How to Make Super Simple RC Airplane With Handmade RC

I used 3 servos for this model. The model can take off and land from short distances. That's why the nose wheel is fixed. A rudder is also not required on this model. Since there is no rudder, servo cost is reduced. And the flight weight is also slightly reduced. The model is structured as simply as possible. But it has a stable flight. It can also fly at low speeds. It is also suitable for beginners.
If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
2212 1400 Brushless Motor: s.click.aliexpress.com/e/_Ddc...
Propellers: (2-Blade 8x4) s.click.aliexpress.com/e/_Ddl... OR (3-Blade 7x4) s.click.aliexpress.com/e/_De5...
30A Brushless ESC: s.click.aliexpress.com/e/_DED... OR s.click.aliexpress.com/e/_DCg... OR s.click.aliexpress.com/e/_Dej...
LiPo Battery 11.1V 1300-2200mAh: s.click.aliexpress.com/e/_DBm...
35-40mm wheel (3 pcs): s.click.aliexpress.com/e/_DlC...
Micro servos (3 pcs): s.click.aliexpress.com/e/_DmZ... OR s.click.aliexpress.com/e/_DlZ...
Gold Connectors 3.5mm: s.click.aliexpress.com/e/_Dmx...
Wheel stopper (3 pcs)(2.1mm): s.click.aliexpress.com/e/_DCc...
Y extension cable: s.click.aliexpress.com/e/_Deg...
Adjustable Linkage stopper (3 pcs)(1.8mm Easy Link): s.click.aliexpress.com/e/_Dkv...
Pushrods: s.click.aliexpress.com/e/_DFa...
Canopy Hatch Lock: s.click.aliexpress.com/e/_DE3...
Fiber Strips Adhesive Tape (25mm): s.click.aliexpress.com/e/_DlM...
Fastener strip: s.click.aliexpress.com/e/_DnN...
M3x8mm screws: s.click.aliexpress.com/e/_DCB...
5mm Kraft Foamboard (2 plate)
Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw...
Runcam Camera: s.click.aliexpress.com/e/_DkH...
Hot melt Glue Gun: s.click.aliexpress.com/e/_Dln... OR s.click.aliexpress.com/e/_Dl2...
If you don't want to use handmade RC:
4 or 6 channel radio control system: s.click.aliexpress.com/e/_Dkv... OR
s.click.aliexpress.com/e/_Ddu... OR s.click.aliexpress.com/e/_DCP...
Some of the shops that sell Kraft Foam Board:
www.amazon.in/Pacon-Water-Res...
pacon.com/board-480/water-res...
tinyurl.com/4ups272k
www.foamboard.shop/en/foamboa...
www.enasco.com/p/Pacon-Water-...
www.mwmaterialsworld.com/es/p...
How to Make Remote Control (VIDEO): • How To Make 6-Channel ...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
DIAGRAMS and DETAILS: www.rcpano.net/2024/02/12/how...
Technicial Specifications:
Lenght: 86 cm (33.85 inc)
Wing span: 88 cm (34.64 inc)
Flight weight: About 419gr + battery weight
Center of gravity: 6.9 - 7cm from the front of the wing
Required control system: Min. 3 channels, 3 micro servos
Suitable battery: 11.1V 1300-2200Mah
Suitable motor: 2212 1400KV Brushless Motor
Suitable propeller: 2-Blade 8x4 or 3-blade 7x4
Flight Time: Approximately 10-20 minutes
Vbar: 0,701
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
#rcairplanes
#modelairplane

[@Kendin-Yap]

🙂If you like my projects and want to support me to make them sustainable... Patreon: patreon.com/KNDYP KZbin JOIN: www.youtube.com/@Kendin-Yap/join

[@Kendin-Yap]

Hangi linkler ile sorun yaşıyorsunuz? Malzeme linklerini kontrol ettim ve hepsi çalışıyor. HTTP ile başlaması ile ilgili sorunu anlayamadım. Bunlar Short URL lerdir. tinyurl nin kısaltmaları http ile başlar. Sorun nedir? Detay verebilir misiniz?

[@smoochies5056]

​@@Kendin-Yapis it ok to use ams117 on ebyte mdl05? I just add 2x 100uf?

[@NorthAfricantigers]

❤❤❤❤❤👍👍👍😍😍😍

[@stanbosgoed03]

How big is 1 plate of foamboard plassen respont and i wil build it

[@Kendin-Yap]

50x70 cm@@stanbosgoed03

[@Mk82cal]

what a time for a RC hobbyists has the last 15 years been when KZbin has provided a platform to hobbyists share all kind things they do to others...

[@red693]

Thank you for publishing this! I have tried this design. Of course, mine did not work as good as yours but I am making a second try. I suspect I had a faulty wiring, and one of the servos for the ailerons got disconnected. I had a bad crash at a second attempt of flying but it was my fault. Anyhow, it is a fun design and for me, a junior in this hobby, is a great example of how to create something that flies. Best of luck and thank you for the work you publish!

[@AKElectroDIY]

finally the rc plane builds are back!

[@hectorpena1119]

esta genial este proyecto me gusto mucho excelente diseño

[@danielm.3383]

Very cool! Reminds me a little of the OV-10 Bronco. Greetings from Switzerland.

[@msha6637]

i love you for this,, true DIY heaven

[@TinyHouseHomestead]

Nice OV-10 Bronco! 😁👍👍🇺🇸

[@adin-zb7uy]

Great,new model

[@amitkumar6784]

Very much low budget plane bro thanks for 💡 Idea and support from India 🇮🇳

[@fanatykfizyki9970]

I love your tutorials. I'm so glad that you wrote in the description all things needed to know. Thank you for yor adventage. I will use your project in a tournament in my school. ❤😅

[@grey7906]

Как же это здорово, когда есть время и место для изготовления и запуска моделей! И самое классное, что чуть ли не за пару часов можно собрать подобные модели!

[@yesterperdmo]

Wow this is amazing aircraft ❤

[@enzoskedelgado6817]

Crazy that plane is crazy man

[@ReerMiyi]

Very simple aeronautical engineering. I like ur landing too, I was expecting the wheel to come off. Better than BOEING.

[@user-sj8uq5sk7p]

Great Skill, thank you for your brilliant constructions !

[@deonddo]

Awesome!! 🎉

[@moegamatgamieldien110]

Brilliant design and simple. Thanks👍

[@MasboyRC]

Wow.. really nice 👌

[@uzelektroniktv8567]

Perfect

[@goodday92]

amaziiiing👍👍👍

[@emreonal16058]

Her zamanki gibi mükemmelsin hocam

[@MrJohng2001]

Brilliant as always thanks the great ideas.

[@yahyayahya-uf6bc]

Good man

[@tradingcryptoformationlibe3214]

Amazing

[@harungundogdu9602]

Her zamanki gibi mükemmel olmuş

[@g.p.7880]

Use magnetic suspension in wheel for soft landing 👌

[@ainred9921]

Très bien fait

[@minhnhat20229]

Hay và được đó bạn

[@motivational67624]

Good🎉

[@MarkHopewell]

Absolutely smashing.

[@benuewanmata3345]

I love this More videos for beginners too

[@TonySimpleCreative]

Amazing project. Where can I buy this kit ?

[@amateusguilherme]

Achei muito bom o projeto... Vou tentar fazer, mas no controle penso em colocar potenciômetro deslizante pra controlar o motor, o joystick é muito cansativo e tem mola, não fica numa posição só.

[@canerylmaz577]

eline sağlık harika olmuş,kontrol mesafesi ve havada kalma süresi ile ilgili bilgi verebilir misin

[@Kendin-Yap]

Kumanda menzili yaklaşık 2km. Uçuş süresi pile ve kullanıma göre değişir. 10-20 dakika aralığında

[@LimsTheChosenOne]

very useful thanks

[@muratilisik7281]

Abi eline sağlık idolümsün

[@bugra.ozkn0]

Kendi yaptığımız kumandalarda E01-ML01DP5 modülü antensiz ne kadar çalışır? Anten elime henüz ulaşmamışken denediğimde 1-2 metrede bile aşırı sorunlu çalışıyordu. Veri gecikmesi ve elektriksel gürültü gibi sorunları nasıl çözebiliriz? Bunlar hakkında video gelirse harika olur!

[@Kendin-Yap]

Antensiz menzil son derece düşüktür ve antensiz uzun süre çalıştırmanız tavsiye etmem. Bu aşırı ısınmaya ve bozulmaya sebep olabilir.

[@RCToysASR]

Nice sir I am from Punjab. India

[@robotia.]

Hocam sözleri örnek alarak kendim de bu alana atılım yaptım. Kanalında sizler gibi paylaşımlar yapacağım. Teşekkür ederim buna sebep olan kişilerden oldunuz

[@SaepulBAHRI474]

Just subcribed your channel...pls continue on making the video. It's very helpful

[@Kendin-Yap]

Thanks. All links are below the video. Click "more" or "show more"

[@tevfikkeskin1834]

amazing.. reminds me Bayraktar TB2

[@vdm7776]

Just scale to 10 times

[@ahmedmoustafa6829]

Great. What autopilot did you use?

[@Kendin-Yap]

I don't use autopilot. Manual flight.

[@minhnhat20229]

Hay quá bạn

[@servicenick]

Aferin sana! Cok guzel bir proje! Tebrikler!

[@chrisedwards2539]

How very cool!

[@kanjibhaidesai8893]

Great skill sir, very ecco projects 👍from:India 🇮🇳

[@yusufsamikaya2488]

Harika bir video daha kral abim

[@ozgurbozkurt5945]

Little tb 2. How do you create lift? Your wings do not have airfoil shape.

[@Alpwin]

uçak yapısı gereği fpv için uygun gözüküyor içine takılacak bir fpv sistemini taşıyabilirmi düşünceniz nedir?/// it looks like this plane is suitable for a fpv system can it carry the weight of the fpv system

[@Kendin-Yap]

Küçük bir kamera ve fpv vericisini taşıyabilir. Üzerine koyduğum RunCam II kamera yaklaşık 50gr dı ve uçuş karakterini etkileme di. FPV kamera ve vericileri genellikle toplam da 25-35gr dan fazla değildir. Yani sorun olmaz.

[@coc966]

Hey according to you what is the range of flysky ct6b? and which is better to make nrf based radio receiver and transmitter or to buy one commercial and only one more question is their mix setting in flyksy ct6b thanks.

[@samiabbasi4278]

Your project is very very GOOD and the plane fly with stability , what is the maximum RANGE for your transmitter ? It's fly sky or what? ...

[@Kendin-Yap]

About 2 km .. kzbin.info/www/bejne/mojUYWysqchjja8

[@atvali309]

Nice project ! Can we use 2 motor to x2 speed ?

[@Kendin-Yap]

There may be some speed increase, but not 2 times. For high speed, a slightly larger motor with a higher KV value can be used. But this model is not suitable for 2 times the speed anyway.

[@SeryKotyara]

looks like TB-2 ;)

[@huytrinh5227]

Can I replace the 2300kv motor and still keep the 30a esc?

[@Kendin-Yap]

Yes you can. And the propeller must be suitable for 2300KV motor.

[@KBW775]

Wow😮

[@walterdiaz2003]

impressive

[@user-uo5hc6hq6p]

videolarını çok beğeniyorum her videonla ufkumu açıyorsun.Hocam youtubede bazıları fırçasız esc devreleri yapmış ırfz44 mosfetler ile bunun hakkında bir video yapabilirmisin

[@falconxp2008]

fantástico

[@freesk8]

Nicely done! :)

[@sushmasurange160]

Can you pls make the tx and rx on a zero PCB board 🙏🙏

[@HydrO152]

I have built 6ch transmitter and receiver with Arduino and I'm also thinking to build flight controller with Arduino can i use both in same drone? Will it work? Or not? I'm confused however I'm gonna try but I'm just curious 🤔

[@hesselkramer1802]

Nicely done

[@denverli2008]

great video.

[@dmitrytrunikov7305]

@Kendin-Yap, nice work! What type of a clue did you use?

[@Kendin-Yap]

Hot silicone

[@SamuelPierre-tw9ie]

That's cool. Hiw high can it fly ?

[@AakarshBommaraju]

Hey, I am a begginer, and I have never made a rc plane before. Which video you recommend I watch and make using cardboard

[@Kendin-Yap]

First of all, it would be useful to watch this video... kzbin.info/www/bejne/sJeUlqiaZbGFgcU . For basic terms, equipment, etc. And it is one of the models suitable for beginners.. kzbin.info/www/bejne/gqu9ZYKnoMR9Z7s

[@AakarshBommaraju]

@@Kendin-Yap what can I do when the plane gets really heavy?

[@user-du3oj4yi9h]

Best project that I have ever seen. Can I use 1000kv brushless motor with propeller 1045 in this model ?

[@Kendin-Yap]

10 inch propeller is too long for this model. But you can use 1000KV and 9x6 (9060) propeller.

[@squidkid2]

This is a great video. I just have one question. How do you generate lift with a flat wing (not an airfoil)?

[@Kendin-Yap]

Airfoil is very important for increasing efficiency, but it is not essential for flying.

[@user-qv7ee9kb5y]

Bro plz make a 8ch transmitter useing stm32 microcontroller

[@binbin6525]

awesome

[@Daivik_-fy3nd]

could you please give more info about the RC and the electronics thankyou

[@Kendin-Yap]

There is a link to the RC video below the video.

[@Allah_Is_The_creater]

Is 1400 kv brushless motor work well with 8045 propeller? In turm of thrust and speed and avoid overheating?

[@the_Efe]

Çok güzel olmuş emeğinize sağlık. Bu uçağı orantılı bir şekilde büyütebilme imkanımız var mı? Daha güzel böyle model uçaklarınızı bekliyoruz.

[@Kendin-Yap]

Evet büyütebilirsiniz. Ama kanat tek bir katmandan oluştuğu için çok büyürse bükülebilir. Ekstra destek ihtiyacı olacaktır. Karbon çubuk gibi.

[@the_Efe]

@@Kendin-Yap klasik model uçaklarda yaptıpınız kanatlar olur mu

[@Kendin-Yap]

Evet olur. Ama düz kanat, airfoil e sahip kanat kadar verimli değildir. Bu yüzden büyük uçaklar için tavsiye etmem. Burada amaç hobi amaçlı basit ve motajı kolay, düşük maliyetli bir model yapmak. @@the_Efe

[@the_Efe]

@@Kendin-Yap biraz daha gelilmiş bir şelilde olmasını istediğim içim öyle yapmak istedim düz kanat yerine başka ne önerebilirsiniz

[@ugursonerkuzu3117]

Elinize sağlık. Bi sorum olacak. Motoru arkadan taktığımız öndeki gibi açı vermemize gerek yok galiba doğrumudur. Teşekkürler

[@Kendin-Yap]

Evet gerekli değil.

[@ugursonerkuzu3117]

@@Kendin-Yap teşekkür ederim kolay gelsin

[@ahmedwaly9073]

amazing

[@3DAnlatimlar]

abi mükemmelsin

[@antonioc7735]

Ciao ,complimenti per il video . È un po' che ti seguo ,ottimo canale di modellismo . Ti volevo chiedere che modello era la tua pistola di colla a caldo?

[@Kendin-Yap]

"Bosch Pkp 18 E" and "Einhell TC-GG 30"

[@antonioc7735]

Ottimo grazie mille

[@karolvikt]

❤

[@sadiqkilledar546]

hey for this rc plane your 6 channel nrf24l01+pa lna radio receiver and transmitter range be enough like 130-160 meters?

[@mehmetmala6310]

Kral❤

[@krazul7212]

selam abi senin bu uçağın ölçülerini 1.6 ile çarparak 140 cm bir kanat uzunluğu olan halini yaptım ve çok güzel uçuyor kullandığım motor 2217 1250kv 10x6 parvane 3s lipo pil ama karbon boru ile kanata ve arka kuyruğu tutan yere güçlendirme yapılması lazım

[@RcDude2289]

2200mah flight time?

[@Kendin-Yap]

15-25 minutes. Varies depending on usage style and weather conditions.

[@sajidakilledar779]

Can use depron instead of photoblock?

[@Kendin-Yap]

Yes it can be used.

[@madzen112]

Guessing this is still the cheapest way to get into RC 🙂

[@IndraKurniawan-vk2qb]

Have you ever thought of making some flying wings?

[@morekmek]

Kolay gelsin ustam, Flysky İ6X kumandalarda Failsafe modu var mı? Teknofest'e katılacağız ancak Failsafe modu olayı kafamızı biraz karıştırdı.

[@Kendin-Yap]

Evet var. Ve kullanımı ile ilgili bir çok videoyu youtube da bulabilirsin.

[@kumavatroyals]

Mera rc plane ka weight 2kg ka hua Mai konsa motor use karna sir

[@IshakCelik.]

Hocam yine fevkalade bir video❤

[@Incorruptus1]

Is it waterproof?

[@Kendin-Yap]

Of course not

[@anthonydelagarde3990]

thank you!!

[@kenan8795]

what range it has, how long in the distance it can fly?

[@Kendin-Yap]

The remote control range is 2000m+

[@books22133]

What is the maximum range of this plane?

[@Kendin-Yap]

about 2km

[@dem1r489]

hocam uçağı uçurduğunuz pist nerede günlük olarak ücret ödeyip pisti kullanmak mümkün mü

[@Kendin-Yap]

Günlük uçuş yok bildiğim kadarıyla. bu siteden inceleyebilirsiniz. imuk.org.tr

[@nizarsakr6584]

Great @

[@peruccaeditz]

First🤟

[@sophany55]

Bravo

[@eng954]

Çok beğendim. hemen like atıp abone oldum. Kumanda mesafesi ne kadar?

[@Kendin-Yap]

2000 metre+

[@Unfunny_F-16_Fanboy]

Kiidna looks like the turkish tb3

[@cartoontv7650]

where do you have attached the back fuselages in the wing? please reply

[@Kendin-Yap]

I added a new diagram to my website with details. Please check it. www.rcpano.net/2024/02/12/how-to-make-super-simple-rc-airplane-with-handmade-rc/

[@cartoontv7650]

@@Kendin-Yap Thanks very much