How To Make RC Trainer Airplane. DIY Model Airplane For Beginners

  Рет қаралды 5,114,578

KendinYap

KendinYap

4 жыл бұрын

Making RC trainer model airplane for beginners. Brushless motor, Four channels.
Necessary Materials:
* 2212 980 or 1400KV Brushless Motor: s.click.aliexpress.com/e/_Dlo...
* 8x6 propellers: s.click.aliexpress.com/e/_DCO... OR
www.banggood.com/custlink/v3m...
* 30A Brushless ESC : s.click.aliexpress.com/e/_DED...
* 1 x LiPo Battery 11.1V 1000 mAh: s.click.aliexpress.com/e/_DEn...
OR 11.1V 1300 mAh: s.click.aliexpress.com/e/_Dd8... OR
www.banggood.com/custlink/KD3...
* (2pcs) 40mm wheel: s.click.aliexpress.com/e/_DBK...
* 4 pieces horns: s.click.aliexpress.com/e/_DDC...
* 4 or 6 channel radio control system: s.click.aliexpress.com/e/_Dkv... OR
s.click.aliexpress.com/e/_Ddu... OR s.click.aliexpress.com/e/_DCP...
* 4 micro servos (may be 9gr servos): s.click.aliexpress.com/e/_Dm9... OR
www.banggood.com/custlink/DvK...
* Gold Connectors 3.5mm: s.click.aliexpress.com/e/_Dmx...
* Wheel stopper: s.click.aliexpress.com/e/_DCc...
* Y extension cable: s.click.aliexpress.com/e/_Deg...
* Adjustable Linkage stopper (Easy Link): s.click.aliexpress.com/e/_Dkv...
* Pushrods & landing gear rod: s.click.aliexpress.com/e/_DEN...
* L type nylon clevis keper clip: s.click.aliexpress.com/e/_Dku...
* Canopy Hatch Lock : s.click.aliexpress.com/e/_DE3...
* Fiber Strips Adhesive Tape : s.click.aliexpress.com/e/_DlM...
* Fastener strip : s.click.aliexpress.com/e/_DnN...
* Brass Tube: s.click.aliexpress.com/e/_Ddx...
* Plastic Tube (2x3): s.click.aliexpress.com/e/_Dmt...
* Optionel steering arm: s.click.aliexpress.com/e/_DdD...
* M3x16 screw for steering
Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw...
Hot melt Glue Gun: s.click.aliexpress.com/e/_DkC... OR
s.click.aliexpress.com/e/_DnD... OR s.click.aliexpress.com/e/_Dl2...
Screw Locking: s.click.aliexpress.com/e/_DEp...
Onboard Camera:
RUN CAM II 1440P: s.click.aliexpress.com/e/_DkH...
RUN CAM II 4K: s.click.aliexpress.com/e/_DFv...
Thanks for watching. If you want to support my channel, join.
/ @kendin-yap
Some of the shops that sell Kraft Foam Board:
www.amazon.in/Pacon-Water-Res...
pacon.com/board-480/water-res...
tinyurl.com/4ups272k
www.foamboard.shop/en/foamboa...
www.enasco.com/p/Pacon-Water-...
www.mwmaterialsworld.com/es/p...
Technicial Specifications:
Lenght: 640 mm
Wing span: 810 mm
Flight weight: About 495 gr
Center of gravity: 4.6-5.2cm from the front of the wing
Required control system: Min. 4 channels, 4 micro servos
Suitable battery: 11.1V 1000Mah - 1300Mah Lipo battery
Suitable motor: 2212 Brushless Motor (980-1400KV)
Suitable propeller: 2 Blade 8x6 (8060)
DIAGRAMS and DETAILS: cutt.ly/R88mHJ7
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.

Пікірлер: 3 700
@ChickenPotato.Chitato
@ChickenPotato.Chitato 3 жыл бұрын
My dad recently told me that he missed his old collection of model airplanes so I’ve started trying to make him a few! Thanks for the tutorial! I’ll be watching this a lot lol
@CardZed
@CardZed 3 жыл бұрын
You seem like a very good son/daughter. Good job!
@Onealcasamis1996
@Onealcasamis1996 3 жыл бұрын
snail
@ChickenPotato.Chitato
@ChickenPotato.Chitato 3 жыл бұрын
@@Onealcasamis1996 snail
@depenetrator310
@depenetrator310 3 жыл бұрын
@Aron Zakai nice try
@briannajames4274
@briannajames4274 3 жыл бұрын
Hello
@michamachlanski7095
@michamachlanski7095 3 жыл бұрын
I built it and it flies amazing, thanks
@salmankhan-ek2dj
@salmankhan-ek2dj 3 жыл бұрын
Plz tell me where you get the materials and list of materials required for this plane only
@hassanulhadi1335
@hassanulhadi1335 3 жыл бұрын
@@salmankhan-ek2dj from the description
@kerimakdeniz9165
@kerimakdeniz9165 3 жыл бұрын
How much does it cost ??
@kerimakdeniz9165
@kerimakdeniz9165 3 жыл бұрын
@abdul bari ok thanks
@Kula88443
@Kula88443 3 жыл бұрын
Where do you get the receiver and levelators
@user-lh4je7yg7m
@user-lh4je7yg7m 2 ай бұрын
One of the first planes I built when getting into the hobby of scratch buiilding. It's truly a great trainer for building and learning to fly. Thanks for helping us out.
@dalemckenzie9394
@dalemckenzie9394 2 жыл бұрын
This video rekindled a long lost fascination for flying model planes , at 68 I will begin again and who knows maybe some of my grand kids will come on board. Thankyou so much.
@jacksampson7711
@jacksampson7711 3 жыл бұрын
Wow!!! This is a great build. Seems very simple and straight forward. Plane looks great. Love the landing gear.
@Nothsa-mt4yo
@Nothsa-mt4yo 2 жыл бұрын
You are actually a legend, this is one of the best DIY videos I've seen in general. Very thankful for providing diagrams and the parts list in the description!
@sean7058
@sean7058 2 жыл бұрын
This is as good as flight test i like the measurements highlight in the video thats great
@someone.-_497
@someone.-_497 2 жыл бұрын
What's your age
@alexanderange
@alexanderange Жыл бұрын
@@someone.-_497 your mom
@peruccaeditz
@peruccaeditz Жыл бұрын
@@someone.-_497 Why asking?how does it relate with the subject matter?🤡
@keshabchowdhury8243
@keshabchowdhury8243 Жыл бұрын
Ke ke metarias lagbe. Amio try korbo
@sunitagupta8601
@sunitagupta8601 2 жыл бұрын
This is the only RC plane guide that is complete My RC plane could not have been possible without this thank you a lot for making this.🙏😃
@user-py5jy5qe2w
@user-py5jy5qe2w 8 ай бұрын
Чем проще тем генеральный! Отличное пособие для начинающих авиаторов! Однозначно лайк
@mehdisy3d
@mehdisy3d 3 жыл бұрын
Who the heck would want to downvote this?!! Incredible job building and flying this and thank you so much for sharing!
@johnmichaelvoss6194
@johnmichaelvoss6194 3 жыл бұрын
Very nice. Amazing how inexpensive it is in both material and workmanship, yet it flies flawlessly
@LazorsGD
@LazorsGD 3 жыл бұрын
it's quite expensive
@muhammadyakubu1919
@muhammadyakubu1919 3 жыл бұрын
Quiet expensive bruv. RC plane hobby is an expensive hobby
@ludwigsnihonto8757
@ludwigsnihonto8757 3 жыл бұрын
Yeah currently building it it’s like 70 hours 200$ in
@ludwigsnihonto8757
@ludwigsnihonto8757 3 жыл бұрын
But lots of fun
@briannajames4274
@briannajames4274 3 жыл бұрын
Hello how you doing?
@raggedrascal5463
@raggedrascal5463 2 жыл бұрын
This is amazing. You are a genius. I've been considering building an RC plane for some time and this has given me the inspiration to make a start.
@andymunnings9109
@andymunnings9109 Жыл бұрын
"Before I say anything, I want you to know? I Greatly appreciate you. Would you believe? This was exactly how I was one time ago. I always use to take my time and construct model airplanes from foam board and fly them when they are completed. We share the same interest. I love how you measured the center of gravity in relation to the battery's pitch for easy control and stabilization of the aircraft. Your project was a good flyer. It is good enough to market and sell at a profitable rate due to the electric easy start system. I would like to be friends with you, we share common goals. You are a great builder. It was simple, but? It was done properly; That was the achievement due to success." Good, Job! I appreciate you. 👍
@dlboarman
@dlboarman 3 жыл бұрын
Wow, super job showing how to do this and particularly providing a complete list of where to find everything!
@Ephraim610
@Ephraim610 2 жыл бұрын
I have a question how does he get the servo working without a receiver do you need a receiver for servos to work?Thanks in advance.
@Ephraim610
@Ephraim610 2 жыл бұрын
Oh nvm
@Saiteja-bg9gj
@Saiteja-bg9gj 2 жыл бұрын
@@Ephraim610 see the video he connected the servo to the receiver
@michaelhickam7774
@michaelhickam7774 4 жыл бұрын
Wow! Great trainer/ intermediate aircraft and build vid! FPV is just icing on the cake
@Doomguynowaying
@Doomguynowaying 10 ай бұрын
My brother and me now have 2 planes😊 thankyou for this great tutorial and the technics used are very nice❤ we cant wait to fly them
@Science-bp5pg
@Science-bp5pg 2 жыл бұрын
Best landing I've seen in an homemade rc
@ralphfrasier2079
@ralphfrasier2079 3 жыл бұрын
Nice project for dad and the kids! BTW Great looking flying field! Thank you for sharing................
@fiapo3104
@fiapo3104 3 жыл бұрын
Muito da hora o aviãozinho, parabéns 👏👏👏👏
@deldridg
@deldridg 2 жыл бұрын
This is awesome and *thank you* from Sydney. My son and I are about to build a 150% model of this and have all the components ready. We'll be attempting to build it from corflute (or coroplast as it's called elsewhere). Slightly heavier material but we'll give it a crack anyway. Cheers and thanks - Dave and young Will
@fatihbural7845
@fatihbural7845 2 жыл бұрын
Have you started it yet? If yes what's the current situation? Greetings from Turkey.
@deldridg
@deldridg 2 жыл бұрын
@@fatihbural7845 Hi Fatih - thank you for your interest! Yes, we did make it but our maiden flight was not so successful due to high winds. Since then we haven't yet flown it properly but will try to do so when we get a chance. My experience tells me that it should fly pretty well (on a calm day). Here is a video my son and I made of the build: kzbin.info/www/bejne/lZnNfGhqbsqopdU Cheers from Sydney, Dave :-)
@maxabeywickrema8975
@maxabeywickrema8975 2 жыл бұрын
What about the receiver? What did you use?
@fatihbural7845
@fatihbural7845 2 жыл бұрын
@@deldridg well congrats for making and having this experience! I have checked the link and also subscribed to the channel. Great work!
@sedatergezer4837
@sedatergezer4837 2 жыл бұрын
Congrats. I think your design was %150 bigger than @kendinyap. I just wonder that what did you use motor, propeller, esc and battery combination. Also, can you say that bigger is better for this plane for training stage. Thanks and hello from Turkey. Last one, could you please share detailed dimensions of your design and plans if it is possible. Thanks in advance.
@argonaut6386
@argonaut6386 3 ай бұрын
Fantastic clear video. I used to fly glow fuel planes as a youngster and would love to have a go again. This looks ideal but it does look a bit fast for my reactions learning again 👍
@bobbymalta73
@bobbymalta73 4 жыл бұрын
Cheers mate Thanks for sharing May God Bless You!
@oisinbessko6890
@oisinbessko6890 3 жыл бұрын
Brings me back to my first build. Thanks for posting.
@AavegSheth
@AavegSheth 2 жыл бұрын
This is one of the best DIY airplane I have seen
@jhonnatanbatista6973
@jhonnatanbatista6973 2 жыл бұрын
Thanks a lot. I've made one for my son and it flyes very nice. Congrats!!!
@jojoseph22
@jojoseph22 3 жыл бұрын
Love your RC planes builds ❤️❤️ a lot!! And I'm trying to make one 😁
@epiaduk5234
@epiaduk5234 3 жыл бұрын
0
@epiaduk5234
@epiaduk5234 3 жыл бұрын
00
@ahmadnawaz7006
@ahmadnawaz7006 2 жыл бұрын
Lbbj
@mjc7771
@mjc7771 4 жыл бұрын
So excited to try this myself :) thanks for sharing your wisdom and craft
@ManuelPetrosi-es7rk
@ManuelPetrosi-es7rk Ай бұрын
i am planning to built this rc airplane this video is very help thank you !! grazie dall'italia
@KJIaBogaB
@KJIaBogaB 11 ай бұрын
perfect!!! thank you from Russia!!!
@ammar_arain
@ammar_arain 3 жыл бұрын
Thanks for helping me make my first RC plane that works! My first plane was a delta wing, didn't work because the wings were too small, then I tried your design but made it 1.3x bigger and tested it twice, it flew both times but I only flew it for 5 seconds the first time and 10 seconds the second time since I never flown an RC plane before. Thanks again for this amazing video!!!
@randomcat201
@randomcat201 Жыл бұрын
How much did itvtake
@ammar_arain
@ammar_arain Жыл бұрын
@@randomcat201 The transmitter and receiver were around $75, motor was $15, foam was $3, pack of 4 servos were $5. So a little over $100.
@randomcat201
@randomcat201 Жыл бұрын
@@ammar_arain damn
@pescetv8371
@pescetv8371 Жыл бұрын
@@ammar_arain yo, are all the parts in the description or are there extra parts? How many wheel stoppers did you need?
@ammar_arain
@ammar_arain Жыл бұрын
@@pescetv8371 All the parts seem to be in the description. I didn't use any wheel stoppers because I didn't have any available so I just cut out a piece of foam and stuck it to the end of the rod (a pretty bad way to actually do it). But 3 wheel stoppers should be enough for this design.
@chaltonmumo2654
@chaltonmumo2654 3 жыл бұрын
I feel satisfied! No gimmicks no jokes.. it worked! Definitely subbing!
@junaidalam190
@junaidalam190 2 жыл бұрын
One of the great video with full information 👏👏
@mickerdoodle51
@mickerdoodle51 2 жыл бұрын
I love this. I hope to build with my grand son.
@electronic7979
@electronic7979 4 жыл бұрын
Mükemmel olmuş. Elinize ve emeğinize sağlık
@shinej11
@shinej11 3 жыл бұрын
Wow! I love it. You're quite a good pilot too. Thank you for sharing 😇😇
@user-qt8mk5oo5y
@user-qt8mk5oo5y 8 ай бұрын
Looks great I like the way you did it building one now.
@muhammadharunyole1539
@muhammadharunyole1539 2 жыл бұрын
Unlimited motivation..✊ Thanks man 🙏
@oguricap738
@oguricap738 4 жыл бұрын
Your skill is very resonnable and wonderful! I will mimic your model plane. You did a good job!
@tonyross1181
@tonyross1181 4 жыл бұрын
Amazing build - Thank you for sharing it with us.
@rustygaming5147
@rustygaming5147 4 ай бұрын
Thats a hell lot of precision and perfection right there . Good job buddy 👏
@user-su6wg5yh9u
@user-su6wg5yh9u 18 күн бұрын
your an amazing pilot and a creator I am 13 and am going to buy all the materials and make this plane myself wish me luck and I love ur channel keep makin videos
@aeromodelisme45
@aeromodelisme45 3 жыл бұрын
Très bien comme vidéo, bravo pour cette présentation et réalisation !
@glandt
@glandt 3 жыл бұрын
Started flying again after 15 years away and was shocked that there aren't any affordable (glow) trainers available. I came across your video and thought "what do I have to lose?" I doubled the specs and put on a .28 glow engine and the thing flew great! I'm now building a 250% version (80" wingspan) for .40-.60 size glow. Thank you, much easier on my old heart crashing a $10 plane than a $300 one...
@therApist69
@therApist69 2 жыл бұрын
I'm new to this so can someone explain what glow is...
@tariqsingh3747
@tariqsingh3747 2 жыл бұрын
@@therApist69 similar to a gas engine
@Atakula383
@Atakula383 2 жыл бұрын
@@therApist69 nitro engines
@Vallabhkarnekar_8000
@Vallabhkarnekar_8000 6 ай бұрын
Thanks it is awesome it was flying like a real aeroplane 🎉🎉
@vaibhavjain2791
@vaibhavjain2791 2 жыл бұрын
Very good diy demonstration and flying. Superb!
@user-eo9lu4ur5g
@user-eo9lu4ur5g 3 жыл бұрын
ชอบช่องนี้มาก สอนละเอียดดี ดีกว่าบางช่อง ห่วงวิชา
@sandroeduardo258
@sandroeduardo258 4 жыл бұрын
Excelente muito bom mesmo, estou tentando aprender, mas até agora já quebrei vários vou construir este aí pra ver se consigo voar ... Obrigado pelos tutoriais . Você está de parabéns, ótimos vídeos.
@ponteirodorato
@ponteirodorato 4 жыл бұрын
Qual material ele usou? Tipo, papelão? Isopor?
@777vander777
@777vander777 4 жыл бұрын
@@ponteirodorato ele usa um tipo de "papel" chamado foam board. se tu tiver no brasil tbm chamam de papel-pluma... na kalunga tem so que eu nao achei com a laminação de papel kraft marrom
@robertospinelli9459
@robertospinelli9459 3 жыл бұрын
Esse papel - pluma revestido com craft não se encontra em lugar algum aqui! Vou é procurar um papelão de alta densidade.
@jaffry5663
@jaffry5663 2 жыл бұрын
@cursor Esse material se chama foam, no Brasil é bem difícil de se achar ou muito caro, no mercado livre vende. O foam nada mais é do que uma placa de XPS(mesmo material das bandejinhas de carne de supermercado) porém, com uma lâmina de papel nos dois lados. Na realidade do Brasil é mais fácil fazer com essas placas de xps, que em alguns lugares é chamado de depron tambem, mesma coisa
@jgreco
@jgreco 2 жыл бұрын
So far, I have built two models based on your designs. They are amazing!
@gammersunity4117
@gammersunity4117 2 жыл бұрын
@Richard 150$ maybe
@MrCaiokem1000
@MrCaiokem1000 2 жыл бұрын
Very good you are good pilot i liked it congratulations!
@see_it_through_my_eye
@see_it_through_my_eye 3 жыл бұрын
Omg! Your skill is next level and you say this is for beginners 😅 Very gracefully done airplane buddy!
@rodrigonagrampa
@rodrigonagrampa 3 жыл бұрын
Hahaha I think for skillful beginners....like me I am new to flying rc planes actually I do have a 2 channel beginner plane and with 3 or 4 times I have flown my plane....and saw this video....I am interested in building my own plane and this is a very good tutorial and very informative approach for creating a diy plane....I want to try creating a 3 channel not much advance like the owner of the video. But indeed he's very skillful and a genius!
@ALPHA_-
@ALPHA_- 3 жыл бұрын
@@rodrigonagrampa i would reccomend getting a rtf one first, like the sport cub s or 500. They have 3 modes and pre-built gyros and are easy to fly
@Joyplanes
@Joyplanes 4 жыл бұрын
Great job!
@ahmadmersarani3767
@ahmadmersarani3767 3 жыл бұрын
You are a master of RC trainer aircraft...nice, thanks..👍👍✌️✌️😂☑️
@MasboyRC
@MasboyRC 4 жыл бұрын
Awesome !! It's so stable and flying perfectly. I really love your video footage on maiden flight, it's so beautiful sight of landscape.
@freddykoopmans6985
@freddykoopmans6985 4 жыл бұрын
WTF, I did see the plane only fly at a high speed, andthat was to fast and too small for teaching any new RC pilots.
@martincarne1771
@martincarne1771 3 жыл бұрын
Thanks for your incredible job!! You are a master!! Congratulations!! Excellent video too!!
@warleylopesdesouza907
@warleylopesdesouza907 2 жыл бұрын
Parabéns muito bom
@samwan8573
@samwan8573 8 ай бұрын
Your creation and video are amazing.
@georgewere100
@georgewere100 4 жыл бұрын
Man when the camera captured the wheel in take off and landing.. that was soo satisfying. Am going to try this out.
@lightbulb6802
@lightbulb6802 3 жыл бұрын
Great job! I love your video! Now it is much easier for me to understand how to make a rc airplane!! Great Job!!!
@samrpitindianclassicalmusi2783
@samrpitindianclassicalmusi2783 3 жыл бұрын
Ha par electronic saman khaha se milta hai please tell
@premlatapandey2532
@premlatapandey2532 3 жыл бұрын
@@samrpitindianclassicalmusi2783 amazon
@marsshamim
@marsshamim 17 сағат бұрын
The plane is very nice
@randywetzler5976
@randywetzler5976 2 жыл бұрын
Thanks for sharing your skills and expertise, you make it look easy! I'm in the process of trying this build and struggling a bit with making the wing. I couldn't readily source the Kraft type foam board. How important is the type foam board? I sourced some foam board, Elmer's brand 20 X 30 inches from our local Wal-Mart, $1.77ea. It seems to be of fair quality but doesn't seem to want to make the sharp bend around the spar as easily as shown in the video. In the video it looks like your just scoring through the paper on the 1cm spaced lines, is this correct? Maybe it just takes more practice to get the hang of it. Mine seems to break open as I'm flexing it around the nose of the spars, probably my cuts are to deep.
@Kendin-Yap
@Kendin-Yap 2 жыл бұрын
Kraft foam board is different from insulation foams. The outer surfaces is covered with paper (kraft type paper). In this way, it is more robust. And it is more suitable for bending operations. Insulation foams do not allow large angle bends. In this case, you can cut the lower and upper surfaces of the wing as two separate pieces. And then you can paste it to create the wing form.
@assassings3030
@assassings3030 2 жыл бұрын
@@Kendin-Yap Please make a video on DELTA WING as well, I made it but it didn't flew, I damaged one of my Wooden Props as well, So plzz make a video!
@saigonvangbong4952
@saigonvangbong4952 2 жыл бұрын
@@Kendin-Yap phane
@nirmaln5684
@nirmaln5684 3 жыл бұрын
I was looking for something like this . Video with measurements . Thank you from Kerala , India .
@patrickprakash8
@patrickprakash8 3 жыл бұрын
Malayali da
@Visalvyasan
@Visalvyasan 3 жыл бұрын
chumma poli
@joyalpjoy8830
@joyalpjoy8830 3 жыл бұрын
Pinnale
@ViShNu_K3
@ViShNu_K3 3 жыл бұрын
Mallu pewer
@politecat3299
@politecat3299 3 жыл бұрын
Dhe malayalee
@easy_3d
@easy_3d 4 жыл бұрын
Loved the video..thank you so much for making this video..it was really helpful
@biganguria
@biganguria 2 жыл бұрын
I'm waiting for the 2nd propeller to 3D print.. and waching this dude got me so many ideas!! Thanks
@locostse7en
@locostse7en 2 жыл бұрын
Good job well done. I want to make one now x
@ushamannam8961
@ushamannam8961 3 жыл бұрын
Not only is this a very good video, it might as well be the most affective asmr vid lol
@laurencesun_
@laurencesun_ 3 жыл бұрын
This comment is what I was expecting
@tratymorg
@tratymorg 3 жыл бұрын
Pretty good, I enjoyed watching and thanks for sharing
@echolee1197
@echolee1197 2 жыл бұрын
Saya senang kamu mau memberikan pola beserta ukurannya.jadi orang lain bisa belajar dan pintar membuat pesawat mainan untuk anak"nya AWESOME GOD JOB 👍👍👍
@GamingWorld-my6su
@GamingWorld-my6su 2 жыл бұрын
You have a runway😃great👌👍
@kostiakostiuk1677
@kostiakostiuk1677 4 жыл бұрын
Hello! I am from Ukraine, you are TOP!
@wheatboy2468
@wheatboy2468 4 жыл бұрын
great man i never saw such detailed video
@knownanhhis_gaming5871
@knownanhhis_gaming5871 2 жыл бұрын
Im acutaly a kid and i wana be a engineer when i grow up so im starting at grade six and this might help me learn alot about engineering sice i watch alot of engineering and all the basics ty
@user-ck4zq6qk2b
@user-ck4zq6qk2b 2 жыл бұрын
im actually a kid too and from korea
@JesseDunham
@JesseDunham 2 ай бұрын
I loved how I could draw my own templates on my foam board.If I tried to print them my plane would be so bad😂.Please do another one like this.
@MCsCreations
@MCsCreations 4 жыл бұрын
Beautiful work, my friend! Really nicely done! 😃 Sorry for the absence, I haven't had enough time lately. 😕 Stay safe there with your family! 🖖😊
@thesocialistmind9880
@thesocialistmind9880 3 жыл бұрын
Finally a plane which doesn't need 3d printing, cheap and top-notch quality. Greetings on behalf of India!
@bekodevs1793
@bekodevs1793 3 жыл бұрын
You can buy a cheap 3D printer He is so useful
@matix4668
@matix4668 3 жыл бұрын
@@bekodevs1793 *it
@user-tf6uh1cu9p
@user-tf6uh1cu9p 9 ай бұрын
Very thankful, Please keep it up. ❤❤
@beachabcd
@beachabcd Жыл бұрын
I bought exactly that type of plane 40 years ago. I built that using all the compartments in your video (these compartments were already cut). TY for reminding...!!!!
@Tx_6969
@Tx_6969 4 жыл бұрын
I can hear bass in the music. EPIC !
@musti8734
@musti8734 4 жыл бұрын
Çok iyi bir içerik! Heyecanla takip ediyorum. :D
@furqanjalil3143
@furqanjalil3143 2 жыл бұрын
Rayan air should hire this guy
@peachpuff2438
@peachpuff2438 Жыл бұрын
turkce ceviri koymaniz gercekten cok yardimci oldu cok tesekkurler kesinlikle abone oluyorum cok temiz is cikarmissiniz gercekten
@youngcuzzoproductions
@youngcuzzoproductions 3 жыл бұрын
DUDE THANK U SO MUCH UR AWSOME
@gokulkrish6703
@gokulkrish6703 3 жыл бұрын
I never imagined that creating an airplane would be this much easier.
@keithfreeman5204
@keithfreeman5204 7 ай бұрын
Been flying model airplanes since 1959 from C/L to R/C. I build about the same sized airplane. I use Balsa and a .049 engine and 2 channels of radio. Fly all afternoon on less than a Quart of fuel.
@1theblacksheep
@1theblacksheep Жыл бұрын
I'll build that, now I'm committed. Thanks for the video
@friedlhochhaeuser6707
@friedlhochhaeuser6707 3 жыл бұрын
Just amazing! Congratulations and my respect for you!!!👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@Susceptive35
@Susceptive35 4 жыл бұрын
Emeğinize sağlık çok keyifle izledim.
@pondokmtk5587
@pondokmtk5587 3 жыл бұрын
Z
@eyalshalev839
@eyalshalev839 Ай бұрын
I build it and it is insane thanks dude 😎
@GA_TECH
@GA_TECH 2 жыл бұрын
The best tutorial, channel recomended
@babumohan4549
@babumohan4549 4 жыл бұрын
dear sir, the making of trainer is superb than flying.the bgm and other sounds are entertaining.thank you boss.congrats.
@hobbycornerkerala
@hobbycornerkerala 4 жыл бұрын
Welcome to Hobbycornerkerala.
@babumohan4549
@babumohan4549 3 жыл бұрын
@@hobbycornerkerala hi pls mention your link.thanks.
@Ayush-lr3bt
@Ayush-lr3bt 4 жыл бұрын
this is my first time on this channel i clicked on subscribe just after watching 5 mins
@r.a.tshorts17
@r.a.tshorts17 4 жыл бұрын
He could be lying
@vittorioqwerty
@vittorioqwerty 3 жыл бұрын
@@r.a.tshorts17 the real question is: IS HE?
@laurencesun_
@laurencesun_ 3 жыл бұрын
OMG SAMEEEEE
@negotinaz8992
@negotinaz8992 3 жыл бұрын
Baryaktar TB2💪💪💪 Nice work...Greetings from Serbia
@mr.pakistanihacker1850
@mr.pakistanihacker1850 2 жыл бұрын
Good bro awesome
@Thatgeul
@Thatgeul 4 жыл бұрын
I learned a lot from your video and was also inspired by your sensible production methods. Thanks~!
@DovlandRally
@DovlandRally 4 жыл бұрын
THERE YOU GO! :d
@somkidnotesrisamai945
@somkidnotesrisamai945 4 жыл бұрын
good
@melikbey2354
@melikbey2354 4 жыл бұрын
Where are you from?
@legendsoffortnite3835
@legendsoffortnite3835 3 жыл бұрын
Best and simple plane to make and enjoy
@eigenman2571
@eigenman2571 2 жыл бұрын
Finally, a legit DIY tutorial! That is one solid trainer
@panzatube3889
@panzatube3889 9 ай бұрын
I build it an it fly very well thanks
@hengli5609
@hengli5609 3 жыл бұрын
really cool buddy gonna do this later'
@mdshadab6009
@mdshadab6009 4 жыл бұрын
Excellent work man keep it up 👍👍👍
@user-nq9uk8do3h
@user-nq9uk8do3h Ай бұрын
i give this video a 10 out of 10 very good
@JamesRCPlaneTech
@JamesRCPlaneTech 2 жыл бұрын
Very cool. This makes me want to try this.!
@kadiryasinsit8492
@kadiryasinsit8492 4 жыл бұрын
Hocam ben kendimce başarılı buluyorum seni ve severek takip ediyorum. Yaptığın şeyi değerlendirecek ustalığa sahip değilim ama çalışma vizyonunu beğeniyorum.
How To Make RC Cargo Airplane. Diy Twin Motor Model Aircraft
34:45
KendinYap
Рет қаралды 3,3 МЛН
The Noodle Picture Secret 😱 #shorts
00:35
Mr DegrEE
Рет қаралды 30 МЛН
Why You Should Always Help Others ❤️
00:40
Alan Chikin Chow
Рет қаралды 125 МЛН
ИРИНА КАЙРАТОВНА - АЙДАХАР (БЕКА) [MV]
02:51
ГОСТ ENTERTAINMENT
Рет қаралды 2,3 МЛН
How To Make RC Plane At Home | Cessna 150 |  #rcplane
15:38
3JWings
Рет қаралды 1,4 МЛН
Man Builds Hyperrealistic RC Plane at Scale | Airbus A350 Replica by @RamyRC
23:50
Depron wing build
6:07
Andrew Newton
Рет қаралды 1,6 МЛН
How to Make Super Simple RC Airplane With Handmade RC
16:45
KendinYap
Рет қаралды 554 М.
Super Capacitor Plane
13:44
Tom Stanton
Рет қаралды 3,1 МЛН
How to make Slow Flyer RC Plane DIY
16:25
NumaVIG
Рет қаралды 1,8 МЛН
A AMIZADE DAS GÊMEAS É MUITO ENGRAÇADO
0:10
Teen House
Рет қаралды 26 МЛН
Saved this little girl
0:15
V.A. show / Магика
Рет қаралды 9 МЛН
Sigma Girl Past #funny #sigma #viral
0:20
CRAZY GREAPA
Рет қаралды 6 МЛН
My family Orchestra groups performs
0:22
Super Max
Рет қаралды 21 МЛН