How to make outline jewelry | Gold Acrylic | Glowforge

[@trissachaney793]

I love your videos, I just ordered my GF and used your referral code. I will definitely be tuning in!

[@TroytheMaker]

Thanks a Million! I appreciate it more than you think! I hope you enjoy yours as much as I do mines!

[@dapinkmic]

I saw your Glowforge commercial!! I’m so proud of you! Thanks for being an inspiration.

[@TroytheMaker]

Haha. Thanks a Million! I'm trying my best. 👍🏾

[@marnygriffin2591]

Yes please make more tutorials like these,. Thank you

[@TroytheMaker]

Will do!

[@onetime9012]

Awesome video!

[@TroytheMaker]

Thanks

[@merrymacmurphy]

i really enjoy your videos. i always learn a lot. thanks for making them.

[@TroytheMaker]

Glad to hear it!

[@josephculbertson3555]

Great project Troy. I had the same problem on acrylic. They are just so many honeycomb in the crumb tray. I fixing to try to make another crumb tray that doesn't have a lot of points where the laser can hit the material you are using. I'll send u a pic when its finished. Take Care.

[@TroytheMaker]

Thanks a Million! Ok

[@taraduffy3261]

I would Love to see the tutorial of the outline elephant.

[@musicchickart7046]

Cool! Would love to see more!

[@TroytheMaker]

Thanks. Make sure you’re subscribed and hit the bell.

[@reniebee1231]

You are doing a good job I watched your first video to this one and you are improving in every aspect of your business keep it up you are a big part to all who are creators.

[@TroytheMaker]

Thank you so much 🙂

[@craighatch3221]

I’m a fan, thanks.

[@TroytheMaker]

Thanks! I appreciate it!

[@ijeomanelly626]

I just discovered your videos and they are 🎉. What's your Glowforge machine or model?

[@earlwilliams565]

I would like to see a tutorial on making outline jewelry.

[@TroytheMaker]

Haha..Good One

[@gresev2588]

Great job! Beautiful!

[@TroytheMaker]

Thanks a Million!

[@SoapyNews]

Hello Troy, Your videos are very instructive, thank you so much for taking the time. I do have a few questions. I am thinking of investing in that machine. 1, Are you still using the basic one? I am looking into making acrylic soap stamps (usually 3mm deep engravement in acrylic (unless you could suggest another material could be possible) and also rubber stamps to print on fabrics & paper. You think this is possible to do so? Also I would ove to engrave directly ...soaps. Mind trying if its doable with the machine and see how deep it can engrave?... Would love talking about it with you before buying. Let me know if possible :) please flag me for the answer, I don't know if I will receive any notifications...

[@MakingwithMarilyn]

Great video!

[@TroytheMaker]

Thanks! Glad you enjoyed it!

[@taiwannahooten4737]

Amazing 👍🏽❤️ love it you did a great job!!! #1

[@TroytheMaker]

Thanks a Million!

[@MsSpunkydee]

What is the name of that acrylic and where did you get it? New Glowforge owner😊

[@blingwithd9745]

❤❤❤ awesome 👌

[@TroytheMaker]

Thanks 🤗

[@ScottRedstone]

Hey, where can I see your Glowforge commercial? Thanks for explaining the contour function. I used it to create some nice wood inlay.

[@TroytheMaker]

kzbin.info/www/bejne/qaaccmqXhb2rqck Glad I could help. I use contour and smart fill all the time.

[@eveschannelm748]

Hello first time viewer here 😁 I'm a stay at home mom & really like how you're showing us how it works. I'm thinking of buying me one & start a side hustle. Where can I get one & how much? Thank you for sharing your ideas I really appreciate it 😊

[@TroytheMaker]

Awesome! Thank you! You can use my referral what you save Glowforge will send me the same amount. glowforge.us/f/QWABAKFC

[@eponymousIme]

That was fascinating! Have you done (or will you be doing) any laser-cut jewelry project out of Ultrasuede (*not* leather)?

[@TroytheMaker]

Honestly, I haven't heard of ultrasuede, but I will do some research on it. Thanks for the suggestion.

[@michelemcknight4406]

I have bit went through all of your videos yet and you may have done it already but have you made earrings ?

[@TroytheMaker]

Yes I have kzbin.info/www/bejne/q6qyl6pvoZ6botE

[@advosetexas7988]

Thanks for sharing

[@TroytheMaker]

Thanks for watching!

[@prit402]

I was curious to know, does your mirrored acrylic stick to the sheet once cut where you have to kindof push it out or does it just fall right out?

[@TroytheMaker]

i use 160 speed full power and 150 speed full power when I have small cut out pieces because they do stick to the sheet.

[@Saracgarcia09]

Hey Troy, Just found your videos !!! It's exactly what I was looking for. I am thinking about purchasing my GF. IAM SOOO EXCITED !! Its really frustrating to have all these ideas and not make them come alive... Do all GF's have this option to do outline metal? I want to create my own designs, so I need a Glowforge that can cut a very thin metal sheet. Do you have any suggestions for me? Thank you!

[@TroytheMaker]

The glowforge is not powerful enough to cut metal.

[@absolutstencil7762]

Great how much is this laser

[@makenzieseger6465]

Where do you buy all your acrylic sheets every time I look on glowforges site they are sold out

[@TroytheMaker]

I buy locally from a plastic supply and online. Link to where I brought the mirror gold acrylic is in the description.

[@hassankariem5598]

Do you mind sharing where you get the beads for your jewelry from?

[@TroytheMaker]

My bad I thought i listed it in my description. gold ball spool amzn.to/3epnR84 gold ball connectors amzn.to/3jVB8GG

[@ziziphosobekwa1688]

hey, can this laser cutter work on a bras sheet or other metals? thanks

[@TroytheMaker]

I believe so if used with some metal marking spray. I haven't got around to testing it myself, but video coming soon.

[@toniaburress3582]

You’re doing a fantastic job on tutorials! It’s much appreciated. 🙂 Where do you buy your mirrored acrylic?

[@TroytheMaker]

I have came a long way, but room for improvement. Thanks for watching! www.inventables.com/technologies/gold-mirrored-acrylic-sheet

[@hassankariem5598]

@@TroytheMaker it’s like 2 bucks cheaper here because tax is included check it out cmsacrylics.com/collections/acrylic/products/mirror-acrylic?variant=36491629068454

[@jasiahaugustus1864]

sorry to be so off topic but does someone know of a trick to get back into an Instagram account?? I was stupid lost the password. I love any tricks you can offer me!

[@ramonjason2479]

@Jasiah Augustus Instablaster :)

[@jasiahaugustus1864]

@Ramon Jason i really appreciate your reply. I got to the site thru google and Im trying it out atm. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.

[@putogenio376]

Can it cut or engrave gold and silver?

[@TroytheMaker]

No it can't cut gold or silver. You can engrave on stainless steel using laser marking spray. Wait till 12/5/21 haha

[@putogenio376]

@@TroytheMaker what will happen in 12/5/22?

[@alexandreelisiario]

👍👍👍👍👍👍👍👍👍👍👍👍

[@TroytheMaker]

💪🏾💪🏾

[@socialjusticejewelry]

Elephant tutorial please.

[@TroytheMaker]

Between us I already made it. If we don't reach the 200 likes in 7 days I can send you a link via email to download.

[@lindascraftsandthings915]

@@TroytheMaker, would you be able to send me the link to download the elephant tutorial too, please?

[@chantaereynolds9312]

Did you upload the elephant tutorial? I don’t see it

[@qualitysnaps680]

Can this be used to cut QR code’s bro ?

[@TroytheMaker]

Yes and No. I have a video coming soon about it, but need to do some more testing.

[@qualitysnaps680]

@@TroytheMaker awesome will wait for it .Ta