back together.

[@yeseniamacias662]

I dont hv all those tools sounds complicated

[@CustomKidzCars]

It is a more advanced mod for sure.

[@rsz90182]

What's the point?

[@CustomKidzCars]

Custom look and can match the wheel design of your full scale ride.

[@MisterBrownJack]

First!!!!