Instagram: @Slowintegra www.burton-rac... (DISCOUNT CODE : SPTUNING) Merch and stickers on TheSptuning.com !
Пікірлер: 39
@hctim004 жыл бұрын
Downpipes looking good. Remember to rotate to different welds and allow the tubing to cool alittle bit.
@SPTuning4 жыл бұрын
Good tip! Thanks 💪💪
@Valleysyder4 жыл бұрын
Get a tig gas cup . Let it cool down and post flow . Your cooking the hell out the stainless,get a dual flow regulator , aluminum foil and backpurge.. I bet its sugaring on the inside . Prone to cracks ..
@vremm.motorsport2 жыл бұрын
Great job looks great! 👏 you may want to consider back purging not only does it make the welds look nice inside and out but it will also prevent your welds from caving in and blowing out while laying down your beads, and you won't have to pack in a larger amount of filler rod. In most cases you could even do it without filler as well. Great job thought keep it up
@ItsTheFry4 жыл бұрын
Almost 46k! #SENDITPAPI
@SPTuning4 жыл бұрын
🙏🙏💪
@shifty19274 жыл бұрын
cool channel i found you by typing in all motor awd honda. i ended up at your 11sec spray crx video. awesome stuff bro , you gained a sub
@upfactoryracing41484 жыл бұрын
You are getting the hang of it man! Practice makes perfect! Those billet control arms are pretty solid and chunky, quality!
@BulliKid4 жыл бұрын
nice to see you doing this. i want to buy a tig eventually and a band saw and start diy turbo projects on my channel too! keep up the good and honest work!
@ProjectLapse4 жыл бұрын
good tip when you are welding pie cuts, dont weld the last cut until the pipe is finished, it will warp to much to get a perfect fit.
@chapotheteg55444 жыл бұрын
The progress is looking great brotha, keep up the fire content, im excited to see how la fea turns out, even tho its not really fea no more, its a master piece💯 much love from New Mexico!!
@SPTuning4 жыл бұрын
🙏🙏🙏🙏🙏😍💪💪
@joserotary96364 жыл бұрын
That build is looking sick bro keep it up 💯👍👍👍
@FroManGarage3864 жыл бұрын
Yaaaaaaasssssssss! Keep it up papo 💪🏽💪🏽💪🏽
@SPTuning4 жыл бұрын
Thanks bro 🙏🙏❤️
@waymenlawrence20644 жыл бұрын
Are you using stainless steel on the up-pipe?
@captkools044 жыл бұрын
Welds aren't too bad for a novice welder. Hell, yours look better than mine so. Keep up the good work
@Terrycrackcorn4 жыл бұрын
Those control arms are killer man!
@tibi80652 жыл бұрын
Bro i apreciate your work, i`m a tig welder too. I can give you an advice for your weldings. If you want to make your welds looking good try to use at least nr 12 cup with gas lens and you will see a huge improvement. Good luck !!
@1989rrichardАй бұрын
Info on the welder please
@The_Redkween4 жыл бұрын
Under the manifold sounded dope.
@hasso27214 жыл бұрын
If you want your welds to be more Colorful and in general have better welds and better puddle controll, switch to a stubby gas lens kit and get your hands on a MFurick cup. It makes a very big difference compared to the Standard cups.
@ChasingPerfection4 жыл бұрын
Wear gloves and safety glasses when wire wheeling. Those wires will and do fly out as it wears out. They'll stick in your clothes, they'll stick in your eyes. A pair of leather gloves will save your hand from road rash when it catches and pulls your hand into the wheel.
@bblauter3 жыл бұрын
Same tools i have. ! Saw and tig
@gerardogoveche80644 жыл бұрын
Buen trabajo saludos desde oregon
@edygonzalez7809 Жыл бұрын
Tan muy duro el vídeo
@flcivic75454 жыл бұрын
What wastegate will you be using?
@DeathByNature234 жыл бұрын
I’d say grind the welds down and paint that pipe, or heat wrap it up.
@DeathByNature234 жыл бұрын
Or heat wrap it up
@The_Redkween4 жыл бұрын
Metigulous could help with tips too!
@fukdapolice5094 жыл бұрын
Badass
@SPTuning4 жыл бұрын
Thanks!
@THX..11382 жыл бұрын
Don't ever use the wire wheel with bare hands!...leather gloves and safety glasses are 100% mandatory. Even still you should hold the parts with pliers. If you hand gets pulled into the wheel it will burn through flesh pretty much instantly....I assume you were wearing safety glasses, but I'll mention it anyhow for you and anyone reading this. Those wheels often lose wires as you use them and the chances are 100% you will get a wire through your eye if you use the wheel without safety glasses.....TO BE CLEAR, I am am not speaking theoretically. I have seen first hand what happens when the wire wheel comes into contact with flesh, I have also seen people go to hospital with wires from the wheel in their eye.
@illestk24civic4 жыл бұрын
slowly step away from the welder
@slverbuet17914 жыл бұрын
PABLO THE UP PIPE IS LOOKING GOOD JUST TAKE YOUR TIME AND WELD SLOWER FOCUS ON NOT DIPPING AN DAB THE FILLER NICE AN EASY IT WILL DIME UP BETTER AND HONESTLY I THINK YOU SHOULD RUN THE EXHAUST UNDER THE AMAZING MANIFOLD AND BACK UP THREW THE ORIGINAL HOOD EXIT AND IT WILL LOOK SO INSANE AND HAVE BETTER FLOW ALSO YOU CAN BACK PURGE WITH YOUR SETUP JUST USE A LONG VACUUM HOSE AND STUFF TIN FOIL IN THE PIPE HOOK THE LINE TO YOUR TANK AND PUMP IT IN THE PIPE YOU GOT THIS JUST SEND IT PAPI
@SPTuning4 жыл бұрын
So many gems in this post 🙏🙏❤️❤️❤️❤️
@slverbuet17914 жыл бұрын
@@SPTuning ALL LOVE BROTHER YOU KNOW IT
@VtecEcky2 жыл бұрын
Why not backpurging 🥲 and your gas flow is bad out of your cup