How to make High voltage transformer from CFL lamp 1kv | DIY Transformer 1000V flyback

in this video i will make a high voltage transformer from old cfl lamps
high voltage transformer are very usefull for many project this transformer can output upto 10,000V (10kv) AC Voltage is very usefull then DC voltage you can use it to power your voltage multiplier this is a simple inverter Circuit that can anyone build
⚠️☣️☢️⚠
️↘️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️↙️
.⏬how to make Flyback driver 13003⏬
.☑️ • How to make Darlington...
⚠ warning ⚠
🚧🚧🚧🚧🚧
Don't touch any high voltage
power supply It has risk of burning🔥
and high-voltage can kill you please
before try to get close to high voltages
put glub in your hand
#High voltage
#10,000V
#Voltage
#Power supply

[@Electronic_For_You]

I Don't know why but some people Disliked This video 😊 If You Have any problem with this video you can ask 👇👇 Me in comment i will try to solve it

[@michaelcarson2155]

New knowledge from this vid thanks it would be very useful for me.

[@Electronic_For_You]

I'm very happy that you found my video useful ❤️ you can check more inverter videos ....!

[@victoralessiodemoraisnossa4547]

Congratulations on the video, very nice! Keep striving and always learning!

[@Electronic_For_You]

Thank you for Support ❤❤

[@electroniclover2900]

Great video Really I like this video

[@Electronic_For_You]

Thank you 🥰

[@RixtronixLAB]

Cool info, thanks for sharing :)

[@Electronic_For_You]

♥️

[@shelbysurya5736]

They disliked because the voltage is around 1 to 1.5 kv not 10KV

[@Electronic_For_You]

Sorry About that 😔 I can't measure high voltage Multimeter limit 1KV

[@shelbysurya5736]

@@Electronic_For_You bro no one measures it We all take a estimate by the breakdown voltage of air that is around 2kv per mm If your arc is established(formed) at 2mm then the voltage should be around 4kv. Breakdown voltage of air also depends on humidity and temperature but the average is around 2 - 4kv per millimetre. And I said the distance when the arc is formed ,it does not include how much you can stretch the arc. By the way your videos are fun to watch and you also do some efforts in making them , keep it up bro 👍.

[@Electronic_For_You]

Thank You so much bro Your feedback will help me to improve my videos ❤️❤️❤️

[@lifeai1889]

"no rewinding" Lol

[@Electronic_For_You]

Yeah 😅

[@pulse7960]

Good idea

[@Electronic_For_You]

Thanks friend 😊

[@athulvdas5736]

How to make fly back driver and how does it work 6:15

[@Electronic_For_You]

Ok I will do

[@athulvdas5736]

@@Electronic_For_You OK, nice video

[@Electronic_For_You]

🥰

[@mrGoD884]

brother can you plz plz tell me how can I remove insulation of wire plz I tried with all steps but they didn't work

[@Electronic_For_You]

Burn with lighter

[@mrGoD884]

bro I tried but not worked

[@safetysecond55]

I Don't have 2 CFL lamp Only 1 i have 😢

[@Electronic_For_You]

You can use other transformer core

[@kalashnikov_47z]

Great video Can i use small transformer??? From Phone charger

[@Electronic_For_You]

You need to find secondary coil...

[@trung12309]

nooooooooo

[@Electronic_For_You]

Yeas but phone charger transformer can't take input upto 6V ☺️

[@lorriecarrel9962]

What does it do taking out the air gap in the ferrite core?

[@Electronic_For_You]

It doesn't Oscillate well

[@athulvdas5736]

What is the Mm of the secondery copper wire

[@Electronic_For_You]

0.2-0.5mm

[@rajithamahanthu3470]

Good Can u make transformer without core ?

[@Electronic_For_You]

Yeas But it called warless transfer 😇 I have a video check it

[@rajithamahanthu3470]

@@Electronic_For_You can u please send me the link

[@Electronic_For_You]

Ok ❤️ kzbin.info/www/bejne/npfbkKZ5gsaDaLM

[@aaqibshah600]

Do u use it for your home use or just it was a time pass project only..

[@Electronic_For_You]

It is just For My Viewers ❤️👌

[@UnknownBoy-ri1ts]

can i make stun gun ring for pranking? with this circut

[@Electronic_For_You]

Yeas put diode on output and a 2kv cap

[@GaaneJaaneAnjaane76]

Why there is no sound and arching when you short the output? There should be a huge corona at the output short circuit site. Have you measured the output voltage ? Is it exactly 10KV? Please do that in front of the camera.

[@Electronic_For_You]

Sorry about that.... There are very loud Noise at home so i can't turn on the mic and the voltage is not 10KV sorry again for that...... ( Video Title Edited) to 1KV Thanks for your comment ❤️❤️

[@shoking9825]

its probably very high frequency so that you cant hear it and if the arcs look feathered that means its even higher in frequency than normal

[@Electronic_For_You]

Yeas Because the circuit set its frequency by his own

[@shoking9825]

@@Electronic_For_You the frequency is changed by what size the wire is and how strong the magnet is and alot more stuff in terms of yours its going to be high frequency for the small wires and semi-strong magnet

[@Electronic_For_You]

Yeas

[@electroboommini6951]

Show me output voltage Its not 10kv

[@Electronic_For_You]

1kv

[@1.5v29]

220V??

[@Electronic_For_You]

1kv 10,00 Volt

[@Crowley9393]

All this will do is waste your time. It will short out because of poor insulation. Why not take some time, be safe, insulate your coiled "ware," utilize spellchecker, & have pride in what you're doing. A circuit diagram should be included, better description of the wire wrappings & the direction.

[@Electronic_For_You]

Sorry about that It was my starting video And back then i don't have that much ideas ...... And now I'm trying to improve my videos Thanks for your valuable feedback 😊

[@Crowley9393]

My apologies. If this was your beginning vid, you did excellent. Keep up the work. Thank you for taking the time out to make the instructional vids you do.

[@Electronic_For_You]

thank you so much bro 😊 Have a nice day ✌️

[@16BITMEME]

10kv DC or AC

[@safetysecond55]

I think its AC

[@Electronic_For_You]

Its 10kv AC......

[@IoannJWazir]

It’s spelled wire

[@Electronic_For_You]

Sorry 😔

[@IoannJWazir]

@@Electronic_For_You it’s ok, just saying

[@Electronic_For_You]

❤️❤️❤️❤️

[@IoannJWazir]

By the way, great video

[@Electronic_For_You]

Thanks 😃

[@16.iputugedeoktaganendra44]

what components do you use?

[@Electronic_For_You]

Check my other videos...!

[@16.iputugedeoktaganendra44]

@@Electronic_For_You Already

[@16.iputugedeoktaganendra44]

@@Electronic_For_You Can I use IRFZAAN Transistor and 100 Ohm . Resistor??

[@Electronic_For_You]

Yeas but the input current will be vary high its better to use A NPN BJT not Mosfet

[@16.iputugedeoktaganendra44]

@@Electronic_For_You can use transistor 41, if the resistor usually uses 100 Ohm

[@maisuskh6211]

Bro u can get this type of arcs just by using a picofarad capacitor wtf are u wasting ur and others time

[@Electronic_For_You]

Watch my latest video ..... That will be enough for you bro "ZVS Arc" and BTW this is my very old video