How to master HORIZONTAL stick welding? | 2G Back Grind

[@weldtube]

👇WeldTube Store👇 www.weldlife.com

[@isara3534]

Hi. I'm a welder and I teach English through your videos. I understand you the most

[@georgejacinto8209]

My 2G test is a 3/32 gap between the plates using a 6010 for the root pass.. wish my test was this easy

[@lowkeyk4216]

I saw this and was damn that’s way easier than the shit I have to do..my test at school is the exact same as yours

[@southernvader]

Same

[@matlocke132]

Same

[@SmotheredDreams]

Same.

[@jaybucket2374]

Damn we gotta do a 1/8 inch gap

[@Thomas-nm7fu]

Horizontal overhand was my favorite position but overhead was a close second. 27 years, I welded on everything from structural, ornamental, mechanical and was also pressure vessel certified. I use to build airvac tanks for cruise ships or basically anything that processed waste. Those tanks moved material at 2700 fps. Ever seen a ballistic turd? Lmao true story. Mild, tool steel, stainless and abrasive resistant. AR plate is pretty amazing stuff. SMAW, mig, tig, oxy acetylene and brazing. I loved doing my job. Built some pretty awesome machines. Worked some very prestigious jobs but hands down my favorite Old #7, largest blast furnace in the western hemisphere. Produced 7 tonnes of steel a minute. Stood 360 feet high and when they knocked the bottom out of it, that shit was spiritual! Feeling the ground rumble and the roar would reverberate. An incredible feeling to experience and years later I can still feel it. ISG is an incredible place to to work. Makes a man remember just how small we really are. After a broken neck and back I can not do it any longer but hands down, I loved my job. Worked jobs all over America. That being said I fucking hated welding anything with 60 series electrodes. I'd rather slow jerk a mall Santa. Welded millions of square feet of decking with 6022 but other than that, 60 series is nothing more than a coat hanger trash rod. Thinking of going back to school to obtain a AWS CWI. Maybe one Day but for now imma arm chair welder lol so get'er done or take a soap stone and write hard on it and I'll get it

[@Mh976]

Very informative. Directions were clear. Good qualities of a teacher.

[@bryce9219]

I’m so happy you added that’s slag removal that was super necessary and satisfying as hell. Y’all are great thanks for the guidance y’all kick ass ✊🏻

[@LuisAdregoDigitalArt]

I always did that position using a 2.5mm 7018 for the root and for the hot pass and cap with a 3.25mm 7018 but the technique is literally that spot on you guys are 5 stars 💪🏻

[@BassBulletinBoard]

Got a sub from me, you are a excellent teacher, I've tried watching other people and this by far is the best explanation and filming.

[@shezho-zoldyyck9883]

You do the same video but on 3G and 4G STICK please 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼 greetings from Chile 🇨🇱

[@bobbyledford1957]

GREAT TEACHER! GREAT VIDEO FROM a Old School WELDER , EXCELLENT WORK!

[@RickAShriver]

Thank YOU for taking the time to show this!!!

[@AlAl-dz8im]

Good explaining only input I have to give. Is that the camera man should have showed the puddle so it can give an idea of what is going on with the puddle when you are welding

[@ShadowMaster_6]

His a great teacher he really helps you and he would tell you where you made your mistakes and show you how to do it in so many ways and the school is amazing and the people are friendly and helpful south coast welding academy is a school worth going its worth it if anyone is thinking about going don't be afraid to go if you got a diploma or don't you still can go if yall work no problem they got morning and evening classes and no i don't work there anything im a student who is attending right now

[@bucknakey7009]

how much did it cost for the class and how long was it?

[@anandsurujpaul5690]

Rodriguez you are a boss in welding !

[@jasonjones5614]

Do you have a video where the camera is on the other side so we can see the toes better as you are welding.

[@jesabe4672]

You explained did a great job! I understand what to expect now, Thanks!

[@daniellucas7715]

I always learn from you guys!! THANK YOU!!

[@viridianalugo90]

Very good video Rosendo

[@albertoguerreiro006]

muito bom !! nice to see this young generation , with much love and atention to details , nice video my friend , 🇵🇹🇵🇹🇵🇹

[@gulenator]

Good looking welds, will keep some of your tips in mind on my open root grooves

[@dodikirwantono6619]

Hi Rosendro. Right now I am a student in welding class. I am having 2G practice. When I am doing it my hand always going down after some minutes from the starting point. Please give me tips how to keep my hand go horisontally. Big thanks dude

[@mauropenafiel6503]

Making a bead from right to left and the over pass bead coming from left to right it will making stronger or successful welding ???

[@MorganIsove]

Like your videos please can you demonstrate some for overhead welding and vertical up.

[@robchesley4591]

Is this back grind method intended to be full penetration? I always assumed open root was needed. Especially using 7018 over 6010

[@elisain777]

Atención!! Una sugerencia, me encantaría que hicieran vídeos en español ó como mínimo le pusieran subtítulos, habemos muchos latinos siguiendolos y se los agradeceríamos muchísimo! Me encantan sus vídeos, me han servido muchos consejos, por favor pongan subtítulos la comunidad latina se los agradeceremos en gran manera, saludos colegas.

[@gto9485]

I'm new to welding but I don't know how to configure the welding machine in 2g because the rod doesn't turn on but if I put it on the table it does turn on

[@Winterheart786]

You are a good teacher

[@kenroythomas7783]

You are a good teacher. Love it. Love to stay contact.

[@clockbreak7245]

I can't find any of your videos about 2g open root with 6010 as a root pass. Is this vid still the same concept if it's closed?

[@larrymasterspowerbuildingc4477]

Thank you for taking questions. I rally need a bit of help for my next block at welding school where the grading gets more strict. Please, when you say that you always push, ar you not dragging the 7018? and i need help popping off--finishing the bead. it always looks like shit. how do you do that?

[@mariomendez9950]

Great how to video weld tube. I was wondering if y’all can do one on how not to get undercut on my root pass on pipe of course thanks. I was at work and got a report back from QC and their only concern was I had some undercut on the root pass

[@gavinhughes6054]

kzbin.info/www/bejne/oJjdh2WjhrCaoc0

[@gavinhughes6054]

kzbin.info/www/bejne/oJjdh2WjhrCaoc0

[@micmike]

That was a great example, thanks for the sample, example.

[@jenrick4804]

Rosendo, what sleeves are you using brother? I've been looking for good pair, as my old ones are falling apart and the leather shop I got them from closed down. Thanks!

[@sakaalang9326]

I love what you do a lot

[@mmcbeatch]

Can't wait to get in the shop and practice this technique

[@NydiaRodriguez-eq1iw]

That hood is 🔥🔥🔥🔥🔥

[@joseherrera4441]

Can you give my tips and something to do it more better my welding plate test to next time l feel my test yesterday the 3g plate welding tesr

[@cellanddanielle]

Are you using a cutting wheel to grind the bottom bevel?

[@adamcassidy7067]

Does anyone know what the preparation angle of the bevel on each plate is. Thanks

[@LilFish0]

Rosendo is an amazing welder

[@haydenkamits1710]

I’m doing a 7018 horizontal stick cert test and I’m getting slag in my root every fuuucking time and don’t know what to do I keep on failing these tests because of it

[@MAR210TX]

What's the degree of the bevel? So theres no gap at all inbetween the plates? 🤔

[@Banjoandguns]

You grinded that root pass immediately

[@davidsinfaa6405]

I thought we don't weave when welding in 2G, why tiny small circles?

[@JoseJimenez-kt1rv]

I like this guy 😂

[@martintorres4026]

Very good, since Colombia thank you, send more videos

[@robertsalinas690]

Are you doing a push? Not a pull? Been having trouble with this and vertical up can't tell the difference between flux and puddle

[@MrRudy1968]

Hey bro I’m in the industrial world and planing to go to school for welding Quick question why do they use an XRay to pass the weld please enlighten me, hoorah Simper fidelis

[@Useruserusername790]

The fuck is the "bro" shit? I never heard anyone use Bro till a few years ago. Now suddenly everyone is saying bro. Y'all follow Fads that hard?

[@rodolfoguzman8974]

The horizontal doesn’t take a gap?

[@sakaalang9326]

But please how can I master all the Amps that will be used in every steps ??

[@mrillis9259]

Grind both parts back to back. Makes matching lands on the bevel.

[@meowniaw3999]

hello newbie student here do i need to cool it down before grinding it?

[@jeffaboularage1450]

Not pertinent to Stick, but can y’all do a 2G on some big Dual Shield production wire, like 3/32 or bigger.? Love the content!

[@olddawgdreaming5715]

Good job, thanks for sharing with us.

[@groguwelding]

can you do one with a 3/32 gap

[@arwinvictorio502]

Yes sir we want to see your 3G & 4G position if possible more videos to come wish you all the best

[@kelvinwilliams6999]

Good info. What safety glasses are those? Thanks.

[@ramcycapanas1408]

More power and like the video from the Philippines

[@jessefranco4843]

Should I still know this? Because right now I’m only 18, and I’m a senior in high school still, even though I I have welded at my school before?

[@Ruben901]

Yes, you still need to. Its part of the course

[@luisantoniomonroyp2714]

Ok guys nice video but can you teach us wich one is the real way to welld structure with 7018 plz give me some answer. Ty.

[@sammyvenable8907]

7018 3/32

[@hubertrobinson8825]

Thank you that was very educational

[@basiltrim85]

This was so important for me! I already got to have some electrodes to smash.

[@leahjimenez8213]

Nice job sir

[@lionelperea8797]

Se gue estos videos ya tienen bien tiempo pero son de buena alluda para los que estamos comenzando em esta profesión mil gracias

[@mattyd337]

Do you know what a circle looks like?

[@adalbertolugo9390]

Good job keep it up boddy!!

[@janetchacon5102]

Chingon !!! Gracias Rosendo

[@paulwest4424]

Our procedure calls for 1/8” gap for plate. Doesn’t say anything about a landing for all positions

[@MrPuusilima]

Bro had a insane undercut 😂

[@Useruserusername790]

Explain undercut. Say something other than too cold.

[@Tx_coyote]

How you get that helmet😪

[@jackgarrett9563]

I think I missed your bevel angle? is it 50?

[@Weldingprobably]

30 to 33 degrees for me

[@jackgarrett9563]

@@Weldingprobably ok, so about a 60 degrees total

[@alanmamud8682]

Me gusta este video , espero hagan uno así en español. Good

[@polaroidbear2982]

Why 130 amp on 7018?

[@mckeeveryac7857]

do you let the plate rest in between passes?

[@cellanddanielle]

🤷🏼‍♀️

[@Kevin-is-here]

Thanks for the info 👍

[@ndemarceline421]

pls ur teaching is amezine

[@farmerx165]

i didnt get to use a grinder during the weld out

[@renoschneider145]

Key words “during the weld out”🤦‍♂️

[@HighImNick]

What do you mean by weld out? I am new to welding lingo so I’m just curious

[@renoschneider145]

Tarantula Fingers he means the actual process of welding the coupon out, from the point of getting it tacked and put in position and bought off to begin the test. lots of test shops will not allow you to use more that a file and wire brush during the test to assure you are cream of the crop!

[@HighImNick]

@@renoschneider145 Thank you, that makes sense

[@Mr215Alive]

WELDTUBE: We need a video on how and when to add filler metal. There are so many gtaw vids but they all show the torch only. I'm having trouble feeding rod. PLEASE HELP!!!

[@Ruben901]

You really want a constant feed into the weld puddle if your burning hot. If your welding cold, just dab into the puddle. Im sure some internet expert welder will answer this.

[@Unstbecsta]

I feel kinda lame for it but I really appreciate the “ladies and gentlemen” like…thank you feels nice to be included 🥲

[@jerryhammack1318]

Some of the best welders at our company are female . Gender is not in the equation! Welder ! Also as a side note . Most tig and heliarc specialty welders are female ! 👌! Bless you all and stay safe out there!

[@HaroldBluetooth-uz1zz]

@@jerryhammack1318Lol! Shut up! Women need to be at the house taking care of the kids. Leave the real work to men like god intended.

[@batuhanturgut4007]

I can smell it. sometimes weld smells like burning green pepper and I can smell BBQ after all :)

[@vendetta1306]

It's weird not seeing a gap for the root

[@josephjenniges1052]

Let's see some thin wall pipe with the stick welder

[@Ruben901]

Stick on thin wall? Why not mig or tig?

[@zacheathcock5139]

Why not just drag it? I drag and get the same look and passed for 2,3&4 g backgrind. Granted not everyone is the same.

[@user-nn9xe6el2i]

Did u have a gap or no? I have the same tests coming up if FL

[@djdelgado6443]

Thanks man

[@slametpanelbox973]

🌸👍👌 halo teknik dalam pengelasan Bagus👍 salam dari 🇮🇩 Indonesia go jop

[@johndeepfreeze8514]

very nice!

[@hotakeke6802]

for me it’s the root pass but eventually i got the hang of it

[@johnbrennan4759]

It looks like the gap closes up

[@josejesussimancas5584]

Todos sus videos son muy buenos pero me gustaría que fueran en español

[@1978garfield]

Great camera work! We probably have a better view of the puddle than you do.

[@golonghorns9635]

It would be nice to see a video on how to do a tie end on tig if you were to stop on walking the cup

[@joshstaley7459]

wow why not just put in a root tack and run a root?

[@dans8169]

Don’t learn to weld straight by grinding lines. If you can’t see get a better hood. That is also the point of leaving the bevel edge it is a perfect straight edge.

[@bizzieballa]

pretty sure you cant use your grinder esp of this is for a structural test

[@dallasgearsgodpettman1941]

I’m technically stick welding with my tig torch with the amount of sparks that fly off it...

[@drl5188]

How thick is the plate?

[@cg99th28]

I want to see a video were you weld something thin and rusty as hell something more complicated

[@cesararmandocasas7986]

Yo that cap looks rough g

[@josephaguirre6187]

So hold on.. your gonna take it..right?... on each corner???

[@benserhanibachir4697]

ممتاز