How To Make the BEST Homemade Deep Penetrating RUST KILLER EVER! With AMAZING Results

It's Time to Rust Proof! Ingredients #1. amzn.to/3Cr6FNi #2. amzn.to/3C048bi #3. amzn.to/3Rtu4lp
THE BEST Ceramic Coating EVER goo.gl/z9TrgR
ALERT!!!!
THROW OUT your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
Clear Coat Videos
Plastic • NEVER Clean Your Car o...
Bumper • The FASTEST WAY To a R...
TOOLS
______________________________________
Ratio Mixing Cup amzn.to/3y5uZBC
Best Hand Sprayer amzn.to/3SnttTz
40 amzn.to/3Rtu4lp
Blaster amzn.to/3C048bi
Rust Preventer amzn.to/3Cr6FNi
Air Compressor Spray System amzn.to/3BVSqOW
Paint Mask amzn.to/3UVY4t1
Best Clear Coat amzn.to/3Rvwu30
303 amzn.to/3ruIozj
The compressor we suggest is amzn.to/3CpIBsL
For those who have an Air Compressor: Sprayer We Suggest amzn.to/3SwrjRt
The extremely small compensation we receive from these amazon links helps to keep our channel
available to you for FREE viewing!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@SweetProjectCars]

Hello Great subscribers and Friends...This is our newest and most potent Rust preventer, Rust Killer, and Rust stopper we have ever made it is simply off the charts on how it works you will love it. Quote of the Week *Motivation is a fire that comes from within YOU and YOU alone. If someone else tries to light that fire in you, chances are it will burn very, very briefly.*

[@JustinPaul1st]

Lets do some rust work some where and do a six month review and twelve month review too👌👌👌

[@iancampbell4296]

Hi from Aus, The ingredients you used I've never heard of, are there other names for these products. Cheers, Ian.

[@stevejames1563]

Maybe put thick ingredient in funnel first, and thinner components next and clean out the funnel ? How much does this firm up after drying ? Great Video !! 😎

[@SweetProjectCars]

Sounds good Steve! Thank you for watching and sharing, have a fantastic week my friend. mad Mike the hammer SPC

[@yvonnesmith2578]

You guys are so Amazing!! I have learned so much from your content over the years. Thank you, thank you!😊

[@SweetProjectCars]

Our pleasure Yvonne! Happy to help. Thank you for watching and sharing, hope you have a great week my friend. mad Mike the hammer SPC

[@bt8143]

Thank you so much Mike! I love the horizontal bead board walls!

[@SweetProjectCars]

Thank you BT we truly appreciate that my friend have a fantastic day mad Mike

[@randolphsnyder1505]

Like to try it,but pray tell what is " blaster " and "40 " and " rust proofer " and does this etch the metal?

[@SweetProjectCars]

Here are the 3 ingredients 40 amzn.to/3Rtu4lp ; Blaster amzn.to/3C048bi & Rust Preventer amzn.to/3Cr6FNi and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike

[@lega78]

Your channel just showed up in my KZbin feed, let me tell you; I'm loving it !! Thanks so much!!

[@SweetProjectCars]

So glad! Welcome my friend, we really appreciate the view and comment, have a stupendous weekend and enjoy the vids lega78. mad Mike the hammer SPC

[@s.p.t.4680]

Mad Mike does it again. Keep up the great work.

[@SweetProjectCars]

Absolutely SPT! Hoolio gets the credit for this one! Thanks for watching and commenting, we truly appreciate it and hope you have a great week my friend. mad Mike the hammer SPC

[@luismayen3542]

Keep up the great work. I love your videos. So informative.

[@SweetProjectCars]

Thank you so much Luis! We truly appreciate the view and comment, makes all we do worth it my friend, have a great day. mad Mike the hammer SPC

[@mr_big_pea_pea4013]

Nice! Thinking we all need to do this while the products are still available!

[@SweetProjectCars]

For sure, it's that time of year as well. Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC

[@martymcfly3986]

i have been spraying fluid film with the air gun, loved this mew mix. will do it this year. thanks man!

[@SweetProjectCars]

Nice Marty! Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC

[@tedmorrison8632]

I'm definitely going to try this Mike I've got a really clean 2008 F350 diesel dually. Thank you!

[@SweetProjectCars]

Awesome Ted, this will keep it clean! Thanks for the view and comment, hope you have a great week my friend. mad Mike the hammer SPC

[@Sheeeeeeeeeeeeiiitt]

I’ve been using the ATF/PB/Dawn concoction you shared with us and swear by it however the products you have listed are certainly worth their weight in gold.

[@SweetProjectCars]

We're always improving JP! Can't stop Hoolio from his lab concocting, he loves it and is always looking to make things better! Thank you for watching and commenting, have a great week my friend. mad Mike the hammer SPC & team

[@lanceroberthough1275]

What is that mixture for? Thanks!

[@user-mb9yf6qg1v]

Still using that , too.

[@dalemcinnes1834]

I'm still trying to figure out what the ingredients are.

[@nothankyou5524]

I'd not he a fan of the soap, as it adds viscosity, but if it works, it works. PB is primarily acetone. The ATF could only add viscosity. I've used acetone or lacquer thiner 70% to Dexron 5 30% and found it works well, especially with a little heat, so it's drawn. Dex 5 is low viscosity. Dex 3 is/was high viscosity. I rebuilt a fair amount of Chevy small blocks. The older, the more seasoned, the more time tested, the better. I've also found there's a commercial brand that cannot be beat, regardless of what any home maker/home tester says. But that'd just me. I just don't spend money, mine or others, amateur that I am at times, or not, when not needed. And no, I don't ever run out of anything. That just shows poor workmanship. Best wishes.

[@jdretiree2433]

AAAHHHH yes, the mad scientist at it again. Thanks!!!!

[@SweetProjectCars]

He is always up to something 😎 thanks for watching hope you have a great week my friend. mad Mike the hammer SPC & Hoolio

[@grassroot011]

Lots of good ideas from your channel. and for a tightwad like me,, good stuff. thanks

[@SweetProjectCars]

Glad you like them! We are always looking to help our viewers save $$ especially right now :( Thank you for watching my friend, we really appreciate it, hope you have a great week. mad Mike the hammer SPC

[@pyrrhus17]

Thanks for this , it will be a god send here in Florida. This should be in a new home owners kit !

[@SweetProjectCars]

LOL, you're right Fiore! Thank you for watching and sharing, have a fantastic week my friend. mad Mike the hammer SPC

[@jons2447]

Thank you, Mike!

[@SweetProjectCars]

Our pleasure Jon! Thank you for watching and being here with us, we truly appreciate it, have a great week my friend. mad Mike the hammer SPC

[@hcoleman2538]

Great video! I'm going to try this on a seized o2 sensor

[@SweetProjectCars]

Soak it in there good for about a week, it will un-seize! Thanks for watching and sharing ,we really appreciate it, have a fantastic weekend and all the best on your project my friend. mad Mike the hammer SPC

[@razorsharpbt124]

Julio's Lab is always putting out new concoctions! Hoolioooooooooooooooooooooooo!

[@SweetProjectCars]

He loves creating razorsharpbt, we call him our mad scientist :) Thank you for watching and for the comment, hope you have a great day my friend. mad Mike the hammer SPC & Hoolio

[@rxlo1015]

Excellent 👍👍👍

[@SweetProjectCars]

Glad you liked it RxLo10! Thank you for watching and sharing, we really appreciate it, have a fantastic week my friend. mad Mike the hammer SPC

[@beverlyhills1382]

Hi! Thank you for the videos. They are truly a money and time saver. Can you use the same products in spray cans?

[@SweetProjectCars]

How ever you want to apply it, we recommend this amzn.to/3x0PONM if you are using a mechanical spray tool/can with an air compressor, you can also apply it with a brush if you like. Thanks for watching and asking, have a great week, and all the best on your project my friend. mad Mike the hammer SPC

[@jamesdowney3459]

Can we use it on rusty fender where there is rust. Will it bother the paint.

[@SweetProjectCars]

Yes you can use it on a fender if you want to stop the rust and it won't bother the paint, but you are better off to use this amzn.to/3VsdINd on the outside of the vehicle. Thank you for the view and question, have a great day my friend. mad Mike the hammer SPC

[@jamesdowney3459]

@@SweetProjectCars THANKS 🙏

[@onlythetruth883]

What is the blaster? What is the 40? What is the rust proofer? I don't have a clue.

[@SweetProjectCars]

As stated in the video by Hoolio, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@billy2bob63]

Is this better than your previous formula using transmission fluid, blaster and dawn ultra? I used that formula sprayed it on my Ford explorer sport trac then drove it up and down a really dusty gravel road to in case it lol

[@SweetProjectCars]

Hoolio is always looking to improve his concoctions Kerry, can't stop him! Thanks for watching my friend, it's always a pleasure, have a great week. mad Mike the hammer SPC

[@LifefeedsonLife]

I’ve used this type of mixture before in different ratios but have added ospho which works really great as well. Just make sure and use a respirator guys!! Safety 1st!!

[@SweetProjectCars]

Thanks for sharing, have a great day. mad Mike the hammer SPC

[@rickdff62]

SPC comes thru with the secret sauce yet again! Hea Mr. Mike, do you think it would benefit from rubbing it in with a rag or best just leaving it slippy sloppy? Thanks boss!

[@SweetProjectCars]

Just spray it on, it soaks into the metal. Try this, make the mixture, take a q-tip, put one dab on a rusty area and let it sit for a day then come back and see how well it has soaked in, you will be blown away Nooby. Thanks for watching and asking, it's always a pleasure my friend, hope you have a great week. mad Mike the hammer SPC

[@rickkrockstar]

This Channel is way to SWEET.

[@SweetProjectCars]

Thank you so much RickK, we really appreciate the view and comment, hope you have a fantastic week my friend. mad Mike the hammer SPC

[@DS-bi3fz]

hmm... the rust preventer glop you mixed in seems to be something other than the FF linked in the description (as FF isn't described as being THAT viscous). Are those really the same, or is the gloppy stuff some other product? If not the same, and FF less viscoud, are the mixing proportions still per the same recipe, or do you wind up with something too thin when using FF?

[@SweetProjectCars]

It's this amzn.to/3Cr6FNi no secrets DS just follow the video to a T and use the same products/tools for success. Thanks for watching, have a great week my friend. mad Mike the hammer SPC

[@MichaelR58]

Good video , thanks for sharing , God bless !

[@SweetProjectCars]

Thank you Michael we truly appreciate that my friend have a great day mad Mike

[@luismayen3542]

Thanks so much! Can this be used on the rubber under the car so they don't dry out?

[@SweetProjectCars]

No this is not to be used on rubber, you want to use either of these for your rubber amzn.to/35GTcka or amzn.to/2WQg0sB Thank you for watching and asking Luis, have a fantastic day my friend. mad Mike the hammer SPC

[@yobingbongyah4676]

are you spraying it on and leaving it or breaking down the rust and washing it off?

[@SweetProjectCars]

Spray it and leave it my friend. Thanks for watching and asking, have a great day. mad Mike the hammer SPC

[@mauricebarnett6951]

Oh and ive just put together a mixture of the last recipe you put up, blaster Dawn Liquid and auto trans fluid

[@SweetProjectCars]

No worries Maurice, use that up, then next time give this mix a shot! Thanks for watching, have a great week. mad Mike the hammer SPC

[@leakyjeep5.9]

Great idea! I just wish there was a cheaper option than the fluid film sprayer.

[@SweetProjectCars]

I totally agree, that's why we use these amzn.to/3SnttTz The best we have found! Thank you for watching leakyjeep, we appreciate it, hope you have a great week my friend. mad Mike the hammer SPC

[@charlesronk2989]

Could you put this in a pump up sprayer cut the wand using a longer tube to connect each half then feed the tip half into the fram of my boat trailer to treat the rust inside.

[@SweetProjectCars]

Absolutely charles! Thanks for watching and asking, have a great week my friend. mad Mike the hammer SPC

[@johncooke1386]

Thank you for the reply. I don’t find “more” on my listings. There was learn more that went to an ad for a local car dealer. If you could list the products needed, I would be grateful. Thank you, John

[@SweetProjectCars]

It's these items amzn.to/3Rtu4lp ; amzn.to/3C048bi & amzn.to/3Cr6FNi The ....more is directly under the video, which is where you will find the products/tools we use. Hope this helps John, thanks for the view, have a fantastic day my friend. mad Mike the hammer SPC

[@daver8298]

Does it dry? Is it sticky? Need to do my truck before I hit the beach with it. Will the sand get stuck in the coating? Thanks!

[@SweetProjectCars]

You are going to leave there like fuzzy wuzzy was a bear. If you are going to undercoat it with something that's not sticky, you need to use this my friend amzn.to/42RIiU0 You are going to need about 24 of these for a full size truck, it's the only thing we know that will stop and kill rust that won't be sticky. So as mad Mike always says "time to strap on your big boy pants and get to spraying". :) Thanks for watching, have a great day. mad Mike the hammer SPC

[@daver8298]

@@SweetProjectCars Perfect. Thanks!!

[@PopPopJoe]

What were you spraying on the door panel? They turned out great.

[@SweetProjectCars]

It's this amzn.to/3Rvwu30 it is a fantastic product PopPop! Thank you for watching and asking, hope you have a great day my friend. mad Mike the hammer SPC

[@FFSteve81]

No more Dawn Platinum or Transmission fluid? Also, thoughts on adding a "rust converting agent"?

[@SweetProjectCars]

Hello Steve, this is our "new & improved" rust killer concoction, Hoolio is always trying to improve his mixes with the best of the best products he finds. If you are looking to simply convert rust, just use this amzn.to/3Ed6u9p Hope this helps, thank you for watching and asking, have a great week my friend. mad Mike the hammer SPC

[@Bawkr]

What do you think about coating rust with automotive ceramic rust oleum spray paint, just to keep it sealed up until you can get in there and cut out and patch the sheet metal later on? Perhaps I should go in with some of this stuff as well and get it on there now that the paint has had a year to dry.

[@SweetProjectCars]

You need to do this video, it will stop the rust in it's tracks until you can get in there and get to it Nic. Thanks for watching and asking, have a great week and all the best on your project my friend. mad Mike the hammer SPC

[@ken48827]

I was looking for a way to remove rust before painting. Is this a rust converter?

[@SweetProjectCars]

Use this amzn.to/493eGWL to remove the rust before painting then do the process in the video. Hope this helps Ken, thanks for the view have a fantastic day. mad Mike

[@billy2bob63]

Hey Mike what do I need to use to clean the stainless steel on my pellet smoker? Please share!

[@SteeringWheelOperator]

Magic Eraser

[@domvolpe1977]

Barkeepers friend might work.

[@SweetProjectCars]

Kerry use this amzn.to/3uzQ2Ip to clean the initial smoke residue, then use this amzn.to/3TeiZ9a afterwards. Thank you for watching and asking, we appreciate you my friend, have a great week. mad Mike the hammer SPC

[@billy2bob63]

@@SweetProjectCars Thank you Mike/aka the hammer 🔨

[@MyGuyKirby]

Does this solution harden from what we see now or drips down and self levels?

[@SweetProjectCars]

It dries perfectly thom! Thank you for watching, have a great day my friend. mad Mike the hammer SPC

[@beanieweenie9543]

Do you have a Amazon store set up with all your recommendations?

[@SweetProjectCars]

No, but we do include links for ease of ordering the products/tools we use in our videos Beanie. Thank you for watching, we really appreciate it, have a great day my friend. mad Mike the hammer SPC

[@carlbrooks90]

The rocker panels are rusting from the inside out on my 02 IS300, and currently don't have the money to get it fix, any suggestions to slow or kill it until I get it to a body shop?

[@SweetProjectCars]

You need this amzn.to/3BVSqOW with this amzn.to/3CpIBsL and get busy my friend. Thank you for watching and asking, have a great week and all the best on your project, you can do it! mad Mike the hammer SPC

[@carlbrooks90]

Thanks for the reply

[@silvergrizzly316]

Sweeeeeeeeeet!!! Kinda looked like Hoolio morning after taco Tuesday🤠🤣 HEY👋Mike the HAMMER, well we survived another hurricane, thank God. You must be marketing Michigan🙄"toto not in Kansas anymore"🤣🤣 AWESOME concoction ya whipped up there Dr. Frankenstein😂🤣. Anywho, much love from NC my friends!!! Until next invention, take care and God Bless!!! ~Jay~

[@SweetProjectCars]

LOL, thanks Jay! We did indeed dodge Ian, we were out of town and had to turn around and come back home because at that time they were still calling a hit somewhere in the panhandle :( They are nothing to play with for sure. Thanks for always being here with us we appreciate you buddy, have a blessed week. mad Mike the hammer SPC

[@DaRougaroux1]

Now wait, I thought the Auto Transmission Fluid was the best rust inhibitor. Im getting ready to rust proof my truck here for the Washington State Winter, I spread Marine Axel Grease on the frame but im gonna spray something on the bolts and leaf springs. I was going to use your spray made with Blaster, Dawn and ATF. So, which one do I use now?

[@SweetProjectCars]

Either works great my friend! We just found something that works a little better, remember, we are always trying and testing the newest products and tools to share with our viewers. Thanks for watching and asking, hope you have a great week and all the best on your project my friend. mad Mike

[@DaRougaroux1]

@@SweetProjectCars Thx, just needed clarification. One other question: I saw a dude take a 1 gallon sprayer, well hes a farmer, and he mixed used motor oil and diesel and used that bug sprayer to spray all under his farm truck. The bottom of his truck is Black, i mean black with that stuff, but all of it is coated. What do you think of his "protection plan"?

[@kylemlm]

Julio...is the best...

[@SweetProjectCars]

He's a keeper Kyle! Thanks for watching and sharing my friend, hope you have a fantastic week. mad Mike the hammer SPC

[@S4_QUATTROPOWER]

Can you make something to clean glass top stoves I clean mine but when turning on this this nasty burnt smell, thanks.

[@SweetProjectCars]

We use this amzn.to/3gkj1xY no smells :) Thank you for watching and asking, have a great day. mad Mike the hammer SPC

[@jaxszeszko5291]

What if I already have rust will this stop it and prevent more from forming

[@SweetProjectCars]

You got it Jax, hence the title of the video :) Thank you for watching, have a great week. mad Mike the hammer SPC

[@vicc6744]

wHAT WAS THE CLEANER YOU USED ON THE BLACK BUMPERS?

[@omarkhshi3442]

Do you rinse this off after the winter over or leave it ?

[@SweetProjectCars]

You don't need to do a thing, just leave it on, it will eventually rinse off and you will need to re-apply it before your next winter my friend. Thanks for watching and asking, hope you have a great week. mad Mike & team

[@WatchRichRebuildsChannel]

So does it stay wet or does it dry? (Rust stuff)

[@SweetProjectCars]

It soaks into the metal and rust and everything it gets sprayed on then dries and protects as shown my friend. Thank you for watching and asking, have a fantastic week. mad Mike the hammer SPC

[@JB-fn7ky]

Brother Mike, greetings from the rust belt! I’ve watched this repeatedly and am squeamish, my application would be spraying in rocker panels and my hood. Is there an impact to paint? Mucho grassy, JB

[@SweetProjectCars]

Absolutely not, it doesn't affect your painted surfaces at all JB! Thank you for watching, have a fantastic day and all the best on your project my friend. mad Mike the hammer SPC

[@robmullan4395]

So.....wtf is the ingredients so i can make it at home?

[@samtx5518]

Man I’m so glad I live in Texas…! Howdy Mike

[@SweetProjectCars]

Florida is pretty sweeeeet too Sam :) Howdy neighbor, we appreciate the view and comment from the Lone Star State!! Have a great week my friend. mad Mike the hammer SPC

[@JLAGAN49]

Hey help us out in the UK please. We don't have PB blaster available to us from Amazon UK. We assume '40 ' means WD 40, but what is the actual brown gloop? We don't have a clue over here in Englandia 😭😭😭😭

[@SweetProjectCars]

It's this amzn.to/3Cr6FNi If you are in another country other than the US, if you click on the links provided in the ....more of the video description, it will give you the comparable product available to you Joe. Hope this helps my friend, we really appreciate you being here with us from England, have a great week my friend. mad Mike the hammer SPC

[@oldmaninavan3592]

So the FF needs to warm up to become viscous, can we heat it up another way other than leaving it in the sun?

[@SweetProjectCars]

You can make sure it's sealed up completely then take it into a warm room that's around 70 degrees, that should do it my friend. Thanks for watching, have a great day. mad Mike the hammer SPC

[@igorpotocnik7231]

Put it on radiator or in hot bath or if you're cheap like me put it under your clothes on your belly (e.g. I use this method to liquefy neem oil).

[@theoracle5265]

Where do you get blaster from and all the other ingredents?

[@SweetProjectCars]

Here they are amzn.to/3Rtu4lp ; amzn.to/3C048bi & amzn.to/3Cr6FNi and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@theoracle5265]

Thank you mad Mike!

[@johncooke1386]

I must have missed something because I did not hear what the gooey stuff was. I figured out what pb was and 40 but that’s where I got lost. John😢

[@SweetProjectCars]

As stated in the video by Hoolio, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@christopherconner9014]

Could I coat the inside of my air compressor tank with this stuff?

[@SweetProjectCars]

Here's the problem putting anything with oil in it inside your air compressor, you'll never be able to spray any paint with it, the oil will always be in there. Your best bet, depending on the size of your air compressor, is to use this amzn.to/3VcWBPj Remove your pressure sensor and plug the hole with the appropriate pipe fitting, make sure your compressor is completely dry inside, pour the suggested product into your air compressor, plug all other holes after applying. Then rotate the compressor so that the inside gets coated the best you can, when you feel it's completely coated inside, open the bottom plug of the compressor and let the excess product drain out. Unplug everything else and let it dry for 1 week. Then clean the threads and re-assemble the compressor, this is a very tedious process but it works christopher. Thank you for watching, have a great week. mad Mike the hammer SPC

[@firstmkb]

Plus, at some point oil vapors and compressed air become a Diesel engine. I don’t know that this would happen, but you would have a very bad day if it did.

[@jameymoore8000]

My drip rails on my 89 GMC g2500 have cancer everywhere I've looked to repair it they want 2500 or more which I don't have so after I removed the same sealer and removed as much rest as I possibly could I'm finding out that I need to weld in different areas which I'm not a welder by far so my question to you is could I use JB weld in those areas

[@SweetProjectCars]

You can use that, but before you do, make sure you spray it all down with this amzn.to/3JtzWdW Hope this helps Jamey, sorry for the delay in responding, have a great week and thanks for watching and asking. mad Mike the hammer SPC

[@SlowGoat54]

How does this compare to the acetone/ATF potion?

[@SweetProjectCars]

This is updated and uses the best of the best products that we have found. We are always looking to improve our methods Ludicrous. Thank you for watching, hope you have a great day my friend. mad Mike the hammer SPC

[@mwpahl38]

Bear in mind, Fluid Film has a very certain aroma that hopefully you will come to appreciate with time..

[@SweetProjectCars]

We have found that the benefits far out weigh the odor which doesn't last that long. Thanks for watching, have a great day my friend. mad Mike the hammer SPC

[@detailingbyjesse]

Do you have anything for an iron remover, for detailing?

[@SweetProjectCars]

Please let us know where iron is an issue, water spots? There are a lot of spots iron could be, please go into detail and we will get you pointed in the right direction Jesse. Thank you for watching, have a great week my friend. mad Mike the hammer SPC

[@detailingbyjesse]

@@SweetProjectCars Iron from the rotors sticks to the paint and glass on vehicles. It's noticeable on white and light colors. Iron remover is $80+ a gallon. Meguiars makes a really good one. Just wondering if it's easy to make at home.

[@SweetProjectCars]

Watch this kzbin.info/www/bejne/gHK7lHurn69lbtU it will get you pointed in the right direction Jesse. Thanks again for watching, hope this helps, have a great day. mad Mike the hammer SPC

[@UnitedWeStand2020]

I'm guessing that this stuff is only applied to metal you don't plan on painting. True or false?

[@billy2bob63]

True

[@SweetProjectCars]

Yes, if you are going to paint it, use this amzn.to/3yzqWOc Thank you for watching and asking, have a fantastic weekend my friend. mad Mike the hammer SPC

[@precisiont5188]

What did you use for the shine?

[@SweetProjectCars]

It's this amzn.to/3Rvwu30 but you've got to watch these clear Coat Videos Plastic kzbin.info/www/bejne/oZClg2SFpbmgock Bumper kzbin.info/www/bejne/kHTbfGaNd92so7c they are full of helpful information about using the product, you will love the results, it's the best we've found. Thanks for watching and asking, have a great weekend. mad Mike the hammer SPC

[@donpratt9872]

Can yu make it black in Color

[@SweetProjectCars]

If you want black you have to use this amzn.to/47dAyNB you can spray it on or brush it on. Thanks for watching and asking, have a fantastic day my friend. mad Mike & team

[@johnsn10]

How would you know if you had a leak bc everything always looks wet

[@SweetProjectCars]

This mix dries over time, you will definitely know you have a leak by looking at your driveway or garage floor my friend. Thanks for watching, have a great day. mad Mike the hammer SPC

[@jenniferflores3360]

Can I use this on my car doors?

[@SweetProjectCars]

Absolutely, you can use it anywhere on your car that you don't want rust. Thanks for watching Jennifer, have a great day. mad Mike the hammer SPC

[@jenniferflores3360]

@@SweetProjectCars wow, thanks Mike

[@jasonchristopher2977]

Use his video of heating up Vaseline, or using mineral oil etc to put in doors. Tape off drains and leave for a week. Then drain out and save for next year.

[@scotttichnell9451]

What r the actual names of ingredients and where do you buy them?

[@SweetProjectCars]

These #1. amzn.to/3Cr6FNi #2. amzn.to/3C048bi #3. amzn.to/3Rtu4lp and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Scott. mad Mike the hammer SPC

[@onlyme8870]

How about for the Land Rover Discovery 2 SALT Vin Frame will this revive it

[@SweetProjectCars]

This works on all makes, models, years etc. of vehicle. Thanks for watching. mad Mike the hammer SPC

[@onlyme8870]

@Sweet Project Cars I only asked as these Frames are notorious for their rot chassis. For 8 years I used zfluid zfilm annually and prevent any rust. But blew my shoulder and now it's getting eaten bad. So wanted to stop it and quoted I had were like 5000 bucks so this would be a major win thx for sharing.

[@theoracle5265]

That brown stuff looks like "Brown 25" from the movie groove tube

[@SweetProjectCars]

LOL It's this amzn.to/3Cr6FNi Thanks for the view and comment, hope you have a great day my friend. mad Mike the hammer SPC

[@lanceroberthough1275]

Firearms use?

[@SweetProjectCars]

Hello Robert if you’re looking for something for your firearms go here tinyurl.com/bdf6a6ky The stuff in the red bottles is weapons grade stuff and it’s awesome you can even call the company and talk to the owner one of the best lubricants and Rust preventatives we’ve ever seen in our lives have a great day and happy new year

[@Zodchiy87]

please tell me what a blaster is? second, what is a viscous substance?

[@SweetProjectCars]

It's this amzn.to/3C048bi and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike P.S. A viscous liquid is thick and sticky and does not flow easily.

[@Zodchiy87]

@@SweetProjectCars Components? What does the blaster consist of? You call it, which is diesel fuel in your video?

[@PopPopJoe]

I see you have 2 videos out on stopping rust. The first one is from above a year ago. The one you mixed Blaster, Auto transmission fluid, and dawn soap. Which one do you recommend now?

[@SweetProjectCars]

We recommend the one in this new and updated video PopPop, we are always looking for better ways/products because as you know companies are constantly using technology to improve products/tools. Thanks for watching and asking. mad Mike the hammer SPC

[@croynd]

Where to buy the thick brown ingredient.

[@SweetProjectCars]

It's this amzn.to/3Cr6FNi and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike

[@sherlockhomesky]

What is the thick stuff?

[@SweetProjectCars]

It's this amzn.to/3Cr6FNi and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@brianplevelich7032]

What do u use ?

[@SweetProjectCars]

Hello brian, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@dangerdavefreestyle]

makes me want to get a garden sprayer pump jug and hose the shit out of my undercarriage ghostbusters style. up in the northeast here!

[@SweetProjectCars]

LOL, go get em! Thanks for watching Dave, have a fantastic day my friend. mad Mike the hammer SPC

[@stuartb9323]

Awesome 👌

[@SweetProjectCars]

Glad you liked it Stuart! Thank you for the view and comment, we really appreciate it, have a great week my friend. mad Mike the hammer SPC

[@dangerdavefreestyle]

does the addition of the blaster and the 40 thin out the fluid film? is that the purpose or to make it go farther? i use fluid film on my bolts AFTER torquing them DRY because it will not seep into the threads and affect torque values. and someday when i want to get the bolts off they will actually come off. however, fluid film comes out of the spray can like a paste and i have to use a paint brush to apply it evenly!

[@SweetProjectCars]

The purpose for this mix is so that not only do you get the two other great rust inhibitors added to the film, but it also makes it usable in these amzn.to/3FzDoiL for ease of application. Thanks for the view and question my friend, have a great day. mad Mike the hammer SPC

[@KRay-fb2vf]

I live in Illinois and have a rusty frame Ford Ranger but did not see you treat a rusty area. Plus the video did not show the labels on the bottles so I could re-create the spray. I know you know how to solve car and truck problems that's why I come here. Please make it easy for us to take your advise.

[@kcbeerslinger]

Just click on the area below the video that says "more" and that gives you links to Amazon where you can purchase the products. also check his other videos about the Dawn soap and transmission fluid rust mixture too. A lot cheaper. Click on his picture ( the round circle) and it will take you to his site.

[@SweetProjectCars]

Ingredients #1. amzn.to/3Cr6FNi #2. amzn.to/3C048bi #3. amzn.to/3Rtu4lp and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching K Ray. mad Mike the hammer SPC

[@andrewkillen677]

Ok so what was in the other bottle that came out like a bad night at a Mexican cincera party?

[@billy2bob63]

What hullo ate at taco bell LMFAO

[@SweetProjectCars]

LOL, it's this amzn.to/3Cr6FNi Thank you for watching andrew, and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. mad Mike the hammer SPC

[@Jeff-wh1ky]

Fiberwise... that's a new way to use it...

[@SweetProjectCars]

LOL, I know! Thanks for watching and commenting, have a great week Jeff. mad Mike the hammer SPC

[@Beehashe]

Crème de la plop!

[@SweetProjectCars]

LOL, it is!! Thanks for watching Ben, we appreciate it, hope you have a stupendous week my friend. mad Mike the hammer SPC

[@Beehashe]

@@SweetProjectCars thanks for all the great content! Hope that storm stayed away from you and yours!

[@FasterBastard1]

My truck has an automatic ATF oiling system lol

[@SweetProjectCars]

LOL that's good and bad :) Thanks for watching my friend, we appreciate the view and comment, hope you have a great day. mad Mike & team

[@jerbear7952]

I wish someone would have talked you out of the "Sweeeeeet thing" as well as the Julio thing. Other than that it's a great channel.

[@SweetProjectCars]

Thanks for watching, have a great day. mad Mike & team

[@satberhoxhaj3347]

thats called White Castle

[@paulbaker5085]

Please explain the ingredients better . Blaster ? 40 Whats this. Maybe Im not the the sharpest knife in the rack but I would like to know what the ingredients are .

[@SweetProjectCars]

As stated in the video by Hoolio, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@troyladoux1953]

Does this supersede your video called, "How To Make Your Own RUST KILLER.... STOP RUST FAST! BoomZilla Video Series #4"?

[@SweetProjectCars]

Troy, we are constantly testing and trying new products/tools they all work, we are just sharing what we know works best of all of the options. Thanks for watching and asking, have a great week my friend. mad Mike

[@giovannid1457]

Florida rust is nothing. How will it work in NE Ohio against salt snow and ice.

[@SweetProjectCars]

This is a concoction that we used having lived in Michigan our whole lives, if it works there, it will work for you all in Ohio :) Thanks for watching Giovanni, have a great day. mad Mike the hammer SPC

[@binagarten4667]

Shine is not great at times!

[@SweetProjectCars]

Thanks for watching Bina, have a great day. mad Mike the hammer SPC

[@rickfm4109]

You didn’t mention wtf you were mixing?

[@SweetProjectCars]

Hello Rick, we don’t spend a lot of time in our videos explaining every single product/tool that we use as the video would be way too long and besides that, all of our great subscribers all know that they can always be found in the …more of the videos description, if you can’t find it let us know and we will be happy to help you since you asked so kindly. Have a great day. mad Mike the hammer SPC

[@silvergrizzly316]

@@SweetProjectCars gotta be from the UP, they don't get much sunshine up there.😠👀🤣👋Hammer

[@scottontheboat2340]

Still using the tranny , blaster , Dawn sauce

[@bauscustomdetailing8876]

Works really good

[@SweetProjectCars]

This is updated and uses the best of the best products that we have found Scott. We are always looking to improve our methods, Hoolio is the master at " new and improved ". Thank you for watching, hope you have a great day my friend. mad Mike the hammer SPC

[@scottontheboat2340]

@@SweetProjectCars I like the original because it runs but the new recipe has it's advantages

[@andrekondziolka4920]

ingredients?????? what is in it 20 ounces of rust proofer NAME OF RUST PROOFER???? 6 ounces of the 40??? what the hell does that mean??? very sad vid

[@SweetProjectCars]

Hello andre, this is it amzn.to/3Cr6FNi and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@BLACKRAIN390]

YOU DIDN'T DO A GOOD JOB ON WHAT TO USE....

[@ksw501]

Isn’t it listed in the description box?

[@channelview8854]

Well, sort of. You have to click on the links in the video description. I just did and every item is listed in it's own link. I'm assuming this system makes it more likely the viewer will purchase thru the link so he will get a small cut. Seems fair for good information. I was amazed you can get a full gallon of the "Film" for only 41 USD. I paid 11 for a spray can of that ten years ago to rust proof my guns. I worked for Bombardier Aerospace a few years ago on a UAV research project. Everybody at the project was ex Navy. My boss talked about that Film all the time, like the greatest stuff ever made.

[@Unbendable74]

You have to learn Spanish to understand Julio Caesar Chavez Rodriguez Clint Eastwood telling you where to get everything

[@SweetProjectCars]

As stated in the video by Hoolio, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@BLACKRAIN390]

@@SweetProjectCars Okay 👍✌

[@tigeryorkie07]

Looks like fudge ice cream🤷.... 🤣🤣

[@SweetProjectCars]

LOL, something like that Mike! :) Thank you for watching and commenting, hope you have a great week my friend. mad Mike the hammer SPC

[@tigeryorkie07]

@@SweetProjectCars no worries. Yeah, we actually live in the same town and when I showed a coworker one of your videos, he said he remembered meeting you at the harley shop, back when we both worked there together. I told him I've seen your bike in the background of a few of your videos. Maybe we can meet up one day. 🤘

[@SweetProjectCars]

Awesome!! Do you have a scoot? If so, check out our motorcycle channel kzbin.info maybe we can go for a ride sometime! Thanks again for the view and comment, take care my friend. mad Mike the hammer SPC