How To make Reed Valve Work Properly on a 66cc 80cc Engine

[@willpresnell81]

I learned more about reed valves in 4 minutes from you than I've been able to learn in the last 4 weeks, you have a real good way of explaining things.

[@RinegnProductions]

thanks bro join the facebook group if you need any more help at Heavily Modified Motor Bikes

[@TheLouisamite]

Man I have learned more information from this one video than I have from 100 other ones,,,,great job I really appreciate your time and effort to explain this so people can understand how these reeds really work

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@michaelluciano7774]

I took your advice and made my own windowed piston with a reed valve bought from Amazon, and it worked out great. Now I have plenty of bottom end torque, and don't have to use much throttle anymore. Now I just need a dirt bike ignition coil to burn that extra fuel being pushed into the cylinder head, thanks for your video, it saved me some money.

[@RinegnProductions]

Glad it worked out for u

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@warrenfox707]

You are very knowledgeable young man I enjoy watching all your shows you give a lot of intake thank you😂

[@RinegnProductions]

thanks, if you have any questions, just let me know.

[@fredbowser8052]

Best video on reed valves, windowed pistons and transfer ports I've come across. Thanks

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@2strokecarbtuningportingin187]

Subscribe learn

[@Paul_Gale]

well said my friend first tinme i seen side transfers open to piston , very cool thanks for posting , appreciate it

[@meanderingmike7640]

Man ill be damned dude explained the shit in depth and straight to the point without all the bs most of these guys talk about 👌 hell yeah man keep it twisted bruh

[@jakobwest5296]

Hell yeah this helped a lot cause I have a 80cc stage 4 reed valve kit and a 24mm carb and it don’t run right at all jetting seemed to help but not much so this video just unlocked a whole new thought and project

[@kyle12367]

i needed this exact video, i thought i had to make a 3rd transfer now i know i dont need to

[@hybriddyneguy]

Thank you for educating Me about transfer ports! You are My hero for today !!!

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@RicardoTeixeiraCarromeu]

Well I have reed valve on mine with a PWK 24 with adjustable power jet valve. I don't have a window piston but I do cutted the bottom of the piston matching full open at TDC, it works fine 67kms / hour but I will do a window on in the piston ... Good video buddy !

[@RinegnProductions]

u dont need a window in the piston. i know u want to do it to test it out. so just do smaller one bcuz a bigger one would make it run horrible. ... I would recommend ordering a new piston anyways, and just lighten it up by drilling holes on the outside of the intake hole. i wouldn't touch the skirt no need to. if you go on heavily modified motorbikes facebook you will see different pistons.

[@RicardoTeixeiraCarromeu]

@@RinegnProductions exactly. I'm thinking drilling and keep the drill orifice about dia. I don't know yet. Yes I have few pistons 49mm my rod is AF80 so a long rod . Ports on the cylinder are clean etc but you know some people can't stop, otherwise where is all the fun besides riding the bike 😉

[@YorHighness]

New Jersey loves your Vids.

[@RinegnProductions]

Your Highness thanks bro

[@kd9432]

Straight to the point

[@2strokecarbtuningportingin187]

kzbin.info/door/PRPIP5uWB5cR8LgQq4qTDA

[@jimnagy9721]

What seems to work best the third transfer port and stock piston with reed valve or window piston with reed valve . What's your opinion on what worked best for you ? .

[@RinegnProductions]

window piston with reed valve is for something if you plan on having high rpms but the stock piston or shall i say lighten piston with no window and a third transfer port from the cylinder will have great low end

[@g-track5065]

Did you balance the crank?

[@nicoapi7401]

You safed my life bro 😅👌

[@shanekersey4507]

Nice Work On Those Pistons. And The Jug. I Had A None Reed GT-5 Skyhawk Port Matched. Ported Jug. It Ran Like A Beast.

[@Eduardo_Espinoza]

Is it true that the boost bottle is for the fuel mixture from spitting back out?

[@matthewsteva1917]

sorry i know this is a old video but have you tried oz reed valve with no window piston with a g4 cylinder

[@ruddig]

yup gotta say , you made it understandable thanks

[@RinegnProductions]

thanks bro

[@RinegnProductions]

more help at Heavily Modified Motor Bikes

[@Nickpeezy94]

I subbed homie are you from Chicago area ? Knowledge is POWAH lol

[@RinegnProductions]

NickPeezy 94 Louisiana and yep lol thats wat I was taught

[@TheLouisamite]

I'm from hammond La my brother

[@2strokecarbtuningportingin187]

kzbin.info/www/bejne/rIumpXadZbGIi8k

[@ronaldjerrimmy4659]

a thank you folks needed there info good looking peace

[@SloppySFXbOx]

i like your stockc exhaust intake manifold smart

[@RinegnProductions]

Thanks bro lol

[@JamesPiccone]

So if I have the g4 cylinder that already has open transfer ports will that work in conjunction with windowed piston? Or do I have to have Reed valves with that? Also do you have to have third transfer ports? What the deal with that

[@RinegnProductions]

If it has a third transfer then you can use a stock piston with the reed valve and if you want to ise a wi dow piston you must have a reed valve

[@guybarnett131]

Thanks bro for the info!

[@art070769]

If a third transfer port is added to the cylinder will the piston wear out faster? The area of the cylinder below the intake port is where the piston skirt rides to stay straight in the bore. With a 3rd transfer port added there is less surface area for the piston skirt to slide against so it may wear out faster and score the piston. Have you found this to be a problem?

[@adam_-adam]

I have a question, ive been havin all kinda problems tuning my engine and thought it was carb problems but now thinking its a other problem, its a reedcase engine and has the 4th and 5th ports or 3rd port what ever its called but my piston doesnt have any windows on it, i can rev the engine to about 75% throttle but just sputters after that like as if the carb was too rich, do you know if the piston needs windows? Cuz im thinkn of dremel'n the piston hoping this will fix the prob, thanks.

[@kapn4611]

I’m late as hell, but that sounds kinda like a jet problem

[@veselinBondov]

Hello my friend! I wanna ask you something,I wanna run my bike with no reed valve,with window piston and 3rd transfer port cylinder,so how its run it,good with power or something in middle? Thank you!

[@RinegnProductions]

A windowed Piston and third transfer booth req a reed valve neither one will work with out a reed valve

[@jaayse]

he addressed this in the video.

[@heavystarch100]

Awesome...but my OCD wont tolerate dirty parts! 🤣🤣🤣 I spend a gang of money on degreaser!!👍👊

[@johnnathan9538]

Gas cleans stuff up well also.

[@Leo-du5dd]

cool video buddy

[@RinegnProductions]

Leo thanks bro

[@bw2878mw45]

Thanks bro, 👍 good info

[@pitbikehype5281]

The piston with the little hole would you get more top end then a non window piston ?

[@alekseyz6245]

Nice vid bro

[@mrnick8171]

This was helpful

[@matthewsteva1917]

you can get a high high compression head or three spark plug head combian with boost bottle behide it if the any gas still getting out but that experimentle plus i wonder you use two calibrators on it one guy did on youtube go more power

[@dougknight1721]

Just the.facts. thanks very helpful

[@Motorizedstuff]

We're do you buy the window piston I need asap

[@RinegnProductions]

Ebay or you can make one ur self

[@teamgrasachannel219]

can boost port or 3rd transfer port work without reed valve?

[@RinegnProductions]

No

[@art070769]

What size carb do you run with the reed valve and window piston setups?

[@jimfitzgibbon5492]

great video, thanks!

[@g-track5065]

I want to see you run

[@Littleevil9975]

Nice bike bro good video

[@treejay818]

Can you still port a piston without a Reed valve and still increase power ?

[@RinegnProductions]

Engine will not run

[@matthewcartelli2625]

Subscribed ... man thanks you good

[@ramadanstromer5325]

I ordered a window piston and put it in my stock engine do you need a reval for that piston to work?

[@RinegnProductions]

Yes

[@ramadanstromer5325]

@@RinegnProductions thanks bro💯

[@ramadanstromer5325]

Hey bro I got a BBR engine do you have to leave the stock head on to break it in properly

[@RinegnProductions]

Ramadan Stromer no, and u can put ur other head on, also make sure ur piston is facing the right way also make sure piston clips is in correctly, also take the head off and make sure there are no aluminum shavings inside the motor

[@ramadanstromer5325]

@@RinegnProductions ok Because I started it up but it was running and it just die I have a racing head on it in a aftermarket pipe

[@psymetal]

Can you not use a reed with a boost port cyl?

[@RinegnProductions]

You need a reed with a bosot port

[@louisaquilina3380]

if the cyclinder if a open the boxes is more p0wer?? put risk more seas pls .can you ansered me pls☺Thks

[@RinegnProductions]

Yea?

[@RinegnProductions]

Join the Facebook group in the description

[@waterboy4124]

Is it going to seize easier with open transfers. Ummm, you'll find out. Chainsaws run this drsign. 5oz oil per gallon.

[@RinegnProductions]

@@waterboy4124 yea Ik that but thanks tho bro

[@waterboy4124]

@@RinegnProductions i guess i was translating his englash. I have a no transfer walls cylinder i made but havnt run it yet. So im wondering too. Yours look good so Im encouraged to give it a go.

[@jeremiahfogg4836]

Maybe you can do a video of lightening a piston port piston. I have a idea on how but not 100%

[@dannytorino851]

Dont drill any lighting holes on the exhaust side of the piston. The compression will leak thru the exhaust port and wont run.

[@joneserupinsmoke9161]

Bro all u need to do speed runs with em in engine

[@jonnyc2.047]

i meeen is 150 cash plus 20 cash for a 3yr watty and 150cash fior a zada 80 zal stamp rod u think thats fare i have nother guy selling pk wald cat for 150 hole kit and lastt guy selling a g7whith all bells and wisles for 240cash alll i whant it lot to ask i no is 4hp

[@jonnyc2.047]

fierstorm was one

[@jonnyc2.047]

CAN U FIND ME THE SAME MADFULL U HAVE FOR UR CARB IDK HOW U GOT IT I GGUSS U HAD IT MADE OR MADE IT LMK WHERE TO GET THAT SAME INTACK I HAVE THE CARB U HAVE ON YR BIKE BUT NO FUCKING INTACK MAN PLEEZZ DUDE I DO HAVE A NOTHER MUFFLER BUT 18 CASH TO BUY A NOTTHER IS NOT RIGHT

[@g-track5065]

I need help my dog!

[@RinegnProductions]

@@g-track5065 with what?

[@noohopeforhumanity6245]

Your kinda right but kinda wrong about your information your telling the people watching your video