How to Make Waterproof Stickers- Dishwasher and Handwashing Test! ✿ w/ Procreate and Cricut

Рет қаралды 13,270

Күн бұрын

Пікірлер: 39

@kawaiifucrafts 6 ай бұрын

Exactly the video I was looking for, thank you! Also, in case you’re not aware, the cricut software has a feature called “offset” which can add the border for the stickers! 😊

@Sundrop.Studios 6 ай бұрын

I did not know!! Omg, thanks! It’s been a looong time since I’ve made my own stickers, so things have changed (for the better it seems!)

@kawaiifucrafts 6 ай бұрын

@@Sundrop.Studios yes, thankfully they’re finally making adjustments! Hahaha It should make things slightly eaiser😭

@PeanutbutteredDailey 6 ай бұрын

If you have the sticker feature available it'll also have some border options as well! :D

@grandinstationerydesigns 6 ай бұрын

Right!

@Fairytaleartcorner 12 күн бұрын

I came here to say the exact same thing 😅

@JupiKitten 4 ай бұрын

Hot tip... if you put matte/regular scotch tape over the black cricut corner marks, it will neutralize the shine and the cricut will be able to read them again. might help save some time having to cut the lament layer to shape.

@dewallkie 3 ай бұрын

I saw someone also color over the register marks with white crayon and that dulled the shine enough. Haven’t tried yet myself but I plan to.

@azizasmith3473 23 күн бұрын

Thank you for the video and the link with products used.

@fsrbori 6 ай бұрын

Gurlll thank u, my stickers never cut well and now I know that is because of the setting

@Sundrop.Studios 6 ай бұрын

Yay! Glad it helped 🤗

@gabbiemakesthings 4 ай бұрын

Thanks so much for actually testing out if it is waterproof an can survive the dishwasher. Exactly the video I was looking for! :)

@doveydaze 3 ай бұрын

This is such a great tutorial. Just made some stickers but was looking for a way to make them water proof. Thank you SOO much for this!! :)

@musegabs 6 ай бұрын

Wowie, video quality just keeps getting better and better~ ❤❤❤

@Sundrop.Studios 6 ай бұрын

🥹 I’m trying ~ thanks for watching 🥰🥰🥰

@BAESDart 6 ай бұрын

Aye thanks for this! Been grinding making my own stickers and I use procreate but then export to photoshop to add the outline and it takes soooo long. This helped a bunch haha Ty

@Sundrop.Studios 6 ай бұрын

YAH ofc!! I hope it was clear enough, I re did this part like 3x hahaha. But let me know if there’s anything I could improve on from an instructional stand pt 🤗

@Rosesbythepetal 25 күн бұрын

What setting on your printer do you use when printing on the matte sticker paper? I have the same printer and sticker paper and the ink comes out wet!

@mullatoflove723 6 ай бұрын

Excellent music selection 👍🏽

@Sundrop.Studios 6 ай бұрын

Hehe thank u!

@reconcilecraftco 5 ай бұрын

Heat pressing the sheet after the cold laminate is genius. When I laminate I sometimes feel like the result can be a little bit foggy.

@Sundrop.Studios 5 ай бұрын

I usually just do a cold laminate, I haven't tried heat!

@reconcilecraftco 5 ай бұрын

Ohh oops i thought you did both. 😆My bad.

@MonicaY-l6l 5 ай бұрын

Which cold laminator do you use? Did you buy it from Amazon? 🙂 thank you!! Your stickers are so cuutteee

@Sundrop.Studios 5 ай бұрын

Thank you!! And yes, I think it’s linked in my Amazon affiliates link in the Description box!

@bowabowadoggo 6 ай бұрын

Thanks for sharing your method with us! I recently started making my own stickers and am very confused as to which paper to use. PPD is a really good paper, but it's a little blue and... Right now I'm using HTV, but I'm concerned about the thinness (it turns out that the matte laminate I'm using warps when applied to thin paper) But after watching this video, I'm still thinking about going with PPD. The problem is that it's too thick to cut properly with Silhouette lol.

@Sundrop.Studios 6 ай бұрын

Im glad this helped you! I am really picky about texture and quality so I think ppd stuff is worth it. And you’re right- it is super thick- a great and bad thing haha I only run it through the rear feeder of my printer

@iranmontesinos3728 5 ай бұрын

Hey I tried the trick of putting the laminate within the border but my cricut keeps destroying my stickers do you have any advice?

@Sundrop.Studios 5 ай бұрын

are all the software updated? and there is a calibration run that you can try!

@Soyrva 6 ай бұрын

Maybe Cricut4 will have a camera like the Siser Juliet. That registration issue would be annoying! I always get a bubble when laminating!!!

@Sundrop.Studios 6 ай бұрын

That’s be neat!

@RBLACKPEARL7 6 ай бұрын

They're nice. If you wait 24 hrs and then use dishwasher, it should come out better.

@427skies 5 ай бұрын

I was thinking the same

@LoriNicolls 6 ай бұрын

You don’t need to put them thru a laminator at all. This is self adhesive & no laminator is required. Just trying to save you an extra step. I’ve been using these sheets for years now with perfect success every time 😊

@Sundrop.Studios 6 ай бұрын

I like using the laminator to get all the air bubbles out, but yes, technically it’s not necessary! I just find that it gets it perfectly, smoothly flattened out. I used to use a roller and do it by hand, but the laminator has been a life saver for my wrists! 😅

@427skies 5 ай бұрын

@@Sundrop.Studios This! Which brand is your laminator? I am looking for one too.