How to make ROAD SPIKES !!!

Road Spikes for the end of the world !!!

[@borntocreate5818]

I want to build something crazy for my next video ! Any Ideas ??

[@christsrevenge8030]

Hello! Please show us what you've been working on! You are deadly and your Vice is straight from Home Depot!!! Hehe!!

[@iffatnaveed4569]

Idk sorry

[@geraldhoskins2021]

Hey would jb weld or epoxy work if you dont have a welder?

[@francoisleveille409]

Use steel tubes instead of just a steel bar and these with empty the air in tires instead of just puncturing them.

[@Invisus_Letum]

how about electrifying a door handle with 220v and a hidden I/O switch, its a fun build and has many uses i.e. to keep crackheads from trying your storage unit perhaps in an apartment setting

[@fractal4284]

I would recommend using steel brake line since it is hollow and we'll let the air out extremely fast less likely for the spike to stay in and just plug the hole

[@casimirkulikowski5949]

Love the video, also helpful suggestion, if you make those out of pipes instead of solid rod it will let the air out through the hole

[@victorkramer2596]

You can also cut a groove

[@selfactualizer2099]

you loose a lot of structural integrity, or would have to invest in a stronger metal

[@yc6683]

I think a hollow tube would make the bending and welding more difficult.

[@nivek5031]

@@yc6683Not a critical issue that. 😉

[@koningbolo4700]

best to use a thick walled hollow pipe (maybe 6-7mm or so in OD) because a rod will puncture but will also plug up the hole (even if the spike is launched from the tire at speed) A hollow spike will deflate the effected tire in about 15-25 seconds...which should be enough to get rid of the following assailant effectively... If you can not find steel tubing in a smaller OD then at the very least use a larger OD rod (maybe 8mm) and slice a groove down it to make sure the rod will pierce and allow air to escape past it...

[@nobragjustfact6107]

Where would I find that at?

[@koningbolo4700]

@@nobragjustfact6107 Probably amazone but the diy (stealth) builder would most likely use two large slotted spring pins, sharpened and welded together... www.keysandpins.com/images/stories/virtuemart/product/roll-pins.jpg

[@richardkritikos6578]

The FBI, DEA, FEMA and DHS hate these... Reminiscent of Vietnam era tactics. No Tresspass means don't come over here...

[@1steelhorse4me]

2 things. If you're going to use a cut off wheel to form the point, why not just mark the entire rod to the desired lengths and cut the pieces off, one by one, at an angle. That would eliminate the entire bolt cutter step. Secondly, if you bend the pieces closer to 70 degrees, instead of 90 degrees, the points would sit vertically.

[@thetrain5785]

AZ X RINGER o your that guy hu! Make your own vid u fuckin clown

[@borntocreate5818]

The Train Thanks man :)

[@TonyRule]

@FMJPatriot AZ X RINGER's comment is spot on - just cut the rod on an angle with the cut-off wheel in the first place instead of this double-handling bollocks.

[@yc6683]

I was going to point out the same thing that a bolt cutter is unnecessary.

[@nhwnhw02]

​@yc6683 If you use large nails, just cut at an angle with bolt cutters. They don't need to be super strong so nails are perfect.

[@francoisleveille409]

These are also called 'caltrops' .

[@Okiedokie94]

In Mexico we find them for free on the roads 😂

[@davejalenderki]

You can conect them with a small chain so that they are easily removed if they are used for trespassers.

[@Anon-te6uq]

I think we call that "barbed wire"

[@davejalenderki]

@@Anon-te6uq I was thinking caltrops. Illegal to buy. Illegal to own. Very easy to make. Excellent for perimeter safety. Extremely painful when stepped on. Very efficient at rapid deflation of tires. Can be built from almost anything. When connected with a small chain or light duty cable, they can easily and completely be removed for your own safe passage.

[@foxtrot-Luv]

that sir is genius in it's simplicity

[@foxtrot-Luv]

doesn't look like any razor wire I ever saw. (what's it's actually called now)

[@davejalenderki]

@@foxtrot-Luv You could also drill a small hole into each one and thread a piece of 100 lb test braided fishing line through each in the middle but tying the ones on each end to the string. That braided line will blend in with its environment and will be strong while resisting the elements.

[@303jagter]

Nice video, if you cut your sections with the grinder at the angle you save "bolt cutting time" and its already sharp :-)

[@borntocreate5818]

Dankie ou bul !

[@303jagter]

Ek self besig, ek het `n dun stainless kabel wat mens vir elektriese heinings gebruik om `n string aanmekaar te maak, jy kan dit oor `n pad sleep en n reguit ry dwars oor die pad vinnig ontplooi. Vaskap mater, ons gaan mekaar se hulp nog nodig hê, altyd lekker om planne te maak :-)

[@thomaspike1475]

Or just use the bolt cutter at an angle.

[@kainekk9512]

Definitely a union worker lol good job buddy

[@shawng7902]

Why would you say that? Like a bunch of on strike union workers would be searching ways to make such a thing. Lmao.

[@kainekk9512]

I'd say that because that's what we do that's our buisness.. been shown this years ago which is passed down by generations.

[@selfactualizer2099]

now I can get those kids to stop drifting all night outside my window when there's a million other bigger parking lots not next to windows

[@ejh524]

Thanx for the video...appreciate your time you took to do it 👍 got to love the "you should haverr's " 99 percoc don't do nothing

[@jonathankr]

2x speed this one...

[@joewoodchuck3824]

They're called caltrops.

[@kouranko]

If you cut that on an angle would it be sharp enough so you didn't have to use the grinder?

[@cdwwillow9671]

Hollow pipe would be better!

[@greenoftheforest8953]

Shouldn't it be a metal tube to let the air out? And have an extra hole drilled into it as well, in case it bends and closes..

[@basstomaketheworlddeaf6153]

1:53 Dang he hit it so hard that reality began to distort itself.

[@selfactualizer2099]

camera shake creats distortion..

[@kadenswansonmusic7662]

Without hollow tubing the air won’t leak out, will slow them down just not as fast

[@twinblade2623]

Friend those are caltrops

[@davida8340]

Awesome! Please make more videos. This is a great, concise analysis. Much better than most of the junk out there

[@axxusb8888]

Brauchst mal ein guten Schraubstock :-)

[@borntocreate5818]

Or a better welder ? : )

[@tannerlane9669]

Everyone in the comment is a weirdo as if the guy doesn’t know what he’s doing

[@tp7393]

Good job...Forget the critics!

[@motoz30]

every "critic" has provided factual information, which would make a more effective product. love it when facts are deemed criticism. truly the age of bullshit.

[@Raao1]

Dear americans Many people live in apartments and don't have access to the equipment shown in the video. How about showing a version of diy for people who are not a metalworkers?

[@haywoodyoudome]

It's not America's fault you were born in the third world.

[@BigDudeNinja]

That's the way to make these in a basic form. There is adjustments you can make to these to make them better also. Trial and error.

[@АлександрЕгорович-м8п]

А не проще сразу резать болгаркой?

[@mandataruu8685]

keep them in oilmixed with diesel so when pentrate tirres will get out from presure.. and not stay there by rust friction

[@bishop2355]

What size rod are you using?

[@borntocreate5818]

8 mm 8>)

[@nimbly1693]

The ones on mythbusters just smooshed. Maybe they need to be heat treated?

[@gregorysouey2367]

You know if you just cut them on an angle on the first cut you dont have to cut the angle in and go straight to the bend

[@chasechaffins4256]

Why wouldntnyou bend them THEN cut them?

[@melanie4926]

Nice😊

[@sdaniel123]

Did you test it?

[@HelloHaven98765]

Why is this allowed on KZbin?

[@boozecruiser]

Because it's based

[@lsmnndhherrerre]

Trucks

[@russellharvey8590]

UKRAINE !!!!

[@hixy65]

You're

[@iffatnaveed4569]

Lol

[@prepperonnisurvivalist8983]

BIG LIKE.

[@borntocreate5818]

Thank you !!!

[@brockkobal1505]

I doubt thoughs ones would work because it would just plug the hole and not let air out just put a little groove in it and it would work better

[@vegalicious7693]

This is illegal and you’ll be culpable for any injury or death if vehicles crash

[@jeffreylund7506]

Don’t be Ghey.