How to make White Exotic Marble with Epoxy | Stone Coat Epoxy

[@StoneCoatCountertops]

⚪ www.stonecoatcountertops.com/white-exotic-marble ⚪ We think this was on of our best White Marble pieces yet. What do you think?

[@docding]

Can you use this for floorings too or do you have a different product for that?

[@StoneCoatCountertops]

@@docding Yes you can do floors with this using our Flooring Epoxy!

[@tinyt6330]

Outstanding! I would love to see an epoxy floor!

[@xmanzii5286]

Hello Addmin one question: Wich resin(brand) is best to make river coffee table

[@kimberlyhenry9740]

Would love to do this on my bathroom vanity. I watched one of your bathroom vanity ones with similar colors. Would this be an option with a bathroom sink vanity?

[@douglasmueller4684]

White marble is stunning.

[@andreaallred2686]

Hey there. Just wanted to say thanks. I'm pretty new to epoxy pouring, about 2+ years. I set it aside about 6 months ago because I couldn't get it right and epoxy pouring mistakes are expensive! About 2 weeks ago I watched a few of your videos, was inspired, and my last 3 pieces have been perfect!!! Again, thank you, Red

[@mark2designs607]

Can you please do some more tops with flat smooth edges? In my area no one wants rock edges. A flat smooth edge is much harder to achieve than a rock edge and I’d love to see more of how you get a perfectly flawless flat edge. Thanks

[@jeremyrfk]

Same

[@billions50]

Stop being a follower and create your own lead. Be the first in your area with rock edges lol

[@TheRealHousewifeOfPG]

You can have any edge you like. You either buy the substrate of choice with a straight edge or you cut the edge straight when you're preparing the substrate for the paint.

[@nroman1977]

I can get my edges to nearly be flawless smooth. The trick is done in sanding. If you time the color coat right your color coat will be thicker when it goes over the edge. Put a scrap piece of MDF behind your sandpaper as a sanding block and carefully sand the color coat on the edge as flat as you can without going thru with 220. Tape back up your edges. Then I do a thin clear about 2oz a sqft to fill in pinholes on the top spread with a 1/8 vnotch trowel so I add a little back to the top and move the material closer to the edge as you chop. Then pull your tape and brush the edges as it goes over with horizontal brush strokes end to end as it comes over the sides. When it cures it will be nearly flat sides with just some minor ripples. Then do your normal clear with 3oz a sqft. Tape up the sides of the counter again for this coat. Spread/Chop/torch and then pull the tape when it's still warm and it will flow super smooth. It will stop dripping before it jells but be super smooth. The edges of my counters have less ripple than my Ikea high gloss cabinet doors.

[@shannabarton5748]

@@nroman1977 Did you sand the top too or just the edges?

[@jettstark253]

I just purchased the white exotic marble kit because I saw this video and liked this countertop. Thank you.

[@bettytuohy9875]

I'm so thankful I found your KZbin channe after watching videos for 8 hours I came upon yours, thank Godl, I'm getting ready to redo my kitchen. So now I'm watching all your videos and I'm going to use your product. Thank you so much for making these.

[@arosefortes6507]

I'd love this in my bathroom on the countertop! With the diamond dust in it I bet it looks luxurious and they have an array of colors to choose from depending on your space and style

[@thetastytruth217]

I absolutely love your enthusiasm & professionalism. It's very important to me to have a refined smooth edge ... I generally love the earthiness, but I'm in need of the least amount of bumpy edge as well... I'd love to see if you would finish with a different timing or a different frame of some kind instead of the tape or if you would actually go back sanding and buffer. Please let me know how you do your magic. Thank you so much !!!

[@annamontone8952]

I would like to see you do something with mother of pearl flakes in epoxy.

[@StoneCoatCountertops]

That's a pretty cool idea! Have you done that yourself yet? How did it turn out?

[@annamontone8952]

@@StoneCoatCountertops no, I have the flakes to do it. I just am not sure on the process. Would it still be the same. It won't damage the flakes?

[@mvl5762]

Where did you get mother of pearl flakes?

[@annamontone8952]

@@mvl5762on Amazon

[@dazed_and_amazed1296]

I would love to see this!

[@itsrvlifenowornever6827]

Love it! My husband wants a blue vein in it. This will probably be my 1st experiment with Stone coat. Then the sky’s the limit!

[@monkeyseemonkeydo9759]

Can I hire you to breathe life to my old granite countertops? Love your techniques and beautiful workmanship. Yes, I am serious.

[@theromancediva]

This is absolutely beautiful! I am going to copy this recipe but with darker tones rather than lighter for my dining room table. My cabinets are white and my countertops will also be white after I epoxy them and so the darker greys, black, and subtle whites in the table will look so gorgeous!

[@sabinarjinari8647]

My husband and I love your work

[@StoneCoatCountertops]

Thank you Sabi! What's your favorite video of ours so far? -Nathan

[@tomiko2683]

This is the type of white marble look I want to achieve in my project 😍

[@StaleBearFart]

Did you?

[@1161909]

that is sick! this totally takes the fear out of trying to do a foux finish, unbelievable thank you so much.

[@StoneCoatCountertops]

Right on happy to help! If you have any questions please give our project support a call🙌

[@davidbeers5386]

I bought me this exact combo today. I can’t wait to see the results

[@yemnycastillocordero5004]

I finish my backsplash last night... i love ittt

[@jodiadkins8136]

This is the goal. I just got my supplies from you. I’m so stoked about this. I can’t wait to see the results.

[@Confettish1]

How did it go?

[@sheilafreeman423]

How did your project turn out?!

[@shannabarton5748]

Also I would recommend practicing on something like a table or even just a sample board. We messed up on taking the tape off at the right time and now we have big bubbles on the edges. Top is amazing.

[@vickypatton1775]

Love this!!! But I would like to see you do this on countertop that is attached to a vanity.

[@sherrysweet4574]

I am so in love with this demonstration. I'll be trying it for my kitchen remodel. Wish me luck.

[@orvillewilkerson5432]

Love yall, the game has changed in counter tops, thanks to u guys!

[@orvillewilkerson5432]

The other thing I like is yal back your items by showing the dreams that people have and CAN do with them! Big , Big Thanksgiving Orville

[@yemnycastillocordero5004]

I love this one...... i finish my backplash las night.... uct is amazing.. little texture but i love it.

[@dienekes4364]

This is EXACTLY what I want to do for my next kitchen.

[@michelleshawgo6217]

This is what I need to do in my kitchen when I finally have one again. Had a custom cabinet contractor leave me without a kitchen back in February this year. It's taken a while (since that failure) to get this situation remedied via big box store, and I'll finally have cabinets delivered 1/13/22. But now their countertop vendors are taking up to 10 weeks, so if I wait on THEM, it'll be a year and at least 2 months WITHOUT a kitchen. I saw you guys in my FB feed recently, so I started following you and soaking up all the great stuff you've been putting out there, and I thought "hmm... I could do this... I'm really handy..." My cabinets will be dark-ish, so I need something like THIS to offset that. After being left without a kitchen, AND the initial deposit I gave that thief, it's costing me more than twice what it was supposed to, to fix what he left me with. SO... I'm seriously contemplating tackling the countertops on my own, to avoid the total cost reaching 3x what it was initially supposed to cost with the guy that no-showed on me after my kitchen demo. Love what you put out here for us, and really hope I can pull it off if I try this. Templates first, of course! 😁

[@marywhittle3759]

Still love this one. I'm not ready yet, but this mix is what I'm looking for. Thanks!

[@rosalindalopez4417]

I'm so absessed with all your work

[@StoneCoatCountertops]

Thank you so much! We hope we have inspired you to create something amazing with our epoxy! -Nathan

[@duviana921001]

Beautiful!! I love light colors, they look elegant!

[@sincerelyyoursinvitationsb9827]

Very nice! I’m glad I found your channel, but I can’t stop watching your videos. Warning: they are addictive! 😉

[@MommaBearsCorner]

love beautiful bright white. it brightens the room so much and makes it look larger. just should use ART or UV type so it wont yellow!

[@virginiabodescu7280]

HI, I just discovered your channel and I am very excited! You are very skilled and I love your models. As I am going to redecorate my house, one little question: Can I cover my tiled floor with epoxy? I understand the technology, I know what I want, but under the tiles there is a heating system and I don't want to loose this advantage. Does epoxy have thermal conductivity?

[@ernesthigbee8756]

Nice-Job. Just sent my customer your way, we are from R.I., love this product. You guys, make it easy for DIY'ers...

[@jefferyjunkin9808]

So for this style do you not trowel and chop? Does it level itself out?

[@jmac4952]

This guy loves what he does. It's obvious. And contageous. Bravo!

[@HiTechDiver]

Very impressive. I installed cultured (or "engineered" as some people refer to it) marble slabs in my Mom's bathroom shower, and was thinking of doing the same with my bathroom. After watching this video I am rethinking that.

[@PaulPeck]

Love it man!🔥🙌🏼😎

[@StoneCoatCountertops]

Thanks, Paul!

[@methewho7040]

love your energy and the results

[@coreyobr26]

Make more videos!!! Lol Seriously can't get enough of them. Great product, i can't wait for my next project.

[@StoneCoatCountertops]

We will! Thank you for your kind words! What's your next project?

[@coreyobr26]

@@StoneCoatCountertops i am building a coffee bar in the empty corner of my kitchen

[@wifemamateacher]

I absolutely LOVE this look, and the great instructional video, but…the edges! Do they cure smooth? Rough? Do they need sanded? I would love to know what steps to take for a smooth edge (seamlessly blended from the top of the counters), but haven’t seen it on the website instructions or in this video-is it possible to achieve what I am describing? Any help would be greatly appreciated-thank you so much for your time!

[@dawnwellman6232]

Love This.. Exactly what were looking for Will measure and order this kit for sure Thank You for this video 😍

[@rwp2418]

Would love to see a hunter green solid with diamonds and other things to make it pop. For my hunting cabin but keep it just hunter green. Thank you very much. RWP2

[@howieisboss]

You guys are freaking awesome!! Can't wait to use some of this product for the first time on our bathroom renovation!! Keep up the excellent work.

[@StoneCoatCountertops]

Thank you so much! You Got This Austin! Please give our project support a call if you have any questions.

[@jordanmichael7104]

Please do a piece that includes both silver and gold highlights.

[@v.j.cooper2007]

YESSSSSSS.... I LOVE THIS ONE TOO!!!!! IT'S THE PERFECT COLOR AND PATTERN I HAVE BEEN WAITING TO SEE FOR MY COUNTER KITCHEN MAKEOVER FOR SUMMER 2021!

[@sdowning533]

Question: You did not do an additional coat like on other videos; Is that because it was an exotic pour with 5ox per sqft or was that a mistake?

[@jacquelineq5725]

Love it !! I have to say your video presentations are BANG ON !! Very well presented, you provide thorough instructions which include curing times, measurements and pro tips !! I will be redoing my bathroom countertop and will 100% order my products from you.

[@brandonhoward2004]

Well ya got me, my wife is heading away for two weeks so looks like im redoing our kitchen countertops with this pattern, then wil finish the cabinets next week in a dark mocca stain. No experience so wish me luck. Your whole team and you are awesome 👌, love the videos.

[@StoneCoatCountertops]

Sounds like a great project! You Got This. Let us know if you need any help! - Lauren

[@cathyscabinets440]

You should know you will have to redo it anytime from 1 month - 3 years later because it WILL YELLOW. They don’t mention that in this video but if you ask him about the yellowing they’ll tell you that it does and that they suggest not using white

[@PerfectionHangover]

@@cathyscabinets440 in the video he mentioned that this formula provides NO yellowing. I’m surprised by this

[@carloscortes4312]

This is excaxly what I need just, more white and some earth tones.

[@friederhofmann6747]

Did you help mixing with a torch and did you use a torch to remove air bubbles?

[@lilyLily1824]

Ive changed my mind yet again! I LOVE THIS!

[@gibbyswife9218]

I LOVE THIS! Thank you for sharing this video

[@xpmezaxpmeza7783]

white exotic marble im going to order it soon

[@StoneCoatCountertops]

Here's the exact recipe we used to make this! www.stonecoatcountertops.com/white-exotic-marble-kit

[@nicolerhiannon333]

I just bought the white marble kit from stonecoat..... why are the epoxy not the Art Coat in the white marble kit? Ugghh. When I received the package I thoughr I could get started but read the instructions & need the bonding primer. Couldve been mentioned before I got the package. I want my counter to last & am frustrated.!

[@andyrowe9989]

This Is the one I want to use for my kitchen!

[@StoneCoatCountertops]

Great choice Andy! -Nathan

[@abelabraham230]

Great mable job I do mable restoration bt i think epoxy is easier and faster Thanks with ur great job am really learning alot

[@stevearmand4873]

I finally got around to ordering some of your clear coat epoxy. And let me just say, it well exceeded my expectations!!. I made a version of the carbon fiber table you made, and it is coming out amazing!,,, thanks again!!

[@StoneCoatCountertops]

We'd love to see that! Are you a member of our insiders group? You should post your pictures/video there of it

[@stevearmand4873]

@@StoneCoatCountertops I just added the final top coat and ordered some legs. I am not part of the insiders group. Let me know how to join and I will post it up when it’s done. Thanks again.

[@bogus_not_me]

This white exotic marble is how I would like to refinish the bathroom counters, but I don't know how to do the sinks. Do you have a video that shows how to do that? Counter and double sinks...

[@cooper8318]

Same method as this video but you will need to remove your sinks and create an additional tape dam in the openings. Then when you untape the sides and smooth them out you will untape and smooth the sink holes at the same time. Let it cure for a few days then reinstall sinks

[@TheKentuckylady717]

Beautiful.....what more is there to say except wish I had it in my kitchen......my Daughter does too.....:) Looks like you do good work.....

[@jonnyjonbo]

This looks amazing👌🏼Your the best

[@ttanay7363]

Love this! I'm thinking this will be my new dining table top!

[@oumaimibrahim6869]

My friend, your work is great and I love accuracy. You are successful. I ask you, did you not make the wall epoxy as beautiful? Is the epoxy board easier? Thank you

[@okhoneybee]

Oh my gosh! I love this! I would love to do this but it terrifies me!

[@jbb5470]

Love the look! BTW, really enjoy the videos with you in them, the best!

[@StoneCoatCountertops]

Thanks JB! Have you had the chance to use our epoxy yet? -Nathan

[@jbb5470]

@@StoneCoatCountertops Not yet. The only place I have to work is in my garage and its pretty cold and wet here in the NW. Waiting for spring / summer time frame. Thanks for asking

[@richardhingle3634]

Would love to see a video making a verdis gris finish for marble so I could know the exact shades of color...

[@MrBruce0777]

You mentioned a few times to heat your Epoxy up to help it flow with a space heater which I do not have but I put the "A" Epoxy in the kitchen sink and filled it with very hot water for an hour ahead of my counter top pour. Now that I know it works I'll heat up both parts A and B next time. .Well worth the trouble epoxy flows ever so well now. Flowed extremely well when I tilted my work. Worked out great poured like magic. And I also after mixing all my colors in small cups poured little one inch rows of each color across a paint roller pan instead of the big bucket.. I did a white flood coat on the whole counter to be sure it had full coverage and the rest of the exotic dirty pour just flowed on the counter top easily. I did a one inch row of white across the pan then below it a one inch row of grey across the pan below that another off white with grey white paint .I did like four rows in the pan and then I poured it on counter top. This is more time consuming but I feel it's worth the control you have keep colors separate and you get to see how your colors are being laid out on the counter so now you can add darker or lighter colors ahead of time in the pan and place them where you want them.. I loved how the colors hardly mixed with each other until the instant I began to pour them out. .LOL My wife did not want any black in counter and wanted a small streak or two of black. When I was pouring the grey cup out I used your mixing method to have a single drop of black dye on the edge of the cup and just barely let the Epoxy touch the black dye to make grey. So I quess i turned the grey cup and It poured out of the black dye sitting on the ups lip and BIG lol I got a pretty black streak that i loved. and the wife liked it too... After I was completely done, Like 3 or four hours later I poured of what was still in the cups and i made a sample board. wow ! talk about a long working time. .that is iN SMALL AMOUNTS never let it stay in large amount longer ( a quart or over more ) than 4 minutes or so Get it on your counter top or small cups ASAP ! Shockingly I had about 3 or 4 ozs in a cup from the pours from the day before and it still like the minute I poured it Like 14 hours later...I would not have believed anyone if they told me no way love it

[@sofiahayat]

has your white gone yellow? all white resin goes white

[@MrBruce0777]

@@sofiahayat I've only had my counters a month. LOVE LOVE LOVE them. Mine have the gloss top coat UV protection.I doubled the water to keep down the matte finish and they are smooth to the tough. So far so good

[@user-iq4pp2tg2b]

You guys are awesome I love watching you guys. I’ve been learning from you. I have an artistic side but I’ve been a builder for 20 years and this has changed the game for me.

[@tracytaylor2943]

AMAZING MARBLE, I LOVE YOUR ENERGY!!!!

[@lizamaesoribello613]

Woowww... Amazingly beautiful , I like it .... Thks for your great creativety ... I want to use that recipe for my House Flooring.. 👌👍

[@Phyllyps-Levine]

I have called the office in Oregon many, many times over the past few weeks and just stay on hold.

[@chrisd5383]

I had the same issue. Leave your number and they’ll call you back. It took them 30 mins.

[@plooms1]

Wish I could add a picture did mine today top turned out beautiful didn't take take off edge soon enough so have to redo the edge🤦🏼‍♀️

[@rosalindalopez4417]

Man your work is awsome

[@shantemcgee71]

I have two kitchen tables to reface. I will be using this technique and purchasing your products. I cant wait to tackle this project and will share my photos. Your work is amazing and you provide excellent easy step-by-step tutorials. Simply the best Mike! Keep the videos coming.

[@StoneCoatCountertops]

We would love to see your work!! You got this Shante! -Nathan

[@shantemcgee71]

@@StoneCoatCountertops absolutely I will certainly share and thanks Nathan for the encouragement! 🤗

[@dredre9054]

Can this be done over typical laminate countertops? If so, would prep be different?

[@JorgeSanchez-hu2xh]

Stunning sir, looks like real carrara marble...

[@johnnybonee9432]

Do I still need to trowel this out? Or will that mess up the patterns? Do you recommend troweling it or using a heat gun to push it and help it level out?

[@guerradan1958]

Did you use the torch to remove any bubbles?

[@petervalentine4602]

Love your energy.

[@yunfengli9768]

안녕하세요 선생님이 창의력과 도전에 감탄합니다

[@cexar710]

Thinking about doing my kitchen counters, it's a small kitchen with 40sf of counter area. What would I need for such project? Was looking at website but asks about kitchen size not sure what category my space falls into, thank you.

[@AngelasMixedMediaArtist]

Wow Mike love this beautiful Marble.

[@roberthertzberg4421]

I love it. It would look great in my kitchen.

[@barbaramitchell1662]

This is beautiful!!! This will be my kitchen counter tops!

[@StoneCoatCountertops]

Yes, You Got This Barbara! Have you had a chance to use Stone Coat Epoxy?

[@barbaramitchell1662]

@@StoneCoatCountertops I used the stone coat resin. Will be purchasing the whole kit for my kitchen counters. But could you tell me how you would stonecoat a tub surround on a tub jacuzzi that is already in place

[@ivonnelanza4701]

Awesome, I dream of doing this to my granite counter

[@dorisreynolds7057]

Gotta try this one. Will be calling you guys soon!!!

[@chefwawa]

You're an artist! Subscribed.

[@carpos]

Una belleza bro. Saludos desde tucuman Argentina

[@michaelm5601]

Most of all I love your enthusiasm, this is one of my favorite finishes. Thanks Mike

[@StoneCoatCountertops]

Thank you so much for watching! Stay tuned and subscribe for more amazing content headed your way!

[@katybudz]

Is this the same process for bathroom flooring? I love the light gray & white!

[@Aurora-ln4sn]

Gonna use these on my school bus conversion these look amazing

[@irenesantamaria254]

So no blow torch needed on this one? Absolutely love how this came out!

[@robbobcat7286]

Billy Mays! Super shine might be good for some but what about a Mat or semi gloss finish?

[@shannabarton5748]

I wish you would have a video to show how to do a redo of your epoxy pour. We did a pour yesterday and I am not happy with the results. Need to fix one little spot on the edge and the bubbles on the edges.

[@69reasons2bwm]

I'm in brethren. Looking to move to Arizona soon and bring a different look to the west coast 💯

[@deloresalexander2965]

That is beautiful I would love to try this on my counters!

[@jjginnard]

I AM A NEWBIE and I have been watching ALL your videos, I am so excited to try this I just don't know how much I need for a 60/sq ft area? Can you recommend what product to use for a light grey marble look?

[@jariselisis760]

I love it. I'm gonna try this on my kitchen counter top

[@StoneCoatCountertops]

Glad you like it! You Got This, give it a try on a few sample pieces to get ready for your countertop🙌

[@zreiser]

I'm thinking of creating a shou sugi ban integrated counter and sink, finished in clear epoxy. With all the angles, how would you coat this? Chop brush in several coats?

[@aminaparker2140]

Amazing

[@danmaldonado9112]

So “out-of-the-blue”... I have an old refrigerator that works great however, it’s showing it’s age. I was thinking of applying your epoxy to the old lady... would it work?

[@aletheakelly1010]

Rustoleum makes appliance epoxy. Paint on w a de-linted roller. Acail on Amazon.

[@ginadivine1841]

Outstanding !!! I want to do my counters this way the same colors 🥰🥰🥰 Beautiful

[@StormyMonday0896]

I want to do a matched back splash. Can you share a video about this? smooth edges and sparkling marble.