How to make my cardboard M3A1 Grease Gun

[@topwashgod6570]

That hook in the stock is to help load up a magazine of your M3

[@giorgigarsevanidze6334]

"It isn't a giant Tec-9! It's an M3... Goddamnit.." LMAO

[@wags5837]

Mann,let’s make a sten gun or something that look cool in cardboard.

[@frostedflakes.08]

Little hook on stock is for magazine loading to push down spring loaded feeder plate

[@treenguyen749]

That hook on the back is a magazine loading tool for the single stack magazines.

[@damiensarmoury3014]

Magical your amazing keep up the great work

[@SideSpoon]

Can you make a balisong or infinity pistol(from borderlands 2)?

[@Magicalamazing]

I'M FIRST

[@gameatronftw1643]

Magicalamazing dammit, you're first.

[@servers5717]

Hello

[@sasaradovic4297]

You should make a m1

[@vexsolar7320]

mAkE a SHoTgUn yOu KnoW yoU wAnt To MaKe A ShoTgUN

[@averyfletchervlogs4035]

Magicalamazing hi

[@aliyyahnafanaf3832]

Nailed it.

[@Vrx0709]

Looks amazing and the Hook is for loading the Magazin

[@marshallberserk5060]

hello this is magical amazing here to demonstrate how my cardboard gun works XD

[@cumlord8203]

You should really paint you’re guns they would look sick the model it self is borderline perfect and you should make an M1 Garand

[@zachmmm6565]

OH god I'm such a gun nerd i love this thing nice job

[@xxtentacionjr4470]

The best peastmaker

[@CwkbbTutorials]

sickkkk

[@janreznak881]

Great stuff! A couple of questions: 1/ How long for a noob to do? Say M1911, M-4, and a SAW? 2/ Can you paint them?

[@Magicalamazing]

Thanks! :) 1- I don't know how long it would take someone else to build the guns I build. It depends on how often you make mistakes or just how fast you work. 2- You COULD paint them, but paint never really looks quite right on cardboard. I find leaving it up to your imagination makes them look better in the end.

[@tavintru]

Yessss finally!

[@danielqueiroz6723]

What is the type of measure u use (centimeters, etc) on your baseplate?

[@river4626]

That hook might be a sling holder?... Maybe

[@tsw_instinct4169]

Can you make a mauser c96 or a luger po8

[@beesh0s454]

you_mad _bro 2005 I second

[@s.bhattacharjee8175]

Nice vid bro...Please make an pump action shotgun

[@wideeyedprofessor2528]

Nice work........... you are amazing thats why you are MagicalAmazing

[@kennedysheetmusics9382]

good friend M3A1 if I really loved your videos a supplication you can build a rifle M1 GRAND of cardboard

[@aljanvivar8016]

GARAND not GRAND.

[@kxmidaya3515]

Actually, it's GARAND and Not GRAND

[@luminous5]

That's probably the stock lock for stopping the stock hammering on to the body of the gun

[@Magicalamazing]

The hook on the stock is a tool for assisting in loading the magazine.

[@aaronmoore7674]

You should make a suppressor for that like the one in cod ww2

[@wendellpo3814]

I see u working very hard on ur how to make vedios, I really appreciate the hard work u put in keep up the good work bro

[@fazedemon2451]

Dat bolt doo!

[@darkmendes5864]

*The Perfection B)*

[@nmfilmarts5764]

MAKE A CARDBOARD FIVE-SEVEN!!! IT'S MY FAVORITE HANDGUN!!

[@akuna-rank6-colonel-404]

Hey you probably forgot me but, and this my opinion but you should make duplicates of them and sell cuz ik me and plenty of others are to lazy to build these XD

[@tzudongemzz7079]

Nice......😘😙😍🌅

[@psst873]

*Hello to all my Viewers, this is magicalamazing*

[@CARDBOARDCREATIONS]

I think you forgot to cover the corigation on the front sight

[@Magicalamazing]

Its layers of uncorrugated cardboard. Usually I don't bother covering the edges of those types of pieces. They don't look too bad as is, but I'm sure it would be better if you wanted to spend the time doing it. Like I said though, I'm lazy sometimes.

[@CARDBOARDCREATIONS]

Magicalamazing ok, no prob. I just wanted to let u know in case u forgot

[@pottowomut7665]

hey magical , that was a very good gun tbh but can you make cardboard g36c and aug a3 ? these guns are very popular you should do it :)

[@ionutmanea982]

The hook is for reloading the magazine with bullets

[@deadpool_gamer-zn8px]

Do one that shoots Trying do do paper warfare with freinds

[@talalomar4648]

Can you make a tutorial of m249 saw gun? please reply me?

[@christiankintanar1866]

Sten gun mk2 please 😊

[@night2957]

will the next ww2 sub mechin gun be the p-40? to add to m3 and the PPSH

[@slee1004ify]

AW I was so early tho... anyways! Can't wait to make this out of cardboard! I have this interest in WWII guns so this makes me happy lol. Thanks for the tutorial. Luv your vids, please pin this..

[@trstn262]

Nice video dude keep making this content

[@phanthithanhbinh7131]

I need Micro UZI NOW

[@KEVIN-mk7dm]

Can you please do meszur the gun and the cardboard so we can know what size

[@powermiro]

do a sawd-off shotgun

[@aliyyahnafanaf3832]

hey MagicalAmazing you have make a lot of gun prop for us in this year of 2017 but because it is almost new year now,can you make a video about making those gun that you have make as a prop but upgrade it so it can also shoot rubber band,paper bullet or BB bullet for the next year?the year of 2018.because if you can do it you might make this channel get upgrade to the next level.like all of your gun but I want it also can shoot.

[@jorge-jf5fr]

Well what about a beretta model 38 from ww2?

[@KEVIN-mk7dm]

Can you please make a hi point 995 carbine

[@user-if6ov9fh9g]

I want you to make a cardboard kriss

[@garrettmcalister6233]

Can you make a ksg shotgun

[@satellitesilent5905]

Make a cardboard H&K G36

[@tsura-]

make the micro uzi tutorial

[@vexsolar7320]

Lol at the end you got a little bit triggered at our opinions

[@CARDBOARDCREATIONS]

Wut

[@desnecessario5188]

Can you make a tutorial for m200 or other sniper rifle please?

[@psst873]

Can you make a Bolo knife?

[@cardboardgunsmith6480]

How long is it

[@kidslara9289]

Can you an mp40

[@templarknight1119]

How could I modify this project and make an original m3? Also, is it okay if I paint my cardboard guns if I made one according to your tutorials?

[@Magicalamazing]

Go ahead and build whatever you like, that's why I made these videos! As for making an M3, the only major differences are to omit the indents in the bolt and add the charging lever. I think the rear sight might also be a bit different. I'm not sure I could be of much help with connecting the lever to the bolt though, that would take some experimenting.

[@templarknight1119]

@@Magicalamazing Hi there again, I'm still wanting to make the M3. I did find pictures online and Drew it out using a lightbox app on my tablet following your scaling instructions. The main thing I haven't figured out yet is how to make the lever push back the bolt. I have sent links to some KZbin videos showing how to make slot machines or gumball machines out of cardboard to see if maybe we can figure out a way to make the lever work. Here they are: kzbin.info/www/bejne/opLZoHmtm5mYZtE kzbin.info/www/bejne/g4TFdZRoo7V8jMk kzbin.info/www/bejne/ppOzY2mYqJqKnK8 Also, here is a demonstration of how an actual M3 works: kzbin.info/www/bejne/pnjJd3inaKynj6c Thanks for listening!

[@generalkenobi4509]

Hate to be that guy but the guide rods are supposed to go to the back of the gun (havent watched the full vid yet so idk if he did that for the mechanism)

[@Magicalamazing]

This is a non working cardboard model. I attached the guide rods at the front because it was easier to do so. Because they go all the way down the length of the receiver and you can not see the inside of the rear of the gun, they still look close to correct regardless. All they do in my model is hold the orientation of the bolt so there is no need to support springs all the way to the rear of the receiver tube.

[@generalkenobi4509]

@@Magicalamazing oh ok, thanks for responding! If you did make a functional one, would you put the guide rods in the correct orientation and use springs or a rubber band?

[@Magicalamazing]

@@generalkenobi4509 If I could find decent springs I would probably do it the way the real one works. Using a rubber band would be more complicated, but also possible. That said, I would also have to make a working trigger/sear to hold the bolt back. Again possible, but I couldn't be bothered lol

[@generalkenobi4509]

@@Magicalamazing ok lol. Im actually making a lego M3 rn and I hope it turns out good :p

[@loolootheworm8089]

Make the micro tavor

[@themadkraken1912]

Wait... Wait... How on Earth did you roll cardboard!

[@Magicalamazing]

If you remove one side of the cardboard from the corrugation it easily bends. I have a video on that if you are interested. kzbin.info/www/bejne/fHaVqWyXfrx-rNk

[@christopherhill1920]

Would you consider doing a commission for a tutorial on a Sig Sauer 556 and/or a Steyr Aug a2. I’m serious I will pay you to build one and post a tutorial how to make one of those

[@artistki6435]

hey i was just think that when should make a cardboard community on discord or idk you decide if u agree

[@syedimranhaider9422]

Please you make him without print

[@corvo1776]

I love these guns but every time I've tried making one it looked like something my dog shat out

[@willhealey1903]

I am probably stupid... But do these guns shoot?

[@Magicalamazing]

Nope, just models

[@willhealey1903]

Ok. It would be too hard to make these work I guess. They are still probably some of the best guns I've seen out of cardboard! You are too skilled to just be on KZbin. You should consider opening a cosplay shop or something like that. You are LEGENDARY and... Magical! I want to make these but I would probably die trying...

[@tsura-]

it isnt just a giant tec 9... its an m3.... god dammit

[@gameatronftw1643]

Early squad.

[@luminous5]

Actually the grease gun was a cheap gun that came before the Thompson m1a1.

[@Magicalamazing]

As soon as the Thompson was adopted in 1938, the military began looking for a replacement that was cheaper and easier to manufacture. In 1942 the M1A1, a simplified and slightly cheaper version of the Thompson was adopted. At the same time, the M3 was being tweaked and tested but wasn't fielded until 1943, a year later. That said, the gun I made is an M3A1 which didn't see service until after the war.

[@fin78_]

Fallout new vegas?

[@oguez1837]

Where did you found the templates ?

[@Magicalamazing]

kzbin.info/www/bejne/r2TTmaSVjLCBors

[@beesh0s454]

Please please make a luger po8 please I'm begging you please

[@kilderargueta409]

Did anyone notice the cover is taped down

[@Magicalamazing]

I taped it down while i was building so it wouldn't flop around too much

[@SL1GHTS_auto]

I’m the latest comment that’s not 2 years ago

[@AKG-Soldier]

The next gun is the AK 47 please

[@Pablo-lh3zj]

hey hermano porque no haces un fusil fn fal

[@AKG-Soldier]

Please craft the AK 47

[@aljanvivar8016]

Its 2019... is he still alive?

[@kilderargueta409]

Maybe

[@templarknight1119]

Hi there again, I'm still wanting to make the M3. I did find pictures online and Drew it out using a lightbox app on my tablet following your scaling instructions. The main thing I haven't figured out yet is how to make the lever push back the bolt. I have sent links to some KZbin videos showing how to make slot machines or gumball machines out of cardboard to see if maybe we can figure out a way to make the lever work. Here they are: kzbin.info/www/bejne/opLZoHmtm5mYZtE kzbin.info/www/bejne/g4TFdZRoo7V8jMk kzbin.info/www/bejne/ppOzY2mYqJqKnK8 Also, here is a demonstration of how an actual M3 works: kzbin.info/www/bejne/pnjJd3inaKynj6c Thanks for listening!

[@griefix7404]

5th

[@averyfletchervlogs4035]

Hi

[@gustavodelgado8386]

Las Malvinas son argentinas

[@thetattiescones6633]

Try do this with metal

[@JesusVelasquez-xc2ni]

The next gun is the AK 47

[@talalomar4648]

You didn't reply me. Why?!

[@Magicalamazing]

I'm not going to make any videos on how I made guns that I built years ago. I don't really want to make them again.

[@talalomar4648]

Why you forgot to make m249 saw?

[@talalomar4648]

I mean tutorial.

[@Magicalamazing]

I built that gun over 6 years ago, well before I started posting videos on KZbin. I was never planning on sharing my guns until I started youtube, and I didn't start making tutorials until a few months after that.

[@talalomar4648]

Don't do that please? Make tutorial or I will write your name in death note. Death note Fans.

[@luizfer1827]

1337