How To Make Electronic Components Tester

[@신태진-w2g]

Why do you need the 1x3 terminal block? You don't seem to connect anything to the block terminals

[@sanjaykhatri6093]

Can we measure the value of ceramic disc cap 104 with this tester

[@Plasehelpmetogetsubsthankyou]

were is the code 😜

[@alextoskov3765]

github.com/kr4fty/Ardutester i'm not sure if it is this one tho

[@Untukmencariilmu]

@@alextoskov3765 Cannot run on i2c

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@cmakubika]

Code is not running in Proteus simulation. Gives error message "Controller received command while busy". Also, an include file "stdint.h" which is meant to be in the same folder as the main Ardu tester.h is missing from the posted zip file. Is it an omission or an error in the include call?

[@YuukiAkbar]

hey i tried to use it with i2c lcd interface but its show nothing just a block on the lcd, and the serial monitor is blank.. any idea? thanks

[@MrJdeb79]

Where did you found the code.

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@KiyanisLab]

use simple 16x2 lcd

[@MrJdeb79]

@@KiyanisLab thanks

[@RandomFAI]

What is the measurable value of the maximal component

[@1Motivation-videos.]

Hello, I have a few questions. Please help me: How did you calculate the resistors for the circuit, and why did we not use i2c?

[@sidharthps7611]

Is there any maximum value for resistors or capacitors that can be tested using this circuit...

[@artificialzaman5155]

Can we check inductor too with this?

[@KiyanisLab]

yes we can

[@goldenbird4756]

I don't have 680ohm resistance. How much Ohm's registance should I use instead of 680ohm Registance?

[@RandomFAI]

how come this tool can find out the component it is measuring, for example resistors and other components?

[@satishchandervaish6268]

Aap ne iska code to diya hi nhi,where is arduino code of this project

[@the0135749ify]

πολυ ωραιο αλλα μου βγαζει σφαλμα στον κωδικα # error Invalid Parameters : use LCD PRINT or DEBU

[@ayanmandal8111]

ardu tester search karo mil jayega.... isne to copy kia hai

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@carlosisasmendi1731]

is there any made with display by i2c

[@CranFIN]

It's giving this error: ArduTester_1_13.ino:158:22: error: macro "lcd_refresh" passed 1 arguments, but takes just 0

[@Sekhar_Home]

The ArduTester_1_13.ino is based on 16*2 LCD or lCD 128*64. pls rectify. also U programmed with version 0.7 but u giving here 1.13. why. This is not mean for 16*2 lcd.

[@MrShahanwer]

Code doesn't match with 16x2 LCD even pins not defined?

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@Sekhar_Home]

@@KiyanisLab you are false

[@nenadsmail]

You have error in diagram. Connection from D13 and D12 need to go A2, and D8 and D9 need to go to A0. I lost two days to figure out what the problem is. You can find right diagram on other videos on youtube. Thanks anyway.

[@Inquire98]

"Wow", this is REALLY kool 😉 Thank GOD, and thank you for your support and time 😎

[@nasirallahdiya]

how to calibrate ArduTester v1.13

[@dirkbackvis9737]

@Kiyani' ki lab, can i get the code? alex toskov your code does not work.

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@kpshashi3254]

ardino code ?

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@ashishjogi3561]

Sir, this circuit can me use a arduino nano??

[@ApexDelta77]

#error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT please help

[@TheRealMaxPower]

Very good, congratulations. Could you do this with a Lcd keyboard shield?

[@ananthakrishna3376]

Sir please tell Why we use 680 and 470k resistor combination

[@richardgarcia3072]

Hello Kiyanis, i want to make your components tester but can you tell me if the only code to enter in the arduino is Ardu tester1.13 thank's for your response cordially Richard

[@juliusparker3039]

Please ,the Nano version and code

[@proteekbasu2562]

No change in code required for nano version

[@alextoskov3765]

github.com/kr4fty/Ardutester i'm not sure if it is this one tho

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@KannaA237]

It shows error after upload, .h error appear, pls help to upload code in uno, and display shows only box in first row, I'm basic in Arduino

[@theshreedybreedy8448]

Please use I2C interface between LCD and Arduino.

[@naeemhaq3504]

this project designed by you?

[@wasimahmed7488]

Can i check smd capacitor.?? Plz answer

[@KiyanisLab]

yes bro

[@ricardovazquez2827]

Calibration procedure? thanks in advanced.

[@SandipDas-ct3dl]

Kiyani's Lab.............2 days ago you have made a over-current protection circuit................................can this circuit auto cut if output is shor-circuit ..........I mean somehow Neutral and Phase line is connected......plz. reply....

[@sahilsharmadec25]

there r lots of videos on youtube on shot circuit protection ....... better to be watch great scott , electroboom, or kesyan tv channel for better and best understanding and knowledge

[@jigarmistry1838]

How to calibrate for accuracy.

[@apaajalaah172]

Please, I will like all your youtube videos

[@supuntharaka3267]

Super..👍👍👍 Code?..🤔🤔

[@alextoskov3765]

github.com/kr4fty/Ardutester i'm not sure if it is this one tho

[@usbrepairsaid2034]

@@alextoskov3765 thank you

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@habibzaghdoudi705]

ا Good work

[@shadrack6467]

Constantly just restarts with testing...... selection: transistor. Testing..... I've rebuilt the circuit 8 times with new wiring etc every time to ensure no broken wires etc. Flashed with 3 different versions of Arduino IDE. Same thing.

[@due204]

Hello, could you pass us the code please? Thank you.

[@alextoskov3765]

github.com/kr4fty/Ardutester i'm not sure if it is this one tho

[@due204]

@@alextoskov3765 Muchas gracias. :D

[@consolegamingoriginals]

@@alextoskov3765 Yes, it is. Thanks a ton.

[@balajinali4993]

@@due204 bro please pass the code

[@due204]

@@balajinali4993 Hello, the code is in the description.

[@mehmetkirac6690]

Can you give the libraries?

[@CranFIN]

What is the name of the ino file?

[@cmakubika]

How do you upload code to ARDUINO?

[@henricoderre]

Where is the code for this project. I can't find it.

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@shrikantnikam2426]

Search for Mr tech inventor he made simplest component tester

[@utpalhalder2468]

Inductor valu?? Showd??

[@1miina]

The code and why the variable resistor.

[@skarifhossain1879]

Variable resistor is use for adjust LCD brightness but where is the programming code?

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@MrJdeb79]

Dear sir i have tried 100 times but the scetch in getting uploaded...please make a viseo as how to upooad th3 scetch

[@rafiul1522]

Can I test smd components with this

[@KiyanisLab]

yes

[@rafiul1522]

@@KiyanisLab tnx

[@vaghasiyadhaval9171]

arduino sd se damage resistor ko kaise check

[@sajidmohammad3190]

Please make a video on explaining Types of MOSFETs and their working principles.

[@toontalesx]

Can you make simulation video on it

[@KiyanisLab]

ok bro

[@cafenetpars646]

when you put a videos on your channel you are responsible for answer the question about it too many people asked you about the error "#error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT " but you didn't answer it. it seems that you just answer to " thanks comments"......

[@KiyanisLab]

sorry for that bro i receives thousands of comments which makes it impossible to answer every one

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@nareshjain5339]

Dear friend, what's the uses of others code in rar file

[@akhilshukla2221]

Block Diagram 7:18

[@jonathansilvavareiro2031]

Can this system test SMD components?

[@KiyanisLab]

yes bro it can

[@Drxxx]

Good video

[@krishnagupta4574]

What software use for this project

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@jigarmistry1838]

Coding upload procedure not provided

[@Prabhuguru-kk2iz]

Arduino code in error brother do you have a correct code brother 🤔

[@alisubhi5611]

The video explanation is different from the chart, and there are many mistakes. I tried it myself many times

[@cookwitharti1332]

I need code of this program

[@خالدباشميل-ب9و]

this message error appear : ArduTester:81:4: error: #error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT #error Invalid Parameters: Use LCD_PRINT or DEBUG_PRINT how solve this error ?

[@shahelectronic4509]

Code upload nahi ho pa raha hai error code

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@pitpuppies]

I am not good at code I put in the code but has lots of errs lots of not declared in scope

[@diyexplorer8728]

Cool project bro

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@خالدباشميل-ب9و]

the code is not work correct can you help me??

[@KiyanisLab]

let me check bro

[@manojgohil6496]

Sir make videos on cvt stabilizer

[@blackking3314]

Okay 👌

[@siddhantpatil9306]

Sir pilce simple 2sc5200 Tranister amplifire 100watt hommed.

[@akashasbro3913]

How to measure resistor

[@KiyanisLab]

just place it between two test points

[@3aris]

thats wrong info. you are using v0.7 but u giving v1,13 and program looping transistor selection

[@danielemencucci9931]

Arduino software?

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@shrikantnikam2426]

Can you make code for i2c display

[@KiyanisLab]

ok bro soon

[@michellecloydannetanada1994]

what is the potentiometer used for?

[@KiyanisLab]

for LCD brightness

[@Randorandom232]

@@KiyanisLab can we replace it with resitor if we know the value of brightness we want?

[@Budho8434]

@@Randorandom232 yes

[@habilekgopti9449]

plz give us the code to make this project

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@shubhankarghosh]

ESR is not showing

[@Marian-RXZ]

brilliant !

[@the0135749ify]

πολυ ωραιο αλλα μου βγαζει σφαλμα στον κωδικα # error Invalid Parameters : use LCD PRINT or DEBUG PRINT

[@emreozen5708]

wrong code its not working.upload the one you used in the video.

[@علاءبيترو]

،👏👏👏👏👏👏👏👍🏻👍🏻👍🏻👍🏻👍🏻

[@bapsy1]

Where is the link to the software?

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@SULTAN-rl6rj]

Code?

[@alextoskov3765]

github.com/kr4fty/Ardutester i'm not sure if it is this one tho

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@allhelpyou1232]

Howe to make wireless mic🎤

[@livebangla2723]

Ardutester v0.7f code please sir

[@slametteguh2050]

maaf saya pemula (newbie) untuk code yang mana ... Itu ada 56 file saya bingung 🤔🤔😢 Terimakasih

[@pathansamirkhan7347]

👌👌👌

[@50_mansijadav19]

Hlw sir Can you provide code for this project ?

[@KiyanisLab]

Check description

[@balajinali4993]

@@KiyanisLab link is not working !!!

[@satishkumar-gg5fm]

Ardino code kha h ?? Bina code ke iska Kya kre?

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@shahelectronic4509]

Code error bata raha hai

[@midulrahmanmidul175]

Code.. Plese.

[@bishaldas3653]

Sir can u provide us ardunio coding plz

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@rajeshtandelu8248]

Where is aurdino program

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@mikes3801]

Where is the code??

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@mikes3801]

@@KiyanisLab thanks for the code. The only problem is that the LCD won't show anything. I check all the wires are correct. Is there an additional library I need to install?

[@donaldcharlesfernoughty1260]

@@mikes3801 adjust trim pot its for lcd contrast

[@ardy7mustika672]

sir, how do I upload the coding, there are many choices, please make a video uploading the esr coding, please sir

[@mr.techinventor3463]

I made step by step checkout my channel

[@supunelecro]

Code link ? 🤔

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@DilnuwanAmaraweera]

cored pls

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@DilnuwanAmaraweera]

@@KiyanisLab thank you

[@leranelectronics1539]

there is no code???

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@علاءبيترو]

👏👏👏👏👏👏👏👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🌼🌼🌼🌼🌼🌼🌼

[@mustafah-alrubie4909]

sir where is the code??

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@amarnathsharma1657]

bhai component testeer to kam kr rha hai lekin tollerence bahut jade show kr rha hai

[@sahilsharmadec25]

do u have the code

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing

[@amarnathsharma1657]

@@KiyanisLab yes but thios code is running autometicaly random charactcher and random numbers as t1 t2 t3 t4 t4 capacitors

[@SULTAN-rl6rj]

Code dijiye sir please

[@KiyanisLab]

main file is ArduTester_1_13.ino drive.google.com/file/d/1JvoCrPrySNgqGIY0590Tn9vgyd1u1mWj/view?usp=sharing