How To Make Your Own RUST KILLER.... STOP RUST FAST! BoomZilla Video Series #4

[@SweetProjectCars]

Hello to all of our Great Subscribers!! *** Here is another restoration video on BoomZilla. Make sure you are always checking the new videos that are coming out. This rust stop mix will blow your mind we promise that. ***ALSO, DONT FORGET OUR SWEET SUNDAY REVIEWS ARE COMING BACK TOMORROW! Quote of the Day: If we did all the things we are capable of doing, we would literally astound ourselves.*** Thomas E,

[@swm122758]

Have you tried this with a garden sprayer? I'm thinking of the added reach and angled sprayer tip..?

[@filmmaker1films374]

Hi I live in Pensacola fl on barancas next to the golf course where y’all shop located so I can get my vehicle cerimic coated message me plz . 19 Audi A4

[@muppetmorales8436]

Yeah keep this good stuff coming my man great job

[@SweetProjectCars]

Thank you very much my friend! We appreciate your view and comment. Hope you have a great evening. mad Mike the hammer SPC

[@icanfartloud]

@@SweetProjectCars You didn't show the "after".....disappointing

[@gatornation3889]

Transmission fluid also is great on wood trailer boards. I learned this trick from a national park ranger. Spray the wood with a mix of diesel fuel and transmission fluid, let it dry for a few days and boom, wood is basically sealed and will last for years

[@SweetProjectCars]

Thank you for watching and sharing my friend! Hope you have a great day. mad Mike the hammer SPC

[@pearlperlitavenegas2023]

Does it add color?

[@louisetrimble3490]

,another amazing wood preserver/ hardener is the toxic (pink)kind of antifreeze. It actually bonds wuth the wood fibers.

[@pamparker4047]

What the ratio?

[@feetfats1]

I've used motor oil with good results

[@Sheeeeeeeeeeeeiiitt]

Started with the AC video, worked over to the leather cleaning, watched the boom truck operation and now on rust prevention….it’s become evident that this channel has everything but the kitchen sink. Swiss pocketknife of KZbin diy and resourcefulness. Thank you!

[@SweetProjectCars]

Glad to help JP! Thank you for watching, we truly appreciate it my friend. Have a fantastic weekend. mad Mike the hammer SPC

[@SocialScrapper]

LOL Me Too!!!!!

[@lonnysaucerman1711]

What exactly are you calling blaster?

[@deawallace3584]

So you must enjoy advertisements. This is an ad for his mystery blaster.

[@ronaho8940]

Just want to thank you again,watched your video a year ago,and put it on my rusty tundra frame that was almost recalled,but the dealer sprayed it instead.dealer did a horrible job and it fell off a year later.i love that combination of fluids 😅and it works good has stop the rust from spreading and the wicking is unbelievable,spayed it on one spot in middle of frame came back a day later and was wrapped from top to bottom.im so glad you posted this video keep it up I’ll be watching for new great ideas.2008 rusty tundra guy..

[@SweetProjectCars]

Glad we could help, rusty tundra guy :) LOL Thank you for watching and sharing your awesome results, we really appreciate it, hope you have a great week Ron. mad Mike the hammer SPC

[@mrgoodtimes05]

Dawn (most dish soap/liquid detergent) is a excellent surfactant. Makes the chemical wetter, tends to cover more area. We put soap in weed killer when spraying the pastures.

[@SweetProjectCars]

Yes it's good, thanks for sharing and watching mr good times :) Hope you have a great day. mad Mike the hammer SPC

[@seeer3240]

Spraying poison in pastures?? Where our food animals eat? Please explain why that is a healthy smart idea? I must be missing something? Do you work for Monsanto?

[@mrgoodtimes05]

@@seeer3240 it's called 2-4-D look it up. And I'm pretty sure your animals don't eat on these pastures.

[@raytycker1656]

@@seeer3240 If you do not kill weeds on pasture land the weeds kill out the grass. The live stock cannot eat some types of weeds so they will have less food to eat each year.

[@Choober65]

If it's a SPC video, you can stake your life whatever it is about, it WORKS. PERIOD. I've used a lot of ideas from this channel and never been let down.

[@SweetProjectCars]

Thank you so much Irish Viking! We truly appreciate the view and comment my friend, comments like yours make all we do worth it! Thanks again, have a fantastic rest of your week. mad Mike the hammer SPC & team

[@enriquemejia6697]

Hey Jerry! Made your rust killer formula on my 68 El Camino that's been sitting at the beach for about 25years. This stuff kicks ass, and will trim a lot of hours off the restoration of my 1968 El Camino restoration. Geezers like me appreciate your great tricks you share with us!!!

[@SweetProjectCars]

Glad we could help Enrique!!! That is great to hear! Thank you for watching and sharing your stupendous results, hope you have a sweeeeet week and a Happy Thanksgiving my friend. mad Mike & team

[@SweetProjectCars]

Glad we could help Enrique!! Thank you so much for watching and sharing your stupendous results, hope you have a sweeeeet week and a Happy Thanksgiving my friend. mad Mike & team

[@beauglenn2204]

What is blaster?

[@richardworks481]

Pb blaster

[@gerrykeane4532]

How did you figure out the blaster formula it seems to be a mystery

[@josephpuchel6497]

Hello You are correct transmission fluid mist definitely stops rust even before it starts. Bought a 89 K5 Blazer. The rear trans seal had a slight leak and coated the underneath of the blazer which were areas that they rusted out. Due to this leak when I purchased it I found truck was preserved No Rust. Excellent video

[@SweetProjectCars]

Nice!! Thank you for watching and sharing Joseph, we appreciate it. Have a great day. mad Mike the hammer SPC

[@trollbane66]

I have used just ATF for years on bare metal. I have never found anything better. I never thought of adding PB Blaster and Dawn to it, but I am definitely going to try it.

[@SweetProjectCars]

You will love it Hubba! :) Thanks for watching and sharing, hope you have a fantastic day my friend. mad Mike the hammer SPC

[@pierrejoly9094]

@@SweetProjectCars hello, just found your video on the rust killer, I was wondering what is the product you use (4on of the yellows stuff), we live in Canada and rust is part of our live, too much salt on the winter icy roads to make our lives better but hell for our cars and trucks. Thank you very much.

[@russellstewart5414]

@@pierrejoly9094 PB Blaster. Ne’er to find it in a bulk container not the little spray cans

[@Jeff_Seely]

WTF? I'm genuinely impressed! I've used ATF and acetone mixed in equal parts before to free up bolts and it dissolves the hell out of rust! So I believe that it does work. It's the soap component that has got me blown away. I have to give this stuff a try.

[@SweetProjectCars]

You will love it, Jeff! Thank you for watching and sharing, we really appreciate it, have a great week my friend. mad Mike the hammer SPC

[@zenombereznicki]

I agree, it's a great rusted bolt buster

[@jimjones2086]

Dawn is also the best glass cleaner you will ever use. Mix up a bit in a bucket, like you are washing dishes. Dunk a terrycloth towel in the bucket. Ring it out. Clean your glass with your damp terry towel. Dry and buff with a soft microfiber towel... Scary clean.

[@SweetProjectCars]

Thanks for sharing and watching Jim. Have a great day. mad Mike the hammer SPC

[@waterloo123100]

Palmolive is better on glass then dawn and it’s cheaper.

[@justinpennington7682]

I use motor oil

[@nealhead7673]

@@waterloo123100 Madge ,also, has been recommending it for years because it keeps your hands looking young. 😁 "you're soaking in it "

[@jdisdetermined]

"Sippin' cyanide and Kool-Aid with Jim Jones." 😎✌ I like CarPro Eraser and a squeegee for glass. 👍

[@silverfox-59]

What is your Blaster?

[@rujimbob]

Blaster PB PENETRATING Catalyst

[@jackjones9460]

@@rujimbobThank You!

[@ml414skidoo]

Blaster PB PENETRATING Catalyst 1GAL

[@VinceTomJones]

Shhh donlt ask what that is... shhh It;s a secret ...

[@sean4586]

You are a genius! I used to work on a golf course and when we needed to keep moisture on the greens we would add Dawn to the sprayer. It would bind the water molecules to the plant. Thanks again!

[@SweetProjectCars]

Glad it was helpful Sean! Thank you so much for watching and sharing, we really appreciate it. Hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@solarsynapse]

Interesting. Usually soap will kill plants in the sun.

[@lowspeed2000]

I don't get it, water is bad for metal

[@Mooseracks]

The frame on my toyota tacoma was supposed to be replaced...based on Vin and recall notice... When the dealership inspection was completed, the said my frame wash n perfect shape and does not need replacing... Oh, and they asked " who applied the undercoating " I did it myself with a secret formula

[@SweetProjectCars]

That is sweeeeeeet Mooseracks!! Great work my friend! Thank you for watching and sharing your results, hope you have a fantastic day. mad Mike

[@edwardsj0]

I used this on my f150 2013 on the rusty spots on the frame. It looks great and I think it’s going to be very worth while.

[@SweetProjectCars]

Awesome Jimmy! Glad we could help, thank you for watching and sharing, we really appreciate it, have a great week my friend. mad Mike the hammer SPC

[@nabob14]

The dish soap works because it breaks the surface tension allowing the fluid to lay flat and not bead up... works for almost anything you want to spray for coverage... even homemade herbicides like vinegar and salt... add dish soap and it keeps the solution from 'beading up'

[@SweetProjectCars]

Thanks for the info! Hope you have a great day! mad Mike the hammer SPC

[@mikeyd717]

It's like flux for solder. Break the tension and allow it to pool

[@Leatherstockingfella]

Surfactant

[@whatsit2ya247]

​@@Leatherstockingfella that's what she said 😅

[@moonolyth]

Great information for us welders and wood workers too!!! So happy you are sharing secret formula. I have many wood tools this should work just as a wipe-on. I also have lots of scrap metal I keep for projects. Really great!

[@SweetProjectCars]

Glad to help! Thank you for watching and sharing, we really appreciate it, have a fantastic day my friend. mad Mike the hammer SPC

[@markallison8108]

I can vouch for the power of ATF because my old Mustang had a transmission leak on the right side and it would run down and get on the bottom of the floor pans. And those floor pans still look like new where the ATF sat on them and soaked in.

[@SweetProjectCars]

Nice! Thanks for watching and sharing Mark, we really appreciate it. Have a great day. mad Mike the hammer SPC

[@josepeixoto3384]

Any kind of oil mixed with the road dirt will prevent rust well; cars that have engine oil leaks never rust on that side, or on all sides if it's the oil pan gasket,had a Camaro like that, needed half a quart every 300 miles.

[@drizler]

I had same thing with an old 1990 K 2500 GMC . Had tiny rust through on a tranny plug . It just let a tiny mist flow back making me add a quart every couple months. I got it in 2005+- and it had been like that a while prior surely. From the leak area back it looked like it just rolled off the assembly line ! This is in Northern NY salt mine Rustbelt. The paint was perfect ! ATF is the greatest even on rusty old cars and mixed 50/50 with Acetone it’s all I’ve used for 20 years on rusty bolts. Keep it in an old spray bottle hanging on the shelf it’s better than commercial stuff nd almost free👍🏻

[@JasonTylerRicci]

Fluid Film is my go-to. Problem is, it's just so darn expensive for how little you get. And it can take a few cans to do a whole vehicle. Could easily run you $30+ to do the job. Your alternative seems more cost effective. Thanks for sharing

[@rolfbjorn9937]

Buy the gallon.

[@SweetProjectCars]

Totally agree! Thank you for watching and sharing, we really appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC

[@jeanine0125]

I missed the 3rd ingredient..I got tranny fluid and dawn. What was the 1st?

[@Note10plusAura]

​@@jeanine0125He said "Blaster" ..I assume PB Blaster?

[@jeanine0125]

@@Note10plusAura Thank you. Lol

[@wildbillhackett]

Finally, a cure for car cancer. Your Nobel prize money is in the mail.

[@SweetProjectCars]

Thank you very much Will, we will be watching out for it LOL :) Thank you for the view my friend. Hope you have a fantastic day. mad Mike the hammer SPC

[@OOICU812]

More like car cancer 'treatment'.

[@VinceTomJones]

But wait..the "blaster" is a secret... shhh

[@Donna777]

Thanks for the great tip! I have a bit of rust under the fuel door of my car. I'm going to do this before it gets any worse!

[@SweetProjectCars]

Absolutely Donna! Thank you for watching and sharing, we truly appreciate it. Hope your day is the best! mad Mike the hammer SPC

[@captainmorgan6035]

If you want that spot to last longer without rusting more you need to sand it primer and paint it, or you can use whats on the video but you will have to reapply probably every couple Weeks or months depending on how much it rains I suppose

[@exibuchay1695]

When I was a kid somebody told me how they did it back then. Way back then. They would use a sprayer and spray the entire under carriage with transmission fluid. And then drive down a Dusty Clay Road. Really fast. And that would coat all of the transmission fluid and hold it in place. Poorman rustproofing right there

[@SweetProjectCars]

Thank you for watching and sharing, have a great day. mad Mike the hammer SPC

[@Leonardokite]

My old Toyota truck needs a little bit of this tender love. Sounds like a great project for once the snow melts and warms up a bit. Of course you don't know what snow is anymore. Old memories LOL

[@SweetProjectCars]

Sounds great! And I gotta tell you Leonard, I will never miss that snow :) Those are old memories and we are thankful for that :) Have a great day. mad Mike the hammer SPC

[@williamcharles9480]

I used to work on those Altec boom trucks for the Jacksonville Electric Authority. They're quite an interesting and well designed piece of equipment, it should serve its ownership well if maintained properly. SPC: Thanks for another video that shows us how to make life a little easier and our battle against rust more easily accomplished.

[@SweetProjectCars]

It's our pleasure William! Thank you so much for watching and sharing your interesting info, we appreciate it my friend. Have a great day. mad Mike the hammer SPC

[@JimmySmith-xu5ot]

What is

[@JimmySmith-xu5ot]

What did you say the orange one is n Smith 🇺🇸

[@1232bluejays]

Used your trick of baby oil covered by garbage bag for floor pans. This looks good too. Say hola to Julio for me

[@SweetProjectCars]

Will do dave! Thanks for watching and sharing, we truly appreciate it my friend! Hope you have a stupendous day. mad Mike the hammer SPC

[@BourneAccident]

I was on the edge of my seat during this video. I don't think he was aware that a rattlesnake was about ready to pounce on him. Whew!

[@SweetProjectCars]

LOL, he's my desk buddy!! Thanks for watching and sharing, have a great week my friend. mad Mike

[@BourneAccident]

How did you know my name?@@SweetProjectCars

[@shawnmckenzie1786]

Thank you again for being amazing. Hope all is going well for you and your family.

[@SweetProjectCars]

Thank you very much Shawn, we truly appreciate it my friend. Hoping all is well with you and yours also, have a great evening. mad Mike the hammer SPC

[@rev.w.santos2764]

Yes, I've been using ATF for years on rust! Works well on all rust....

[@SweetProjectCars]

Great to hear! Thank you for watching and sharing my friend. Hope your day is the best. mad Mike the hammer SPC

[@stevel1475]

Using straight ATF, no mixing? How often do you reapply the ATF?

[@rev.w.santos2764]

Once a year!

[@jessicac1101]

Does the rust color go away? Or it stays

[@davidfuller764]

@@rev.w.santos2764 thanks!

[@jeffreykbevins7116]

I want to thank you for sharing this with us on how to make the rust killer . You all always have great content on your videos. I found you all back several months ago, but I had sort of lost touch with all till I just found this a few minutes ago . I will be watching for more videos, so you all be careful and stay safe and keep on working and being helpful to viewers out here. As always, Jeffrey !!!

[@SweetProjectCars]

We appreciate that Jeffrey! Thank you for watching and sharing, it makes all we do worth it when we have great viewers like you! Have a fantastic week my friend. mad Mike the hammer SPC

[@Robio1971]

I have been using ATF allot. I will try your trick out. I have also used chainsaw bar oil. I found the chainsaw bar oil to stick well.

[@SweetProjectCars]

Thanks for watching and sharing Robio! Hope you have a fantastic day my friend. mad Mike the hammer SPC

[@digitalbreakthroughs]

I have no need for this but just enjoy watching videos from people who know stuff. This was so interesting.

[@SweetProjectCars]

Thank you very much Peggy, we appreciate the view, hope you have a great week my friend. mad Mike the hammer SPC

[@kylemlm]

Mike, I wish I had this formula 30 years ago..Boat trailers showed the age. I was using Boeing T-9 and that stuff cost $$$. ..Thank you..

[@SweetProjectCars]

Thanks Kyle! Appreciate your view and comment! Hope your day is the best my friend. mad Mike the hammer SPC

[@TheSchmed]

I guess Julio no longer down by the school yard, now a chemist in the laboratory, way to go J !!!

[@SweetProjectCars]

LOL, nope, he's our mad scientist now :) Thanks for watching Paul, have a great weekend. mad Mike the hammer SPC

[@thelazyhandyman]

I heard something similar to this works well to loose rusty bolts. Use 50% real acetone and 50% ATF (automatic trans fluid)

[@SweetProjectCars]

Thank you for watching and sharing, we appreciate it my friend. Have a great day. mad Mike the hammer SPC

[@randydeskins9359]

It is great. Only thing is the acetone will evaporate if not in a sealed container. Best penetrating fluid that I have found.

[@ericberg7364]

You can be sure I will be doing this to my daily driver 12yrs old & 66000 miles . On and off road in Wisconsin, still a solid 4×4

[@SweetProjectCars]

You'll be glad you did Eric! Thank you for watching and sharing, hope you have a great weekend. mad Mike the hammer SPC

[@ronbell802]

My daily driver is 20 yes old over 400thousand miles doesn't use oil still going strong

[@brickbreaker9581]

SPCs always has great DIY videos. I truly appreciate your videos sir !!!

[@SweetProjectCars]

So nice of you, thank you very much, we truly appreciate it my friend. Thanks for watching. Hope your day is fantastic. mad Mike the hammer SPC

[@billyetris]

😊😊¼0@😊SweetProjectCars

[@JCoova87]

This channel has to be the best for those that like to DIY great stuff

[@SweetProjectCars]

Glad you think so! Thank you so much for watching and commenting, hope you have a great week my friend. mad Mike & team

[@donjohnson3701]

Great info. I plan to make up a batch and use on the inside of my van’s door panels. I use dawn for removing grease before painting and it’s good for washing your greasy hands after working on the car (use something like cornhuskers lotion afterward because it will dry out your hands)

[@SweetProjectCars]

Sounds great! We're with you on the dawn, we do the same thing to wash hands after dirty work! Thank you for watching and sharing Don, hope you have a great week my friend and all the best on your project. mad Mike the hammer SPC

[@Susan70003]

What's in that Corn Huskers Lotion? I put some of that on my hands right before I went to pick up my little grandson. He slipped right through my hands. I didn't have him that far off the floor yet as I went to lift him so he wasn't hurt but I was shocked that the huskers left my skin with no grip ability. That was the first and the last time I ever used Corn Huskers. Scary stuff.

[@ethan-youtubetips5420]

You got me hooked for the whole video. When is it coming out? Thumbs up 👍

[@SweetProjectCars]

Our videos are posted every Saturday, so stay tuned my friend! Thank you for watching, we appreciate it. Hope you have a fantastic day. mad Mike the hammer SPC

[@brianbond8669]

THANK YOU, THANK YOU, THANK YOU!!! Gonna try this on my '76 El Camino.

[@SweetProjectCars]

You're welcome Brian! You will love the results my friend. Have a fantastic day. mad Mike the hammer SPC

[@beniesenobs]

Me too I'll definitely do this on my 96 Ford Bronco, thank you very much Sir for sharing this on your KZbin ....

[@Rick-O-Shay60]

I can see how this mixture would be good at stopping rust, although I would Never use this concoction on anything I wanted to paint. Even if you could pressure wash off, there are bound to be areas that if this were not completely removed, your paint would not adhere to the surface.

[@SweetProjectCars]

That's why you paint first, Rickey! Thanks for watching, have a great day. mad Mike the hammer SPC

[@whatsit2ya247]

And why is that Rickey? Most automotive paint is oil based, I know you wouldn't want wd40 anywhere near but I'm not sure about pb blaster.

[@michaeljohnson4204]

Dawn has glycerine in it which causes it to stick. Check out using chain bar oil for the same thing, that is put on with a brush or squirted. Also Dot 5 Brake fluid has a rust inhibitor it is silicone-based as does all modern brake fluid collects the moisture in the air and keeps it away from metals.

[@SweetProjectCars]

Thank you for watching and sharing Michael, have a great day. mad Mike the hammer SPC

[@tamaica7770]

But brake fluid is flammable though.

[@TheGuruStud]

@@tamaica7770 and damaging to nonmetals like rubber/plastic

[@wonl2]

Thanks for the great video!! I have just one question: What is this thing called Blaster? Sorry, wrong question. My real question is: Is this spray just for surface rust? Ok one more question: Should the rusty area be hit with a wire brush to remove scale and/or paint bubbles to allow the fluid to reach all areas? Thanks in advance for your responses. Thanks for making great instructional videos!!

[@SweetProjectCars]

You answered your own question, perfectly, yes, it needs to be touching the rust, so a wire brush is an excellent way to remove those scales/bubbles. Thank you so much for watching, we appreciate it. Hope you have a great evening my friend. mad Mike the hammer SPC

[@bfelder8853]

I desperately needed this

[@SweetProjectCars]

Glad we could help! Thank you for the view and comment, we really appreciate it. Have a great day. mad Mike the hammer SPC

[@deankay4434]

I think the Sierra Club in Californication will have you shot on site! They are a little extreme about placing the object on 3 layers of 6 mil plastic, capturing and bagging twice, gooseneck the bags, mark “Hazardous Waste” and paying $180 per bag to have burned. Great stuff. I use rendered tallow with dawn and thin with boiled linseed oil. It’s organic!

[@SweetProjectCars]

CA is not for us, FL is the Freedom state :) Thank you for watching and sharing Dean, hope you have a fantastic day my friend. mad Mike the hammer SPC

[@deankay4434]

@@SweetProjectCars I am sure they will go bankrupt and ask the US to pay them our taxes! Shortly, I hope they slide into the sea, after we get all the good old steel vehicles out!! 😆

[@TrojanHorse1959]

Great video and tips, I can use this one for sure, thank you!

[@SweetProjectCars]

Glad it was helpful!

[@fieldlab4]

One of the best rust killers is MOLASSES. Takes time though, but never damages paint or metal.

[@SweetProjectCars]

You can use whatever you want to use, but the last thing I would want to use is something that's going to attract insects and ants. And btw, we have never had this mixture damage paint or metal after years and years of use. Thanks. mad Mike the hammer SPC

[@sodjacksonville]

a regular paint sprayer is a suitable applicator also. Just add the solution in where the paint would typically go.

[@SweetProjectCars]

Thanks for watching, have a great day. mad Mike

[@shannonbrooks8834]

Transmission fluid, acetone, 50 50 mix. The Dawn? Never thought of that. Helps the Rust Buster stick too the metal. Rock salt, dishwashing soap, sprayed on grass kills it. Cheaper than Weed Be Gone

[@SweetProjectCars]

Thank You for sharing my friend

[@subbernh5192]

Have used that with 30-45%acidic vinegar. Problem is the heavier weed (like poison ivy) come back because the roots don't get killed.

[@rburns562]

Landscaping tip. Add dawn to roundup. It will make it stick to anything you spray.

[@SweetProjectCars]

Thank you for watching and sharing Ron! Hope you have a great day. mad Mike the hammer SPC

[@Marcoosianism]

Roudup is an ecological and biological (including humans) poison. Please find an alternative.

[@timothyandrewnielsen]

@@Marcoosianism nah

[@channelview8854]

Roundup spray adjuvant based on ammonium sulfate will do more good. Even better in drought conditions or on more mature weeds.

[@snappyone]

Roundup is glycophosphate poison. Vinegar works better for weeds

[@scubbarookie]

Love your channel! Your always giving us some of the best advice I've ever heard of, and product advice as well! Thank you so much for keeping a good thing going!

[@SweetProjectCars]

Thanks so much! We really appreciate the view and kind comment my friend. Have a fantastic day. mad Mike the hammer SPC

[@oxyfee6486]

Mike I am tired of winter here in Canada ,it makes even simple tasks a pain.As i have said before I have painted Timberjack, Skyjacks,John Deere,Caterpillar.I wish I could be there to help you my friend,for all you have taught me it would be a honour.

[@SweetProjectCars]

Thank you so much David! We would welcome you here in Florida my friend. The sun is out and it's a beautiful day today :) Take care. mad Mike the hammer SPC

[@harimadhavan1712]

Great Mike. Take care and look after yourself and family etc in these difficult times.

[@SweetProjectCars]

Thanks, you too! All is well here at SPC, thank you for watching Hari! Hope you have a great day my friend. mad Mike the hammer SPC

[@mattjenkins2362]

Zep Acidic Toilet Bowl Cleaner quickly removes rust. Its powerful 10 percent Hydrochloric Acid gel formula enables the cleaner to dissolve the heaviest rust buildup. The thick gel clings to vertical surfaces. I am a Machinist with over 30 years experience and I am super picky, trust me buy a gallon of this for about $13 and you will never use anything else for removing rust again.

[@SweetProjectCars]

You can use whatever you want to use we are just sharing what we know works and is safe for both you and your vehicle. Have a great day. mad Mike

[@VladRonin]

That product safe for rubber and plastic ??? Thanks.

[@Bawkr]

Lol what I seriously thought you were missing part of a finger in a different video the other day. Got me.

[@SweetProjectCars]

LOL, no, I still have all of them in tact :) Thanks for watching Nic, we appreciate it, have a great week my friend. mad Mike the hammer SPC

[@racerrr2231]

WOW THANK YOU THIS IS SO FANTASTIC 💯🇬🇧

[@SweetProjectCars]

Glad you enjoyed it Racer! Thank you for watching and for your comment, we appreciate it. Hope you have a fantastic day. mad Mike the hammer SPC

[@Codyjames83]

I gotta get to my poor jeep I did the old school old oil trick on half and quit now I got a half rusty jeep but I can see this being way better definitely gotta try it

[@SweetProjectCars]

It really works great Cody! Thanks for the view and comment, have a fantastic week my friend. mad Mike & team

[@MIKEYSREVIEWS]

Goodbye Krown! Nice. Can't wait for the snow to melt.

[@SweetProjectCars]

Thank you for watching Mikey! Sorry about the snow :( Hope you have a great day. mad Mike the hammer SPC

[@speedy_pit_stop]

Nice recipe. I used half-half ATF and melted petroleum jelly for consistency. Will try yours too.

[@SweetProjectCars]

Thanks for watching and sharing, we appreciate it. Have a great day. mad Mike the hammer SPC

[@captainmorgan6035]

Anything that will keep the oxygen away from the metal will stop it from rusting keep that in mind oxygen is what makes the metal rust, if only we could wrap a Ziploc baggie Around our vehicles and suck all the oxygen out wouldn’t that be great

[@mikew5988]

Thanks for the tip. I'm always looking for a rust killer. Great video!!

[@SweetProjectCars]

You will love this mixture Mike! Thank you for watching, we truly appreciate it. Hope you have a great day. mad Mike the hammer SPC

[@ironhead9507]

I do something similar to clean up rusty chrome but I use vinegar and dawn and plenty of it so it sticks to things like wheels and valve covers ect.

[@SweetProjectCars]

Thanks for watching, have a great day. mad Mike & team

[@dunnkirke]

You’re talking, I’m staring at the snake.

[@SweetProjectCars]

LOL, this made us laugh this morning :) HA! He's a good conversation piece for sure. Thanks for watching (the snake) and being here with us Kirk. Hope you have a great day. mad Mike the hammer SPC

[@speakbigtruth9383]

I use a hand pump sprayer like that used for insecticide. $20 on Amazon. Great video. You remind me of me.

[@SweetProjectCars]

That is awesome! Thank you for watching and sharing, hope you have a great day my friend. mad Mike the hammer SPC

[@jacobgreen6939]

like 5 glon weed sprayer?

[@speakbigtruth9383]

@@jacobgreen6939 2 gallon

[@jacobgreen6939]

@@speakbigtruth9383 thx

[@davidfuller764]

Thanks!

[@paullandry4031]

What does the blaster consist of ?

[@SweetProjectCars]

Click here amzn.to/2OTeLYF you can read all about it Paul. Thanks, have a great day. mad Mike

[@h.d.mech.mortenson2098]

Thanks for the video. Transmission fluid contains detergents which is why it’s used in a transmission.

[@SweetProjectCars]

Thanks for watching and sharing. Have a great day. mad Mike the hammer SPC

[@h.d.mech.mortenson2098]

@@SweetProjectCars welcome. Thanks for the great videos and tips !

[@laschell59]

Thank you. What is Blaster? Is it a brand name? I need to use this on my brothers Chevy truck . Its sat for years and only start the engine time to time to keep it new. Yes its a 350 out of a z camero 69 I did see that the engine that came out is a large nickel block. I never seen one until the rebuild. Now, I want to protect the body..of the truck. So thank you very much.

[@SweetProjectCars]

It's this amzn.to/2OTeLYF Thank you for watching and sharing, we really appreciate it! Hope you have a great day my friend. mad Mike the hammer SPC

[@r.perkins2103]

Funny thing you may like to investigate - My truck had leaf springs 20+ years old that were covered in Lime. Looked like putty or mud, but was almost white. I scraped all that off and the steel was perfect underneath and could still read the stamped part numbers on them. So does limewash prevent rust?

[@paulsosa1872]

This is genius great for boat trailers thanks for the tips 👍

[@SweetProjectCars]

Glad you like them! Thank you very much, we really appreciate it Paul! Thanks for watching, hope you have a great day. mad Mike the hammer SPC

[@mikeyshoemagoo0384]

Here in michigan i know guys that have been putting a couple ounces of atf in there doors and helps keep the rust away but the only thing is it like to collect dirt wherever you put it and dirt holds moisture.

[@SweetProjectCars]

With this mixture, we've never had that problem and we've been doing it for years on hundreds of customers' cars. Thanks for watching Mikey. Have a great day. mad Mike the hammer SPC

[@davidfuller764]

@@SweetProjectCars thanks! Impressive Real world experience

[@Nico_335i_DCT]

Very nice stuff Mike. Thanks for sharing and have a great weekend guys! Dutch regards, Nico

[@SweetProjectCars]

Thanks! You too Nico! Take care my friend. Hope you have a great evening. mad Mike the hammer SPC

[@zippydewdawg5162]

Great video ! Thx for helping me put my rusty fiat back on the road🤠

[@SweetProjectCars]

Thank you very much, it's our pleasure Zippy! Thank you so much for watching and sharing, we appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC

[@jamespike9055]

Pretty sure the blaster is diesel fuel i use it to uncease small engines and clean parts it penetrates rust really well and it also used to be used on logging roads and those trucks never had any rust.

[@SweetProjectCars]

It's actually this amzn.to/2OTeLYF Thanks for watching. Have a great day. mad Mike the hammer SPC

[@LutefiskSavage]

@@SweetProjectCars if that brand name isn't available locally, would Liquid wrench work as well?

[@niconine268]

Sweet. That transmission fluid busts rust big time

[@SweetProjectCars]

It sure does niconine268! Thanks for watching and sharing, have a fantastic day my friend. mad Mike the hammer SPC

[@superque4]

*A follow-up in a year or so would be greatly appreciated.*

[@SweetProjectCars]

We will await your video results! Thanks for watching. mad Mike the hammer SPC

[@superque4]

@@SweetProjectCars No. I was hoping YOU would post a follow-up video in a year or so showing how well your rust killer held up.

[@Lar_ry]

If this works so well how did it get that bad in the first place? Any follow up video? Thanks in advance!

[@zombieapocalypsecherokee9224]

Wow very cool I have a 03 suburban and there is some serious rust underneath I was going to use Corroseal but now I'm using this method. I really like that you can spray it safely everywhere not so with the Corroseal Thanks for sharing 😁👍

[@SweetProjectCars]

Glad we could help! Thank you for watching and commenting! Hope you have a great day my friend. mad Mike the hammer SPC

[@zombieapocalypsecherokee9224]

@@SweetProjectCars Yes liked 👍and subbed and saved to my Suburban videos. Can't wait to do this I live in the rust belt and I'm going to be bringing the Suburban on the beach this summer so I want to address the rust issue before hand. Thanks again for sharing this will be a massive help 👍😁✌

[@zombieapocalypsecherokee9224]

@@SweetProjectCars Hey Mad Mike I'm getting read to do this to my suburban I just have a question can I spray undercoat over this and if so is there any preparation like drying time for the mix or can I just spray over it ? Thanks in advance 😁✌

[@Marcoosianism]

Zombie: Corroseal would work differently ... use it if you want to attack the rust problem and convert the rust to a paintable surface then paint it. If done correctly it should stop any future rust, as long as your surface was prepped right, the corroseal applied right and your finish coat of paint applied right. SPC's concoction is to prevent further rust UNTIL you decide to attack the problem, not INSTEAD of attacking the problem.

[@theandersons777]

I'll try this. Question. If you've been using this why do you have so much rust ?

[@SweetProjectCars]

Answer. We purchased this truck in the condition you see, we are doing a refurb series to show people how to purchase, repair, then sell for profit a vehicle. If you go to the SHOW MORE of the videos description you will find links to all of the videos starting from the beginning, check it out! Have a great day. mad Mike the hammer SPC

[@jonathanyates5198]

@hector nadal did you not read his comment, or just wanting to be an ass?

[@MrPrios1]

I had an old JC Whitney aerosol can with a refillable port. I just poured the mix in there and it sprayed great. I just had to re-pressurize the can after 5 minutes of use. I used the old ATF I drained from my trucks so that didn’t cost me anything.

[@SweetProjectCars]

Nice! Thanks for watching and sharing, have a great day. mad Mike the hammer SPC

[@randydeskins9359]

I also have one of those aerosol cans and keep 50/50 atf and acetone in it. Just shake well before spraying.

[@sonyasimkin522]

Impressive. First timer, here. I’ve subscribed. TU so much. What a blessing!

[@SweetProjectCars]

Welcome aboard! Thanks for joining us, we appreciate it. Have a fantastic evening. mad Mike the hammer SPC

[@s.o.c_914]

Thanks for this. Its going to work amazing in my toranardo gun..between your concoction and the way the Toranardo applys the chemical

[@SweetProjectCars]

Glad to help! Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC

[@MultiTaha007]

How is it holding now ? Also did you undercoat?

[@traumahawk517]

As always I love your video's.......your video's are a real time & money saver...Thank You!! for all of the hard work,time you put into your video's to share with your viewers !!

[@SweetProjectCars]

Glad to help Frederick, it's our pleasure. Thank you so much for watching and for your kind words, we really appreciate it, it makes all we do worth it. Hope your day is the best. mad Mike the hammer SPC

[@tigeri2336]

What is blaster?...

[@SweetProjectCars]

It's this amzn.to/2OTeLYF and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike

[@tigeri2336]

@@SweetProjectCars thanks a lot..

[@trishpipkins]

Dawn is so awesome! This is just amazing to me. I have a rusty bathroom sink that has these little annoying spots that keep popping up and now I know exactly how to kill the rust and banish it for good! Thank you!!!

[@SweetProjectCars]

Absolutely Trish! Thank you for watching and for your comment my friend. Hope you have a fantastic day. mad Mike the hammer SPC

[@martinez1701a]

"And it softens hands while you do the dishes" 😁

[@frankfell6737]

This may be a dumb question, but what is the ingredient "blaster"? Great video, I have lots of projects to use this on!

[@moonolyth]

@@frankfell6737 PB Blaster (loosen bolts)

[@jimbrain1066]

What is the blast er

[@rattedbug5003]

I don’t have the products you mention readily available in my country so I’m going to try regular dish washing detergent and wd 40 I hope it works as this would be a game changer for me.

[@SweetProjectCars]

If you click the links provided in the description of the video, it will give the comparable product for the country you are in my friend. Thank you for watching, have a great week and all the best on your project. mad Mike

[@spozz6633]

So easy to mix it..full with instructions..but I'm still searching the ingredient to make one..tqvm for sharing mate..hope more useful videos for helping a lot of people like me(poor)😂😂

[@SweetProjectCars]

Our pleasure Spozz! Thank you so much for watching and sharing, we truly appreciate it my friend. Hope you have a fantastic day. mad Mike the hammer SPC

[@That_Handle]

👍 Sounds promising. Look forward to the follow-up vid. [Rewinding to get that mix ratio/additive measure now....]

[@SweetProjectCars]

Thank you! Cheers! Hope your day is the best! Thanks for watching my friend. mad Mike the hammer SPC

[@csenior10]

You put your “noodles together”? Is that like an old man sword fight?😂

[@SweetProjectCars]

LOLOL Yes, I think it is HAHAHA! Thanks for watching, you made us all LOL with this comment my friend! We needed this today :) Hope you have a good one csenior!! mad Mike & team

[@christophermuran9487]

The blaster you mention, what exactly is it ? And maybe there is version available. Your vids are well detailed.

[@SweetProjectCars]

It's this amzn.to/2OTeLYF Thank you for watching and asking. mad Mike the hammer SPC

[@tilowol]

Thanks for the video I just did on my f150 under the truck corners bumper

[@SweetProjectCars]

Good job! Thank you for watching and sharing, we really appreciate it, have a great day my friend. mad Mike the hammer SPC

[@jamesblair4454]

Thank you for sharing. The BLASTER.... is that PB BALSTER?

[@SweetProjectCars]

It's this amzn.to/2OTeLYF Thank you so much for watching! Have a fantastic day. mad Mike the hammer SPC

[@melvingrimes7886]

Great stuff as always. Next time I am in Pcola going to have to get you a bite to eat. I am in Mobile so I get over there often lol.

[@SweetProjectCars]

Thank you very much Melvin! We appreciate the view, hope you have a great day my friend. mad Mike the hammer SPC

[@melvingrimes7886]

@@SweetProjectCars A big 👍 to all of your hard work bringing us great content.

[@johnt890]

Thanks for sharing your tips and tricks!

[@SweetProjectCars]

Glad you like them! It's our pleasure. Thank you for watching. Have a great day John! mad Mike the hammer SPC

[@paulleavitt9550]

I just used your method on the rust all underneath my pickup truck

[@SweetProjectCars]

Awesome Paul! Thank you so much for watching and sharing, you will love the results my friend. Hope you have a great day. mad Mike the hammer SPC

[@Gretzky2857]

Do you remember about how much mixture you used? I’m going to use this for my 4Runner, thanks

[@eugg777]

Those Harrison spray bottles work good.

[@SweetProjectCars]

We agree with you utuber! Thanks for watching. Have a great day. mad Mike the hammer SPC

[@pentecost66]

Watching your channel from Alaska going to make up a bottle of this stuff.

[@SweetProjectCars]

Awesome! Thanks for watching and being here with us from Alaska! Hope you have a great weekend. mad Mike the hammer SPC

[@flattopalpha5316]

Great mix. Went back through vid and got exact mix. Confused about only one thing, when you mixed it up you ended up with 1/2 of a bottle. Then on the rear bumper of Zilla, you had a bottle that was full. Since I didn’t see a ton of bubbles in it I’m assuming you didn’t top it off with water. Did you just double all of the original mix you quoted to get a full spray bottle?

[@SweetProjectCars]

You are correct! You can mix up a whole batch of this concoction if you want to :) Thank you for watching my friend, we appreciate it! Hope your day is the best. mad Mike the hammer SPC

[@james1939-s1c]

Make a long term test between this and fluid film/Woolwax.

[@SweetProjectCars]

We have, and for the cost of our mixture in this video, it's hands down the best you can do and once you try it, you'll see what we mean. Thanks for watching, have a great day. mad Mike & team

[@harvestmaid5669]

I'm so impressed!

[@SweetProjectCars]

Thank you very much, we appreciate your view and comment. Have a fantastic day. mad Mike the hammer SPC

[@PaulBodyBuilder]

Linseed oil and beeswax work good

[@SweetProjectCars]

Thanks for watching and sharing, have a great day Paul. mad Mike the hammer SPC

[@jimsmith8817]

I made some using your formula and it works great. I’ve had a spray bottle on my shelf for about three mounts and I’ve noticed the blaster seem to form a sludge like material at the bottom. Sometimes if I shake it really hard some of it will remix partially. Have you experienced any thing like that. Thanks Excellent video.

[@SweetProjectCars]

Hello Jim, just shake it up good before you use it, everything will be ok. Also, try to use up what you mix within a couple of weeks as the shelf life isn't very good. Thanks for watching, have a great day my friend. mad Mike the hammer SPC

[@mannysoto7643]

It's the dawn that does that just take out the clumps and and fresh dawn

[@davidfuller764]

@@mannysoto7643 thanks!

[@brianjohnson4616]

brillant! Way to go Julio...

[@SweetProjectCars]

Thank you very much Brian! We appreciate the view and comment. Hope you have a fantastic day my friend. mad Mike the hammer SPC