How to Make Professional Lead-Acid Battery at Home (Step by Step)

[@DrugChovek]

I really appreciate your effort to not make fake videos as everyone else and actually educate people. I hope you succeed on youtube and in life!

[@joyofelectronics9782]

Thanks brother l am well aware of that making fake videos give nothing to people in terms of science and education.

[@modifyman6977]

I thought I understood dog?

[@en2oh]

It would be interesting to disassemble the charged battery to show how the positive plate looks after applying an electric charge.

[@LearnEnglishWithMe34]

I didn’t expect such a powerful battery as the result. This is a great video and very clever way. Thanks dude👍

[@joyofelectronics9782]

Thanks a lot fella

[@НиколайГегальчий]

The paper is eventually oxidized by sulfuric acid to charcoal.Coal is resistant.The coal will cause a short circuit.You will need a synthetic towel=Бумага в конечном итоге окисляется серной кислотой до древесного угля.Уголь обладает стойкостью.Уголь вызовет короткое замыкание.Вам понадобится синтетическое полотенце

[@bw-sci-fair]

Is there any place to purchase lead plates or is it best to deconstruct a battery for the plates? Thank you!

[@زینبحسینی-ق8ع]

Dostum bu en iyi klipti umarım başarılı olursun.

[@johnslugger]

Massive amperage!

[@joyofelectronics9782]

Yes. It’s so much powerful

[@PARTYzaNOVAC]

I made it. It holds the voltage at 2.1V and can output a short circuit current of 1.6A, which is great, however it has a capacity of only ~2.5mAh. I charged it with a constant current of 200mA for 3-4 hours. I tested the capacity by discharging it with a constant current of 86mA, it discharged in ~2min.

[@joyofelectronics9782]

When you first charge it. Charge with high voltage (6 volts) for a few hours with 1 amp or so. The capacity will increase brother if there is no other problem

[@MateenAhmad-e7k]

Wow amazing method keep on 🤩

[@emmabetances8418]

Hi! This video is amazing. How did you attach the lead connectors to the electrodes?

[@emmabetances8418]

Also, does the plastic container that you used have to be heat resistant?

[@joyofelectronics9782]

Just solder it. Soldering material is mostly made of lead. So it’s a perfect way to connect them.

[@emmabetances8418]

@@joyofelectronics9782 Thank you so much! Also, what kind of plastic container did you use and where did you get it?

[@joyofelectronics9782]

@@emmabetances8418 it’s a cosmetic container of some kind.

[@WTF_BBQ]

Oh man, you should have made an ultra battery instead. I've always wanted to build one, but i don't like messing with lead.

[@joyofelectronics9782]

I will do, but there is lead in ultra battery too☺️

[@nnejiamaechi9385]

How can 2.12v battery lite a 12v battery,?

[@nnejiamaechi9385]

Sorry 12v bulb?

[@WTF_BBQ]

@@nnejiamaechi9385 That's because it's an incandescent light bulb. The filament heat up and glow when there's sufficient current passing through it. Lead acid batteries can supply a good amount of current even at 2 volts, but obviously not enough to make the light bulb very bright.

[@s.h7124]

I wish you measured the amp draw

[@tossancuyota7848]

looks more like supercapacitor than a battery but its indeed interesting to see how much current it has

[@joyofelectronics9782]

No no, it is a lead acid battery. If you watch the whole video you will understand. Its current is pretty high (approximately 4 amp)

[@tossancuyota7848]

@@joyofelectronics9782 i watched the whole video including the ads, the reason i said the its more like super capacitor is cause of the current

[@realflow100]

@@joyofelectronics9782 Definitely more than 4 amps. To melt wires like that that quickly requires 20-50 amps from my experience.

[@Drbarisseren]

ya hoca cidde hiç elektrik malzemesi olmadan elektrikle uğreşman, parke üzerinde video çekmen cidden çok iyi. vala videoların müdavimi oldum ama danışmak için bi iletişim numaran yok mu?. balıkesir de eti madenenin kurum doktoruyum. bir çok malzemeye erişimim var bor la bile deney yapabiliriz ama cidden tebrik etmek istedim =)

[@joyofelectronics9782]

Sağol var ol hocam. Yorumu görünce çok şaşırdım ve tebessüm ettim. Çünkü bende bu sene Balıkesir’e geldim😊 numaramı yazdım ama görmedin sanırım kardeşim. Numaranı paylaşırsan mutlaka dönüş yaparım.

[@arnoekarts7114]

Yes But We have....some problems... Tx.and GoodLuck.

[@nimaljayathilaka4718]

Good instruction. Cheers❤

[@the_turbulence_]

Great video ❤ what is the capacity?

[@joyofelectronics9782]

About 2000 mAh

[@valdomirosilva4127]

Congratulations! Great video

[@joyofelectronics9782]

Thanks

[@SiriusFuenmayor]

how can you restore a gel lead acid battery?

[@kerembolukbas7435]

Eline sağlık bilgilendirmelerin için. Bu arada sen Türk müsün?

[@joyofelectronics9782]

Evet kardeşim

[@kerembolukbas7435]

@@joyofelectronics9782 maşallah ingilizcen de güzel abi çalımalarının devamını dilerim...

[@raducumilea-is2yi]

The electrolit doesn't disolve the tissue paper?

[@joyofelectronics9782]

No brother it will work. I still use that battery. Maybe you have seen in my some videos ☺️

[@hayriyeolze3986]

I like it

[@joyofelectronics9782]

Thanks 👍

[@rdsingh6953]

Can epsom salt used as electrolyte if sulfuric acid not available?

[@joyofelectronics9782]

No

[@sucilaksono2150]

How many ah in this capacity does it has the same capacity of used plate? What about cycle life ? Have you tested how many times it will last

[@joyofelectronics9782]

It’s 2000 mhA. Life cycle is very long maybe five years or more. I still use that battery. Maybe you have seen this battery in my some videos.

[@sucilaksono2150]

@@joyofelectronics9782 ok your salvage battery was 6ah, using this method you get 2000mah so we will get 33% of capacity from negative plate is that correct?

[@joyofelectronics9782]

@@sucilaksono2150no in may batter l just used four pieces of electrodes (total) but in the salvage battery 9 pieces were used. It means that the capacity of my battery has almost 70% of original one which is pretty cool.

[@modifyman6977]

uhh... You may want to neutralize that acid you dripped on your surface @10:30. Also. how about a video with the topic, "How to Make Leads for a Testing Device." That would help you and many others. Last Comment. I promise...Make your positive connection terminal smaller for distinguishing between the two....and

[@modifyman6977]

This a cell...not a battery!

[@ourchannel8215]

you are amazing man...👍👍👍

[@joyofelectronics9782]

Thanks brother

[@ghomarbaz_city]

the metal of both electrod is same? pb? is possible?

[@joyofelectronics9782]

Probably you skipped that part of the video. As l told the positively charged electrode turns into lead dioxide over time while charging.

[@ghomarbaz_city]

😘@@joyofelectronics9782

[@ghomarbaz_city]

😘@@joyofelectronics9782

[@harshivpatel6238]

What material is used for separator here ?

[@joyofelectronics9782]

Paper towel

[@mohammadzare9927]

Chok guzal yapdin. Ve chok guzal english chalisbur sin.(danishur sin)❤

[@muratmestoglu7022]

Merhaba Türkiye de yaşıyorsunuz rica etsem Türkçe bir video çekermisiniz konuyla alakalı

[@ameristanbouli5063]

The problem here is that its not a lead , it a lead sulfate because its very old and deeply discharged battery, so when you charge it up you release the sulfate atoms to the electrolyte and thus increase the constration of the electrolyte

[@nnejiamaechi9385]

What is the Ampere? I asked cos for it to carry all the tests you did and still remain upti 2.2v its necessary to know what was the amp? Can it be produced in 6pcs in order to get 12v or can each get upto 3vs or more?

[@joyofelectronics9782]

The max amp is 5 volts. Yes you can combine six of them to get 12 volts

[@nnejiamaechi9385]

@@joyofelectronics9782 ok pls what the ampere cos it's very powerful

[@modifyman6977]

Each lead acid cell produces a little over 2 volts. This here is not a battery. It's a cell. Multiple cells make a battery.

[@ahmetustun8779]

😀

[@wwabete2009]

How does your battery work using the same Lead material for both anode and cathode. A Lead acid battery would require a Lead Dioxide Cathode! I thought you were going to coat the negative electrode with a coating made from the waste positive electrode to make it positive?!

[@joyofelectronics9782]

I’ve already explained in the video but probably you skipped that part. I’m gonna tell again. When you charge the battery for the first time the sponge lead on the the positively charged electrode turned into lead dioxide. After charge and discharge for many many times it will completely turn into lead dioxide. I hope this helped 👍

[@wwabete2009]

@@joyofelectronics9782 Thanks a lot. I missed the important part! Amazing work gives me new ideas on reviving dead batteries. Thanks again

[@joyofelectronics9782]

@@wwabete2009 you’re very welcome.

[@wwabete2009]

@@joyofelectronics9782Just made one following your advice and the results are crazy! That’s pure genius of recycling lead acid batteries! Wow! I am discharging it at 0.2A and it’s like it will be discharging « forever » I am already at 77mAh and 76mWh and it’s still going! Thanks brother scientist for sharing « real stuff »

[@joyofelectronics9782]

@@wwabete2009it’s really very nice to hear that. I became very happy. There is no fake videos on my channel. I always try to inspire people. Thanks for your nice comment and sharing the result🙏

[@muratmestoglu7022]

(Negatif- Plakalar) (Pozitif+plakalar arasında yapı farkı var mı?)(Kursun-Oksit)(kurşun sülfat)( Kafam ambalaj oldu net bir bilgiye ulaşamıyorum yardımcı olurmusunuz

[@joyofelectronics9782]

Merhaba kardeşim Türkçe video çekmem zor ama kafanızın takıldığı noktayı anladım. Burdan yardımcı olayım. Eksi ve artı plakalardaki malzemeler normalde farklıdır. Artı plakada kurşun dioksit eksi plaka da saf kurşun kullanılır. Bu videoda biz sadece eksi plakaları kullandık dikkat ederseniz. Ama ilk şarjda artı kutup bağladığımız plaka bir süre sonra (1 amperlik akımla 20 saat sonra filan) kurşun dioksite dönüşür oksitlenme süreci denir buna. Yani iki negatif plakayı şarja takınca bir süre sonra bir tanesi artı plaka haline dönüşür ve pil çalışır. Sanırım sormak istediniz buydu. Sevgiler kardeşim.

[@muratmestoglu7022]

@@joyofelectronics9782 ❤TEŞEKKÜRLER Kardeşim öğrenmeye eğilimli bir yapım var sayenizde öğrenicem. Murat Mestoğlu Teşekkür eder

[@joyofelectronics9782]

@@muratmestoglu7022 yalnız bir uyarım olacak. Kurşun çok zehirli bir malzemedir çalışırken mutlaka eldiven kullan. Sülfürik asite de dikkat et lütfen zarar görme.

[@muratmestoglu7022]

@@joyofelectronics9782 Kimyasallar konusunda yeterince tecrübeliyim düşüncen için teşekkürler

[@hdtjjfdyj2110]

how to make all - + plate 😢

[@joyofelectronics9782]

I’ve already told in the video. Probably you skipped that part. Let me tell you again☺️when you charge the battery. The positively charged electrode turn in to lead dioxide over time so works as positive electrode.

[@alexandrudiculescu6996]

The battery isn't "professional" is actually quite weak. Why? Check ohm's law. 2.12v with a resistance (the copper wire he used)mostly equivalent with 0 will draw lots of amps, for a very short time, and it won't last if used as a voltage source due to the lack of capacity...

[@joyofelectronics9782]

Brother first of all thanks for your comment and sharing time. But you are a prejudiced because l calculate its capacity. (After positively charged electrode completely turn in to lead dioxide) the capacity is 2000 maH which is almost same with a new brand lead acid battery with the same size. If try making one at home you will amazingly confirm me. Thanks

[@alexandrudiculescu6996]

@@joyofelectronics9782 yes, 2000mah, which is 2ah, which is weak 😆

[@wwabete2009]

@@alexandrudiculescu6996That is just one basic cell! He can connect as much as wants in parallel and he will obtain any Ah he wants at 2V! So it’s quite a good performance

[@alexandrudiculescu6996]

@@wwabete2009 I know that you can get any voltage and Ah by connecting them in parallel and series, but it's only about the description video and the "delivered product".

[@wwabete2009]

@@alexandrudiculescu6996 ok got you! You are right. Compared with what others present on the internet, it’s the best so far especially considering that this is recycling this dangerous lead rather than letting it out in nature. It is always good in life to encourage the little effort people make. What might appear to you and me as unprofessional could be the best this guy can offer today. He may offer us something amazing tomorrow ! He is just an enthusiastic experimenter who has a burning desire to share!!

[@angelr6772]

Promo*SM 💥

[@Sarbjeet_Saini]

use copper plate for positive

[@joyofelectronics9782]

Copper foil is not compatible with sulphuric acid