Materials and equipment to use {This post may contain links from Amazon or other affiliates. If you purchase through any link, I may receive a small commission at no additional cost to you} Online platform Canva: CANVA: partner.canva.com/e445o1 Inkjet printer for colored design: amzn.to/3yMY3h7 Laser printer for the foil area: I use this one DELL B1160w amzn.to/42kyDFe but you may use any laser printer. For example, this one amzn.to/3TlrpNj Laminator QFUN de Amazon: amzn.to/3JKtxKb Reactive foil: amzn.to/3lqt2N1 Printable cardstock: amzn.to/3Jke0QS Copy paper 20lbs: amzn.to/3ZUfdoZ Guillotine: amzn.to/3LAw9fZ
@AagiiOogiii10 ай бұрын
😮s5yav0v00vc7😅2g
@jojoalingabo3790 Жыл бұрын
Miss Daisy, this tutorial comes right on time! I’ve been breaking my head on trying to figure out how to apply foil to cardstock, I’m so grateful for this video. Thank you!
@veronicajordan5191 Жыл бұрын
Thank you your video is very detailed and you explain it full. I tried to watch a few videos and they were all over the place. Thanks
@AliWade19718 ай бұрын
This is a beautiful design. I am researching whether I can save money by using a laminator for foiling, rather than buying a specialist hot foiling machine
@socialhero13 Жыл бұрын
Thank you for all the info !!!
@missy52696 ай бұрын
Excellent tutorial Daisy. Thanks so much for sharing all your acknowledgement!
@gitali Жыл бұрын
Very helpful and informative tutorial! Thanks for sharing your knowledge!
@gawainfraites79949 ай бұрын
Nice, clear and concise video
@cindzdgtlcreations3 ай бұрын
Can I use the same canon printer on the ones you printed on laser printer?
@zeeniyazulfikar58456 күн бұрын
Excellent video 🎉. All the best. Subscribed
@lauriekonkol8956 Жыл бұрын
Wow! This is amazing! Thank you!!
@kimhandy1861 Жыл бұрын
Wow! That's beautiful 💕 Thanks Daisy!
Жыл бұрын
My pleasure ❤️ I am glad you enjoyed it
@notimetowork Жыл бұрын
Stunning card!
Жыл бұрын
Thanks so much!
@tdiez.2167 ай бұрын
From Vietnam thank you so much for tutorial Daisy
7 ай бұрын
You’re welcome 😊
@yesselcastillo7158 Жыл бұрын
THANK YOU THANK YOU THANK YOU! SO easy to follow! And my project came out awesome my following your steps!! ❤
@shubhamsharma-cw7xi Жыл бұрын
Mam you are life saving person, I'm sesrching how to deal with foil from the last 6 moths, thank you soo much, and your hands are soo beautiful😊, thanks once again, thank you soo much.🌱
@nadiacastro79963 ай бұрын
I loved your video! 😍 I'm subscribed now, keep up the good work! Bless you 😊
@melodysales3595 Жыл бұрын
hi did you do the cricut tutorial for this?
@unmaskedmeph3446Ай бұрын
is foil only trigger on black prints ?
@ueki00783 ай бұрын
Great idea❤
@renee9765Ай бұрын
Hello, thank you for this. I have one question. I do as you say and duplicate and don't move anything when I print with the laser printer the text comes out in the correct place but the border moves and comes out not centered as it was on the original and I can't figure out why this happens. Can you help me please.
@dianalama15916 ай бұрын
You make it sound and look so simple. I shall try it after watching your video once again and taking notes🥰👍
@cazaaroma8 ай бұрын
My printers wont aline the two correctly, its driving me crazy
@Kacordon7 ай бұрын
I have the same problem! Did you find a solution?
@user-bi8ko7kc6h6 ай бұрын
Make sure both of them are print in actual and center the pieces so you get the same gaps on both sides. However, different brands’ printers have different borders settings, which many don’t allow you to change it.
@shemsimatador72333 ай бұрын
It is much more difficult when you have same situation with 2 side printed sheet. I do this on Konica minolta C6085. It's A3 format printing press for high quality and big volume professional printing.
@rav7ss4238 ай бұрын
Very nice tutorial ❤
@LANDE336 ай бұрын
Omg this is amazing ❤❤
@caroltrimble273810 ай бұрын
Beautiful
@sugarrayaj85683 ай бұрын
You're a genius
@marcofabian2687 Жыл бұрын
really nice presentation love it 🥰
@amandanewbould27084 ай бұрын
Can I use the same technique for label sticker paper?
@zarsblackhorse1238 ай бұрын
why did the foil get applied on the text and border only but not the design? Can anyone explain please?
@yosraben47708 ай бұрын
I also want to know
@picturegiftuk7 ай бұрын
Because colours were printed on INKJET printed but text on LASER printer
@ashleighniriain6 ай бұрын
Foil only reacts with toner (laser printer), the coloured section was printed using ink (inkjet printer). Thats why 2 separate printers were used.
@chrissib2104 Жыл бұрын
I'm using this same method with a holofrapgic foil... but after like 24 hours I get little blotchy spots in the foil... what could be causing the blotchy spots to show up? When the foil is freshly done it looks perfectly but not long after little blotchy spots start to show through the holo foils? Please help
@karen3490 Жыл бұрын
This is beautiful! I am going to investigate the other uses for a laser printer before I make this investment.
@razinaalli5555 Жыл бұрын
God bless you for sharing❤
@emem74943 ай бұрын
hello, how thick is the paper? 200gms?
@madameMABO8 ай бұрын
Love your videos❤ it helps me a lot
@ranajauo1055 Жыл бұрын
Can this work on napkins too?
@letmwander5 ай бұрын
NICE❤ CAN I USE ONLY INKJET PRINTER CANON SINCE I DONT HAVE LASER PRINT?
5 ай бұрын
For this process we need both Inkjet for the color and Laser for the foil.
@Kandio925 ай бұрын
If foil a day or two later will it still work?
@Sravankumar-qi5dc Жыл бұрын
Thank you very much ❤
@1230sandrag9 ай бұрын
So the laser printer is needed for the foil to attach to the writing and NOT the design? Can you explain why you need to use 2 different printers..
@junenic589 ай бұрын
The laser powdercreacts to the foil. If you do the whole card with a color laser printer the foil will adhere to everything. By using a inkjet first, the foil will not adhere to inkjet prints.
@1230sandrag9 ай бұрын
@@junenic58 thank you 🙏🏽 I am new to this and your video was amazing!!
@janetjohnson9143 Жыл бұрын
can you print 110lb card stock from inkjet and laser printers you have listed for this project?
@LS-du7ot8 ай бұрын
I have about 200 invitations to make. I want to print about a day or so in advance. If I foil a day or 2 later will it still work?
@kirstyleigh4399 Жыл бұрын
Mine always come out the laminator with black patches from where the foil hasn’t stuck. Do you know why this is? I place the card and foil inside a folded A4 sheet of paper before running it though
@meriemali50685 ай бұрын
god bless you your a life saver
@ThuyVo-in5ij Жыл бұрын
Hi love. What laser printer are you using? ❤thanks
Жыл бұрын
Hi, the links are in the description above ⬆️☺️
@nihadbellaali5148 Жыл бұрын
Hello, thanks for this video. I wonder which kind of paper did you use ? I didn’t understand, I see two different kind of papers linked in the description box but in the video you only talked about one. If I want to do this, I need to find paper for both injekt and laser printers but I found nothing… can you help me please 🙏🏻 Thank you 😊
@system3318 Жыл бұрын
Can we still use inkjet for tge design printing and black printing?? We don't have laser printer?
@nerdshit Жыл бұрын
You need a laserprinter for the black ink, otherwise it won't work
@designdeepa Жыл бұрын
loved the tutorial!always wanted detailed tutorial on how to use canva,create design,print n use a laminator too n so happy that u covered all the topics in one video!!!appreciate it so much.just one question...im a newbie...i do handpainted cards but would love to introduce foil in my cards.i have a laser printer...canon pixma pro 100.wont that do both the jobs of printing the colored design as well as the text? id appreciate a reply 😊🙏
@junenic589 ай бұрын
No, the foil will adhere to the whole thing if you do that.
@krystinemaevillaflor5684 Жыл бұрын
Hi! Can I use Vellum paper instead of Photo Paper?
@dmendmen7397 ай бұрын
Printer must be inject?
7 ай бұрын
For this project, we use both.A laser and inkjet printer.
@magichand-oz5lw Жыл бұрын
but what im searching is how to apply some foil design at the same of some ink design by using cut machin
@mrkkhan42632 ай бұрын
Wow🎉❤
@magichand-oz5lw Жыл бұрын
im having a hard time to apply foil on some i,jekt design , like how Sticker Guru do
@emem74942 ай бұрын
i make the same but gold foil doesnt apply 100% on printing details, i set 180 degree celsius
@purposebydesign228 Жыл бұрын
Love it 😍
@RosslynGonzales3 ай бұрын
Pardon my ignorance, Why do you have to print the color design and the black and white letters separate? 🤔
@khrystianiekyeneactub23183 ай бұрын
The second print is a laser printer that uses a special ink, which is toner. Since the gold foil reacts to toner ink.
@Jerly-kf3md5 ай бұрын
Can someone help me? No mather what I do, it never comes out perfect, it always has black points.
5 ай бұрын
Hi, try to use two sheets of paper instead of one and let her machine preheat to its highest setting. Hope it helps…
@Jerly-kf3md5 ай бұрын
Thank you, you are an angel. I did that and I also changed the paper like you did, because I was using one thicker 120g and that helped too.
@baskimerkezi235511 ай бұрын
THANK YOU
@kathrynkemp1101 Жыл бұрын
Any tips? I'm getting an imprint of the whole foil on my card (not just the lettering) 😞
@NBPPOP9 ай бұрын
Are you sure you got the right type of foil? Because if you’re using hot foil instead of reactive foil your problem happens.