How to Make F-16 RC Jet with 70mm EDF and Fly it

[@brandonrunyon]

Legit engineering skills right there, the kinds of things I wish I could build as a kid. How fun.

[@Fuze_Oni]

Kebetulan lewat di beranda ytku dan ternyata yg bikin ini org indonesia wah mantap om

[@kennethwhite9720]

This was glorious! I was glued to the screen through the whole video. What a tragic end for such an amazing build! Absolute talent! And very inspiring I think I might give this build a try! I’ve been wanting to fly a jet in fpv!

[@joebennie6042]

Really Jules,this is my favorite plane,because it looks great and has a great lift to weight ratio. From micro’s to 1/5 Skymaster and they all fly the same. Glad to see no flying Stabillators,makes for more precise pitch control. You Sir are in a class beyond us! Spectacular to say the least!!!

[@barqwoof]

Always amazing to watch a master designer and builder. The nature of our hobby is sometimes there are failures but believe me when I say, your creations are remarkable. Jim

[@JuliusPerdana]

Thank you very much!

[@muhamadnurodhi7723]

Saya sangat yakin bang julius ini akan menjadi orang besar dan terkenal

[@JuliusPerdana]

terima kasih harapannya

[@BenErikNess]

It did fly, hope you find time to build it once more! I'm still waiting for the next 747-400 episode!

[@garyhilson7220]

You are absolutely brilliant as a craftsman, engineer, design engineer and MASTER MODEL BUILDER!!!!!!!!!!!!!!!! You inspire me!!!!

[@JuliusPerdana]

Wow, thanks!

[@felixsrcworld5112]

waw... kerenz pas terbang rada ke bawah.... Overall scale banget om gread work atau awesome 👍👍👍👍

[@rcbinchicken]

Brilliant work as always! :D The editing style of weaving between the events of the flight tests and the different steps of the build was very clever, more like a professional TV documentary! I am amazed at how good the finished F-16 looked, and while it is infuriating that it crashed from a cut cable, it is good to know that there was no inherent fault in the design. Did the EDF unit and the other elctronics survive the final impact?

[@JuliusPerdana]

thanks, yes they are good for the next jets

[@angell.aristizabalmora1560]

@@JuliusPerdana . where can I get the decals? do you make them?. Please let me know how to do it.

[@JuliusPerdana]

@@angell.aristizabalmora1560 check description

[@fluksbyyy587]

@@JuliusPerdana wkwkwk bang Gue dari indo nih.. Btw itu dijual ga

[@aviationunlimited4353]

Amazing replication of one of the most difficult rc models to build. Great F16 project. Next you should do a JF17 Thunder model !

[@nunubagjas1740]

keren abis om Julius, mau terbang baik ataupun crash, saya salut pokoknya, mantap dengan analisisnya..salam KAI om..dari penonton setia channel mu.

[@JuliusPerdana]

trims om, makasih udah mampir

[@xgaming2229]

i always like it, when i see unfinished fuselages, especially of f16s. This is just beautiful! I like it!

[@martinlagrange8821]

Thanks so very much for this wonderful film, and the plans so generously shared ! You've allowed me to now build my Christmas slope soarer - very much obliged, and with huge thanks ! 😀

[@aerorocha9751]

Bom dia um aero muito bonito parabéns que pena que lenhou mais faz parte parabéns

[@dante66ccced4]

Exzellente Arbeit mit solch einfachen Hilfswerkzeugen. Was wäre erst, wenn Sie Modellbauwerkzeuge hätten? Daran erkennt man, dass Sie wirklich ein Künstler mit Materialien sind.👍👍👍

[@JuliusPerdana]

thank you

[@dante66ccced4]

It is two o'clock am in Germany, thanks for your qickly responds. I will send you a picture of a beplane I build in this month. It is a brittish World War I biplane SEM 5, you will know it. I have to load it on my smartphone to send it. Good by

[@kuninggame1000]

Wuhh mantap om . Mesin jet nya beli di mana itu

[@JuliusPerdana]

makasih, link tokopedia ada di deskripsinya

[@Youdontwannaknow..]

Been waiting for this for a such a long time . Good to see it finally released. Thank you very very much

[@adiplatAD]

Sy suka bagian mencetak kanopi nya , kakak... jos

[@TegoSuwarto]

saya hanya bisa bilang kagum Mas Julius

[@GLeAnimal]

Wah sangat mantap sekali kapal nya kak salam sukses selalu ya hadir menyimak bos ku semangat

[@JuliusPerdana]

terima kasih

[@어뚜벤춰]

f-16을 직접만들다니요~!! 대단합니다. You are a great producer. It's amazing!

[@JuliusPerdana]

thanks

[@thorinoakenshield663]

Amazing! Looks like the real deal when it’s up in the air.

[@JuliusPerdana]

It does! thanks

[@AsifKhan-wx3ns]

very very awesome sir . great job and get so many lesson for me and for us all in this videos for crash reasons . salute to sir Julius Perdana .if there is reason to visit Indonesia that will be you Mr. Julius Perdana. have a nice day sir.

[@colincollier3355]

What another amazing build Julius. You have such great talent. I feel so sorry for the sad ending to the flight of the F16. I hope you rebuild or repair it with more success. Congratulations on your KZbin award. You thoroughly deserve it. I'm looking forward to your future builds.

[@JuliusPerdana]

thank you :) I will use the parts for Yak-130

[@coffcraft]

I was crushed for you when she nosed into the ground. Ya gotta rebuild her some day. I'm working on one now. You gave me lots of stuff to think about before flying. Thanks and keep building. Happy flying.

[@JuliusPerdana]

You can do it!

[@wartobock]

Wow so beautiful work but I feel so sad about your crash. So much work and such a beautiful plane. I stopped counting the same that happened to me because of electronic part malfunctions, sometime intermittent, so harder to find. Now I triple check and test everything and I don't trust anymore BEC on ESC or plastic gear servos on expensive planes. Many thanks for sharing.

[@felipesantana3431]

Julius Great work your videos are amazing. You show the effort, the success and the bad time. This is part of a human routine. I love your projects. Thumbs up dropped from Brasília Brazil. ( If possible for you please consider building the Airbus Beluga )

[@JuliusPerdana]

I appreciate that!

[@scotabot7826]

Your talents continue to AMAZE me Julius!!! Keep up the great work. You are a inspiration for sure!! Thank You Sir!

[@JuliusPerdana]

I appreciate that!

[@MickB235]

Another amazing build from the master craftsman, sorry to see it crash after all that work but I look at it this way too , when it happens and it is moderately or severely damaged, it immediately opens the door to learning and experimentation with different techniques and to see where things can be improved. I'm not far off finishing my build of your Cherokee design and can't wait to fly it. Looking forward to your next project and curious to see how that immense 747 is coming along. Cheers mate

[@mirzawaseem2006]

Good to know that you are also making Cherokee. I have also built a Cherokee but still i don't get time to put on the required electronics on that. Share me your email or Facebook's id. I will post the pics on that.

[@eren_fe]

THANK YOU SO MUCH JULIUS YOU REALIZED MY DREAM OF BUILDING F16 YOU'RE VERY TALENTED .

[@blackmamba3427]

From failures comes success. Well done!

[@tapenagiuniversity1551]

Immediately a fan after i saw this. You are a really, massively talented person, bro. Syabas dan tahniah dari Kuantan, malaysia. Those film people who are making dog fight war films should hire you. I would if I was one. Ha!

[@SohailKhan-yw3np]

Hello sir I have this tow 70mm edf 2845.kv2750 motor lying around I want to install these two motor in one plane so what is the best battery for it can lift weight well I will wait for the reply and how much C of the battery is required

[@chrissmith5148]

can it be wrapped with 20g/m cloth and epoxy?

[@DIY_RC_Planes]

This Edf unit have 4.0mm plug like the esc? Im asking because I can't find information about it anywhere. I know that Esc is 4.0mm but I don't know EDF.

[@JuliusPerdana]

yes this FMS 70mm EDF has 4mm banana plug

[@VTOLKits]

Sorry for your loss, hope you can repair it and same time you could add thrust vectoring. Maybe you wouldn't loss the control with T.V. Thumb up!

[@AsifKhan-wx3ns]

YOU ARE THE BEST SIR JULIUS .

[@jasperdebruin8203]

what sort of receiver and transmitter do u use? or what is needed for this airplane?

[@jwc4520]

Circle of life with model flight , build , fly , crash, build ... with age the process becomes more of a challenge. It was an awesome build a real beauty... so guess it's time to build another. I have built several of my pet project ...all have been destroyed so I work on fixing the problem ... but this time I shall let a younger pilot have the stick... take care and keep us inspired with your awesome models .

[@AndreSilva-jq9kq]

wonderful great tutorial, in fact a beautiful beautiful construction jet model was worth JULIUS for another great project.

[@JuliusPerdana]

The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/juliusperdanapaperreplikarcprojects11211 Playlist : 00:00 Opening : taxi test 00:23 EDF 70mm setting 00:41 Canopy : making mold and molding clear canopy 02:56 Wing with 3mm depron 03:49 Horizontal Stab how to install 04:53 Ordnance details (Missile and Drop Tanks) 05:33 Decals : Printed Vinyl Stickers 06:40 EDF Cheat Holes 08:44 Battery Tray : a pair of 3S Lipo in series 09:39 Fuselage : how to make fuselage from foam 13:31 Covering foam with laminating film 15:31 Making vertical stabilizer 16:14 Installing servo 16:55 Crash Analysis 17:29 Closing You can download the plans on the link below : A4 Plans : paper-replika.com/RCplans/PR-F16_A4.pdf A0 Plans : paper-replika.com/RCplans/PR-F16_A0.pdf A3 Decal : paper-replika.com/RCplans/F-16_Lone_Star_Gunfighter_decal_A3.pdf

[@ronaldcheeseman7400]

Julius flying jets is a new ball game, you have to keep the jet, flying when landing you are a beautiful builder Happy Thanks Giviing to yours Col. Ronald

[@JuliusPerdana]

Thank you sir, happy thanksgiving

[@ronaldcheeseman7400]

Julius I know now where hacker is soon I will have him and I will sponsor you have not forgot U.

[@haiherry]

Wow! That's a high level craftmanship for scale model, Julius. Was the bigger wing quite effective?

[@dronepilot4life]

You do a great job on your builds. Thank you for putting out the plans for your planes.

[@JuliusPerdana]

Thank you very much!

[@duongo1778]

i really love your design but is there any way to fix it smaller a little bit ?

[@lapakhoror]

Selalu keren masnya, salut 👍🏼😊

[@superpela1]

Julius, the plane looks amazing, again you went to the top of craftsmanship. A lot of details, would you take and advise? Next one don't install all the tanks and missiles, just try the plane and see how it behave. Again the plane looks awesome 👌. Looking forward to see the big ass jumbo on the air.

[@LMP-R]

Man you make gluing the foam look sooooo easy, it's a learned skill I have found, my DC-3 look ROUGH lol.

[@RC-planes.]

Anyway its good that you chose the wing,for the next build, because it will be much simple tu build, thanks for the plans by the way🙏🙏

[@JuliusPerdana]

No problem 👍

[@abdelalimdebilou3238]

I can't find the foam that you are using, is there any other way around that?

[@russellhamer8690]

Julius You are a Genius ....

[@alexw766]

Terima kasih banyak Pak, darih UK.

[@JuliusPerdana]

sama sama ☺

[@johnmarktamano8834]

congratulations Julius. You inspire us to build and build.

[@demetriusvasconcelos5866]

Very beautiful all your projects. His explanations allow a beginner to easily build any of the projects. Thank you so much for sharing your knowledge. If you can, please build the Brazilian Saab Gripen. God will reward you.

[@JuliusPerdana]

Thank you so much!

[@ReyCarmesi666]

Este wey es talento puro,mis respetos .👍

[@ddaero3001]

Matap om jull teruss semangatttttt

[@colinwhite144]

I'm watching you the way you make this model a hell of a lot of work went in to this plane sorry for that crash it must have been deverstaing all the hard work your brain must be very advanced to build project like this I wish I could do something like this your a very clever guy. I'm in proses building f22with cardboard I got plans on phone no mesherments so I had treble up and do it by eye had one mesherments of wing span I'm 73yr old it good to see clever people like your self. I wouldn't even think of building something like what you did great stuff it was very interesting watching your video

[@divyajnana]

BUMMER! Great job, beautiful plane.

[@mdriyasatali]

Amazing making bro 💓💓💓🇮🇳🇮🇳🇮🇳

[@lucaspoole8866]

That is absolutely AMAZING MY MAN WOWWW ALL I CAN SAY IS WOW!!!!!!!!!!

[@mohamadtawalbeh716]

Dear Sir thank you for your perfect efforts in this work , but may provide me with a diagram that illustrate how to connect parts to gother , for examle part F1 , f2 , F3 .... are in same place and its location ?

[@neptuneatlantic4883]

Been a subscriber from the very beginning. Always said you’re the best at this Julius. Simple design and material. Hope you win the contest cause you sure deserve it. I’d love to see you make one with correx.

[@JuliusPerdana]

I appreciate that!

[@aerospacematt]

Can 3mm Foam Board (Adams Readi-board, used on Flite test planes) be used for this project?

[@Jupes-if9nx]

Could you please tell me how much foam you used because i would love to build this for a school projekt but i dont know how mutch i need to get and dont want to get too much. but it looks really cool:)

[@jasperdebruin8203]

Is the instruction in the website coming of not? I cant see how I need to build the body of the plane is that right of did I look too bad?

[@JuliusPerdana]

there is no build instructions on my website like the other models, this build video is the only guidance you have

[@nurazmyaziz2411]

Bang klo dibeli kira2 lepas harga brp?

[@AG12990]

Julius ypu are amazing and I am a big fan. Dont worry about the crash. You are still amazing and we will wait to see another F-16 flying. Keep rocking.❤

[@proxd2990]

Soo cool model

[@jimroley8387]

AWESOME BUILD JULIUS!!!!! THANK YOU

[@JuliusPerdana]

Glad you like it!

[@ParaglidingManiac]

Super cool plane! But is there an assembly instruction for your plans? Too many parts to understand which goes where. Parts have id numeration on them, which gives a possibility for an instruction? Help, please:) Thank you!

[@vinushobby]

What a craftsmanship !!! marvellous

[@ulisseslirola]

i'm very happy to see your creation was perfect i'm from brazil i love to watch your videos i'm now making af 16 based on your project i've seen and rewatched the video several times and in my opinion i think it was because of a tilt in the position of the air outlet duct the reason for the fall of the beautiful plane you made congratulations on your videos

[@JuliusPerdana]

thank you, the accident caused by elevator cables were suck by the EDF and snapped, so I have no control of the jet pitch

[@HaznieModelAviator]

Congrats Om.. Hasilnya superb 👍😍

[@JuliusPerdana]

thank you om

[@chuentenglim7669]

Cantik pesawat RC ini

[@heliotoledofilho4878]

Wow... congratulations.... one more amazing, fantastic RC airplane... I've already downloaded the A4 plans in the Internet to build it in the near future. I just not found the decals. Please, where I could download them? Thak you!

[@chilarai1]

Superb work my man, as usual. Really get pumped up by your videos.

[@JuliusPerdana]

Thanks a ton!

[@pungkysasando3346]

Mantap Om Julius 🛩️🛩️🛩️

[@JuliusPerdana]

thanks masbro

[@JuanRivera-du9oc]

What excellent workmanship and magnificent creativity and construction, your F-16 has nothing to envy to the manufacture ones. A shame the loss of the model but what a good experience. Thank you for sharing the drawings that I had waiting so long for it. Good luck.

[@JuliusPerdana]

thank you

[@erad05]

Amazing what you can do! Thanms for the i ytrjctions. And I'm sorry for the crash.

[@phucgiarc3651]

Hi, I am planning to build this F16 with 75cm wingspan and tail pusher. Do you think it will possible to fly well?

[@JuliusPerdana]

yes you can

[@phucgiarc3651]

@@JuliusPerdana thank you

[@khandakermiraz5823]

Sir your build is extremely good. Please make edf scale mig 21

[@nitrox4163]

Absolute master piece

[@franciscobravo6850]

Donde o como se podrian consequir las plantillas para las piezas de foam?

[@aeromunhoz1]

What role do you use in covering? Is it transparent and paint over?

[@JuliusPerdana]

paint on the inside side

[@MuhammadFahadmir]

Great Work Sir, Highly appreciated, Thanks for your efforts, and best of luck for the next Craft (I'll be waiting).

[@Envelektronik]

have a nice day. Is there a detailed video of the production process?

[@JuliusPerdana]

no only this video

[@SADLADTV]

I knowi know this video is 2 years old, can you tell me what size servoless retracts needed?

[@tanmay_paul_06]

Sir i really enjoyed your content everytime. I am from india , where you are from ❤️ . I wish i could also make one but currently I am preparing for my medical entrance test . Be safe be healthy 🙂

[@bobmumby845]

Awesome model another trip to local model shop

[@JuliusPerdana]

thanks

[@natiknatik317]

Your channel is beautiful, my friend, and your videos are amazing. I salute you from the land of Iraq🌷

[@reyadv160]

Your TOM the cat is so cute and adorable ❤

[@JuliusPerdana]

thanks, he's in a better place now

[@cheepingpo1954]

Hi Juluis: Awesome design and build! I would like to know where I can download this F-16C plan. Thank you

[@JuliusPerdana]

check descriptions

[@cheepingpo1954]

@@JuliusPerdana Thank you very much! I found it.

[@gameflyingrc]

You're very good at using foam sheet to make an F16 plane, and I only need 4" thick grade A foam to cut the F16 fuselage.

[@adnanasghar1681]

Been waiting for this for a such a long time. but finally an amazing jet from Julius and thanks to proved that's type of beauty to community :)

[@JuliusPerdana]

Glad you like it!

[@larryegilman1]

Julius is a brilliant creator, and has to be one of the more amazing contributors to the radio control hobby. How can there only e 48 k subscribers

[@JuliusPerdana]

Thank you, there are 2 types of my audience, hobby guys like you and others that only watch for entertainment, looks like I lack on entertaining side.

[@larryegilman1]

@@JuliusPerdana Julius, you lack absolutely nothing

[@randitya3071]

mantep om... klo build full pake polyfoam 5mm berat ga om?

[@JuliusPerdana]

iya jadi agak berat

[@jaffry5663]

i'm anxious to see the channel reach 50k subs, in order to watch the video that you promised to us about building our own design using blender and pepakura! By the way... congratulations about your F-16! amazing!!!

[@the_skeleton4ik566]

hello, can i put 90mm EDF in there with the submitted drawings?

[@JuliusPerdana]

yes you can

[@JRIVERA1124]

The 747-400 is next when for the EDF electric to be done and when , please thank you very much......be safe..,.

[@kusukacolaylowlee1611]

Ati2 ditembak kkb om!